Solaris on AMD K6-2 processor

Can solaris operating environment(7,8) run on AMD K6-2 processor?

First configure the Solaris partition to use 95% of your hard drive. The remaining 3 to 5% needs to be assigned to a Solaris partition. However, please note that even though you have about 98% of your hard drive left, you can only use about 98% total space on your hard drive. If you try to use 100% you will get an error message. Its the mathimatics that gets you and the rounding errors, etc. So you have to sacrifice 2% of your hard disk, but its quite small and insigificant. FYI If you use IBM 75GXP IDE series hard drives, I believe the biggest hard drive you can use it their 75GB hard drive without any problems.

Similar Messages

  • Ffmpeg installation on Solaris 10 AMD opteron processor

    Hi All,
    I would like to know whether ffmpeg can be installed on Solaris 10 AMD opteron processor.
    -BR

    I've had the same problem when trying to install it, in my case the disklabel was created with parted and caused the problems. I've relabeld the disk by booting into single user mode from cdrom and executing these commands:
    # dd if=/dev/zero of=/dev/rdsk/c0t0d0s0 bs=1024 count=20
    # format
    (select the disk ('0') and 'label' it)
    (verify the label and quit)
    # reboot
    (installation questions)
    Preparing system for Solaris install
    Configuring disk (c0t0d0)
    - Creating Solaris disk label (VTOC)
    Creating and checking UFS file systems
    - Creating / (c0t0d0s0)
    - Creating /var (c0t0d0s1)
    - Creating /usr (c0t0d0s6)
    [...]

  • Solaris support AMD

    i am new in solaris.
    I am trying to installing solaris in my laptop. it have AMD processor and 126 MB RAM
    but it's not installing. Is solaris support AMD ?
    If I insalling. the CD is talking (booting) .and the first screen is comming. it's stucked there. not going inside?
    can u please give me instructuon to this problem
    Thanks

    Hi,
    Make sure u r not using the sparc version Install disk.
    Cheers,
    Solstice.

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Chipset Drivers for C855D-S5320 using AMD E2-1800 processor

    Rebuilding to Windows 7. Install went fine but know in need of Chipset Drivers for the AMD E2-1800 processor with built in graphics. Scoured Toshiba but could only find Intel drivers. Similar luck at AMD. Any suggestions where to locate drivers?
    Solved!
    Go to Solution.

    Satellite C855D-S5320 (PSCBQU-00E007)
    You're in luck! Somebody has posted the drivers required for this model.
    Satellite C855D-S5315 (PSCBQU-00F009)
    Since they share the part-number family (PSCBQU), the same drivers should work.
       How I installed windows 7 on a Satellite C855D-S5315
    -Jerry

  • How to install webgate on tomcat with solaris 10 AMD 64bits?

    Hi Experts
    I need to install a webgate on the webserver tomcat, but i found that installation is not possible because thes is not webgate for tomcat, many people recommended install a reverse proxy with Apache or OHS but i can't find a webgate installer on Solaris 10 AMD 64bits.
    Exists that version of webgate? or exist a workaround??
    what is your suggestion??

    Choose the Webserver and the WebGate from the OAM support matix.
    If OAM does not have WebGate for the platform where you have tomcat installed, if it is an option, you can install a webserver and WebGate on any OAM supported OS and configure Reverse Proxy. WebGate does not need to be on the same server/machine or on same platform.

  • Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

           Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system?  I think it's probably something in the Windows
    8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard.  After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine.  My real question is, why should I have to settle
    for 32bit on a 64bit system?

    I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
    I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
    upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
    from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
    System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
    others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
    failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
    disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
    have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
    partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
    (Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
    (4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
    2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
    enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

  • Overclocking amd a8 5500 processor

    Hello I'm mark I was wondering if I could overclock my amd a8 5500 processor from stock 3.2 ghz to a higher same stability speed like 3.8 or 4.0 ghz is this safe to do so am I able to do this without upgrading my fan or cooling system. My room temperature usually stays around 74 degrees but may go down to 60 in winter. What ghz speed do u recommend overclocking to for an hp pavillion p7 1534 with amd a8 5500?

    Your HP p7-1534 Desktop Computer has no options in the BIOS for overclock and therefore doesn't support overclocking. Please see HP Desktop PCs - BIOS Settings for the Jasmine Motherboard for available BIOS settings.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Upgrading AMD VSeries V120 processor

    Hi,
    First I'm sorry that this message is kind of a repost since i've putted my first message in the wrond section and can't remove it. I have a Compaq Presario CQ62-200ca with a AMD V Series V120 processor and i would like to know if it is possible to upgrade the processor for a dual core.  Can the motherboard / cpu support it? Thank you!
    This question was solved.
    View Solution.

    Here is list of processors the notebook as tested with....This information is Service Manual as well http://h10032.www1.hp.com/ctg/Manual/c02129288.pdf
    But that said, this notebook is still under warranty...to do a processor upgrade on notebooks takes a lot of effort and ricky as well...
    AMD Phenom N930 Processor (2.0 GHz, 2MB total L2 cache, 1333 MHz) Quad core
    AMD Phenom II P920 Processor (1.6 GHz, 2MB total L2 cache, 1066 MHz) Quad Core
    AMD Phenom II P820 Processor (1.8 GHz, 1.5MB L2 cache, 1066 MHz, 3.6 GT/s) Triple Core
    AMD Phenom N830 Processor (2.1 GHz, 1.5MB total L2 cache, 1333 MHz)—Triple Core
    AMD Anthlon II P320 Processor (2.1 GHz, 1 MB L2 cache, 1066 MHz, 3.2 GT/s) Dual Core
    AMD Anthlon™ II N330 Processor (2.3 GHz, 1 MB L2 cache, 1066 MHz, 3.2 GT/s) Dual Core
    AMD Phenom N620 Processor (2.8 GHz, 2MB total L2 cache, 1333 MHz) Dual Core
    AMD Turion II P520 Processor (2.3 GHz, 2MB L2 cache, 1066 MHz, 3.6 GT/s) Dual Core
    AMD Turion™ II N530 Processor (2.5 GHz, 2MB L2 cache, 1066 MHz, 3.6 GT/s) Dual Core  
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • MSI K8T + AMD 64 Athlon Processor + Corsair 3200, can anybody please help?

    i recently have put together a system as follows...
    MSI K8T Neo Mainboard
    AMD 64 Athlon Processor
    Corsair TWINx1024-3200c2pt
    i experience random system crashes/reboots/lockups and sometimes on restart i get system message from windows xp saying that "this system has recovered from a serious error" and when i click to view the details of this error.. this is what follow..
    C:\WINDOWS\Minidump\Mini123103-03.dmp
    C:\DOCUME~1\robby\LOCALS~1\Temp\WER1.tmp.dir00\sysdata.xml
    **windowsusername
    i was wondering if anybody else has had any problems with this or perhaps if any of you know what could possibly be causing this.
    i have all the latest BIOS drviers, Motherboard drivers, and amd chipset drivers.
    can anybody help me with this?
    thank you.

    ok heres what i know i have corsair 3200 value select with the same system MSI K8T athlon 64 3200
    k just like 6 days ago i took out my motherboard and put in the rest of the motherboard risers the one by the ram had a plastic one in it and i put in all brass ones or whatever they are, and it started to bomb the  on me drivers not installing correctly and stuff like what you guys are saying so i just took them back out last night and im gonna reinstall windows again to see if it helps( i reinstalled windows XP pro 5 times yesterday by the way trying to make my Radeon 9800XT work properly with the drivers and have 8x and fast write enabled cause that was messing up also) and i finally got it to where i could install most the drivers but 2 of my hard drives are missing so thats why im reinstalling, windows wont allow me to install the driver in any way so it might be somthing with the risers on the board
    it was fine when it was missing the 3 on the end where the ide plugs are and i have my ram in slots 0 and 2 but that didnt seem to matter
    so thats just my experience to right now

  • Solaris 10 AMD Installer

    Hi,
    This may have been asked already but i searched the forums and couldnt see if it was or not.
    Anyway i was looking to deploy Weblogic on a Solaris 10 box but it is not Sparc it is an AMD processor.
    Can anyone tell me if there is such an installer? Or if there is a workaround for the Sparc installer.
    Regards,
    Diarmaid

    A similar question was asked in the below post,
    Re: Weblogc 10.3 64 bit
    But you can find what you are looking for at the following support page, there's what looks to be a basic/general installer:
    http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html#102349
    I'm trying to install 10.3 on Solaris 10 with an AMD64 now and I hit a Fatal Error when it tried to create the domain.
    Hope that helps.
    Edited by: user10882084 on Feb 18, 2009 8:19 AM

  • AMD Athlon 64 Processor compatibility

    Hi guys,
    Does Solaris 9 supports AMD Athlon 64-bit Processor?
    Thks

    Check out:
    http://www.sun.com/bigadmin/hcl/search.jsp
    You might be able get to the answer faster.
    Also check out
    http://www.sun.com/bigadmin/hcl/data/sol/
    To see if a system has already been submitted.
    have fun,
    Kevin

  • AMD Dual Core Processor - Problem between tracks

    I am running iTunes on a dual core AMD Athlon processor and notice strange behavior on the computer. When iTunes moves from one track to the next, it sounds like it is playing the end of the first track at the same time as the beginning of the second track. The same mp3 files play perfectly when downloaded to the iPod.
    My theory is that iTunes is using only one processor on each file (track) but can switch to the other processor for the next track. Since they are asynchronous, they end up overlapping during the transition.
    BTW - latest drivers, including the May '06 AMD driver are installed.

    There's no need to worry, it's just a neat little feature, not a hardware issue. Some people like it.
    In iTunes, go to the Playback prefereences (Edit>Preferences>Playback tab) and make sure "Crossfade Playback" is deselected.

  • Unexpected reboot during simulation using multisim on AMD dual core processor

    We are using NI-multisim 10 in a classroom environment and are experiencing sudden reboots during simulation without giving any error or warning. This happens on multiple machines, all being Dell Optiplex 740 with AMD DC 2Ghz as processor. Since these problems happen so frequently, making  teaching quite impossible, we have shifted PC-room and are now using older machines. On these machines - Dell GX280 using intell P4HT-2,8 Ghz - we experience no more problems.
    Is this reboot problem related to the article :  Unexpected Errors with DAQ Device on AMD Dual Core Machine  (http://digital.ni.com/public.nsf/allkb/9CE22FE099A​FB8BF862572FF007A5D45) and what do we have to do to fix this problem?

    Nic
    Can you verify your driver versions? Make sure that you are running the latest versions of NI drivers to ensure proper compatibility. If possible, you might try upgrading to multisim 11. If this does not solve the issue, try the single processor workaround in outlined in the following KB:
    http://digital.ni.com/public.nsf/allkb/D0FC3BE7D9F​331398625731A005D76B8?OpenDocument
    Altough it is surely decreasing the performance of the system, certain cases have shown that there is no other possible workaround unfortunately.
    Best Regards
    Michiel
    Applications Engineer
    NI Belgium
    http://www.ni.com/ask

  • Toshiba Sattelitte L550D, AMD dual core processor M520, Firefox 3.6 works fine; any later version produces only server not fond for any URL; any one have a fix?

    Forgot to mention op system is Windows 7 64 bit; 4 gig memory and a 320 gig 5400 rpm (slow) SATA drive. Have tried Pale Moon with the same result although its site shows the AMD Turion II dual core processor as supported

    Yes, the question was poster from my desktop machine which is set to dual boot both windows 7 and Xp. I regularly run spybot scans but I'll try all the others you mentioned.
    Thanks

Maybe you are looking for