Solaris Pakage Manager

Hello folks,
I just have migrated from Linux to Solaris Express Developer Edition. And I need to see which packages I have installed.
On any Linux you will find Administrative Console( Like Yast on Suse or linuxconf in RH)
But I couldn't find anything on Solaris.
Basically i need [HEX EDITOR].
If anyone could help me with that.
Thanks in advance,
Iskandaraka

pkginfo

Similar Messages

How do you change volume permissions with Solaris Volume Manager?

(Previously posted in "Talk to the Sysop" - no replies)
I'm trying to set up Solaris 9 to run Oracle on raw partitions. I have my design nailed down and I have built all the raw partitions I need as soft partitions on top of RAID 1 volumes. All this is built using Solaris Volume Manager (SVM).
However, all the partitions are still owned by root. Before I can create my Oracle database, I need to change the owner of the Oracle partitions to oracle:oinstall. The only reference I found telling me how to do this was in a Sun Blueprint and it essentially said "You can't change volume permissions directly or permanently using SVM and chown will only remain effective until the next reboot. To make the changes permanent, you must modify /etc/minor_perm". Unfortunately, I can't find an example of how to do this anywhere and the online man pages are not particularly helpful (at least not to me).
I'd appreciate a quick pointer, either to a good online resource or, even better, a simple example. For background, the volumes Oracle needs to own are:
/dev/md/rdsk/d101-109
/dev/md/rdsk/d201-203
/dev/md/rdsk/d301-303
/dev/md/rdsk/d401-403
/dev/md/rdsk/d501-505
I provide this information because I'd like to assign some, but not all, of the devices under /dev/md/rdsk to the oracle user and I was hoping some smart person out there could illustrate an approach using simle regular expressions, at which I'm horribly poor.
Thanks in advance,
Adrian

Ron, I feel your pain. I just came from an HTC also and a lot of stuff with this iPhone is bugging the crap out of me. Who makes a phone where you can't adjust the ringer and alert volumes independently? Instead, I have to adjust the alert volume when it is active. C'mon guys. Get with the program. You won a bunch of Android users over with the 4S, but you're going to chase us all back when we're done with our contract. Frustrating.

How Solaris Volume Manager sync submirrors

HI Gurus,
I have a question on how Solaris volume manager (SVM) does re-synchronization (in raid 1). In another word, in case of one submirror was modified during boot process, how SVM detects it and how SVM validate which sumirror is gold.
One scenario I ran into: We had a software installed, this software updated /etc/name_to_sysnum which conflicts with new Solaris 10 release. So the system could not boot any more (not even to single user mode) after software installed. This box had root disk mirrored. To fix this, we boot from CDROM and mounted 1st mirror drive root partition (c0t0d0s0) and remove the bad entry in /etc/system (we did not break the mirror to make the changes). Then the box was able to boot up. After server was up, it was found /etc/system was rolled back with bad entries. Apparently it was synced back from 2nd mirror. So now the question is how SVM decides which submirror is invalid and should be re-sync from good submirror?
2nd scenario I saw: someone accidently added one root file system submirror into zone as a file system. But during zone installation, system got panic and rebooted. During reboot, system kept crashing. We managed to boot from network, break the mirror (update /etc/vfstab and /etc/system) and finally was able to boot the system. So in case one submirror was accidently accessed, how does SVM protect data and will the corrupted data written to disk slice synced to good submirror?
Please share your thoughts and point me with some good references. I could not find related info in SVM doc.
Thanks,
Wei

SVM doesnt "sync" disks ie copy data from one disk to another except in the case when your first setting up a mirror. Or your replacing a disk etc.
Those are circumstances when it realises the disks are out of sync.
Once it has a mirrored pair, it will keep them in sync since all writes will go to both sides.
And reads take alternate blocks from both disks.
So if the the two sides of a mirror have gotten out of sync, you will see strange results as half your content will come from one and half your content will come from the other. Even inside a single file, assuming the file is bigger than the stripe size.
So anything writing to one side of the mirror outside of SVM's control will corrupt things. And SVM has no mechanisms for detecting this and "fixing" things up.
So its vital to break the mirror if your going to be writing to the disk outside of SVM control.
If your brave and the amount of changes is small, you can try to edit both sides of the mirror.
But you have to remember that SVM works at the block level, not the filesystem level.
So if you do anything to make the two sides even minorly different. Even something as miror as update 2 files in a different order.
Then the layout of blocks on the disks in the 2 halves could be different. And your're screwed.
So don't do it on any system you care about. Its really easy to make a mistake and the consequences are usually catastrophic.
When in doubt break the mirrors. Its the only safe way.

Solaris Volume Manager Enhanced Storage BUG?

All of our 64 bi sparc machines from solaris 8 and up used the Solstise Disk Suite...now solaris volume manager. The default solaris 10 install installs the command line metadb and other tools. I did formerly enjoy the metatool command for configuring the disk with GUI. I start the Management Console then I select Enhanced Storage and the Management Console just hangs. Is this because something is missing from my path. Or do I need to install more packages? If so what are these packages and where can I get them. I am also looking for the old versions of metatool for solaris 8 and 9 and ideas where I could find these?

All of our 64 bi sparc machines from solaris 8 and up used the Solstise Disk Suite...now solaris volume manager. The default solaris 10 install installs the command line metadb and other tools. I did formerly enjoy the metatool command for configuring the disk with GUI. I start the Management Console then I select Enhanced Storage and the Management Console just hangs. Is this because something is missing from my path. Or do I need to install more packages? If so what are these packages and where can I get them. I am also looking for the old versions of metatool for solaris 8 and 9 and ideas where I could find these?

Solaris Volume Manager API

Do they provide an API for commands like growfs, metaxxxx?

Try a download for Solaris Volume Manager guide in the pdf format from docs.sun.com .
Sridhar

Solaris Volume manager

Hi,
Hi,
We are in process of developing a backup utility (CLI) using the Raid manager (Firmware operating at device level).
Requirement
When the user gives a mount point for backup
-     Get the disk information that is mounted at the given mount point, if the mount point is for a metadevice then get all the disks under that metadevice.
-     Execute the Raid manager command for disk level copying for the disks that are mounted (Primary disk) to the other disk (secondary disk), which also can be under a metadevice.
-     Assign a backup ID, used for restoring the same when user wants
Problem
When a disk level copy operation is performed from a primary volume to a secondary volume which are configured by SVM, is there any way in which it is possible to configure the secondary (which now has the same data of primary) under SVM without any loss of data?

A new feature of Solaris Volume Manager will provide the ability to import DiskSets. It should be available in a latter update release of Solaris 9.

Solaris Volume Manager packages installation fails

During the OS installation phase while jumpstarting, the output is as follows for Solaris Volume Manager (see below).
To begin with, why are SUNWmdr and SUNWmdu packages trying to install? They are not mentioned in my Profile file, neither are they included in CORE OS. Is this a bug and has anyone found a fix to it?
/tmp/install2gaGwn/checkinstall4gaGwn: /tmp/sh68390: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdr> failed.
No changes were made to the system.
/tmp/installHBaqyn/checkinstallJBaqyn: /tmp/sh68530: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdu> failed.
No changes were made to the system.
3751 blocks
Thanks in advance,
David
p.s. This is happening while installing Sol9 sparc 04/2004 version (CORE) on Blade100, V480 and V240 machines.

<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>grestep wrote on Fri, 24 September 2004 14:34</b></td></tr><tr><td class="quote">
Unfortunately, this is a bug in the Sun jumpstart process.
You will have to install the same packages in a postinstall phase.
This bug has been there for years.
It is fixed in the latest Solaris 9 cdroms dated 09/04.
I know of no other fix except the latest cdroms.
It is also fixed in Solaris 10.
Solaris 8 even the most recent cdroms have the bug.
This bug only appears in a jumpstart. It works fine in a cdrom install. I haven't investigated why the jumpstart from a jumpstart server fails, but installing the package in a postinstall phase works.
I recommend that you download the latest Solaris 9 cdroms if it is Solaris 9 that is having the problem. For Solaris 8, postinstall phase is your only option.
I don't remember this bug in Solaris 7.
</td></tr></table>
Any idea how to fix this ? Ive jumped a lot of machines using this jumpstart server using JET, always using the SDS product from JET, it always worked well, until I tried to jump this v210 recently acquired and firmware updated.
I got those errors and have no clue how to fix this .. :
SDS: Installing sds....
SDS: Installing SUNWmdr from: /a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc
Copyright 2000 Sun Microsystems, Inc. All rights reserved.
/a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc/SUNWmdr/inst all/checkinstall: /t
mp/sh39790: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdr> failed.
No changes were made to the system.
SDS: SUNWmdr installation complete
SDS: Installing SUNWmdu from: /a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc
Copyright 2000 Sun Microsystems, Inc. All rights reserved.
/a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc/SUNWmdu/inst all/checkinstall: /t
mp/sh40210: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdu> failed.
No changes were made to the system.
SDS: SUNWmdu installation complete
SDS: Installing SUNWmdx from: /a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc
Copyright 2000 Sun Microsystems, Inc. All rights reserved.
/a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc/SUNWmdx/inst all/checkinstall: /t
mp/sh40640: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdx> failed.
No changes were made to the system.
SDS: SUNWmdx installation complete
SDS: Installing SUNWmdnr from: /a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc
Copyright 2000 Sun Microsystems, Inc. All rights reserved.
/a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc/SUNWmdnr/ins tall/checkinstall: /
tmp/sh41060: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdnr> failed.
No changes were made to the system.
SDS: SUNWmdnr installation complete
SDS: Installing SUNWmdnu from: /a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc
Copyright 2000 Sun Microsystems, Inc. All rights reserved.
/a/var/opt/sun/jet/js_media/pkg/sds/4.2.1/sparc/SUNWmdnu/ins tall/checkinstall: /
tmp/sh41460: cannot create
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <SUNWmdnu> failed.
No changes were made to the system.
SDS: SUNWmdnu installation complete
SDS: Apply patch 108693-25
Using : SunOS Release 5.8 Version Generic_117350-16 64-bit
All other packages installed without problem
Any insights ?

Solaris Volume Manager help needed...

I am new to Solaris Volume Manager and need some assistance. I suspect that the mirroring was no setup correctly on a server I am concerned with. Here is some output:
metadb -i
flags first blk block count
a m p luo 16 8192 /dev/dsk/c1t0d0s7
a p luo 8208 8192 /dev/dsk/c1t0d0s7
================================================
metastat
d4: Mirror
Submirror 0: d50
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 5905116 blocks (2.8 GB)
d50: Submirror of d4
State: Okay
Size: 5905116 blocks (2.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s5 0 No Okay Yes
d3: Mirror
Submirror 0: d40
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 6292242 blocks (3.0 GB)
d40: Submirror of d3
State: Okay
Size: 6292242 blocks (3.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s4 0 No Okay Yes
d2: Mirror
Submirror 0: d30
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks (4.0 GB)
d30: Submirror of d2
State: Okay
Size: 8389656 blocks (4.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Okay Yes
d1: Mirror
Submirror 0: d20
State: Okay
Pass: 0
Read option: roundrobin (default)
Write option: parallel (default)
Size: 33555735 blocks (16 GB)
d20: Submirror of d1
State: Okay
Size: 33555735 blocks (16 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s1 0 No Okay Yes
d0: Mirror
Submirror 0: d10
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16779312 blocks (8.0 GB)
d10: Submirror of d0
State: Okay
Size: 16779312 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t0d0 Yes id1,ssd@n20000004cf6f7b96
=============================================
metastat -p
d4 -m d50 1
d50 1 1 c1t0d0s5
d3 -m d40 1
d40 1 1 c1t0d0s4
d2 -m d30 1
d30 1 1 c1t0d0s3
d1 -m d20 0
d20 1 1 c1t0d0s1
d0 -m d10 1
d10 1 1 c1t0d0s0
========================================
format of c1t0d0 (rootdisk)
Part Tag Flag Cylinders Size Blocks
0 root wm 11615 - 17422 8.00GB (5808/0/0) 16779312
1 swap wu 0 - 11614 16.00GB (11615/0/0) 33555735
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 home wm 17423 - 20326 4.00GB (2904/0/0) 8389656
4 unassigned wm 20327 - 22504 3.00GB (2178/0/0) 6292242
5 var wm 22505 - 24548 2.82GB (2044/0/0) 5905116
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 24549 - 24619 100.16MB (71/0/0) 205119
=======================================================
format of c1t1d0 (rootmirror)
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 14519 20.00GB (14519/0/0) 41945391
1 swap wu 14520 - 17423 4.00GB (2904/0/0) 8389656
2 backup wu 0 - 24619 33.92GB (24620/0/0) 71127180
3 - wu 0 - 0 1.41MB (1/0/0) 2889
4 - wu 1 - 24619 33.91GB (24619/0/0) 71124291
5 unassigned wm 0 0 (0/0/0) 0
6 var wm 17424 - 23231 8.00GB (5808/0/0) 16779312
7 unassigned wm 0 0 (0/0/0) 0
Any help and/or links to information for proper setup of mirroring when using Solaris Volume Manager would be appreciated. I should mention that the system also uses Veritas Volume Manager 4.1, but only Solaris Volume Manager is in control of the mirroring.

Duplicate slicing: prtvtoc /dev/rdsk/c1t0d0s7|fmthard -s - /dev/rdsk/c1t1d0s7
Lather, rinse, repeat for each file system:
metainit the bootable side of the mirror: metainit -f d71 1 1 c1t0d0s7.
metainit the other side: metainit d72 1 1 c1t1d0s7.
Attach one side of the mirror: metainit d70 -m d71
When done: lockfs -fa;init 6
Lather, rinse, repeat for each file system:
After reboot attach the other side of the mirror: metattach d70 d72
bash-3.00# metastat -p
d70 -m d71 d72 1
d71 1 1 c1t0d0s7
d72 1 1 c1t1d0s7
d50 -m d51 d52 1
d51 1 1 c1t0d0s5
d52 1 1 c1t1d0s5
d10 -m d11 d12 1
d11 1 1 c1t0d0s1
d12 1 1 c1t1d0s1
d0 -m d1 d2 1
d1 1 1 c1t0d0s0
d2 1 1 c1t1d0s0
d60 -m d61 d62 1
d61 1 1 c1t0d0s6
d62 1 1 c1t1d0s6
bash-3.00# cat /etc/vfstab
#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d10 -       -       swap    -       no      -
/dev/md/dsk/d0 /dev/md/rdsk/d0 /       ufs     1       no      -
/dev/md/dsk/d70 /dev/md/rdsk/d70        /usr    ufs     1       no      -
/dev/md/dsk/d50 /dev/md/rdsk/d50        /var    ufs     1       no      -
/dev/md/dsk/d60 /dev/md/rdsk/d60        /opt    ufs     2       yes     -
/devices        -       /devices        devfs   -       no      -
ctfs    -       /system/contract        ctfs    -       no      -
objfs   -       /system/object objfs   -       no      -
swap    -       /tmp    tmpfs   -       yes     -

Solaris volume manager -- where?

Where is the solaris volume manger for solaris 10 located?
On what disk?
Can I download it?

$ pkginfo | grep -i volume
system SUNWdthev CDE HELP VOLUMES
system SUNWdthez Desktop Power Pack Help Volumes
system SUNWmdar Solaris Volume Manager Assistant (Root)
system SUNWmdau Solaris Volume Manager Assistant (Usr)
system SUNWmdr Solaris Volume Manager, (Root)
system SUNWmdu Solaris Volume Manager, (Usr)
system SUNWvolr Volume Management, (Root)
system SUNWvolu Volume Management, (Usr)
$
bbr

Solaris Patch Manager gets status:302 behind Proxy

Hi Colleagues,
I am trying to get Solaris Patch Manager on my Solaris 8 up and running.
But if I say "smpatch analyze", the smpatch just reports a "Response code was 302" I think this means something like: "temporary moved".
I think my problem is, that the proxy doesn't follow the moved object.
Can anybody tell me where I can manualy download the detectors.jar and patchdb.zip?

Any news on this posting? I'm trying to do the same thing, as I dont want to use a caching proxy to download patches, I just want to use
a local source to perform analysis, downloads, and updates.
Cheers.

Luactivate error message re: Solaris Volume Manager

Is this something I need to be concerned about?
2009-04-02 16:40:18 # luactivate sol10_1008_stage2
ERROR: Solaris Volume Manager, (Root) file missing: </dev/md>.
ERROR: Solaris Volume Manager, (Root) file missing: </dev/md>.
Activating the current boot environment <sol10_1008_stage2> for next reboot.
The current boot environment <sol10_1008_stage2> has been activated for the next reboot.
2009-04-02 16:40:25 #Thanks,
Mark

Is this something I need to be concerned about?
2009-04-02 16:40:18 # luactivate sol10_1008_stage2
ERROR: Solaris Volume Manager, (Root) file missing: </dev/md>.
ERROR: Solaris Volume Manager, (Root) file missing: </dev/md>.
Activating the current boot environment <sol10_1008_stage2> for next reboot.
The current boot environment <sol10_1008_stage2> has been activated for the next reboot.
2009-04-02 16:40:25 #Thanks,
Mark

Solaris volume manager and RPC

I'm trying to run as few services as possible? Does anybody know if there are dependencies between Solaris Volume Manager (formerly DiskSuite) and rpc? I know that Solaris Volume Manager uses something called rpc.metamhd, but I'm not sure if this requires the full blown rpc.
thanks...

Duplicate slicing: prtvtoc /dev/rdsk/c1t0d0s7|fmthard -s - /dev/rdsk/c1t1d0s7
Lather, rinse, repeat for each file system:
metainit the bootable side of the mirror: metainit -f d71 1 1 c1t0d0s7.
metainit the other side: metainit d72 1 1 c1t1d0s7.
Attach one side of the mirror: metainit d70 -m d71
When done: lockfs -fa;init 6
Lather, rinse, repeat for each file system:
After reboot attach the other side of the mirror: metattach d70 d72
bash-3.00# metastat -p
d70 -m d71 d72 1
d71 1 1 c1t0d0s7
d72 1 1 c1t1d0s7
d50 -m d51 d52 1
d51 1 1 c1t0d0s5
d52 1 1 c1t1d0s5
d10 -m d11 d12 1
d11 1 1 c1t0d0s1
d12 1 1 c1t1d0s1
d0 -m d1 d2 1
d1 1 1 c1t0d0s0
d2 1 1 c1t1d0s0
d60 -m d61 d62 1
d61 1 1 c1t0d0s6
d62 1 1 c1t1d0s6
bash-3.00# cat /etc/vfstab
#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d10 -       -       swap    -       no      -
/dev/md/dsk/d0 /dev/md/rdsk/d0 /       ufs     1       no      -
/dev/md/dsk/d70 /dev/md/rdsk/d70        /usr    ufs     1       no      -
/dev/md/dsk/d50 /dev/md/rdsk/d50        /var    ufs     1       no      -
/dev/md/dsk/d60 /dev/md/rdsk/d60        /opt    ufs     2       yes     -
/devices        -       /devices        devfs   -       no      -
ctfs    -       /system/contract        ctfs    -       no      -
objfs   -       /system/object objfs   -       no      -
swap    -       /tmp    tmpfs   -       yes     -

Monitoring services in zones with Solaris container Manager

I need to know how to Manage Solaris services (SMF) in sparse zone with Solaris container manager.
I have navigated all the documentation and I have not found any clue.
I installed the Sun management center (SMC) server on a server box and the agents on others. I can manage the SMF of the global zone by drilling down via the console GUI. But having access to the container manager, I have to go via https connection. And drilling down on the zone did not reveal that SMF can be monitored.
Please if you have any idea, share it with me.

Hi,
check these:
- Version of webserver latest is 3.1
# smcwebserver -V
- check webconsole is started and running
# smcwebserver status
Sun Java(TM) Web Console is running
# svcs webconsole
STATE STIME FMRI
online 19:38:06 svc:/system/webconsole:console
# svcs -pl webconsole
fmri svc:/system/webconsole:console
name java web console
enabled true
state online
next_state none
state_time Wed Feb 10 19:38:06 2010
logfile /var/svc/log/system-webconsole:console.log
restarter svc:/system/svc/restarter:default
contract_id 64
dependency require_all/none svc:/milestone/network (online)
dependency require_all/refresh svc:/milestone/name-services (online)
dependency require_all/none svc:/system/filesystem/local (online)
dependency optional_all/none svc:/system/filesystem/autofs (online) svc:/network/nfs/client (online)
dependency require_all/none svc:/system/system-log (online)
process 843 /usr/java/bin/java -server -Xmx128m -XX:+UseParallelGC -XX:ParallelGCThreads=4
- check port 6789 is listen mode
# netstat -an | grep 6789
*.6789 *.* 0 0 49152 0 LISTEN
if the output show
localhost .6789 *.* 0 0 49152 0 LISTEN
than do these:
- check that the tcp_listen of webconsole service is true, default is false
# svccfg -s webconsole listprop options/tcp_listen
options/tcp_listen boolean false
# svcadm disable svc:/system/webconsole:console
# svccfg -s webconsole setprop options/tcp_listen=true
# svccfg -s webconsole listprop options/tcp_listen
options/tcp_listen boolean true
# svcadm enable svc:/system/webconsole:console
Regards

Port 135 and 25913 and how to run Solaris Container Manager?

What are these ports 135 and 25913 and how to I run Solaris Container Manager .
thanks

Hi Zeealee,
zeealee wrote:
What are these ports 135 and 25913 and how to I run Solaris Container Manager .I haven't heard of those ports being used with SunMC before, sorry (but maybe my memory is just bad). The features of Solaris Container Manager (SCM) have now almost been entirely superseded by [Oracle Enterprise Manager Ops Center|http://www.oracle.com/us/products/enterprise-manager/opscenter/index.html] (forum here), but if you're still looking to try SCM, the manual can be found here, and if you said "yes" to SCM when you installed your SunMC Server, then you should see it in your SunMC web interface:
https://<sunmc_server>:6789 --> SunMC 4.0 --> Manage Solaris Container
If you'd like a demo of how you perform Container/LDOM operations in Ops Center, let me know and I'll set it up.
Regards,
[email protected]

Solaris Bandwidth Manager

Hi every one.
I just Installed the Solaris OS 5.10 10/08 on a new Dell Vostro 200. I downloaded the Solaris Bandwidth Manager Documentations but can't find the software itself in solaris.
Does the software come bundled in solaris 10 or does one get it separate?

I have moved this question to the Network Configuration Forum here [http://forums.sun.com/thread.jspa?threadID=5354258|http://forums.sun.com/thread.jspa?threadID=5354258]. Please follow the link.
Sorry for any inconveniences.
Regards
Nyantos.

Solaris Pakage Manager

Similar Messages

Maybe you are looking for