Solaris Remote Desktop Question...

Hello;
I have a quick ? for all you Solaris gods! :-)..
Is there a software package that will allow me to see a session of someone logged on!? For instance...
Windows Desktop, TeamViewer, etc., are packages that will interact with the currently logged on user & both people see the same thing, etc.
I have checked NXServer and VNC, and it doesn't seem that either of them do this, but rather use "individual" sessions so to speak!?
An I correct!? Or have I just setup the configuration files wrong!?
Thank you for the help in advance! This is important!

VNC can do this as long as both users are connected to the same session. VNC doesn't let you drop in on a session started outside of VNC.
I'm less familiar with NX, but I thought it was the same.
Darren

Similar Messages

Solaris remote desktop from Windows

Hi all i have windows xp and solaris 10 on the other machine...(home lan)
I want to make visual remote desktop connection to my solaris system...
do you know any effective tool for this?
thank you

Lion-OSeveral reasons where one of them being personal
taste ;-)
Next is versatility. Its pretty easy to setup an X
server, even in Windows these days, and as such you
hardly have to change anything on the Solaris part to
make this setup work. Which can be easier on your
part when it comes to patches and other updates.Thanks.
I had tried, not very hard, last week to setup X forwarding via SSH but couldn't find a free Windows X client to make it work. Cygwin is installed but perhaps I haven't fooled with it enough to find the way to make it happed. I'm sure my good buddy Google is knowledgeable on the subject once I know what questions to ask. ;)
My personal taste is for simple and secure and I'll likely follow your advice.
Thanks again!

CM12 Agent Remote Desktop Question

Hello,
does anyone know why MS started the CM12 Agent Remote Desktop delayed?
I am searching for a documentation where i can read about it. in CM07 was the service not delayed but in CM12 since SP1.
Thanks a lot
greetz
André

You will not find answers to 'why' questions in any documentation ;-) The only answer that comes close is: "because Microsoft decided to design it that way". You can change the startup type by using a GPO though.
Torsten Meringer | http://www.mssccmfaq.de

General remote desktop question

If i set up remote desktop will i be able to use the apps on the remote computer?
Basically what i want to be able to to is use my laptop to access my main shop computer to use quickbooks while i am on the road. I want to be able to invoice and print out the invoices on the office computer and printer.
will remote desktop work for this?

Yes, it would. But if all you need is to be able to control another computer, then ARD would be overkill. Look into the freeware VNC. That will give you control capabilities and not cost you anything. You can find VNC applications for Mac here. Most people seem to find Chicken of the VNC works well for them.

Solaris Remote Desktop Login to Red Hat 5 Server

We have a number of Sun boxes running Solaris 8 and 9 and we need them to login to a Server running Red Hat 5. Have edited the /etc/hosts file to include the Red Hat hostname and ip address and when I enter the hostname it acts as if it is connecting to it, but then the cursor turns into a watch face and then kicks back to the login screen. Am I missing something minor or major??? Should also state that I can connect no problem to the server using hummingbird from PCs...

We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?
I've seen this on a few systems here when the agent has been upgraded but the old agent process does not die off. Just to rule it out, pick a node, make sure there are no instances of scxcimserver or scxcimprovagt and then start the agent and
see if the issue goes away. I've also seen wsman authentication failures related to the libssl issue that was fixed in yesterday's release.

Remote Desktop Question

Hi All,
I get the funny feeling at my work that the IT guy can log on and view my screen. I have heard they use a program called 'Chicken of the VNC' Does anyone know if i can tell if i am being wathced as I don't bloody like it.
I have turned off sharing etc in my firewall but is it still possible to get access to my machine to view. Are there any services etc i can look at to see if they are running which may give me a guide.
Many thanks

Hi, thanks for the response. I don't have ARD in my sytem prefernces. Also checked login items and nothing there and checked processes and nothing running showing VNC or anything.
Maybe I am just being paranoid, I was just curious if there were secret ways to get access etc.
Thanks for the help

Remote Desktop Connection Expert Question...

I am looking for someone with a lot of experience with Windows Remote Desktop Connection to answer a basic question or two...
I have a WireShark capture (only one side unfortunately) which shows 880 MBytes sent from the client running the Remote Desktop Connection, to the host; but I have no WireShark capture of the packet volume coming from the host to the client IP address. The
capture is for a period spanning 32 hours. I am being asked to try and determine (guestimate) the amount of data that might have been sent from the host to the client... I know this is a real out there question; which is why I'm looking for someone with
real Remote Desktop Connection experience.
Given that if the volume of traffic from the client to the host is 880MBytes over 32 hours; is there any way at all of guessing how much might have been sent from the host to the client?
Please be kind, this is important and I am presenting all of the information I have.
Thank you!

Hi,
Agreed with T.Murr here. Only based on the networks traces from one way connection, is hard to determine what happens on the other side.
Besides, hope the following information would be helpful here:
Top 10 RDP Protocol Misconceptions – Part 1
Best regards
Michael Shao
TechNet Community Support

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

REMOTE DESKTOP CONNECTION (Questions For Experts)

Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
Q2) Is it possible to use hardware like printer while in remote connection with a tab or lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you .

A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
A2- To redirect devices and resources
Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
Click Options, and then click the Local
Resources tab.
Under Local devices and resources, select the devices or resources you want to redirect.
To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
supported Plug and Play (PnP) devices.
The Plug and Play devices that support redirection and are currently plugged in appear in this list.
To redirect supported USB devices, under Local devices and resources, double-click Other
supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
Select the check box next to each device that you want to redirect.
To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
resources, double-click Drives, and then click Drives
that I plug in later.
– or –
Double-click Other supported Plug and Play (PnP) devices, and then click Devices
that I plug in later.
A3 - not possible to mountDVD drive on remote desktop.
Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

Questions in regards to server 2012R2 Remote desktop Service deployment and GPO

Hi Everyone
We have a business requirement moving to 2012R2 RDSH server. I have installed a 2012R2 member servers and enabled Remote desktop licensing role. I have activated the licenses. the servers is in operational
I have deployed 3 windows 2012R2 member server "RDS1" , "RDS2" and "RDS3".
on RDS1 I ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
On RDS1 Server Manage Dashboard Page Select Remote Desktop Services > Overview. Under RD Licensing I added my 2012R2 license server "2012r2-tslic". Go to task. Edit deployment properties RD license mode to per device and click OK.
Reboot RDS1
Check RD Licensing Diagnoser everything is clear
On RDS2 I did the exact same thing ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
But With RDS2 I move this server to an OU that link to a GPO with RD licensing details. after reboot the servers check RD Licensing Diagnoser I can see 2012r2-tslic specified as the license servers.
Based on this document
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx Are you suppose to configure RD license server via Remote desktop Service deployment ? Not GPO ?
Here are my questions
We currently have ten 2008r2 terminal servers in a NLB cluster. each RDSH server have in house application installed on each one of them. User connect to the 2008R2 RDSH servers via RDP connection. we have a restricted GPO apply to those
RDSH servers. user cannot do anything on RDSH servers apart from running the application and use excel. On the remote desktop session host configuration we have enable settings like end a disconnected session , Active session limit ,
remote control users session , LPT port redirection.
We push out RD license server detail via GPO to the terminal servers
Can I use our existing GPO apply the licensing server settings , desktop restriction setting to the 2012R2 RDHS servers or we should be using Remote desktop Service deployment to do the job ? If that is the case how would you transfer the
current 2008r2 environment to 2012 using Remote desktop Service deployment. is that mean I have to manually configure 1 by 1.
Please help
Many thanks

Hi,
Please see my response to you in the other thread. Please contact me via email and I will go over the basic planning and deployment steps with you which will help clear things up and get you started off on the right foot.
You should only run through the wizard and create a RDS deployment once. Then you add the various servers (RDSH, RD Licensing, RD Gateway, etc), set Deployment properties, etc.
Thanks.
-TP

Solaris 11 - after installation there is no remote desktop avaliable

Hi All,
I have the problem that after installation of Solaris Express on SPARC machine there is no available remote desktop. I am using Xmanager to connect to my server.
It works fine with Solaris 9 and 10.
Do you know what is the problem?
Thanks,
Daniel

I was installing Solaris Exrepss using JumpStart server running on Solaris 10. Solaris Express installed successfuly.
But there was no XServer running.
So I was enabling some services.
During the enabling services error message appers:
Jun 8 18:44:33 sun1 gdm[295]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:39 sun1 gdm[390]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[541]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[294]: Failed to start X server several times in a short time period; disabling display :0
bash-3.00# svcs -a
STATE STIME FMRI
legacy_run 18:44:24 lrc:/etc/rcS_d/S29wrsmcfg
legacy_run 18:44:31 lrc:/etc/rc2_d/S10lu
legacy_run 18:44:31 lrc:/etc/rc2_d/S20sysetup
legacy_run 18:44:31 lrc:/etc/rc2_d/S40llc2
legacy_run 18:44:32 lrc:/etc/rc2_d/S42ncakmod
legacy_run 18:44:32 lrc:/etc/rc2_d/S47pppd
legacy_run 18:44:32 lrc:/etc/rc2_d/S70uucp
legacy_run 18:44:32 lrc:/etc/rc2_d/S72autoinstall
legacy_run 18:44:32 lrc:/etc/rc2_d/S73cachefs_daemon
legacy_run 18:44:33 lrc:/etc/rc2_d/S81dodatadm_udaplt
legacy_run 18:44:33 lrc:/etc/rc2_d/S89PRESERVE
legacy_run 18:44:33 lrc:/etc/rc2_d/S91afbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91gfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91ifbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91jfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91kfbinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S91zuluinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S94ncalogd
legacy_run 18:44:35 lrc:/etc/rc2_d/S98deallocate
legacy_run 18:44:40 lrc:/etc/rc3_d/S16boot_server
legacy_run 18:44:40 lrc:/etc/rc3_d/S50apache
legacy_run 18:44:41 lrc:/etc/rc3_d/S52imq
legacy_run 18:44:41 lrc:/etc/rc3_d/S80mipagent
legacy_run 18:44:41 lrc:/etc/rc3_d/S84appserv
disabled 18:43:48 svc:/platform/sun4u/mpxio-upgrade:default
disabled 18:43:48 svc:/system/metainit:default
disabled 18:43:48 svc:/network/iscsi_initiator:default
disabled 18:43:48 svc:/network/ipfilter:default
disabled 18:43:48 svc:/network/rpc/keyserv:default
disabled 18:43:48 svc:/network/rpc/nisplus:default
disabled 18:43:48 svc:/network/nis/server:default
disabled 18:43:48 svc:/network/nis/client:default
disabled 18:43:48 svc:/network/dns/client:default
disabled 18:43:48 svc:/network/ldap/client:default
disabled 18:43:48 svc:/network/nfs/status:default
disabled 18:43:48 svc:/network/nfs/nlockmgr:default
disabled 18:43:48 svc:/network/nfs/cbd:default
disabled 18:43:48 svc:/network/nfs/mapid:default
disabled 18:43:48 svc:/network/inetd-upgrade:default
disabled 18:43:49 svc:/network/nfs/client:default
disabled 18:43:49 svc:/application/print/server:default
disabled 18:43:49 svc:/network/ntp:default
disabled 18:43:49 svc:/platform/sun4u/sf880drd:default
disabled 18:43:49 svc:/system/auditd:default
disabled 18:43:49 svc:/system/mdmonitor:default
disabled 18:43:49 svc:/system/metasync:default
disabled 18:43:49 svc:/system/rcap:default
disabled 18:43:49 svc:/network/rarp:default
disabled 18:43:49 svc:/network/dhcp-server:default
disabled 18:43:49 svc:/network/nfs/server:default
disabled 18:43:49 svc:/network/rpc/bootparams:default
disabled 18:43:49 svc:/network/samba:default
disabled 18:43:49 svc:/application/management/seaport:default
disabled 18:43:49 svc:/application/management/snmpdx:default
disabled 18:43:49 svc:/application/management/sma:default
disabled 18:43:49 svc:/application/management/webmin:default
disabled 18:43:50 svc:/application/print/ipp-listener:default
disabled 18:43:50 svc:/network/dns/server:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv6
disabled 18:43:50 svc:/network/routing/ndp:default
disabled 18:43:50 svc:/network/routing/rdisc:default
disabled 18:43:50 svc:/network/ipv6-forwarding:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv4
disabled 18:43:50 svc:/network/routing/ripng:default
disabled 18:43:50 svc:/network/routing/route:default
disabled 18:43:50 svc:/network/security/krb5kdc:default
disabled 18:43:50 svc:/network/ipv4-forwarding:default
disabled 18:43:50 svc:/network/security/kadmin:default
disabled 18:43:51 svc:/network/security/krb5_prop:default
disabled 18:43:51 svc:/network/nis/passwd:default
disabled 18:43:51 svc:/network/nis/update:default
disabled 18:43:51 svc:/network/nis/xfr:default
disabled 18:43:51 svc:/network/http:apache2
disabled 18:43:51 svc:/network/apocd/udp:default
disabled 18:43:51 svc:/network/slp:default
disabled 18:43:51 svc:/platform/sun4u/sckmd:default
disabled 18:43:51 svc:/platform/sun4u/dscp:default
disabled 18:43:51 svc:/platform/sun4u/dcs:default
disabled 18:43:51 svc:/platform/sun4u/oplhpd:default
disabled 18:43:51 svc:/platform/sun4u/efdaemon:default
disabled 18:43:51 svc:/platform/sun4v/efdaemon:default
disabled 18:43:51 svc:/system/consadm:default
disabled 18:43:51 svc:/system/pools:default
disabled 18:43:51 svc:/system/pools/dynamic:default
disabled 18:43:51 svc:/system/iscsitgt:default
disabled 18:43:51 svc:/system/cvc:default
disabled 18:43:51 svc:/system/sar:default
disabled 18:44:38 svc:/network/swat:default
disabled 18:44:38 svc:/network/nfs/rquota:default
disabled 18:44:38 svc:/network/tname:default
disabled 18:44:38 svc:/network/telnet:default
disabled 18:44:38 svc:/network/uucp:default
disabled 18:44:38 svc:/network/chargen:dgram
disabled 18:44:38 svc:/network/chargen:stream
disabled 18:44:38 svc:/network/daytime:dgram
disabled 18:44:38 svc:/network/daytime:stream
disabled 18:44:38 svc:/network/discard:dgram
disabled 18:44:38 svc:/network/discard:stream
disabled 18:44:38 svc:/network/echo:dgram
disabled 18:44:38 svc:/network/echo:stream
disabled 18:44:38 svc:/network/time:dgram
disabled 18:44:38 svc:/network/time:stream
disabled 18:44:38 svc:/network/comsat:default
disabled 18:44:38 svc:/network/finger:default
disabled 18:44:38 svc:/network/login:eklogin
disabled 18:44:39 svc:/network/rexec:default
disabled 18:44:39 svc:/network/shell:default
disabled 18:44:39 svc:/network/shell:kshell
disabled 18:44:39 svc:/network/talk:default
online 18:43:48 svc:/system/svc/restarter:default
online 18:43:50 svc:/system/installupdates:default
online 18:43:50 svc:/network/loopback:default
online 18:43:51 svc:/milestone/name-services:default
online 18:43:52 svc:/system/filesystem/root:default
online 18:43:54 svc:/network/physical:default
online 18:43:55 svc:/milestone/network:default
online 18:43:55 svc:/system/boot-archive:default
online 18:43:55 svc:/system/scheduler:default
online 18:43:55 svc:/system/identity:node
online 18:43:55 svc:/system/filesystem/usr:default
online 18:43:56 svc:/system/keymap:default
online 18:44:20 svc:/system/device/local:default
online 18:44:20 svc:/system/filesystem/minimal:default
online 18:44:20 svc:/system/cryptosvc:default
online 18:44:20 svc:/system/rmtmpfiles:default
online 18:44:20 svc:/system/identity:domain
online 18:44:20 svc:/system/coreadm:default
online 18:44:20 svc:/system/picl:default
online 18:44:20 svc:/system/sysevent:default
online 18:44:20 svc:/system/device/fc-fabric:default
online 18:44:21 svc:/milestone/devices:default
online 18:44:21 svc:/system/name-service-cache:default
online 18:44:23 svc:/network/initial:default
online 18:44:23 svc:/network/service:default
online 18:44:23 svc:/system/manifest-import:default
online 18:44:24 svc:/milestone/single-user:default
online 18:44:25 svc:/system/power:default
online 18:44:25 svc:/system/filesystem/local:default
online 18:44:25 svc:/system/cron:default
online 18:44:25 svc:/system/sysidtool:net
online 18:44:26 svc:/system/dbus:default
online 18:44:26 svc:/network/shares/group:zfs
online 18:44:27 svc:/network/shares/group:default
online 18:44:27 svc:/network/rpc/bind:default
online 18:44:27 svc:/system/sysidtool:system
online 18:44:27 svc:/milestone/sysconfig:default
online 18:44:27 svc:/system/sac:default
online 18:44:27 svc:/system/filesystem/autofs:default
online 18:44:27 svc:/network/inetd:default
online 18:44:28 svc:/system/utmp:default
online 18:44:28 svc:/system/console-login:default
online 18:44:28 svc:/system/system-log:default
online 18:44:28 svc:/system/dumpadm:default
online 18:44:28 svc:/application/management/wbem:default
online 18:44:28 svc:/system/postrun:default
online 18:44:29 svc:/network/ssh:default
online 18:44:29 svc:/application/graphical-login/gdm:default
online 18:44:29 svc:/application/font/fc-cache:default
online 18:44:30 svc:/network/smtp:sendmail
online 18:44:31 svc:/system/fmd:default
online 18:44:32 svc:/network/routing-setup:default
online 18:44:35 svc:/milestone/multi-user:default
online 18:44:36 svc:/system/intrd:default
online 18:44:36 svc:/application/graphical-login/cde-login:default
online 18:44:36 svc:/application/cde-printinfo:default
online 18:44:38 svc:/system/hal:default
online 18:44:38 svc:/system/filesystem/rmvolmgr:default
online 18:44:39 svc:/network/rpc/gss:default
online 18:44:39 svc:/network/rpc/meta:default
online 18:44:39 svc:/network/rpc/smserver:default
online 18:44:40 svc:/application/x11/xfs:default
online 18:44:40 svc:/network/rpc/ocfserv:default
online 18:44:40 svc:/network/rpc/cde-calendar-manager:default
online 18:44:40 svc:/network/rpc/cde-ttdbserver:tcp
online 18:44:40 svc:/network/rpc/mdcomm:default
online 18:44:40 svc:/network/rpc/metamed:default
online 18:44:40 svc:/network/rpc/metamh:default
online 18:44:40 svc:/network/rpc/rex:default
online 18:44:40 svc:/network/rpc/rstat:default
online 18:44:40 svc:/network/rpc/rusers:default
online 18:44:40 svc:/network/rpc/spray:default
online 18:44:40 svc:/network/rpc/wall:default
online 18:44:40 svc:/network/cde-spc:default
online 18:44:40 svc:/network/security/ktkt_warn:default
online 18:44:40 svc:/network/login:klogin
online 18:44:40 svc:/network/login:rlogin
online 18:44:41 svc:/network/ftp:default
online 18:44:41 svc:/network/rpc-100235_1/rpc_ticotsord:default
online 18:44:41 svc:/milestone/multi-user-server:default
online 18:44:41 svc:/system/zones:default
online 18:44:42 svc:/system/basicreg:default
online 18:45:03 svc:/system/webconsole:console
offline 18:44:30 svc:/application/print/rfc1179:default
Could you please help me to resolve that issue?
Thanks,
Daniel

Solaris Dektop über Windows Remote Desktop freigeben

Hallo,
ich habe folgende Frage:
Für eine Schulung für FachinformatikerInnen (AE und SI) zum Thema
Unix/Linux möchte ich den Solaris Desktop präsentieren.
Gibt es einen Client für Remote Desktop und welche Einstellungen
muss ich vornehmen, um ihn zu aktivieren?
Über Tipps und Ratschläge oder evtl. Alternativen (Xephyr-Freigabe)
würde ich mich freuen.
Gruß
Wolfgang
(Wolfgang Führer IT-Serivces & Training)

Um den Desktop zu deportieren gibt-es nur offiziell XDMCP und VNC.
Für VNC, schaue sie bitte dieses URL : Accessing X11 Display - Oracle Solaris 11.1 Desktop Administrator's Guide
Sie können auch den System/Preferences/Desktop Sharing Tool starten.
Für XDMCP, die Prozedur ist in den gleich Link als VNC aber unter How to Set Up VNC to Provide a Guest Graphical Login Abschnitt.
Und für RDP, bin nicht sicher dass ein Paket für Solaris gibt. Den Source Code ist hier : xrdp

Unable to enable remote desktop (XDMCP) after jumpstart Solaris 10 U9

Hi,
I have installed Solaris 10 U9 using the jumpstart.
I would like to have enabled remote desktop (XDMCP) after installation.
But Solaris 10 U9 has this option disabled:
# ps -ef | grep dt
root 858 450 0 04:56:05 console 0:00 grep dt
root 730 1 0 04:41:39 ? 0:00 /usr/dt/bin/dtlogin -daemon -udpPort 0
I have copied dt config files to /etc:
# mkdir /etc/dt/config
# cp -r /usr/dt/config/* /etc/dt/config/.
Then in /etc/dt/config/Xconfig I've uncommented and added port number:
Dtlogin.requestPort: 177
After reboot this change in Xconfig doesn't enable XDMCP.
Do you know what to change to have XDMCP enabled after jumpstart installation?
Thanks,
Daniel

By default xdmcp will start on udp port 0. normally it should listen on 177.
Try this. you should be able to login through xdmcp after this.
#svccfg -s cde-login setprop 'dtlogin/args=""'
#svcadm restart cde-login

Apple Remote Desktop session questions

Hi all: Just got my new mini server up the running. I have a question concerning Apple Remote Desktop that I would like answered before plunking down $79. I am wondering how ARD handles sessions run from a device with a smaller screen than the device you are trying to control? That is, does ARD do simple screen scaling like you can do in vnc OR does it open a new remote x session that has the appropriate resolution for your device? I am hoping it funcitons the same way MS Remote Desktop Connecton does.

You'd be better off asking this question in the Remote Desktop forum...
ARD supports 2 modes scaling, and "panning". As far as I know, there is no support for what you are describing.

Noobie question -- limits of remote desktop?

Hi there,
I'm confused about the limits of file manipulation with remote desktop. I've got a few quick questions:
-- Can I move files around on various hard drives on the remote computer?
-- Can I drop files onto droplets?
Apologies for the simplicity of the questions. I'm finding it hard to see a definitive list of what you can do and can't do with ARD.
All the best -- thanks for any help.

Can I move files around on various hard drives on the remote computer?
With a UNIX mv command or by taking control of the client system and moving the files as you would if you were sitting at the client workstation, yes. ARD itself has no direct feature for moving or copying files on a client system itself.
Can I drop files onto droplets?
Only by taking control of the client system.
Regards.

Solaris Remote Desktop Question...

Similar Messages

Maybe you are looking for