Solaris SPARC 10 LTO3 XPCIE2SCSIU320 card issue

Hello,
I have installed a new SG-XPCIE2SCSIU320Z (375-3357-03 Rev 50) + mpt firmware 1.3.30.21 on M5000 (Firmware 1071). It's running Solaris 10 u6 with Jan 2010 EIS patches. I am getting *"Connected command timeout for target 3" and "Target 3 reducing sync transfer rate"*
I can see the device files in /dev/rmt/0* but while booting the above message appear! My cable length is 4 meters. HBA is installed in IOU0 slot1.
Please let me know is there any work around?
Edited by: Jeraisy on Jun 5, 2010 1:46 PM

Hi, I'm having the same issue with a SUN T5120, SG-XPCIE2SCSIU320Z, 5m cable, and a SUN LTO3 external tape drive. I am able to backup to the tape drive, but the same errors are reported when trying to read from the tape, and the read fails.
Have you been able to determine the cause?

Similar Messages

Weblogic managed server crash and automatic restart on Solaris SPARC platform

hi Everyone,
We are facing a problem a problem with Weblogic managed server where the managed server crashes and automatically restarts (via nodemanager) on Solaris SPARC platform.
The system info is as below:
OS:                            Oracle Solaris 11.1 SPARC
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
                           Assembled 19 September 2012
uname:SunOS 5.11 11.1 sun4v
(T2 libthread)
rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
load average:1.04 0.52 0.32
CPU:total 4 v9, popc, vis1, vis2, vis3, blk_init, cbcond, sun4v, niagara_plus
Memory: 8k page, physical 16777216k(5930008k free)
vm_info: Java HotSpot(TM) 64-Bit Server VM (23.25-b01) for solaris-sparc JRE (1.7.0_25-b11), built on May 15 2013 04:30:17 by "" with Sun Studio 12u1
The pstack output of analyzing the core file is as below (for the particular thread, I can attach the entire output of pstack if required):
--- called from signal handler with signal 11 (SIGSEGV) ---
ffffffff7ec1a7c4 memcpy%sun4v-hwcap3 (103d34720, 10a7e7710, 108ae1060, 6300, 0, ffffffff5f66394b) + 990
ffffffff36102fa4 ZIP_GetEntry (103d34720, ffffffff636f66a4, bd, 103d347f0, a26f1c, 2f) + e4
ffffffff36103440 Java_java_util_zip_ZipFile_getEntry (2b, ffffffff636f66a4, 103d34720, ffffffff636f6b70, 2b, 1) + a8
ffffffff7586ac1c * *java/util/zip/ZipFile.getEntry(J[BZ)J [compiled]
ffffffff75b61b58 * *java/util/zip/ZipFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry; [compiled] +39 (line 606)
ffffffff75b61b58 * *java/util/jar/JarFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry;+3 (line 452)
ffffffff75b61b58 * *weblogic/utils/classloaders/ZipClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+36 (line 75)
ffffffff75b6eb84 * *weblogic/utils/classloaders/JarClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +6 (line 100)
ffffffff75a40938 * *weblogic/utils/classloaders/AbstractClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +74 (line 58)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/application/utils/CompositeWebAppFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+5 (line 176)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/utils/classloaders/CodeGenClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+43 (line 48)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findLocalClass(Ljava/lang/String;)Ljava/lang/Class;+87 (line 571)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+117 (line 515)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+60 (line 121)
ffffffff75a465c8 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class; [compiled] +71 (line 836)
ffffffff75db42c0 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class; [compiled] +4 (line 714)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+2 (line 358)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+27 (line 83)
ffffffff7580024c * StubRoutines (1)
ffffffff3691f44c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (ffffffff636f7f98, 10234f000, 2, c, 2, 10) + 2f4
ffffffff36e546c0 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_pnGSymbol_63pnGThread__v_ (ffffffff636f7f98, 1013e7748, 10234f000, 10011bf30, 100119ec0, 772d4ec08) + 1b8
ffffffff3725bf0c __1cQSystemDictionaryTload_instance_class6FpnGSymbol_nGHandle_pnGThread__nTinstanceKlassHandle__ (105cb6100, 1013e7978, 10234f000, 102b6e500, 0, 1013e7748) + 494
ffffffff3725a028 __1cQSystemDictionarybEresolve_instance_class_or_null6FpnGSymbol_nGHandle_3pnGThread__pnMklassOopDesc__ (105cb6100, 19dc00, 70, 10234f000, 70, 1013e7700) + ae0
ffffffff37257800 __1cQSystemDictionaryPresolve_or_fail6FpnGSymbol_nGHandle_3bpnGThread__pnMklassOopDesc__ (105cb6100, 1013e76f0, 1013e76f8, 1, 10234f000, 1) + 290
ffffffff368ba9dc __1cTconstantPoolOopDescNklass_at_impl6FnSconstantPoolHandle_ipnGThread__pnMklassOopDesc__ (10201b6e0, 1013e7978, 10234f000, 10201b6e0, 783cfb098, ffffffff37588000) + 264
ffffffff36937380 __1cSInterpreterRuntimeE_new6FpnKJavaThread_pnTconstantPoolOopDesc_i_v_ (10234f000, 77548b730, 49, 10201b6e0, 1013e76e8, 10234f000) + b8
ffffffff7581ab58 * com/jdedwards/base/logging/log4j/JdeLogger.warn(ILjava/lang/String;Ljava/lang/String;Ljava/lang/Object;Ljava/lang/Throwable;)V+14
ffffffff75807bcc * com/jdedwards/system/security/proxy/SecurityServerProxyImpl.install(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/proxy/SecurityServerProxyImpl;+30
ffffffff75806d10 * com/jdedwards/system/security/proxy/SecurityServerProxyFactory.create(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/SecurityServer;+1
ffffffff75807898 * com/jdedwards/system/security/SecurityServerInstance.getInstance()Lcom/jdedwards/system/security/SecurityServer;+27
ffffffff75806d10 * com/jdedwards/mgmt/security/UserManager.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+59
ffffffff75806b24 * com/jdedwards/mgmt/security/UserManagerImpl.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+5
ffffffff75806b24 * com/jdedwards/mgmt/security/SCFLoginModule.login()Z+481
The output of the hs_err_pid1127.log file is as below:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xffffffff7ec1a544, pid=1127, tid=20
# JRE version: 7.0_25-b11
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode solaris-sparc compressed oops)
# Problematic frame:
# C [libc.so.1+0x11a544] memcpy%sun4v-hwcap3+0x710
# Core dump written. Default location: /slot/ems9437/appmgr/Oracle/Middleware/user_projects/domains/smc_domain/core or core.1127
# If you would like to submit a bug report, please visit:
#   http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x000000010294d000): JavaThread "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_in_native, id=20, stack(0xffffffff62f00000,0xffffffff63000000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xffffffff5f6ce000
I ran the suspect code which i believed was causing the issue as a standalone Java program using the same Java executable and it worked fine without any crash.
Appreciate any inputs / discussion / feedback / thoughts on this topic.
Good day.

I just wanted to throw in one more thought. I have also seen that there is a restart=true parameter. Maybe if we set this to true, and just issue the command to shut down the server in the script, the managed server will restart on its own.
Would greatly appreciate any advice!

Upgrade 10.1.0.5 to 10.2.0.4 on Solaris SPARC 64bit (on VCS) Hangs

Hi
Im in progress of upgrading a 10.1.0.5 Database to 10.2.0.4 on Solaris SPARC 64bit with VCS installed.
I installed the base 10.2.0.1 and then 10.2.0.4 and then CPUJAN2010 without failure. I began the upgrade as per the b14238.pdf (Oracle® Database Upgrade Guide 10g Release 2 (10.2) B14238-02 January 2008)
Its seems hung since last Friday morning, but the smon process is first on "top" command so it must be doing something.
Any idea how I can resolve this issue?

upgrade.log
462 -- ALTER USER system privilege
463 -- EXAMPLE
464 -- dbms_epg.authorize_dad('HR');
465 --
466 procedure authorize_dad(dad_name IN varchar2,
467 user IN varchar2 DEFAULT NULL);
468
469 --
470 -- Deauthorizes a DAD's use of a user's privileges to invoke procedures and
471 -- access document tables. The invoker can always deauthorize the use of
472 -- his own privileges. To deauthorize the use of another user's privileges,
473 -- the invoker must have the the ALTER USER system privilege.
474 --
475 -- PARAMETERS
476 -- dad_name The DAD to deauthorize use
477 -- user The user whose privileges to deauthorize. If the user is NULL,
478 -- the invoker is assumed. The username is case-sensitive as in
479 -- the USERNAME column of the ALL_USERS view.
480 -- RETURN
481 -- None
482 -- EXCEPTIONS
483 -- - if the user does not exist
484 -- - if the invoker deauthorizes for another user but he does not have the
485 -- ALTER USER system privilege
486 -- EXAMPLE
487 -- dbms_epg.deauthorize_dad('HR');
488 --
489 procedure deauthorize_dad(dad_name IN varchar2,
490 user IN varchar2 DEFAULT NULL);
491
492 END dbms_epg;
493 /
Package created.
SQL> show error
====================================================
I get the feeling that not all the info has been written to this file.
Previous to this the database took 1.5 - 2 hours to shutdown immediate (straight after startup restrict) with smon process using lots of cpu...may be related to above problem.
(Waiting for smon to disable tx recovery)

Windows ODBC Client for Timesten in Solaris Sparc

Hello, i need help to solve this issue :
I have a Timesten version 5.1.28 ( 32 bits) running in Solaris Sparc and a Windows 2003 server connected to the same network.
I need to install a Timesten ODBC client in my windows 2003 server in order to get connection to my timesten database in Solaris.
How can i get a timesten ODBC client for Windows ??
Thanks for your Help
Luis.

Hi Luis,
TimesTen 5.1 is a desupported release. If you are a licensed TimesTen customer, you need to contact the TimesTen Support team to get your issue resolved as the 5.1 release is not available for download from OTN.
To contact the Oracle TimesTen Support team, please open a Metalink case for the TimesTen product, the product number is 1870. This will get routed to the Oracle TimesTen Support engineers.
If you already have the Windows 5.1.28 TimesTen bits, you can do the client only installation.
-scheung

JMS C API in Solaris SPARC

Hi Mates ,
I am trying to use the JMS C API to invoke a JMS queue from a stand alone C code in SOLARIS SPARC 10 . The Weblogic version is 10.0 patch 2 .
I am not able to compile the program . I am using the following command to compile
CLASSPATH=/weblogic/bea/wlserver_10.0/server/lib/weblogic.jar
export CLASSPATH
LD_LIBRARY_PATH=/weblogic1/bea/wlserver_10.0/server/native/solaris/sparc:/usr/java/jre/lib/sparc/server/.
export LD_LIBRARY_PATH
cc -I/weblogic1/bea/wlserver_10.0/server/include -L/usr/lib -L/weblogic1/bea/wlserver_10.0/server/native/solaris/sparc -L/usr/java/jre/lib/sparc/server -ljmsc -ljvm -lpthread -o JMSClient JMSClient.c
I am getting the following error
Undefined first referenced
symbol in file
sched_yield /weblogic1/bea/wlserver_10.0/server/native/solaris/sparc/libjmsc.so
ld: fatal: Symbol referencing errors. No output written to JMSClient
What could be the issue .
Your help in this will be very useful to me .
Regards
Dinesh
Edited by: user12039447 on Nov 16, 2009 4:10 AM
Edited by: user12039447 on Nov 16, 2009 4:19 AM

It was caused by the 2nd threads' classloader.
          The 2nd thread uses the bootstrap classloader by default when attached to jvm, which loads the 'core' java classes only, not even extended classes.
          <p>
          This cause JNDI factory initialization failed.
          <p>
          The solution is to set the 2nd thread's context loader as the system class loader using JNI. See java.lang.Thread#setContextLoader and java.lang.ClassLoader#getSystemClassLoader.

Install ADF 11.1.2.1 on SOLARIS SPARC?

I want to install ADF 11.1.2.1 but only find 11.1.1.5 installer that Work with solaris sparc
What can i do??

Ahh sorry... My bad.
I am using firefox 10 which seems not supported yet.
I tried on IE 9 and chrome and it's working fine there.
I will try with firefox 4 and post here in case if I find any issue.

ISO DVD w/ multiple extents on Solaris sparc 9

I've created a ISO DVD, (mode 1, 8.3 names, etc..) that contains several files, one of which has multiple extents. This disc does not have rock ridge info on it. This disc mounts and reads fine on linux and on WinXP, but on Solaris Sparc 9 the file that has multiple extents does not read, and something as simple as an "ls" gives an error. All other files on the disc are readable. My question is; does Solaris 9 for SPARC have a known issue reading ISO DVDs containing files with multiple extents?

Hi Vishnu,
Did you get the answer for your question, can you share it with me
Regards

OEM 12c for solaris (sparc) disk2 download failed

I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
Appriciate for your help.
http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
Archive: em12_solaris_sparc64_disk2of2.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
However, this error message is caused by an invalid / incomplete zip file.
I have also tried Oracle Edelivery site with same result.
TIA!

Installing the just released 10.2.0.2 agent on Solaris Sparc

Anyone tried installing the new 10.2.0.2 agent on Solaris Sparc? (Solaris 9). After the agent installs the config fails and I found a bunch of binaries (like emagent) are zero length.
Didn't have any issues installing the previous 10.2.0.1. It took so long for the 10.2.0.2 agent to be released for Solaris, I'm wondering if there's an issue with the package.

Hi all,
Since you all have already gone through upgrade process from 10.2.0.1 to 10.2.0.2,
I need help doing the same.
We have 10.2.0.1 Grid Control installed in test env (solaris 5.9 Sparc), and I am planning to upgrade it to 10.2.0.2.
My question is, when we shut down OMS to apply 10.2.0.2 patch, what happens to the agents? they will not be able to upload the stats, and may get inactive after reaching the disk usage limit.
Also, when we complete the upgrade patch, when OMS comes up, can the 10.2.0.1 agent still talk to the 10.2.0.2 OMS? I am asking this from the logistical point of view. We have 15 servers, and it may be couple of days, before all agents can be upgraded. In that scenario, I wish to keep the Grid Control available for testing barring the agents under upgrade.
We havenot turned on the automatic patch management, and tempted to use the Method 2 of 4.1.2.1 item of the Readme document of the patch.
What were you experiences? and any advices?

Libaio solaris sparc client 11.2.0.3

With Oracle Database 11g Release 2 (11.2.0.3) I have this issue when link my objects:
On Solaris Sparc, solaris 10
libclntsh.so.11.1: undefined reference to `aiocancel@SUNW_1.23'
llibclntsh.so.11.1: undefined reference to `aiowait@SUNW_1.23'
libclntsh.so.11.1: undefined reference to `aiowrite@SUNW_1.23'
libclntsh.so.11.1: undefined reference to `aioread@SUNW_1.23'
Any idea? Do We have to install a particular patch ?
With previous client version I didn't have any issue.
Thanks

Hi,
Please refer MOS tech notes:
*Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC [ID 964976.1]*
*Requirements To Install Oracle 11gR2 RDBMS On Solaris 11 SPARC / X86_64 [ID 1496618.1]*
thanks,
X A H E E R

Crash dump error occur in solaris sparc DB Server

Can some one explain me the how the core dump occurs in solaris sparc server ,
Server has rebooting occurs in plade server

It seems the post was originally in the Certification forum.
That wasn't the correct location (by any stretch of the imagination).
It was moved to the Servers' General Discussion forum because it seems the issue was experienced on a Sun-branded blade system.
However it is an OS question, or perhaps a generic software question.
This thread has now been moved to the General Solaris forum, hopefully for closer topic alignment.
Response #1 is likely going to be the only appropriate answer.
If there is a core dump in the +/var/crash/<hostname>+ directory, then it's an OS issue.
If the core file(s) are elsewhere, then it's an application core and the provider of whatever that application might be will need to be consulted for support.

SD Card Issues and Sound Issues

Hello all,
I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
I am having 2 issues:
1st Issue:
SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
So I changed it to SD Card Storage and all is well (At least, that is what I thought).
After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
2nd Issue:
Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm.
What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
What am I missing here? Any thoughts?
With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
Solved!
Go to Solution.

Hello Rickard,
Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
I have to say, it does seem like that SD Card is defective
Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
If the problem goes away I would consider my 1st issue being solved
However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
Perhaps there's a setting I'm missing?
Your help would be greatly appreciated.

ODSM installation failing on Solaris Sparc

Hi Guys,
we are trying to install ODSM on a Solaris server (Solaris Sparc 11). However the installer is throwing the following error while creating domain -
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] onConfigurationStatus: 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Description: Starting Domain.
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> State: START
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Name : StartDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Type : WLSDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] ________________________________________________________________________________
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->92185386-b8be-44a0-9a5f-0d0bc9657eb4 StatusMsg:Starting Domain.
[2013-01-10T15:50:52.890-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] reportStartConfigAction: EXIT........
[2013-01-10T17:04:38.884-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0]
[2013-01-10T17:04:38.886-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2013-01-10T17:04:38.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2013-01-10T17:04:38.891-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2013-01-10T17:04:38.892-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@50cb14aa
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2013-01-10T17:04:38.893-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2013-01-10T17:04:38.895-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
[2013-01-10T17:21:34.980-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Writing profile to file:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] outputFile:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] in writeProfile method..
[2013-01-10T17:21:34.982-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:COPY_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:LINK_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:CONFIGURATION_TIME_ID for writing.
We couldn't find any way forward for this error Can anyone please advise if they have seen this error in their environment and what is the way forward? Thanks

khaleel2 wrote:
Hi Gurus,
Too frequent INS-32025 errors. Tried everything possible, finally found in oraInstall2012-05-06_07-50-25PM.err file......
---# Begin Stacktrace #---------------------------
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4505)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
Please help soon. Appreciated if you give main points instead of providing document links.errors indicate that cluster (RAC) is involved.
At which step in cluster configuration, does this failure occur?

Z1 SD card issues..Often caused by FAKE SD cards, unbeknownst to the user and those trying to help?

Hi All...
Well for the last month or so Ive had problems with my 64 gb SD card..losing data, getting corrupt and requiring non stop formatting..until eventually it just died totally.
Of course, throughout all this I was searching various forums for fixes and reasons why...and as far as I could see it was the fault of the Z1 'killing' SD cards ( I tried the card in other peoples phones and it did not work either..so I assumed it had been corrupted BY the phone!......since it HAD worked perfectly when i first got it)...
Well...Once it finally died totally this week., I decided to send it back to Samsung for an RMA. The card I had was a good quality, 64gb Samsung Evo SDXC class 10...Bear in mind I purchased it from an Ebay seller that had 1000s of positive feedback (1 or 2 negs regards late postage only) and the card arrived in the post in packaging with hologram etc, and all appeared good quality....
Im actually pretty tech savvy..and indeed internet shopping savvy, and have never been ripped off or conned before.....I didnt buy a 64gb EVo that was ridiculously cheap or anything..I paid what they are worth (then about £27)
But Samsung took one look at it and informed me it was a fake...the issue I had come up against was that the card worked fine up until its ACTUAL (not listed) capacity was reached..which was 7 GIGS!!!..not 64!!!...it was at that point that it started corrupting files and failing in general....
Which in my case was a couple of weeks after installing it in my phone (and the day I got round to piling all my music on it!)......so I had a few weeks of actual use out of it while all seemd fine....enough time to leave positive feedback for the seller and all!.....DEVIOUS SWINES!!! : D.
Anyway,
Now Im wondering...since these symptoms (files vanishing, corrupting etc) have been talked about so many times on these forums and elsewhere...not only on the Xperia Z1, but on all phones and devices that use SD cards...I wonder just how many are REALLY down to fake SD cards.....They are VERY realistic looking fakes...they even work pretty well up to a point (though probs not as fast as a real class 10 if you were to actually test them)..
In future, when offering help to people with SD card issues..i think I will make an effort to ask them first about the provenance of their SD card, and maybe try and get images of it. (after the fact Ive found several websites that show the fake ones...I even found an image of the EXACT fake I have..same serial numbers, and same tiny printing error and all!....which was THIS site https://thecounterfeitreport.com/product/504/Samsung-micro-SDXC-Memory-Cards.html)
In all the threads I pored over, trying to find a fix for my SD card issues..I can not remember a single instance of someone asking if the card was definitely real or not..or anyone suspecting this to be the issue....(though Im sure there ARE, i didnt find one though..not that I would havee thought it was the case with mine,,,,since I had NO reason to think it WAS fake..what with the perfect packaging, and seller having no neg feedback after selling hundreds of them!).
Im not some sort of SD card expert..BUT I am pretty up to date with regards consumer tech.....and until Samsung revealed to me I had been conned...I had absolutely no INKLING that the cause of my issues wa a fake card...on no forums did anyone ask the person with the issue 'are you sure your card is real?'.....and I am really coming round to think that these fake cards are RIFE out there on the market....so realistic looking, package and all, that probably otherwise legitimate sellers are trading in them......the KILLER being the fact they do actually work...maybe for MONTHS if it takes you a while to reach its true capacity....and certainly long enough in many cases to mean the nefarious seller gets away scot free!
So watch out guys...I ceritanly will be in fuiture...Now I know that fake cards are a big thing.....its really easy to spot the fake ones (if the seller uses a REAL picture of the item on the listing!)...they are by no means identical to the real deal when you know what to look for (in the case of fake EVO 64gb like mine, just 'made in Taiwan' and the back being gloss black instead fo white, is enough to show it as fake.....but I did not know that at the time when an absolutely perfect lookng offical Samsung package turned up at my door!....
Anyone else have this yet? Im sure they have....also, anyone wonder now if the cause of their woes is a fake card? If you would like to post here, Im happy to have a look at it!
Thanks all!
(Here is my fake one for you all to see : D...apparently it is a VERY common fake....wish I had known! I also wish i still had the very realistic packaging too!)

Well to be honest I wasnt aware of such things myself until I got stung.....or rather not aware that you could follow all the rules, and do everything right, like check for good feedback, (my seller had 1000s positve and 99% ratio....and not buy items that have a price that is 'too good to be true'...........and STILL get ripped off!
You live and you learn! Ive been shopping online for just about 10 years and this was the VERY FIRST time Ive had a problem of ANY kind!
I had gotten so confident shopping online, that I bought a pretty valuable watch online not a month ago..my first 'large' online purchase in fact.....a Casio GPW-1000 RAF edition... a quite rare '500 pieces in UK' item. Though it came from a large watch dealer, I realise now that it was still a risk (though I had the protection of paying by Credit Card..which I willl ALWAYS do from now on!)....as they may have sold a counterfiet item, and not actually realised it themselves...
Since I have had this experience of buying a counterfeit product,, I haev been reading into the phenomena..and it turns out that Casio G Shock watches (the type I spent a fari bit of money on...a legitimate one luckily!) are very heavily counterfeited...and are ALL OVER Ebay....who seems to do nothing about it!
I can understand (though not condone AT ALL) criminals counterfeiting a sought after watch design, or jewellery and things like that...because they have a market for them, in the shape of people that cant afford the real thing, and think its ok to buy a cheap and poor quality knock off, that only superficially appears to be real.......
...but I have to say its a big surprise to me that they would counterfeit something like an SD card, even if it is a quite highly regarded model.......and even go to such effort to copy the packaging perfectly......I think that the fact that so much effort went into faking a Samsung Evo 64gb sd card ..that it demonstrates that there are a LOT of them out there....hundreds of thousands for sure....but could there be millions?
Due to this prevelance, I think it might well be worth asking each person that comes on the forum with an SD card problem, in particular those with a'new' SD that is losing data, or needs to reformat all the time, or any of the 'giveaway' symptoms...to ask them for an image of the offending article as a starting point.....and to then compare it to images of the real ones that are online...
Im sure most of them will deny they own a fake....I certainly didnt think for one second my problems were due to a counterfeit card...as I said in my post...the first I knew of it was when Samsung themselves informed me!
Otherwise we end up going round in circles trying to 'fix the unfixable'..which is what happend to me : D
Anyway, I will keep an eye out for people on the forum, and a couple of other tech sites I frequent, and see if I can identify any more of these fakes, and hopefully can catch them soon enough that the customers can get their money back, since the problems often dont manifest themselves until the time for immediate refund is passed (once again, this happened to me, and Im having to claim through Paypal..though they are being very helpful...its only £22...but its the principle of the thing!)
Thanks all, and stay vigilant!

Oracle 8.1.6 on Solaris (SPARC) & EJB's

Hi all,
I would like to know if anybody is successfully using Oracle 8.1.6 on Solaris (SPARC) and EJB's or any other JServer Technology? If you have any advice for implementing JServer technologies on Solaris, please feel free to elaborate.
Thanks in advance,
Rob
null

Could you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null

Solaris SPARC 10 LTO3 XPCIE2SCSIU320 card issue

Similar Messages

Maybe you are looking for