Solaris SPARC upgrade failing

I am trying to apply a Solaris 10 upgrade release to my E450 server, but get the following error during the install process:
"Could not reinitialize system state, please exit installer and try again"
Retrying the upgrade gives the same error.
The current release on the server is 10 1/06 and I am trying to move this on to 10 11/06.
Anyone got any idea what it is complaining about, the upgrade process worked OK on my V480/V490 servers!.

Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

Similar Messages

Solaris 10 upgrade fails with "mount failed"

I'm trying to upgrade an aged Ultra 80 to Solaris 10u9 (from Solaris 10u2 or so), so that it can be used for our product testing purposes. After several unsuccessful attempts, I finally freed up enough space on the / filesystem (5.2GB free) by moving /opt to a newly installed second drive.
However, the upgrade now fails with
"Mount failed for either root, swap, or other file system.
Pfinstall failed. Exit stat= java.lang.UNIXProcess@e2892b 2"
At the end of the log file it says
"Checking c0t0d0s0 for an upgradeable Solaris image.
ERROR: Mount failed for either root, swap, or other file system."
I'm stumped. It doesn't say which file system it's having problems with.
Any ideas as to how to troubleshoot this problem, or what the cause might be? At 30 minutes per upgrade attempt, I'd like to know what the cause is rather than pursuing trial and error.
Thanks.

Look at your "vfstab" and see if there are any mounts that need a specific driver like a SAN-provided LUN. Comment them out during the upgrade for the upgrade tries to mount everything in your /etc/vfstab and if it doesn't have the driver/software to do it, it will fail...

First Solaris 11 upgrade fails

Trying to update Solaris 11, it says "unable to clone the current boot environment",
manual creation gives this:
sudo beadm create test
updatevfstab: failed to open vfstab (/tmp/.be.5Saiwr/etc/vfstab): No such file or directory
be_copy: failed to update new BE's vfstab (test)
be_copy: destroying partially created boot environment
Unable to create test.
Unable to find message for error code: 1
cat /etc/vfstab#device          device          mount          FS     fsck     mount     mount
#to mount     to fsck          point          type     pass     at boot     options
/devices     -     /devices     devfs     -     no     -
/proc     -     /proc     proc     -     no     -
ctfs     -     /system/contract     ctfs     -     no     -
objfs     -     /system/object     objfs     -     no     -
sharefs     -     /etc/dfs/sharetab     sharefs     -     no     -
fd     -     /dev/fd     fd     -     no     -
swap     -     /tmp     tmpfs     -     yes     -
rpool/ROOT/release11-1     -     /     zfs     -     no     -
/dev/zvol/dsk/ssd/swap     -     -     swap     -     no     -

Originally it was OpenSolaris, then upgraded to Solaris 11 Express and then to Solaris 11,
beadm list -dsError getting boot configuration from pool rpool: Error while processing the /rpool/boot/grub/menu.lst file([Errno 13] Permission denied: '/rpool/boot/grub/menu.lst')
BE/Dataset/Snapshot Active Mountpoint Space Policy Created
dev-latest-2
rpool/ROOT/dev-latest-2 - - 5.20G static 2010-07-27 15:52
orsol
rpool/ROOT/orsol - - 5.72M static 2011-01-13 14:46
release11
rpool/ROOT/release11 - - 3.65M static 2011-11-17 18:32
release11-1
rpool/ROOT/release11-1 NR / 33.53G static 2011-11-17 18:51
rpool/ROOT/release11-1@2010-09-07-09:32:33 - - 2.22G static 2010-09-07 13:32
rpool/ROOT/release11-1@2011-08-30-11:54:22 - - 1.59G static 2011-08-30 15:54
rpool/ROOT/release11-1@2011-09-26-14:15:49 - - 45.35M static 2011-09-26 18:15
rpool/ROOT/release11-1@2011-10-17-08:30:51 - - 221.18M static 2011-10-17 12:30
rpool/ROOT/release11-1@2011-11-07-10:25:09 - - 287.96M static 2011-11-07 14:25
rpool/ROOT/release11-1@2011-11-17-14:32:46 - - 18.38M static 2011-11-17 18:32
rpool/ROOT/release11-1@2011-11-17-14:51:04 - - 11.81M static 2011-11-17 18:51
rpool/ROOT/release11-1@2011-12-02-09:25:26 - - 410.0K static 2011-12-02 13:25
rpool/ROOT/release11-1@2011-12-02-09:37:22 - - 326.5K static 2011-12-02 13:37
rpool/ROOT/release11-1@2011-12-02-09:40:54 - - 276.0K static 2011-12-02 13:40
rpool/ROOT/release11-1@2011-12-02-09:43:06 - - 229.5K static 2011-12-02 13:43
rpool/ROOT/release11-1@2011-12-02-09:45:16 - - 290.0K static 2011-12-02 13:45
rpool/ROOT/release11-1@2011-12-02-10:03:45 - - 35.0K static 2011-12-02 14:03
rpool/ROOT/release11-1@2011-12-02-10:04:08 - - 35.5K static 2011-12-02 14:04
rpool/ROOT/release11-1@2011-12-02-10:05:40 - - 301.5K static 2011-12-02 14:05
rpool/ROOT/release11-1@2011-12-05-08:46:41 - - 273.0K static 2011-12-05 12:46
rpool/ROOT/release11-1@2011-12-05-08:50:44 - - 279.0K static 2011-12-05 12:50
rpool/ROOT/release11-1@2011-12-05-08:54:36 - - 260.5K static 2011-12-05 12:54
rpool/ROOT/release11-1@2011-12-05-08:57:39 - - 118.5K static 2011-12-05 12:57
rpool/ROOT/release11-1@dev - - 696.84M static 2010-06-24 12:50
rpool/ROOT/release11-1@install - - 2.19G static 2008-09-08 15:45
rpool/ROOT/release11-1@snapshot1 - - 6.07M static 2011-09-09 14:03
rpool/ROOT/release11-1@snapshot2 - - 3.37M static 2011-09-09 15:47
support
rpool/ROOT/support - - 3.28M static 2011-08-30 15:54
support-11
rpool/ROOT/support-11 - - 3.69M static 2011-09-26 18:15
support-12
rpool/ROOT/support-12 - - 5.73M static 2011-10-17 12:30
support-13
rpool/ROOT/support-13 - - 20.76M static 2011-11-07 14:25

Upgrade 10.1.0.5 to 10.2.0.4 on Solaris SPARC 64bit (on VCS) Hangs

Hi
Im in progress of upgrading a 10.1.0.5 Database to 10.2.0.4 on Solaris SPARC 64bit with VCS installed.
I installed the base 10.2.0.1 and then 10.2.0.4 and then CPUJAN2010 without failure. I began the upgrade as per the b14238.pdf (Oracle® Database Upgrade Guide 10g Release 2 (10.2) B14238-02 January 2008)
Its seems hung since last Friday morning, but the smon process is first on "top" command so it must be doing something.
Any idea how I can resolve this issue?

upgrade.log
462 -- ALTER USER system privilege
463 -- EXAMPLE
464 -- dbms_epg.authorize_dad('HR');
465 --
466 procedure authorize_dad(dad_name IN varchar2,
467 user IN varchar2 DEFAULT NULL);
468
469 --
470 -- Deauthorizes a DAD's use of a user's privileges to invoke procedures and
471 -- access document tables. The invoker can always deauthorize the use of
472 -- his own privileges. To deauthorize the use of another user's privileges,
473 -- the invoker must have the the ALTER USER system privilege.
474 --
475 -- PARAMETERS
476 -- dad_name The DAD to deauthorize use
477 -- user The user whose privileges to deauthorize. If the user is NULL,
478 -- the invoker is assumed. The username is case-sensitive as in
479 -- the USERNAME column of the ALL_USERS view.
480 -- RETURN
481 -- None
482 -- EXCEPTIONS
483 -- - if the user does not exist
484 -- - if the invoker deauthorizes for another user but he does not have the
485 -- ALTER USER system privilege
486 -- EXAMPLE
487 -- dbms_epg.deauthorize_dad('HR');
488 --
489 procedure deauthorize_dad(dad_name IN varchar2,
490 user IN varchar2 DEFAULT NULL);
491
492 END dbms_epg;
493 /
Package created.
SQL> show error
====================================================
I get the feeling that not all the info has been written to this file.
Previous to this the database took 1.5 - 2 hours to shutdown immediate (straight after startup restrict) with smon process using lots of cpu...may be related to above problem.
(Waiting for smon to disable tx recovery)

OEM 12c for solaris (sparc) disk2 download failed

I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
Appriciate for your help.
http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
Archive: em12_solaris_sparc64_disk2of2.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
However, this error message is caused by an invalid / incomplete zip file.
I have also tried Oracle Edelivery site with same result.
TIA!

ODSM installation failing on Solaris Sparc

Hi Guys,
we are trying to install ODSM on a Solaris server (Solaris Sparc 11). However the installer is throwing the following error while creating domain -
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] onConfigurationStatus: 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Description: Starting Domain.
[2013-01-10T15:50:52.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> State: START
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Name : StartDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus -> Component Type : WLSDomain
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] ________________________________________________________________________________
[2013-01-10T15:50:52.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->92185386-b8be-44a0-9a5f-0d0bc9657eb4 StatusMsg:Starting Domain.
[2013-01-10T15:50:52.890-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] reportStartConfigAction: EXIT........
[2013-01-10T17:04:38.884-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0]
[2013-01-10T17:04:38.886-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2013-01-10T17:04:38.888-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 92185386-b8be-44a0-9a5f-0d0bc9657eb4
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2013-01-10T17:04:38.889-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2013-01-10T17:04:38.891-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2013-01-10T17:04:38.892-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@50cb14aa
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2013-01-10T17:04:38.892-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2013-01-10T17:04:38.893-06:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2013-01-10T17:04:38.895-06:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JkaSLdW7a695Nf4Eye1GvnD8000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
[2013-01-10T17:21:34.980-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Writing profile to file:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] outputFile:/u01/app/oraInventory/logs/installProfile2013-01-10_03-31-48PM.log
[2013-01-10T17:21:34.981-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] in writeProfile method..
[2013-01-10T17:21:34.982-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:COPY_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:LINK_TIME_ID for writing.
[2013-01-10T17:21:34.983-06:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000JkaOCte7a695Nf4Eye1GvnD8000002,0] Adding Element:CONFIGURATION_TIME_ID for writing.
We couldn't find any way forward for this error Can anyone please advise if they have seen this error in their environment and what is the way forward? Thanks

khaleel2 wrote:
Hi Gurus,
Too frequent INS-32025 errors. Tried everything possible, finally found in oraInstall2012-05-06_07-50-25PM.err file......
---# Begin Stacktrace #---------------------------
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
<Line 206, Column 12>: XML-20211: (Fatal Error) '--' is not allowed in comments.
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4505)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
Please help soon. Appreciated if you give main points instead of providing document links.errors indicate that cluster (RAC) is involved.
At which step in cluster configuration, does this failure occur?

Basic Question Solaris SPARC required for 10.2 upgrade from 9.2

We are running Oracle 9.2 releases on Windows and Solaris SPARC 2.6
SUN 450 Dual UltraSparc II
Where can I find system and OS requirements for Solaris for Oracle 10.2
database? I have looked in many different install guides and they all
reference Solaris 10 but don't say whats required.

You find this information here:
http://www.oracle.com/technology/support/metalink/index.html
For 10g at least you need Solaris 2.8
Werner

Selective export failing - Solaris Sparc - Oracle 10g

HI Gurus,
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.log

Nagaraju P wrote:
HI Gurus,
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.logconsider placing everything on Control file to avoid fighting with the command line interpreter.
my car is not succeeding.
Tell me how to make my car go.
use COPY & PASTE so we can see what you do & exactly how Oracle responds.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Disk Suite/ Solaris 8 Upgrade Problems

Hello,
I am trying to upgrade from Solaris Sparc 7 to 8 and I have Sun Disk Suite mirroring the boot device. When I try to upgrade the installation fails. Is there a way to upgrade from 7 to 8 without breaking the mirror and if not is there a utility that can remove the metadb info and rebuild them after the upgrade.
Thanks,
Bill Bradley

Hello,
I am trying to upgrade from Solaris Sparc 7 to 8 and I have Sun Disk Suite mirroring the boot device. When I try to upgrade the installation fails. Is there a way to upgrade from 7 to 8 without breaking the mirror and if not is there a utility that can remove the metadb info and rebuild them after the upgrade.
Thanks,
Bill Bradley

Installing the just released 10.2.0.2 agent on Solaris Sparc

Anyone tried installing the new 10.2.0.2 agent on Solaris Sparc? (Solaris 9). After the agent installs the config fails and I found a bunch of binaries (like emagent) are zero length.
Didn't have any issues installing the previous 10.2.0.1. It took so long for the 10.2.0.2 agent to be released for Solaris, I'm wondering if there's an issue with the package.

Hi all,
Since you all have already gone through upgrade process from 10.2.0.1 to 10.2.0.2,
I need help doing the same.
We have 10.2.0.1 Grid Control installed in test env (solaris 5.9 Sparc), and I am planning to upgrade it to 10.2.0.2.
My question is, when we shut down OMS to apply 10.2.0.2 patch, what happens to the agents? they will not be able to upload the stats, and may get inactive after reaching the disk usage limit.
Also, when we complete the upgrade patch, when OMS comes up, can the 10.2.0.1 agent still talk to the 10.2.0.2 OMS? I am asking this from the logistical point of view. We have 15 servers, and it may be couple of days, before all agents can be upgraded. In that scenario, I wish to keep the Grid Control available for testing barring the agents under upgrade.
We havenot turned on the automatic patch management, and tempted to use the Method 2 of 4.1.2.1 item of the Readme document of the patch.
What were you experiences? and any advices?

BI Publisher Installation in Solaris 10 x86 failing.

Hello all,
I am trying to install BI Publisher on Solaris 10. During the pre-requisites check, it fails for Checking OS recommended patches, 127111-02 and 137111-04. If I ignore and continue, then the Distributing Repository is failing throwing the error
Error executing nqudmlexec - return code: 1stdout:
stderr:
How can I solve the issue.
Please help its urgent.
Thank you
Cheers
Ash

Hello All,
Finally the installation got finished. The two things that held me for long are these
1) Operating System required Patches showing the wrong patch number. While you run the installer for the OBIEE 11g, during the pre-requisites check it failed for the fore said item. I had to run a lot for the answer.
The answer was pretty simple, the patch number shown by the installer was wrong (127111-02, 137111-04) These two patches are for the Solaris SPARC OS. Weirdly I was running the installation on a Intel Solaris VM. The respective patches for Intel Solaris 10 are 127112-02 and 137112-04, so moral of the story is ensure that these patches are in and ignore the failure message click NEXT
2) Now getting back to the error message posted here "Error executing nqudmlexec - return code: 1stdout:" This is because the LOCALE was not set to UTF-8
Steps to set the locale
i) ensure that UTF-8 is installed in you machine "localeadm -a en_US.UTF-8 -d /cdrom/cdrom0/Solaris_10/Product"
ii) can do a listing using locale -a to make sure that UTF-8 is in.
iii) make sure that the following packages are in "pkgadd SUNWi1cs SUNWi15cs SUNWnamos"
iv) set the LANG variable "export LANG=UTF-8"
And I had a smooth run. :) The pain was over...
Ash

Solaris 10 upgrade - Major problems - PLEASE HELP

I have a v880 running Solaris 10 11/06 (U3) which I am trying to upgrade to the latest Solaris 8/11 (U10) release without much success. I am simply using the Solaris Installation Program and booting from DVD and running the upgrade option. However the process fails with the following error:
The selected Software exceeds the available disk space.
The Solaris operating environment selected to upgrade contains
a metadevice. Disk Space Re-allocation is not allowed.
Please do one of the following:
Deselect some software to be installed.
Choose another version of Solaris to upgrade. (If available)
Go back and select Initial Install.
Exit the installation.<Press ENTER to continue>
A df -h shows that / has 22Gb free, swap space is 3.1Gb free, /var has 7.1Gb free and /usr 3.1Gb free. All the documentation seems to show that that is ample space. I'm relatively new to Unix and Solaris so be gentle with me if I'm doing something stupid. Many thanks to all. An initial install is not an option as I need to keep the setup as is.

It's probably /usr that it's whining about. It's not very exact when calculating space and 3.1G is not ample space these days. This is why I put everything in the / partition anymore. Don't have to worry about this crap down the line...
You might try copying some stuff off of /usr (if you can find it) and try again.

10.2.0.3 Patch for solaris SPARC

Hi All,
We have 10.2.0.1 database running on Solaris Sparc.We are planning to upgrade to 10.2.0.3 directly instead of upgrading to 10.2.0.2
Do we have the patch 10.2.0.3 ready to dowload from the metalink..
If so please give me the patch number..
Thanks In Advance for the reply ASAP

Have not seen any fixed dates regarding the release of the 10.2.0.3 patchset. Searching Metalink showed some forum answers that suggest sometime in December 2006.

W2100z Supplemental 2.5 XpReburn produces non-bootable ISO in Solaris Sparc

Just posting in case helps someone else...
The XpReburn script from the W2100z Supplemental 2.5 CD is commented as being able to run on Solaris Sparc:
# This script was developed on Solaris X86. It will run on Solaris Sparc
# and Red Hat Enterprise Linux 3. It is not guaranteed to work unmodified
# accross all versions of Linux. This script is experimental. Some end user
# MODIFICations may be necessary for it to run on other linux distributions
# and system configurations.Running XpReburn under Solaris Sparc 10 produced an .ISO image apparently without error, but the resulting image would not boot.
Found the cause of the non-bootable image was the following section of XpReburn. It was using dd and od to extract 16-bit LBA values. On Solaris Sparc it ended up reading little-endian values as big-endian, hence extracting the boot loader from the wrong part of the XP CD. To get it to work under Solaris Sparc added conv=swab twice as shown below:
# Read the boot loader from the CD into the image directory as a file. This process takes
# several steps because the boot record has to be consulted to locate the RBA (the
# starting LBA of the boot catalog). The boot record always resides at LBA 17
${ECHO} "Reading WinXP Boot Loader from CD..."
${ECHO} " Looking up boot catalog lba from boot record..."
${DD} if=$CD_DEVICE bs=2048 count=1 skip=17 | ${DD} bs=71 skip=1 count=1 | ${DD} conv=swab bs=4 count=1 of=$SCRIPTDIR/foo
BOOTCATLBA=`od -d $SCRIPTDIR/foo | ${AWK} '{print $2}'`
${ECHO} " Boot Catalog is at LBA $BOOTCATLBA, looking up boot image LBA..."
${DD} if=$CD_DEVICE bs=2048 count=1 skip=$BOOTCATLBA | ${DD} bs=40 skip=1 count=1 | ${DD} conv=swab bs=4 count=1 of=$SCRIPTDIR/foo
BOOTIMGLBA=`od -d $SCRIPTDIR/foo | ${AWK} '{print $2}'`
${ECHO} " Reading Boot Image from LBA $BOOTIMGLBA..."
${DD} if=$CD_DEVICE bs=2048 count=1 skip=$BOOTIMGLBA | ${DD} bs=2048 count=1 of=$IMAGEDIR/$BOOTIMAGE
${RM} -f $SCRIPTDIR/fooWith the above mod, XpReburn generated an image which booted the XP Pro installer and allowed XP to be installed.

MAAL wrote:
have thought about submitting this hint/article to the BigAdmin community ?
http://www.sun.com/bigadmin/common/submittals.html
Michael,
Reading the submission guidelines it appears BigAdmin is for you own work:
By submitting content to the BigAdmin portal, you are attesting that your submission is your own non-confidential property and does not infringe the intellectual property rights of any party.
Whereas my "hint" above is really a bug report / enhancement request for a Sun supplied script.
I only have a basic support plan so don't think I can raise a bug report.
Also:
1) The modification listed was a quick hack to get the script to work under Sparc Solaris, but which would have caused the script to generate a non-bootable ISO if run under X86 Solaris.
2) If you run the script on a ZFS filesystem you get an error that the filesystem isn't local - the script should be updated to consider a ZFS filesystem as local.
3) If the script is run on a Solaris system with two optical drives, the script fails with an error because fails to correctly read the volume name of the XP CD. Can't remember the details, but just hacked the script to work.
So, so for now will just leave the "hint" in this thread.

ERROR install oracle database 10gR2 in solaris sparc 64

Dear All,
I got error when installing oracle database 10gR2 on solaris sparc 64.
these are the messages:
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
/usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
.0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
/10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
-lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
/opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
any help would be appreciate.
Thank you
Regards,
Spirit

I'm not sure with the solaris sparc 64.
but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
http://forums.oracle.com/forums/thread.jspa?messageID=1254866
probably it will help you.
sorry, this is just my guessing of your problem.
thanks

Solaris SPARC upgrade failing

Similar Messages

Maybe you are looking for