Solaris: Syntax errors on all db2 commands run in terminal
DB2 Express 9.5 x86 installed on Solaris 10 x86.
Just about every DB2 command I run gets some type of syntax error.
There has to be some additional configuration required after installing DB2.
When I run these without the sh in front, I get a "command not found" message.
Here are edited examples.
I had to remove some of the disallowed content from the examples and replace with xxxx's.
Examples:
bash-3.00# sh db2level
db2level: xxxxxxxx: not found
db2level: syntax error at line 19: `(' unexpected
bash-3.00# sh db2
db2: syntax error at line 3:
bash-3.00# sh db2fs
Usage: dirname path
db2fs: test: argument expected
bash-3.00# sh db2admin
db2admin: syntax error at line 2:
`"#' unexpected
bash-3.00# sh db2daslevel
db2daslevel: syntax error at line 1: `(' unexpected
bash-3.00# sh db2fmd
db2fmd: syntax error at line 20: `(' unexpected
bash-3.00# sh db2diag
db2diag: syntax error at line 8: `(' unexpected
Definitely the wrong forum for those questions.
Similar Messages
-
Syntax error in program SAPLRRK0 - while running query in Bex/Portal
Hi all,
we just transported all the objects from dev to QA and data is loaded and everything went good. We are SPS9 and front end patch 903
Now I am trying to run queries on Bex analyzer and portal and I am getting this error.
"Syntax error in program SAPLRRK0."
Also on portal I am getting these extra messages
Error while executing function module: BICS_PROV_SUBMIT_VARIABLES
Error while executing function module: BICS_PROV_OPEN
I am researching but any input is appreciated.
Thanks,
KiranThanks Prakash,
I understand the pre-requisite notes issue but when we are moving like 50 notes from BW Dev to BW QA i am not sure how it works. I overheard the basis guy saying he is going to appy notes as per time stamp they were applied in BW Dev system. I will check on that though.
I have applied notes 969330, 969772, 977912,978359, 981814, 987135 in last 2 weeks. (which probaly are some how related to the issue). We have also applied some BI-Java notes in Portal Dev which are not transported to Portal QA.
Thanks,
Kiran -
How can I trap & display HTML syntax errors in mx:HTML at run time?
I am loading HTML pages into an mx:HTML component in an AIR application. If the HTML contains errors, they show up in the trace window in debug mode. I'd like to trap that information so I can tell the usere that there are errors (and what they are) in the production version of the application. How can I get at those errors?
I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
lr_if_controller TYPE REF TO iwci_salv_wd_table,
lr_cmdl TYPE REF TO cl_salv_wd_config_table,
lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
elem_year TYPE REF TO if_wd_context_element,
stru_year TYPE if_alv_layout=>element_importing,
item_year LIKE stru_year-i_current_year,
lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
EXPORTING
name = 'IMPORT_NODE-PARAMETER'
IMPORTING
value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( lf_string ).
endif. -
Display the all syntax errors in output list
Hi All,
we are upgrading 3.1h to 6.0 version.
so we are checking the syntax Errors for all custom programs ,
For each customprogram it is showing only the first syntax error . I'd expect to show all of them.I have checked the syntax check and also code inspector ,but the result is same .
So could you please help me how do I get the all the syntax errors
from top to bottom for each program .
Looking forward to your replies.
Thanks for advance.
Thanks ,
Bala.Hi Rob,
Thanks for helping. That program is showing only syntax errors for all collection of custom programs but not each program .
Thanks,
Bala. -
OIM: Syntax Error running SampleHttpClient
Hi,
I'm trying to execute the SPML java client located in <inst home>\server\xellerate\SPMLWS\SampleHttpClient.
I get a syntax error, but I'm actually running the program unchanged using the unmodified xml request file in the SampleHttpClient\sampleRequests directory.
Someone has ever played with this little program? Ever had this problem?
Below the error.
Env: OIM 9.1.0
App serv: JBOSS
Thank you.
---------------- error-----------------
E:\oracle\product\9.1.0\server\xellerate\SPMLWS\SampleHttpClient>java testspml.SendSPMLRequest addRequest_x_User.xml
Setting System properties after reading the properties file
ten.mydomain.com
8080
http
JBOSS
./sampleRequests/JBOSS
./response
requestFile = ./sampleRequests/JBOSS\addRequest_x_User.xml
Exception in thread "main" org.xml.sax.SAXParseException: Expected "</HR>" to terminate element starting on line 1.
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at testspml.SendSPMLRequest.main(SendSPMLRequest.java:68)Hi,
make sure you have deployed the SPML WS first as per:
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10366/spml.htm#CHDEGDEC
The error you are getting is in fact an generic error from the JBOSS saying that the path was not found on the server. And <HR> is just an HTML tag of that error page.
Look in the provided code and make sure you can reach the link first in the browser.
BR.
Octavian -
Entry-SQL syntax error: CASE not allowed
Hello All. When I use sap netweaver developer to develop webdynpro applications, I always meet that jdbc error.
when using inner join,left join, or using case when in the sql, it will pop up Entry-SQL syntax error.
But I have run the sql in Microsoft SQL Server studio successfully.
The SQL statement "UPDATE SAPNWDDB.Z_SERIAL SET LASTSERIAL = CASE WHEN ENDWITH IS NOT NULL THEN CASE WHEN LASTSERIAL + 1 > ENDWITH THEN ISNULL(STARTWITH, 0) ELSE LASTSERIAL + 1 END ELSE LASTSERIAL + 1 END WHERE SERIALNO = ?" contains the syntax error[s]: - 1:43 - Entry-SQL syntax error: CASE not allowed
- 1:78 - Entry-SQL syntax error: CASE not allowed
- 1:124 - SQL syntax error: the token "(" was not expected here
Can someone help me? Thank you.Hi Arun Jaiswal ,
Thank you for your answer. But I have tried query in sql editor. Actually it can work. Other than "CASE" syntax, it seems not support inner join and left join in webdynpro either. I even can not query the db views.
That's imposible jdbc not support these simple syntex. I wonder there is any config control the sql compatibility level.
I have developped a java programm to test it. It is ok. No error. But the same case pop up error in java webdynpro application.I don't know why.
I am entry level webdynpro developper.
Hopefully you can help me.
Thank you.
Edited by: zegunlee330 on Sep 3, 2010 4:18 AM -
Activation of ABAP not possible due to wrong syntax error
Hi All,
I copied some FORMs in a new include, to keep the "old" includes as they are after testing the bugfix.
Now I face the syntax error, that all of this copies methods are already there "a FORM already exists with this Name..."
BUT: This is not true, each copied FORM only exists once in the program. All includes are active, just the newest I created. I cannot activate it.
Even If I reneame the FORMs, then I get the error for the new name, I've never used before.
Do you have any suggestions, what to do?
regards
VolkerHi Volker ,
Either you replace old include program with New include then your new FORM will be cativate and if you cahnge Form Name with different then please check where old perform was there and change perform name also in your include program then it will be work.
Regards,
Prasenjit -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
Problems SAPBK70012. Logon: syntax error. Error -904: maximum locks in DB2
Hello:
IF I LAUNCH THE TP WITH THE COMMAND I'VE A CONNECTION ERROR.
What is the problem?
E:\usr\sap\SMG\DVEBMGS01\exe>tp import all SMG pf=
d1mappsapd1\sapmnt\trans_SMG
\bin\TP_DOMAIN_SMG.PFL tag=spam -Dclientcascade=yes -Drepeatonerror=8
This is tp version 371.02.23 (release 700, unicode enabled)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter R3_DB2_SSID is no longer used.
Warning: Parameter RSDB_ICLILIBRARY is no longer used.
ERROR: Connect to SMG failed (20070717140740, probably wrong environment).
TRACE-INFO: 1: [dev trc ,00000] Tue Jul 17 14:07:40 2007
305 0.000305
TRACE-INFO: 2: [dev trc ,00000] load shared library (dbdb2slib.dll), hdl 0
11 0.000316
TRACE-INFO: 3: [dev trc ,00000] using "E:\usr\sap\SMG\DVEBMGS01\exe\db
db2slib.dll" 25 0.000341
TRACE-INFO: 4: [dev trc ,00000] dbs/db2/use_accounting = 1 -> DB2 accounti
ng is switched on
TRACE-INFO: 5:
232 0.000573
TRACE-INFO: 6: [dev trc ,00000] dbs/db2/use_drda_lob_handling != 1 -> SAP
LOB handling is used
TRACE-INFO: 7:
15 0.000588
TRACE-INFO: 8: [dev trc ,00000] dbs/db2/opt2_hint = 0 -> implicit 'optimiz
e for 1 rows' is switched on
TRACE-INFO: 9:
16 0.000604
TRACE-INFO: 10: [dev trc ,00000] dbs/db2/rs_by_hint = 1 -> isolation level
RS by hint is switched on
TRACE-INFO: 11:
13 0.000617
TRACE-INFO: 12: [dev trc ,00000] DB2Trace: valid syntax for parameter dbs/
db2/nupd_stop: <reason1>,<reason2>,...<reasonn>; length of reason = 8
TRACE-INFO: 13:
21 0.000638
TRACE-INFO: 14: [dev trc ,00000] DB2Trace: List of reason codes for parame
ter dbs/db2/nupd_stop
TRACE-INFO: 15:
13 0.000651
TRACE-INFO: 16: [dev trc ,00000] DB2Trace: 00C90096
8 0.000659
TRACE-INFO: 17: [dev trc ,00000] DB2Trace: 00C20031
8 0.000667
TRACE-INFO: 18: [dev trc ,00000] DB2Trace: 00E7000F
7 0.000674
TRACE-INFO: 19: [dev trc ,00000] DB2Trace: 00C20255
8 0.000682
TRACE-INFO: 20: [dev trc ,00000] DB2Trace: 00C900A5
8 0.000690
TRACE-INFO: 21: [dev trc ,00000] load shared library (db2cli64.dll), hdl 1
8113 0.008803
TRACE-INFO: 22: [dev trc ,00000] using "C:\PROGRA~1\IBM\SQLLIB\BIN\db2
cli64.dll" 10 0.008813
TRACE-INFO: 23: [dev trc ,00000] SQL DRIVER VERSION is "08.02.0007"
53 0.008866
TRACE-INFO: 24: [dev trc ,00000] DB2 Connect Version less than 09.00.0000:
Use FAT client.
TRACE-INFO: 25:
18 0.008884
TRACE-INFO: 26: [dev trc ,00000] DB2Connect driver identified as FAT CLIEN
T 8 0.008892
TRACE-INFO: 27: [dev trc ,00000] load shared library (db2app64.dll), hdl 2
119 0.009011
TRACE-INFO: 28: [dev trc ,00000] using "C:\PROGRA~1\IBM\SQLLIB\BIN\DB2
APP64.dll" 8 0.009019
TRACE-INFO: 29: [dev trc ,00000] load shared library (db2sys64.dll), hdl 3
103 0.009122
TRACE-INFO: 30: [dev trc ,00000] using "C:\PROGRA~1\IBM\SQLLIB\BIN\DB2
SYS64.dll" 8 0.009130
TRACE-INFO: 31: [dev trc ,00000] DBSLHA: Using old Failover Support
172 0.009302
TRACE-INFO: 32: [dev trc ,00000] DBSLHA: Password Service failed: SAPSYSTE
MNAME not set (profile or environment)
TRACE-INFO: 33:
31 0.009333
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
meaning:
tp showbuffer SMG pf=
d1mappsapd1\sapmnt\trans_SMG\bin\TP_DOMAIN_SMG.PFL
This is tp version 371.02.23 (release 700, unicode enabled)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter R3_DB2_SSID is no longer used.
Warning: Parameter RSDB_ICLILIBRARY is no longer used.
SMG buffer:
TASK |PROJECT |P|CMD Im|DD Im |DD Act|MainIm|Enq.Ac|A
DO Im|VersFl|Deploy|XPRA |Gener |UMODE|TAGS
---------------+--+--+----+-
----------+--+--+-+--
SAPKLES40SR1SOLMANF0| | |*4000 | | |1 | |
1
SAPKLES40SR1SOLMANF1| | |*4000 | | |1 | |
1275
1
SAPKLES40SR1SOLMANF2| | |*4000 | | |1 | |
1867
1
SAPKLES40SR1SOLMANF3| | |4000 |0012 | |1 | |
12
SAPKLES40SR1SOLMANF4| | |*4000 | | |1 | |
839
1
SAPKLES40SR1SOLMANF5| | |*4000 | | |1 | |
147
1
SAPKLES40SR1SOLMANF6| | |*4000 |3 | |1 | |
7
1
SAPKLES40SR1SOLMANF7| | |*4000 |2 | |1 | |
24
1
SAPKLES40SR1SOLMANF8| | |*4000 |2 | |1 | |
2
1
SAPKLES40SR1SOLMANF9| | |*4000 |2 | |1 | |
1
SAPKB70012 | | |will not be imported because it is t
agged.
SAPKA70012 | | |will not be imported because it is t
agged.
SAPKIPYJ7C | | |will not be imported because it is t
agged.
SAPKW70013 | | |will not be imported because it is t
agged.
SAPKNA7009 | | |will not be imported because it is t
agged.
SAPKU50009 | | |will not be imported because it is t
agged.
SAPKITL422 | | |will not be imported because it is t
agged.
that makes 10 transports to be imported.
tp finished with return code: 0
meaning:
Everything OKI've put out the environment variable dbms_type=db2 and now the problem is the next
E:\usr\sap\SMG\DVEBMGS01\exe>tp import all SMG pf=
d1mappsapd1\sapmnt\trans_SMG
\bin\TP_DOMAIN_SMG.PFL tag=spam -Dclientcascade=yes -Drepeatonerror=8
This is tp version 371.02.23 (release 700, unicode enabled)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter R3_DB2_SSID is no longer used.
Warning: Parameter RSDB_ICLILIBRARY is no longer used.
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to SMG failed (20070717141407).
INFO: no trace information stored
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure -
Syntax error while running the Adobe Form
Hi to all,
I have created an interface for adobe from
Example: F4_HELP type ZST
Where ZST is structure type.
ZST structure has following field.
1) MATERIAL type MATNR
2) BASE_QTY type BASMN (BASMN of type QUAN, length 13 with ref table RC29K, and ref field BMEIN)
Interface and form successful activated.
But when I run adobe from it give syntax error for ref table RC29K, and ref field BMEIN
Field u201CRC29K- BMEIN u201Cis unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
Please can anyone tell me the solution for that?
I shall be thankful to you for this.
Regards
Pavneet RanaThanks For reply
I have already maintained the ref table and field for field BASE_QTY type BASMN
Ref table RC29K, and ref field BMEIN.
But still error is coming.
please can any one tell me the solution for that.
i shall be thankful to you for this.
Regards
Pavneet Rana -
Syntax Error while running step 34 (35) after unicode conversion
Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR 2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103] CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH [abgen.c 1388]
A *** ERROR => > Include LBTCHF39 line 173 [abgen.c 1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c 1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC [abgen.c 1388]
A *** ERROR => > Include LSALCU54 line 55 [abgen.c 1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c 1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno 60
sid S01
systemid 274 (HP (IA-64) with HP-UX)
relno 6400
patchlevel 0
patchno 258
intno 20020600
make: single threaded, Unicode, 64 bit
pid 20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA 640 0021 SAPKA64021
SAP_BASIS640 0021 SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus HellsingHello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 30 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39 |0000014869 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(CNV) WARNING: code page conversion problem
Number of substitutions: 2
(row 41 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32 |0000021982 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
Number of substitutions: 1
(row 3519 of current buffer, table SFIWP)
LANGU 4a |J |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B |
WORDF 20 20 20 20 20 20 20 20 | |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing -
Syntax error when running GLPLUP - Flex Plan Upload
HI,
We want use transaction GLPLUP to perform a Flex Plan Upload, but encounter a syntax error in program RK50003 stating:
The following syntax error occurred in program "RK500003 " in include
"PP_FISL_GINC " in
line 652:
"The data object "ITDAT1" does not have a component called "XBILK"."
This program is a local object, and appears to be generated by SAP. Checking the program attributes the owner and the last person to change this program is a consultant who has rolled off the project, and is not available for help.
I suspect that there must be some steps to regenerate this code, but I am not certain where to look for this information.
I have tried running GLPLDEL and GLPLINSTALL, but this did not change RK500003.
Any insight you can provide on this is greatky appreciated.
Thanks,
RoyHI,
I reported this issue with SAP and the following is what they had me do to resolve the issue:
1. Run transaction GLPLDEL:
Deletes all generated reports of the planning processor for
FI-GL/SL planning (application class GLU1). After a new call of
the planning, these reports will be generated once again.
2. Run transaction GLPLINSTALL:
It regenerates necessary database table entries for FI-G/SL Planning
(tables t8pl*). Make sure that you will perform this step when no
posting of FI-SL data is running.
This resolved the issue for us.
Good luck,
Roy -
Session keeps running when the query has a syntax error
I have a weird scenario.
Take this query for example: select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6));
This query has a syntax error as there is an additional bracket at the end. I know that. When I run it on STJOSE database the session keeps running and never returns. Even if I stop it, it does not. I try to disconnect, it says "Connection is currently busy. Try again?" This behavior is pretty consistent on STJOSET. If I run this query on UMASS database it gives me this error (as expected)
ORA-00933: SQL command not properly ended
00933. 00000 - "SQL command not properly ended"
*Cause:
*Action:
Error at Line: 1 Column: 99
I do not know what is wrong with the STJOSE database connection that causes the session to hang and never return.
Please help.
-Nags
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production (both databases)
SQL Developer Version 3.0.04 Build Main-04.34This does not happen in sql*plus. It does not hang. It returns a proper error message.
HSI@stjose> select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6));
select distinct physassignednum from hsi.docdeficiency where delinqlevel> 0 and dfcystatus in (1,6))
ERROR at line 1:
ORA-00933: SQL command not properly ended
HSI@stjose> -
Hi ,
I am getting below error frequently in alert log of database.
ORA-12012: error on auto execute of job 754461
ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, parameters in command "RCPT TO:" unrecognized or missing
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at "APPS.EIS_UTIL_PKG", line 94
ORA-06512: at "APPS.HKD_PO_ADDON_PKG", line 110
ORA-06512: at line 1You have a job running in the database. Its job ID is 754461
It looks as if that job runs APPS.HKD_PO_ADDON_PKG
That job is attempting to send mail using UTL_SMTP and apparently passing some strange value to SMTP server for the RCPT TO: parameter. -
Syntax error running J2EE server
I am trying to run the J2EE server in windows 98, I have set all of the enviroment variables but recieve 3 syntax errors when I run the J2EE program, it then attempts to run java but it acts as though the program has been run with no arguments passed and just tells me the possible arguments for the java program, could u please help me
Leviking ... what do you mean by a non-server machine?a non server machine is called a workstation, it is usually a machine that other machines on the network do not depend on.
If I have a j2ee server (for example JBoss, Websphere, Resin, etc.) installed and running on my machine (be it >win95), I'm in business, ain't I?sure but if you follow your class well you know that a J2EE server is a distributed server that enables clients(workstations) to access a large object store ( bin) and that centrelizes the informations, that's why a win 98 machine alone is only good for developping and learning at home and will be no good to a business for example.
If you mean that the machine won't be able to handle the load ... well, for testing and learning ... there ain't no load >so that be the purpose! your definetly right here to learn and try stuff it's good but load control is an important part of a well develop j2ee application. and i tough you would of like to know it
keep up the good work
Maybe you are looking for
-
How to make two files into one?
I got two .iso files I would like to make into one file. What program can I use for this process? And step-by-step if possible.
-
How to apply a format to all hyperlink in CS4 file
Hello, this is my first post, We are writing a magazine that we will publish as a PDF. We would like all hyperlink to stand out (we created a character style with these attributes: Candara Bold, Dark Red). The magazine will have a lot of hyperlinks i
-
Cellular Data page- wrong status
Hi. My 3G account works fine, but when I log into my Cellular Data Account dialog box (Setting > Cellular Data > View Account), the status shows "You have no domestic data left" and is stuck showing an old billing period (November 2010). My detailed
-
Websphere Portal Integration Kit
Hi, I have gone thru the Websphere PIK and notice that the Authentication method that it supports is either secEnterprise or secLDAP with Siteminder. Can we integrate with Windows AD and single sign on for Webphere PIK? thanks and regards nora
-
I wanted to buy an application, but always an error (contact itunes support to complete the transaction). Apple removed the $ 2 and no result. ( price on application 0.99 ) . Rogues !!!!!!