Solaris Time setting

Hello,
I am using Solaris 10 x86.In pakistan govt fwd time to 1 hour for day light saving.I have to set the system time how can I do so?My SMC is not running and giving problem so I can't change system time/date from there.My system is independent and not part of domain.
regards,
tanveer

Perhaps your hardware is bad.
When 'date' runs, it should set both the time kept by the OS, and the time-of-day clock on the computer. That's where the time comes from when the OS boots.
Shut down the machine, then when you boot, go into the BIOS to look at the time. Is that clock broken?
Darren

Similar Messages

RAC: Time set on servers

Hi all, I am using Oracle 10gR2 on Solaris 10.
My two servers are in a RAC env. Both of them have a different time set. There is a difference of about 12 minutes. Does it make a difference? Is it important that I synchronize the time?
Regards.....

Hi,
Yes, it does make a difference.
According to the instructor in the 10gR2 RAC course, time difference of 15 minutes and more will result in a so-called 'eviction': One instance will decide the other instance is no longer there, and disconnect it, and reconfigure itself to run standalone.
You need to synchronize the time using a NTP server (NTP=network time protocol), manual synchronization is not good enough.
Please note on 9iR2 I already experienced an eviction with a much smaller difference, you have been lucky.
Sybrand Bakker
Senior Oracle DBA

How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?

I was wondering how to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar? If I change a location in mavericaks it is updated in my iOS 7 calendar, but if I add travel time to an appointment, that does not show up on my iphone. This seems like a big miss for apple if this is the case. I could maybe understand not adding the ability to add travel time in iOS 7, but not being able to see the travel times you set up seems very incomplete. Any ideas or insight?

Hello Cheer,
I don't believe the table changed when migrating from Access. I had two tables before the migration, one was for the SwitchBoard Manager and the other table was for the database table. I used the Switchboard to navigate to different menus, such
as the Main Form, Power Form, Server Form, etc. Let me know if I can provide any other information to help you narrow this down for me.
Thank you for your assistance.
Thai

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Having very difficult time setting up and running time capsule and airport

I am having a very difficult time setting up and running airport express and time capsule. My time machine is not being recognized by my mac. The amber light keeps blinking. I'm ready to stsrt over.

#3 for itunes streaming. I reset the base station and eventually was able to get the backup working and now my green light is on. Next I'd like to be able to play itunes using Airport Express and have connected to my stereo receiver in another room.
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing TC's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

How to change LACPDU timer setting on Microsoft Network Adapter Multiplexor Driver

We’re installing our first Windows 2012 R2 server, and one of the network settings is different from what’s on a comparable Windows 2008 R2 server, and it's not what our network group would like to see connected to their switches. Both servers have
2 NICs teamed using the LACP protocol and are connected to 2 different switches for high availability. In both cases I just teamed the NICs with whatever driver was on the server.
On the 2008 R2 server (the one our network group likes), it’s an Intel driver, “Intel(R) Advanced Network Services Virtual Adapter”. On the 2012 R2 server it’s a Microsoft driver, “Microsoft Network Adapter Multiplexor Driver”. The setting that
our network group is concerned about is the LACPDU timer setting. Apparently it can be either “fast” or “slow”. What they see on the switches is that on the 2008 Intel driver NICs the setting is “slow” and on the 2012 Microsoft driver NICs the
setting is “fast”. The switches are expecting “slow”.
I spent some time searching on Microsoft.com and other places, as well as poking around on the server, but I couldn’t find that setting or how to change it on the Microsoft Network Adapter Multiplexor Driver. Does anyone know how I can change it?
Thanks!

Hi,
According to my knowledge, we can’t change the value of LACP timer.
Here is a related question,
How to change LACP timer-value on Windows server 2012 Network Teaming, from short to long?
http://social.technet.microsoft.com/Forums/en-US/05e2761f-e165-44f6-9bed-d91e9eeba687/how-to-change-lacp-timervalue-on-on-windows-server-2012-network-teaming-from-short-to-long
Hope this helps.
Steven Lee
TechNet Community Support

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

The date and time setting go crazy[SOLVED]

Hello,
Each time, I boot up the time setting changes. Sometime two hours behind, sometimes five. Even if I set the time and date by using the "date -s" command or kde time setting feature when reboot the time changes.
Any idea how to fix this for good?
Thanks,
jmak
Last edited by jmak (2009-11-20 00:19:17)

Thanks for all the suggestions.
This what happened. From some strange reasons the system clock setting and the distro setting were different. The bios clock was two hours before the distro clock. I adjusted the bios clock to real time—to correct time thinking this will set the disto time to the correct time too. Rebooted and I was put on the commandline with an error message:"superblock last mount time Thu Nov 19 11:41:29 2009, now=Thu Nov 19 10::53:27 2009 is in the future"
Then I entered the root password and did a "fsck" and rebooted. It booted up fine
but the distro time setting was still wrong. Rebooted again and checked the bios clock and it was reset to the distro clock. Both were wrong but at least have the same settings. Then I boot up again and set the time to the right setting in KDE. Rebooted and checked the bios clock which was adjusted to the distro setting—in other words to the correct settings. Now the time is ok. So it seems that the bios setting depends on the distro setting. I thought it was the other way around.
My computer is relatively new, 2 years old, so I dont think this was a battery problem. Also, I have other distros installed and I haven't experienced these kinds of problems with those distros.
Lately, I experimented with a few distros on different partitions, and what I am suspecting is that those might reset the bios clock which caused the inconsistencies in Kde.
jmak

Time Setting Always Wrong

For some strange reason, when I turn the "Set Automatically" on in the date and time setting, it jumps a day ahead and gives me some bizarre time at 1:30am... The time seems to only work when it's set manually. I know, no big deal... But what is causing it to do that?

Hi,
Set automatically? I see Time Zone and Set Date & Time.
Try resetting network settings.
Tap Settings / General / Reset / Reset Network Settings.
Sometimes just resetting the iPad can help with a time issue. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
Carolyn
Message was edited by: Carolyn Samit

Router time setting

right now, my time setting (under status, router) reads "not available". It used to show the date and time, but I had to power reset the router. How do I get the router to recapture the date and time? I need this to engage the access restrictions policy.

On most Linksys routers, you can only set the time zone. Then connect the router to the Internet, and it will pick up the correct time automatically.
If you need more help, please state your router model and version.
Message Edited by toomanydonuts on 04-28-200710:34 PM

Problems with the time setting. help please

i have the time set on my ipod touch by the city i live. the time will be right for a couple days, but then it becomes an hour behind. how does that happen or how can i make that not happen?
can anyone please help me?

I'm having same problem too. Has happened 3-4 times now. Can't figure out what causes the time to change to random time. At one point I thought it was caused by my leaving my calendar at a previous date or appointment, but really don't think so. I have a Verizon - iphone 5. I would think that the time would come from Verizon. Not Apple. But no one else is talking about it. Anyway, you're not alone )c: Turning it off and then back on is fine HOWEVER, last night it changed time to 2 or 3 hours EARLIER so my alarms were screwed up! I asked Siri "what time is it" and she must get her information from the iphone settings. So... she gave me the WRONG time also. Sad. 1st time it happened, it was actually Sunday 8:03 AM PST and iphone showed 11:38PM. This morning, not only was the time wrong, the date was last Tuesday, 9/26/12! Not funny when we all depend on our calendars and appointments that are set on each day. Other times, I just reset it and will wait for someone to fix the problem. I love the iphone 5 though! Nice and light (I'm a runner). It replaced a 4. Loved that one too, but new iOS6 is WAY FASTER! Love it to pieces!

IPhone 5 time setting change automatically

i have iPhone 5 my time setting change all the time and the network cut and back gain what the problem ? how i can repair it

Vzw does not control the voice mail system for iPhones, apple does . Voice your complaint to them

I can't find Iphone cellular calls in my face time setting.

I can't find Iphone cellular calls in my face time setting. It happened all of a sudden(when I did something, I don't remember what it was). I cant make or pick audio calls on my mac anymore. Please, let me know how to solve this.

Hi there Akashvijayaraj,
It seems like you might be having an issue with one of the features of Continuity in Yosemite and iOS 8. I have an article for you that should be able to help you address this issue:
Get help using Continuity with iOS 8 and OS X Yosemite
http://support.apple.com/kb/TS5458
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

2nd gen ipod touch date&time setting error

when i try to upgrade apps from app store, it says cannot connect to the store.
a secure connection could not be established. please check date&time setting.
what should i do?

Head to Settings -> General -> Date & Time, and make sure the Time is set correctly or the Set Automatically option is set to On.
B-rock

Display for: timer sets itself, no matter what

I was prompted to download an update to Captivate today. So,
I did. Now I am having problems overriding the "Display for:"
timer. It keeps setting itself, I need to override it to something
less than what it thinks it needs. Is there a way to turn this off.
I was not having this problem until I downloaded the update...so,
I'm frustrated.
What am I doing: I want to create a slide, and the user can
click/not click on the correct area. If not a failure message pops
up for 0.2 secs. Then, I advance to the next slide and I display a
text box with the same error message and add some animation.
However, I am having a hard time gettng the Display for: timer set
to 0.2, it keeps setting itself to 4 or 5 seconds. Is anyone else
having this issue? Are you able to get around it. Otherwise, I'll
have to try to remove the update.

Capti8r,
I don't know if that was the issue or not. (I wound up
restoring my system because I wasn't able to be productive).
However, here is what I know, I NEVER unchecked that option to
begin with. What was happening was that I would go to the Options
page and manually type my change in the Display For: field. Then,
I'd hit Apply, and it would change the time to what it calculated
and not keep my manual changes. I would expect that no matter what,
if I made a manual change, then it should keep it. Unless the new
version enforced that option differently. But, why would they do
that...

Solaris Time setting

Similar Messages

Maybe you are looking for