Solaris unable to reboot

Hi brother,
We have Solaris 10 in T2000 which unable to reboot after apply BSM, how can I fix it? both reboot and shutdown command is no response. I need to use poweroff the shutdown the server. Pls help

you need to ask Oracle to support.

Similar Messages

  • Solaris Branded Zones, Unable to reboot/Halt

    Hi People,
    Hoping someone can help. Im running Solaris 10 on a Sun Workstation Ultra 45. I have two disks. One disk has the default install of solaris 10 all updated to the latest patches.The second disk is mounted as /zones and holds each of the zones on ZFS. I have then downloaded and installed successfully Solaris 8 and Solaris 9 and Solaris 10 zones. So I have 3 zones.
    The problem I am facing is I can boot up all 3 zones fine and they work great, however when I halt or reboot either Solaris 8 or solaris 9, they never come back up. I try and zlogin to them and telnet and ssh and they are totally unresponsive and quite literally dont boot. I have tried to pkill -9 -z zonename ; umount /zonesfilesystem; zpool clear and even rebooted the Global zone. Still will not come up. The only way they will boot after being shutdown is if i shutdown the global zones and turn the server off and back on.
    Solaris 10 Zone boots up and down fine with no isses. I have tried this on both UFS and ZFS thinking it might be a file lock issue. Still unable to reboot or halt a zone and bring it back up.
    Any help please :)
    Thanks in advance.

    When they are unable to come back up, what does 'zoneadm list -cv' say? If the state of the zone is "down" or "shutting_down", you can probably benefit from the fix for:
    7038404 outstanding zone references should not cause zone_destroy(2) to hang
    This is available in 147440-05 (sparc) / 147441-05 (x86) or later.

  • HT1414 Could someone plizzzz tell me...I have an iphone4  32G, the problem is a complete black screen I'm unable to reboot it doesn't get picked up by itunes Pc,  direct wall socket charging nothing it is got me.. i have tried everything to no avail.

    I have an iphone4  32G, the problem is a complete black screen, I'm unable to reboot it doesn't get picked up by itunes Pc,  direct wall socket charging nothing happens so it is got me beat?.. i have tried everything but no hope, Has anyone else had this problem? is there a solution, besides having to pay $199 for hardware replacemente... thank you to anyone with info...

    bellaluna59 wrote:
    So let me get this straight if I pay them [Apple Store] $149
    they  will replace my device? Is that correct?
    Assuming it is in one piece and otherwise meets the conditions for an Out of Warranty replacement, yes.
    Conditions are:
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications.  However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.

  • HT200197 I am unable to reboot my apple tv.

    Hello.  I am unable to reboot my apple tv and the light continues to blink.  I have tried both processes listed online.  What else can I try?

    Have you tried a restore?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • My 4s hangs after ios 7 update and unable to reboot

    Hi All,
    My 4s hangs after ios7 update and am unable to reboot. I am unable to make calls also. Please help.
    Thank you.
    whyeboon

    My iPhone 5 freezes all the time, can you please help me?

  • Unable to reboot my laptop through Windows XP

    system information: Lenovo 3000 N100
    i am unable to reboot to Windows XP.  
    problem started when i wanted to  set my laptop to factory setting. the only disc i had created was Recue and Recovery Start up disk. 
    whenever i boot the system it takes me to Think Vantage Rescue and Recovery 3. with the message
     "if you have a Product REcovery Supplemental Disc please insert it into drive D now and press yes otherwise press no"
    when press no there is another message "insert Product Recovery Disc 1 into drive D"
    what should i do to start the window normal.  i do not want to go with factory setting since i do not have appropriate.
    much appreciated your help.
    regards,
    agnel

    hey gladagnel,
    if you press the F8 / F12 key; do you get the list where you can choose to load into windows via safe mode and such ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Nokia 822 error unable to reboot message to press any key to shut phone down.

    Windows Phone error unable to reboot message to press any key to shut phone down. No screen available to press, help.

        Thats definitely not good, respond. We are here to help get your phone working again. Have you tried a forced reboot by chance? Please hold down the Power keys for about 10 seconds. Do you recall anything that may have been processing when this occurred? Any new updates prior?

  • Curve 8520 os: 5.0.0.681 randomly crashing and only shows white screen and unable to reboot unless plugged in

    Anyone else suffering from their curve 8520 os: 5.0.0.681 randomly crashing and only showing a white screen as well as it being unable to reboot unless it is plugged in? It often occurs when I'm playing media, using apps and maps. Had the same problem with my previous phone so it was sent in for repair and replaced but I'm still suffering from the same problem with the replacement handset! Any ideas how it fix this?
    Thanks

    Hello Me_Again
    Welcome to BlackBerry Support Community Forums
    Since you got a replacement it the same old Battery you are using or its a new Battery  with your replacement device.Sometime this white Screen or unable to reboot happen because of weak battery .I suggest if you can arrange a good quality Battery then try running your device a few hours to see if the problem is within the device or its just Battery issue.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Unable to reboot after installing Leopard

    Unable to reboot, the fan keep on noising after the screen turns off for a long time, and the fan noise just keep on getting louder, and the computer did not start up again. This problem only happens after installing the Leopard.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

    Hello,
    I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
    Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
    Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
    At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
    System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
    Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
    I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
    It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
    How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
    Your help is sincerely appreciated. Thanks.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Init 0 or shutdown -i0 on solaris 8 automatically reboots

    I have a solaris 8 server and when I issue init 0 or shutdown -i0 it automatically reboots. I was able to issue init 5 and it shutdown/power down, but not init 0.
    I looked at inittab and it shows
    s0:0:wait:/sbin/rc0 >/dev/msglog 2<>/dev/msglog </dev/console
    Any suggestions?
    thanks

    Hi
    Thank you. I have 2 SunFire v440s. Both have auto-boot?true and I only have this problem with one of them. I was able to issue init 5 and the server shut down, but both init 0 or shutdown -i0 rebooted.
    Unfortunately the server with the problem is remote so I can't do allot of testing with it.
    Thank you for your suggestions.

  • Solaris hangs after reboot on HP DL160

    Hi,
    my HP DL160 runs fine with Solaris 10, but you can't do a soft reboot, because it won't boot Solaris after that (hangs after loading kernel). I think it's because of a ATA Bug, but nothing has helped to solve the problem (done the ata-revert-to-defaults=0...etc.).
    Can someone please help me?
    Bye

    can you please help by guiding us what really need to be done? i have the same problem on the same model of machine. tq

  • Solaris hangs after reboot on HP DL160 G5

    Hi,
    my HP DL160 runs fine with Solaris 10, but you can't do a soft reboot, because it won't boot Solaris after that (hangs after loading kernel). I think it's because of a ATA Bug, but nothing has helped to solve the problem (done the ata-revert-to-defaults=0...etc.).
    Can someone please help me?
    Bye

    can you please help by guiding us what really need to be done? i have the same problem on the same model of machine. tq

  • Smartwatch 3 - Frozen for several hours and unable to reboot

    I have just had an uncomfortably close shave with my new Smartwatch SWR50...!
    I've had it for 3 weeks (Yes, a Christmas present) and during that time I have had 2 or 3 episodes where it has hung (stops responding and time display is frozen), On these occasions I have always been able to reboot with the power button. Today however it again froze, but this time I was completely unable to reset it - holding the power button down (for ages) had no effect whatsoever. After several hours the frozen screen disappeared (battery gone flat perhaps, but given state of charge should have lasted 2 days more), at which point it responded when plugged into a laptop/charger by showing that I had a flat battery. Some minutes later it powered on again normally.
    I am suspicious about the watch face I have been using - it is the 'Speeds Pro' which I find almost ideal, but I am now wondering if it could be this that causes the freezes? On previous occasions when I have rebooted from frozen state it has shown: 'Unfortunately Speeds Pro has stopped responding'. I have now reverted to the basic Sony analogue offering to hopefully get some stability, but really it is too basic for my tastes!
    Has anyone else experienced anything similar – can a watch face cause a total system crash/freeze? Is there any other way of doing a reset in such circumstances?
    Thanks!
    Phone is LG G3 [Android 5.0] running Android Wear 1.0.5.1630507

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Sorry to hear that you're having issues with your Smartwatch 3.
    Hard to say what causes this but an app that's not working properly may cause the watch to freeze so that you need to force a restart/shutdown.
    But it's a bit strange that you were unable to force a shutdown by holding the on/off button.That should have worked. If you hold it for a while it should vibrate 3 times and power off. If the issue remains, could you try updating the watch using PC Companion and see if that helps?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • JMF in Solaris - Unable to handle format

    Hi
    I ran the sample codes AVTransmit2 and AVRecive2 in Windows and it worked great. However, when I ran it in Solaris, I got the following error.
    Unable to handle format: mpegaudio/rtp, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
    Failed to prefetch: com.sun.media.PlaybackEngine@9ff0a8
    Error: Unable to prefetch com.sun.meida.PlaybackEngine@9ff0a8
    AVReceive2 internal error: javax.media.ResourceUnavailableEvent[source=com.sun.media.content.unknown.Handler@738d08, message=Failed to prefetch: cannot open the audio device]
    WARNING: XIL OBSOLESCENCE
    This application uses the Solaris XIL interface which has been declared obsolete and may not be present in versions of Solaris beyond Solaris 9. Please notify your application applier.
    Anyone has any idea on why it went wrong?
    Thanks,

    I doubt the convertion to stereo or to big endian will have any effect, because...
    AVReceive2 internal error: javax.media.ResourceUnavailableEvent[source=com.sun.media.content.unknown.Handler@738d08, message=Failed to prefetch: cannot open the audio device]That message is telling you that JMF has failed while trying to get permission to obtain the audio device...IE, your sound card. You probably need to run as root, if you're not...

Maybe you are looking for