Solaris V240 and StorEdge Multipack

I have an issue with a Solaris V240.
Is it possible connect a Multipack StorEdge 599-2061-01 on external scsi port of this Server?
I have tryed the connection but on boot I have an error:
Testing /pci@1c,600000/scsi@2,1
ERROR : All register test failed
SUMMARY : Obs=0x00000000 Exp=0x00001000 XOR=0x00001000 AND-Mask=0x78c2749b Addr=0xfedc0000
DEVICE : /pci@1c,600000/scsi@2,1
SUBTEST : selftest:scsi-reg-test
MACHINE : Sun Fire V240
SERIAL# : 66969949
DATE : 08/27/2010 15:38:01 GMT
CONTR0LS: diag-level=max test-args=
Error: /pci@1c,600000/scsi@2,1 selftest failed, return code = 1
Testing /pci@1e,600000/isa@7/serial@0,2e8
I have used a cable DEL partnumber 1H181 HD68 to VHDCI
Could you please help me?
Thanks.
Edited by: mautig on Aug 31, 2010 1:34 PM

I'ld believe that it should work, if the KVM switch was on and the Sun server selected when the Sun server was powered on, but thats my guess..

Similar Messages

Solaris 9 and Storedge C2

Hello,
i have a V240 Server witch an library Storedge C2 attached. I receive this entries in the /var/adm/messages:
Jan 14 06:30:21 BCKMAL genunix: [ID 408822 kern.info] NOTICE: glm1: fault detected in device; service still available
Jan 14 06:30:21 BCKMAL genunix: [ID 611667 kern.info] NOTICE: glm1: got SCSI bus reset
Jan 14 06:30:36 BCKMAL scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2,1 (glm1):
Jan 14 06:30:36 BCKMAL SCSI bus parity error - illegal phase

Hi,
I have a Sun V240 and a C2 running under Solaris 10 without any problem.
Now this does not help you, but I Had an L20 before I got the C2 and at some point in time
had similar problems like you have.
Sun replaced the HBA to no avail, drive in the L20 was replaced and all firmware updated (drive + robot). That fixed it.
In the end it was probably some firmware problem.
So in your case it could still be anything i am afraid.
Regards,
Nico

Solaris v240 and PS2 KVM switch

hi,
i am trying to connect Sun v240 servers that have USB for keyboard and mouse to a USB KVM. However this KVM accepts input from PS2 keyboard/mouse. So the KVM accepts PS2 input and the output is USB to the servers.
the KVM works for MS Windows servers with similiar setup, however v240 servers do not. There was no response as if the keyboard/mouse are not installed.
any clue for this?
thanks in advance for your help.

I'ld believe that it should work, if the KVM switch was on and the Sun server selected when the Sun server was powered on, but thats my guess..

SPARC v240 can i install Solaris 10 and free Radius proxy software?

On a SPARC v240 can i install Solaris 10 and free Radius proxy software?

No, the patch was created on top of Solaris 10 packages. The patchadd utility requires that the VERSION strings match between the installed package's pkginfo file and the pkginfo files inside the patch. Unless the base package did not change between Solaris 9 and Solaris 10, the patch will not get applied because of the VERSION mismatch. But it is very unlikely that the packages did not change between the two releases.
Even if you were to be able to install it, there could be dependencies that the patch's binaries have on other Solaris 10 binaries.
-- Alan

Solaris10 on V240 and RAID System Transtec Provigo 410

Hi,
does anybody have a clue how i can install the external raidsystem Provigo 410 from transtec into solaris 10?
I connected it via fc and iscsi with a V240 and get the messages in the format :
FC:
1. c3t230000A0D1E171F8d0 <drive type unknown>
/pci@1f,700000/pci@0/fibre-channel@2/fp@0,0/ssd@w230000a0d1e171f8,0
ISCSI:
1. c3t6d0 <drive type unknown>
/iscsi/[email protected]%3A01.00a0d1e1720604D2,2
The controller of this raid is a Rasiliant, Typ RAS-6000.
The raid runs perfect with Win2k3 and linux and the vendor told me to ask Sun to get it started ...
Can anyone please please help me?

Hmm.
no need to search anymore. Verndor told me, that Solaris 10 is not supported with this raid ... shame on them :-)

I'm new to Solaris 10 and need help to setup ftp server

hello!
I just installed Solaris 10 and I'm trying to setup an ftp server (with ftpd) but I don't know how to do that
my server doesn't need any security or authentication
I'm looking for the default shared files directory
Also wondering what to change in what configuration file...
This OS looks quite similar to some linux I used before but the differencies are big enough to drive me crazy
anyway thanks for your help.
Any advice is welcome :-)

cd /etc/ftpd
vi ftpusers
put a # in front of root and any other users that you wish to be able to ftp
then svcadm restart ftp
If you want to set up an anonymous ftp server, there is a little more involvement

How to find out the version of the SFK that is installed on Solaris 9 and 8

On Solaris 8 and 9, I would I like to find out the version of the SFK and the leadville driver that is installed.
Is it possible to find out this information ? Thanks.

DatabaseMetaData.getDriverVersion()
http://java.sun.com/j2se/1.4.2/docs/api/java/sql/DatabaseMetaData.html#getDriverVersion()

Error on install of 125136-18 and 125137-18 on jdk-6u16 on Solaris 9 and 10

We have jdk-6u16 installed on Solaris 9/10 (sparc and sparcv9). When trying to install the patches to update to 6u17 (125136-18 and 125137-18) the patches error with the following below, and leave SUNWj6cfg and SUNWj6rtx in I-Lock status.
Any suggestions?
# patchadd 125136-18
Checking installed patches...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Pkgadd failed. See /var/tmp/125136-18.log.5887 for details
Patchadd is terminating.
# cat 125136-18.log.5887
/var/sadm/pkg/SUNWj6cfg/install/postinstall: /var/tmp/125136-18.SUNWj6cfg: does not exist
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWj6cfg> failed.

On Solaris 9, its state is either cpu0 or cpu1,
depending on the time I call 'top'. Does that mean
it is actually running on either cpu0 or cpu1?Should be.
What
is the difference between the 'cpu0' state and the
'run' state?A thread can be sleeping (it doesn't have anything to do), or runnable. Although it's runnable, it doesn't mean that it's running right at that instant.
Note that it's difficult to get a good view of the situation with 'top' (or almost any other program). Because whenever 'top' looks, 'top' will always be running, even though it's only running a fraction of the time.
And does it mean all 4 threads are
running/assigned to cpu0 (or cpu1)? No. Each thread is independently executed. But since you only have 2 processors, and since 'top' has to be running when it runs, you'll only ever see your process on at most one other cpu.
You might want to use 'prstat' and 'prstat -L'. The first shows one line per process, the second one line per thread.
On Solaris 10, the state shows 'cpu'. Does it mean
it is running? And does it mean that each thread may
run on a different CPU therefore the state does not
show any particular CPU number? Is it correct that
Solaris 9 assign the CPU on a per-process basis and
Solaris 10 on a per-thread basis?I don't know exactly what top does or doesn't do. You might try 'prstat' instead.
There is no difference at this level between Solaris 9 and 10. All will schedule on a per-thread basis.
Darren

How do I install dual-boot Solaris 8 and Solaris 9 on one hard disk ?

I tried to install Solaris 8 and Solaris 9 on same disk using CDs, but
the second installation overwrote the first Solaris which was installed
previoudly on the half-disk size partition of same disk.
How do I install two Solarises on one hard disk ?
Thanks
Yakov

There are no tricks to get Solaris to dual boot on the same drive. Just allocate and pick the free slices not used by the first Solaris install when you put in the second install. Technically speaking there is nothing preventing you from running seven separately bootable Solaris instances on the same drive (one of 8 available slices is overlap -- slice 2) provided you use a swap file on a root partition instead of reserving a whole slice for swap.

Sapinst not started for PI 7.1 on Solaris 1064bit and Oracle10

Hello,
We are running NW 7.10 PI 7.1 installation on Sun Solaris 10 and Oracle 10.2.0.4 platform. We are using the following installation DVDs for installing PI.
Installation Master = 51033240_21
Java Component = 51033242
UC Kernel = 51033245
We are doing following to run ./sapinst
1. log on as root
2. set JAVA_HOME, TEMP and DISPLAY
3. go to master DVD and run ./sapinst
The instgui is not showing any error Problematicc sentence structure ./SAPinst is just getting frozen. We used another script ./sapinstgui from the same directory and it shows us some logon screen with port 21212 in the GUI. However, when we try clicking logon it does nothing.
We've ensured that port 21212 or any other port that supposed to be used by SAPinst are not blocked on the firewall or not used by any other application. Host and DNSfiles are also okay. Based on one of the previous forum /etc/nss*.conf files also exist in our PI host. Not sure why the SAPinst GUI is not started.
We've also ensured that we need any new SAPinst support pach from marketplace, however current installation master dvd is the latest one release in March 09 and there are no further patches released by SAP.
Please help if anyone of you have faced this issue before.
Harshal

I tried ./sapinst SAPINST_DIALOG_PORT=<free_port_number> as well as the default port number. Both of them fails.
normally ./sapinst itself should establish all the port automatically that it uses. Which currently is not happening.
Do you want me to copy installation master dvd for Solaris on windows work station from where i'm initiating it through Xmanager session and try running ? The installation master dvd that i'm currenty using is for Solaris platform which meanase ./sapinst is compiled for Solaris, how will it be supported by Windows ?
Harshal

Need Pre_requisites to install Solution Manager in Solaries 9 and Oracle 10

Hi Administrators,
In my project, we have planned to implement Solution Manager 7.0 in O/S Solaries 9 and Database Oracle 10.2.
We are implementing this Solution Manager in already existing SAP server.
We have server like TSAPNGN, In this server already our QAS ECC 5.0 and QAS BW 3.5 are exist and running in this server.
I need information like, What is the pre_requisites to install SAP application, where already another SAP exist in Server.
Appreciate ur help.
Thanks & Regards,
Jagan.

Hello
There is no difference whether you are installing the Solution Manager on a separate server or an existing server already containing the DEV system. you will get some idea from these Notes
21960 Several instances/systems on one UNIX computer
28392 Two R/3 Systems on one Windows NT Server
322653 DB6: Two or several systems on a host
I think, you should go for Central System installtion for the Solman, with it's own database.
and what do you mean by 'standalone solman' here ?
Just go 'installation and upgrades' -> My application components -> SAP Solution Manager -> Solman 7.0 or EHp1 -> Installation and upgrades
For installation guide
installation and upgrade guiedes -> SAP components -> SAP Solution manager -> Select solman version

Compiler directives to differetiate between solaris 9 and solaris 10

i have an API which makes certain function calls which are different for solaris 9 and solaris 10. i cannot add my own defines, since that would mean that applications too would have to define them.
does the Sun Workshop compiler provide any default directives to differentiate between solaris 9 and solaris 10? something like #ifdef __SunOS_5.10 or something like that?
thanks.

As explained in the C Users Guide, the compiler predefines several macros, one of which is represents the Solaris version number.
The macro name is derived from the output of the commands
uname -s and uname -r, starting with __, connected by _, and with dots replaced by _.
Running on Solaris 9:
% uname -s
SunOS
% uname -r
5.9
The defined macro name is __SunOS_5_9
On Solaris 10 you get __SunOS_5_10
__SunOS_5_9

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Are there differences between Solaris 8 and Solaris 2.6 in the way web pages are displayed for Chinese and Korean text using UTF-8 settings?

A user is running a web application on Solaris Release 2.6 with UTF-8. After the server was updated to Solaris 8, the application is experiencing problems with webpages containing Korean and Chinese text. The encoding is UTF-8. Has anyone experienced this problem? I checked the packages installed on Solaris 8 and they are consistent with what was installed on Solaris 2.6. Could this possibly be a patch-level problem? Thank you.

Hi,
It could be a problem with the necessary patche updation. refer the following FTP site for the Solaris pathces.
connect through the FTP cleint to sunsolve.sun.com
/pub/patches directory contains a lot of patches for solaris.
Find and install the corresponding patch require to solve your problem.

SSH Differences between Solaris 9 and Solaris 10

I use public key authentication when connecting via SSH but have noticed a difference between Solaris 9 and Solaris 10 and wondered if it's an environment setup issue. I keep my keys in $HOME/.ssh
When connecting from Solaris 9 I can provide an identity file without a path regardless of the directory that I'm in e.g.
ssh -i my_identity_file user@hostnameThe above works even if I'm not in the $HOME/.ssh directory. But when using the same from Solaris 10 I get the following error:
Warning: Identity file my_identity_file does not exist.If I run the command from $HOME/.ssh on Solaris 10 it connects fine, and if I pass in the path like so it works fine:
ssh -i $HOME/.ssh/my_identity_file user@hostnameIs there a setting specific to SSH somewhere as I can't see anything in my environment that's different between the two systems. There's certainly no entry in $PATH that points to $HOME/.ssh. How could I get SSH to work on Solaris 10 by just providing the identity file name and not the full path
Regards
Rich

It's not explicitly defined in /etc/ssh/ssh_config, so I'm assuming it would be using the default which is ~/.ssh/id_dsa.
But surely that's irrelevant if I'm using the -i switch to provide the identity file?
Remember the problem here is that I have to provide a full path to the identity file, whereas before just the filename would do.
Rich

Solaris V240 and StorEdge Multipack

Similar Messages

Maybe you are looking for