Solaris Weblogic 8.1 Server - starting Weblogic as non-root user

Hello,
Currently we are starting weblogic 8.1 server as the root user, but would like to start as a non-root user.
(our unix team isn't too happy giving us, the dev team the root password!).
Is it possible to start Weblogic 8.1 on Solaris 8 without the root password?...If so, can you point me, where I can find more information in the documentation, please.
thanx,
Vishwa

If you have managed to boot the server before in the past you should have a config.xml.booted file in your domain. Try using this to boot, if it works you can diff it with your possibly mashed config.xml to see what went wrong.

Similar Messages

Cannot start X11 as non-root user

Yes I know, there are about a billion threads about this issue, but I'm afraid none of them have helped me so far.
So, basically as root I can startx just fine. But when I try to startx as my user "hb", I see the Nvidia logo and it jumps back to the console. It doesn't display any real errors, apart from some font and keyboard stuff, which isn't fatal to starting the X server as far as I know. The Xorg.0.log doesn't display any errors at all. So I really don't have a clue what the problem is.
I've installed Arch Linux just a week ago on this laptop and I didn't have any problems whatsoever, but I've tried to reinstall 3 times today and X11 keeps refusing to work...
I've used nvidia-xconfig to configure xorg.conf and I followed the wiki instructions (which worked for me the last time). But considering X11 works for root, the config file should be okay, right?
Last edited by HyperBaton (2008-02-03 12:50:11)

I don't have a window manager installed yet. Seemed rather pointless when X wasn't working yet. The .xinitrc is there, but doesn't exec anything. But in the previous install I installed xfce4 and had .xinitrc do "exec xfce4-session", and the result was the same as now: X starts then jumps back to console.

[SOLVED] Xorg not starting on non-root user [My First Linux]

Hello, I recently turned back to linux after digging up my old ASUS EEE 900a, which I messed up with partitioning fun after trying to cram Windows XP on it and etc. Anyways, I managed to fix it, and after Ubuntu being too big, I was turned on to Arch as a good distro, and I've been having a very good time setting everything up so far.
Anyways: My issue arises after needing to use a different user in order to use Chrome. I created a new account and tried to run startx like I usually do. It spat out the usual few lines, but failed and gave me this log:
[ 4616.974]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4616.974] X Protocol Version 11, Revision 0
[ 4616.974] Build Operating System: Linux 3.8.7-1-ARCH i686
[ 4616.974] Current Operating System: Linux archieee 3.9.4-1-ARCH #1 SMP PREEMPT Sun May 26 11:56:48 CEST 2013 i686
[ 4616.975] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 4616.975] Build Date: 17 April 2013 02:43:06PM
[ 4616.975]
[ 4616.975] Current version of pixman: 0.30.0
[ 4616.975] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4616.975] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4616.977] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 4 21:56:02 2013
[ 4616.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4616.978] (==) No Layout section. Using the first Screen section.
[ 4616.978] (==) No screen section available. Using defaults.
[ 4616.978] (**) |-->Screen "Default Screen Section" (0)
[ 4616.978] (**) | |-->Monitor "<default monitor>"
[ 4616.978] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4616.978] (==) Automatically adding devices
[ 4616.978] (==) Automatically enabling devices
[ 4616.978] (==) Automatically adding GPU devices
[ 4616.978] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4616.978] Entry deleted from font path.
[ 4616.978] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4616.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4616.979] Entry deleted from font path.
[ 4616.979] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4616.979] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 4616.979] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4616.979] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4616.979] (II) Loader magic: 0x8258620
[ 4616.979] (II) Module ABI versions:
[ 4616.979] X.Org ANSI C Emulation: 0.4
[ 4616.979] X.Org Video Driver: 14.1
[ 4616.979] X.Org XInput driver : 19.1
[ 4616.979] X.Org Server Extension : 7.0
[ 4616.980] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4616.983] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 rev 3, Mem @ 0xf3e00000/524288, 0xd0000000/268435456, 0xf3dc0000/262144, I/O @ 0x0000cc00/8
[ 4616.983] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 rev 3, Mem @ 0xf3e80000/524288
[ 4616.983] Initializing built-in extension Generic Event Extension
[ 4616.983] Initializing built-in extension SHAPE
[ 4616.984] Initializing built-in extension MIT-SHM
[ 4616.984] Initializing built-in extension XInputExtension
[ 4616.984] Initializing built-in extension XTEST
[ 4616.984] Initializing built-in extension BIG-REQUESTS
[ 4616.984] Initializing built-in extension SYNC
[ 4616.984] Initializing built-in extension XKEYBOARD
[ 4616.984] Initializing built-in extension XC-MISC
[ 4616.985] Initializing built-in extension SECURITY
[ 4616.985] Initializing built-in extension XINERAMA
[ 4616.987] Initializing built-in extension XFIXES
[ 4616.990] Initializing built-in extension RENDER
[ 4616.993] Initializing built-in extension RANDR
[ 4616.995] Initializing built-in extension COMPOSITE
[ 4616.998] Initializing built-in extension DAMAGE
[ 4617.000] Initializing built-in extension MIT-SCREEN-SAVER
[ 4617.003] Initializing built-in extension DOUBLE-BUFFER
[ 4617.005] Initializing built-in extension RECORD
[ 4617.007] Initializing built-in extension DPMS
[ 4617.010] Initializing built-in extension X-Resource
[ 4617.012] Initializing built-in extension XVideo
[ 4617.015] Initializing built-in extension XVideo-MotionCompensation
[ 4617.017] Initializing built-in extension XFree86-VidModeExtension
[ 4617.019] Initializing built-in extension XFree86-DGA
[ 4617.021] Initializing built-in extension XFree86-DRI
[ 4617.023] Initializing built-in extension DRI2
[ 4617.023] (II) LoadModule: "glx"
[ 4617.024] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4617.024] (II) Module glx: vendor="X.Org Foundation"
[ 4617.024] compiled for 1.14.1, module version = 1.0.0
[ 4617.024] ABI class: X.Org Server Extension, version 7.0
[ 4617.024] (==) AIGLX enabled
[ 4617.026] Loading extension GLX
[ 4617.026] (==) Matched intel as autoconfigured driver 0
[ 4617.026] (==) Matched intel as autoconfigured driver 1
[ 4617.026] (==) Matched vesa as autoconfigured driver 2
[ 4617.026] (==) Matched modesetting as autoconfigured driver 3
[ 4617.026] (==) Matched fbdev as autoconfigured driver 4
[ 4617.026] (==) Assigned the driver to the xf86ConfigLayout
[ 4617.026] (II) LoadModule: "intel"
[ 4617.026] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4617.027] (II) Module intel: vendor="X.Org Foundation"
[ 4617.027] compiled for 1.14.1, module version = 2.21.8
[ 4617.027] Module class: X.Org Video Driver
[ 4617.027] ABI class: X.Org Video Driver, version 14.1
[ 4617.027] (II) LoadModule: "vesa"
[ 4617.027] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4617.028] (II) Module vesa: vendor="X.Org Foundation"
[ 4617.028] compiled for 1.14.0, module version = 2.3.2
[ 4617.028] Module class: X.Org Video Driver
[ 4617.028] ABI class: X.Org Video Driver, version 14.1
[ 4617.028] (II) LoadModule: "modesetting"
[ 4617.029] (WW) Warning, couldn't open module modesetting
[ 4617.029] (II) UnloadModule: "modesetting"
[ 4617.029] (II) Unloading modesetting
[ 4617.029] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4617.029] (II) LoadModule: "fbdev"
[ 4617.029] (WW) Warning, couldn't open module fbdev
[ 4617.029] (II) UnloadModule: "fbdev"
[ 4617.030] (II) Unloading fbdev
[ 4617.030] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4617.030] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT3), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT3), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2),
Haswell SDV Desktop (GT3), Haswell SDV Mobile (GT1),
Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT3),
Haswell SDV Server (GT1), Haswell SDV Server (GT2),
Haswell SDV Server (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell ULT Desktop (GT1),
Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT3),
Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2),
Haswell ULT Mobile (GT3), Haswell ULT Server (GT1),
Haswell ULT Server (GT2), Haswell ULT Server (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2),
Haswell CRW Desktop (GT3), Haswell CRW Mobile (GT1),
Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT3),
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Haswell CRW Server (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), ValleyView PO board
[ 4617.032] (II) VESA: driver for VESA chipsets: vesa
[ 4617.032] (++) using VT number 1
[ 4617.033] (WW) Falling back to old probe method for vesa
[ 4617.033] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4617.034] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4617.034] (==) intel(0): RGB weight 888
[ 4617.034] (==) intel(0): Default visual is TrueColor
[ 4617.034] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 4617.034] (**) intel(0): Relaxed fencing disabled
[ 4617.034] (**) intel(0): Wait on SwapBuffers? enabled
[ 4617.034] (**) intel(0): Triple buffering? enabled
[ 4617.034] (**) intel(0): Framebuffer tiled
[ 4617.034] (**) intel(0): Pixmaps tiled
[ 4617.034] (**) intel(0): 3D buffers tiled
[ 4617.034] (**) intel(0): SwapBuffers wait enabled
[ 4617.034] (==) intel(0): video overlay key set to 0x101fe
[ 4617.034] (II) intel(0): Output LVDS1 has no monitor section
[ 4617.035] (--) intel(0): found backlight control interface /sys/class/backlight/eeepc
[ 4617.066] (II) intel(0): Output VGA1 has no monitor section
[ 4617.067] (II) intel(0): EDID for output LVDS1
[ 4617.067] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Printing probed modes for output LVDS1
[ 4617.068] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz P)
[ 4617.068] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4617.068] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4617.068] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4617.100] (II) intel(0): EDID for output VGA1
[ 4617.100] (II) intel(0): Output LVDS1 connected
[ 4617.100] (II) intel(0): Output VGA1 disconnected
[ 4617.100] (II) intel(0): Using exact sizes for initial modes
[ 4617.100] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 4617.100] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4617.100] (II) intel(0): Kernel page flipping support detected, enabling
[ 4617.100] (==) intel(0): DPI set to (96, 96)
[ 4617.100] (II) Loading sub module "fb"
[ 4617.100] (II) LoadModule: "fb"
[ 4617.101] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4617.102] (II) Module fb: vendor="X.Org Foundation"
[ 4617.103] compiled for 1.14.1, module version = 1.0.0
[ 4617.103] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4617.103] (II) Loading sub module "dri2"
[ 4617.103] (II) LoadModule: "dri2"
[ 4617.103] (II) Module "dri2" already built-in
[ 4617.103] (II) UnloadModule: "vesa"
[ 4617.103] (II) Unloading vesa
[ 4617.103] (==) Depth 24 pixmap format is 32 bpp
[ 4617.104] (II) intel(0): [DRI2] Setup complete
[ 4617.104] (II) intel(0): [DRI2] DRI driver: i915
[ 4617.104] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 4617.104] (II) UXA(0): Driver registered support for the following operations:
[ 4617.104] (II) solid
[ 4617.104] (II) copy
[ 4617.104] (II) composite (RENDER acceleration)
[ 4617.104] (II) put_image
[ 4617.105] (II) get_image
[ 4617.105] (==) intel(0): Backing store disabled
[ 4617.105] (==) intel(0): Silken mouse enabled
[ 4617.105] (II) intel(0): Initializing HW Cursor
[ 4617.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4617.113] (==) intel(0): DPMS enabled
[ 4617.113] (==) intel(0): Intel XvMC decoder disabled
[ 4617.113] (II) intel(0): Set up textured video
[ 4617.113] (II) intel(0): Set up overlay video
[ 4617.113] (II) intel(0): direct rendering: DRI2 Enabled
[ 4617.113] (==) intel(0): hotplug detection: "enabled"
[ 4617.123] (--) RandR disabled
[ 4617.160] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4617.160] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4617.160] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4617.160] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4617.160] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4617.160] (II) AIGLX: Loaded and initialized i915
[ 4617.160] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4617.162] (II) intel(0): Setting screen physical size to 270 x 158
[ 4617.278] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4617.278] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.278] (II) LoadModule: "evdev"
[ 4617.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4617.279] (II) Module evdev: vendor="X.Org Foundation"
[ 4617.279] compiled for 1.14.0, module version = 2.8.0
[ 4617.279] Module class: X.Org XInput Driver
[ 4617.279] ABI class: X.Org XInput driver, version 19.1
[ 4617.279] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.279] (**) Power Button: always reports core events
[ 4617.279] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4617.279] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.279] (--) evdev: Power Button: Found keys
[ 4617.279] (II) evdev: Power Button: Configuring as keyboard
[ 4617.279] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4617.279] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4617.279] (**) Option "xkb_rules" "evdev"
[ 4617.280] (**) Option "xkb_model" "evdev"
[ 4617.280] (**) Option "xkb_layout" "us"
[ 4617.363] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 4617.363] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4617.363] (II) Using input driver 'evdev' for 'Video Bus'
[ 4617.363] (**) Video Bus: always reports core events
[ 4617.363] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 4617.363] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4617.364] (--) evdev: Video Bus: Found keys
[ 4617.364] (II) evdev: Video Bus: Configuring as keyboard
[ 4617.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[ 4617.364] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4617.364] (**) Option "xkb_rules" "evdev"
[ 4617.364] (**) Option "xkb_model" "evdev"
[ 4617.364] (**) Option "xkb_layout" "us"
[ 4617.365] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4617.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.365] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.366] (**) Power Button: always reports core events
[ 4617.366] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4617.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.366] (--) evdev: Power Button: Found keys
[ 4617.366] (II) evdev: Power Button: Configuring as keyboard
[ 4617.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 4617.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4617.366] (**) Option "xkb_rules" "evdev"
[ 4617.366] (**) Option "xkb_model" "evdev"
[ 4617.366] (**) Option "xkb_layout" "us"
[ 4617.368] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4617.368] (II) No input driver specified, ignoring this device.
[ 4617.368] (II) This device may have been added with another device file.
[ 4617.369] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4617.369] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4617.369] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4617.369] (**) Sleep Button: always reports core events
[ 4617.369] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4617.369] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4617.369] (--) evdev: Sleep Button: Found keys
[ 4617.369] (II) evdev: Sleep Button: Configuring as keyboard
[ 4617.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 4617.369] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4617.369] (**) Option "xkb_rules" "evdev"
[ 4617.369] (**) Option "xkb_model" "evdev"
[ 4617.369] (**) Option "xkb_layout" "us"
[ 4617.370] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4617.371] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.372] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.373] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event5)
[ 4617.373] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 4617.373] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[ 4617.373] (**) Asus EeePC extra buttons: always reports core events
[ 4617.373] (**) evdev: Asus EeePC extra buttons: Device: "/dev/input/event5"
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Vendor 0 Product 0
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Found keys
[ 4617.374] (II) evdev: Asus EeePC extra buttons: Configuring as keyboard
[ 4617.374] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input5/event5"
[ 4617.374] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD, id 10)
[ 4617.374] (**) Option "xkb_rules" "evdev"
[ 4617.374] (**) Option "xkb_model" "evdev"
[ 4617.374] (**) Option "xkb_layout" "us"
[ 4617.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4617.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4617.376] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4617.376] (**) AT Translated Set 2 keyboard: always reports core events
[ 4617.376] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4617.376] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4617.376] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4617.376] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 4617.376] (**) Option "xkb_rules" "evdev"
[ 4617.376] (**) Option "xkb_model" "evdev"
[ 4617.376] (**) Option "xkb_layout" "us"
[ 4617.378] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 4617.378] (II) LoadModule: "synaptics"
[ 4617.378] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4617.379] (II) Module synaptics: vendor="X.Org Foundation"
[ 4617.379] compiled for 1.14.1, module version = 1.7.1
[ 4617.379] Module class: X.Org XInput Driver
[ 4617.379] ABI class: X.Org XInput driver, version 19.1
[ 4617.379] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 4617.379] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.379] (**) Option "Device" "/dev/input/event10"
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 32 - 544 (res 0)
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 32 - 352 (res 0)
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report finger width.
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 255
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 15
[ 4617.380] (**) Option "TapButton1" "1"
[ 4617.380] (**) Option "TapButton2" "2"
[ 4617.380] (**) Option "TapButton3" "3"
[ 4617.381] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.381] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 4617.383] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.332
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 4617.384] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.385] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 4617.385] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4617.386] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 4617.386] (II) No input driver specified, ignoring this device.
[ 4617.386] (II) This device may have been added with another device file.
I've tried looking for this problem elsewhere as it feels like such a newbie problem to have, but I have had difficulty. There are two errors in this log, I think, but they didn't mean much to me... Any help for a linux newbie? Thanks!
EDIT: Solved; as pointed out below, I needed a window manager for a non-root user to use.
Last edited by DJMankiewicz (2013-06-05 07:30:06)

Well, soon you'll have to try out one of the more minimal options, in which you don't use any desktop environment but instead you install your own window manager (openbox, dwm, i3, etc) and use small, dedicated programs. Given your extreme space restrictions, I recommend going that route! But, take your time because that requires a bit of learning: you need to figure out which parts of a desktop environment you really need, then you need to learn the proper names for them so that you can search for information, then you need to start fiddling with configurations, etc. Better first to make sure your first Arch Linux installation is up and running properly and to learn a bit about the system before entering that downward spiral.

IdM 8.1: Problems to provision Solaris 10 with non root user.

Hello
When IdM 8.1 tries to create a user into Solaris 10 I got this Error:
com.waveset.util.WavesetException: An error occurred adding user 'testSolaris' to resource 'Test_Solaris'. com.waveset.util.WavesetException: Script failed waiting for "_,)#(:" in response "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request en...roblem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly " com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly ".+
*The non root user has the privileges that describes the IdM documentation. This error doesn't occure when the connection user is root.*
*What's wrong?*

The non - root doesn't work yet. I try to use a user with SUDO = TRUE but I got this error when I Test the connection:
Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "++_,)#+(:".+
I haver already configured the parameter tty_tickets to TRUE and the sudoers file as following:
+# sudoers file.+
+#+
+# This file MUST be edited with the 'visudo' command as root.+
+#+
+# See the sudoers man page for the details on how to write a sudoers file.+
+#+
++Defaults syslog=auth+
Defaults:idm_sudo tty_tickets
root ALL=(ALL) ALL
idm_sudo ALL = NOPASSWD: /usr/bin/auths,/usr/sbin/groupadd,/usr/sbin/groupdel,/usr/sbin/groupmod,/usr/bin/last,/usr/bin/listusers,/usr/bin/logins,/usr/bin/passwd,/usr/bin/profiles,
+/usr/bin/roles,/usr/sbin/useradd,/usr/sbin/userdel,/usr/sbin/usermod,/usr/bin/awk,/usr/bin/cat,/usr/bin/chmod,/usr/bin/chown,/usr/bin/cp,/usr/bin/cut,/usr/bin/diff,/usr/bin/echo,+
+/usr/bin/grep,/usr/bin/ls,/usr/bin/mv,/usr/bin/rm,/usr/bin/sed,/usr/bin/sleep,/usr/bin/sort,/usr/bin/tail,/usr/bin/touch,/usr/bin/which+
What's wrong?

Running VMware Server 2 services as a non-root user

Hello,
I have switched from VirtualBox to VMware Server 2 on my Arch64 server and the transition has been relatively painless. I am at the point now where I want to run VMware's services as a non-root user account (I have a service account called "svc-vmadmin" that I'd like to use). I'm generally not comfortable running services as root, but at the same time I'm conscious of the time and effort required vs. overall benefits.
I've done the usual Google searches and even checked the VMware Server 2 user guide and the VMware community, but I can't find specific details on how to achieve this.
Is this even plausible in a Linux environment? I used to run VMware Server 1 under the SYSTEM account on Windows Server, so I'm hopinga similar thing can be done on Arch.
I would greatly appreciate any information or personal experience that fellow Archers can share.
Thanks,
Thom

System services are handled by launchd.
If you look in /System/Library/LaunchDaemons/ you'll see a plist file for each service including org.isc.named.plist, the plist for named.
If you edit this file you'll see it's an XML document that describes the service and how the OS should handle it, including the part:
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/named</string>
<string>-f</string>
</array>
Just append another entry in the array that says <string>-u nobody</string> (or whatever username you want to run as.

Non-root user can't start Apache on port 443

Today I've been attempting to get SSL working for my Oracle Applications 11i (11.5.10.2) installation and I just hit a small problem. I've followed all of the Oracle literature I've come across, which instructed me to create a new (non-root) user to own the database tier and the applications tier. I've also followed the instructions for configuring SSL ([Doc 123718.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6976756808231635106::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,123718.1,1,1,1,helvetica]) and the SSL wizard in OAM defaults to the standard HTTPS port (443). However, because 443 is a privileged port, a non-root user cannot bind to it. In other words, the Oracle literature itself has led me to an impossible situation. This is what I see in the Apache error log:
[Fri May 15 15:05:03 2009] [crit] (13)Permission denied: make_sock: could not bind to port 443
At this point, I see two choices:
1. Run the application tier services as root.
2. Change the SSL port to something greater than 1024 (i.e. 4443).
I'm leaning towards option #2, since option #1 negates the advantage of using a non-root user to begin with. Does anyone have any other suggestions? Does Oracle have any recommendations for this scenario?

Hi,
You just need to start Apache as root (not all the application services). For Option 1, the application tier files should be owned by applmgr/oracle user (not root), and for Option 2, you do not need to change the port (though it is valid option). Just follow the steps in the following document.
Note: 356080.1 - How to run Apache on Port 80 in Apps 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=356080.1
BTW, this is mentioned in the document "if you have chosen port 443 (or any port under 1024) for your SSL port, you will have to start Apache as root".
Regards,
Hussein

Trying to lock out Solaris 11 non-root users but not working-

Hi,
We are trying to lock out non-root user after 5 unsuccessful login attempts by editing the policy.conf file but it's not working..It's working in the global zone but not in the non-global zones. Is there something else we need to do?
This is Solaris 11 with Solaris 11 NGZs.
kind regards

It works exactly the same way in the global and non global zone cases. This code is 100% userland so it doesn't mater if it is running
in a global or non global zone.
Note that you do need to configure policy.conf in both the global and non global zone.
Are both configured similarly with respect to nameservices ?
Currently we only support lock_after_retries for the local files nameservice.

Weblogic 11g Admin server start up script giving me these 3 lines

I donot know what these 3 lines are coming every time when i start the server.
can any body explain me what are these 3 lines
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter

C:\Oracle\Middleware\user_projects\domains\Testdomain\bin>startWebLogic.cmd
JAVA Memory arguments: -Xms512m -Xmx512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp353\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JROCKI~1.0-6\li
b\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\w
eblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\web
services.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MID
DLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\com
mon\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;
C:\Program Files\Java\jdk1.6.0_12\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_12\l
ib\tools.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp353\profiles
\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~1\JROCKI~1.0-6\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin;C:\oraclexe\ap
p\oracle\product\10.2.0\server\bin;C:\Program Files\Common Files\Microsoft Share
d\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Progra
m Files\CyberLink\Power2Go\;C:\Program Files\Java\jdk1.6.0_12\bin;C:\Program Fil
es\Common Files\Microsoft Shared\Windows Live;C:\Oracle\MIDDLE~1\WLSERV~1.3\serv
er\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter.
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32,
compiled mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -jrockit -Xms512m -Xmx512m -Dweblogic
.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\li
b\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~
1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MI
DDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeD
ev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\M
IDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDL
E~1\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1
\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter.
<May 5, 2010 11:14:22 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Oracle JRockit(R) Version R28.0.0-679-130297-1.6.0_17-20100312
-2123-windows-ia32 from Oracle Corporation>
<May 5, 2010 11:14:23 AM CDT> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<May 5, 2010 11:14:26 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<May 5, 2010 11:14:26 AM CDT> <Info> <WorkManager> <BEA-002900> <Initializing se
lf-tuning thread pool>
<May 5, 2010 11:14:27 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer\log
s\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. T
his can happen on some platforms like Windows.>
<May 5, 2010 11:14:27 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\Oracle\Middleware\user_projects\domains\Testdomain\ser
vers\AdminServer\logs\AdminServer.log00006. Log messages will continue to be log
ged in C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer
\logs\AdminServer.log.>
<May 5, 2010 11:14:27 AM CDT> <Notice> <Log Management> <BEA-170019> <The server
log file C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminSer
ver\logs\AdminServer.log is opened. All server side log events will be written t
o this file.>
<May 5, 2010 11:14:35 AM CDT> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<May 5, 2010 11:14:39 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer\log
s\access.log will be rotated. Reopen the log file if tailing has stopped. This c
an happen on some platforms like Windows.>
<May 5, 2010 11:14:39 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\Oracle\Middleware\user_projects\domains\Testdomain\ser
vers\AdminServer\logs\access.log00006. Log messages will continue to be logged i
n C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer\logs
\access.log.>
<May 5, 2010 11:14:45 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STANDBY>
<May 5, 2010 11:14:45 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<May 5, 2010 11:14:48 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer\log
s\Testdomain.log will be rotated. Reopen the log file if tailing has stopped. Th
is can happen on some platforms like Windows.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\Oracle\Middleware\user_projects\domains\Testdomain\ser
vers\AdminServer\logs\Testdomain.log00006. Log messages will continue to be logg
ed in C:\Oracle\Middleware\user_projects\domains\Testdomain\servers\AdminServer\
logs\Testdomain.log.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Log Management> <BEA-170027> <The Server
has established connection with the Domain level Diagnostic Service successfull
y.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to ADMIN>
<May 5, 2010 11:14:48 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to RESUMING>
<May 5, 2010 11:14:48 AM CDT> <Warning> <Server> <BEA-002611> <Hostname "Sharath
", maps to multiple IP addresses: 192.168.214.1, 192.168.8.1, 192.168.1.13, fe80
:0:0:0:10ad:28ec:b345:3fd6%17, fe80:0:0:0:1da2:6938:f012:2f1%18, fe80:0:0:0:6003
:72e0:df5c:e4e8%20, fe80:0:0:0:18fb:91fd:e3cd:478a%15, 2001:0:4137:9e76:10ad:28e
c:b345:3fd6>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1
]" is now listening on 192.168.8.1:7001 for protocols iiop, t3, ldap, snmp, http
.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1
0]" is now listening on fe80:0:0:0:18fb:91fd:e3cd:478a:7001 for protocols iiop,
t3, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1
1]" is now listening on fe80:0:0:0:f5f4:8112:34d1:6d64:7001 for protocols iiop,
t3, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9
]" is now listening on fe80:0:0:0:10ad:28ec:b345:3fd6:7001 for protocols iiop, t
3, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1
2]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.
>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6
]" is now listening on fe80:0:0:0:6003:72e0:df5c:e4e8:7001 for protocols iiop, t
3, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default"
is now listening on 2001:0:4137:9e76:10ad:28ec:b345:3fd6:7001 for protocols iiop
, t3, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5
]" is now listening on fe80:0:0:0:0:5efe:c0a8:801:7001 for protocols iiop, t3, l
dap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7
]" is now listening on fe80:0:0:0:0:5efe:c0a8:d601:7001 for protocols iiop, t3,
ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8
]" is now listening on fe80:0:0:0:1da2:6938:f012:2f1:7001 for protocols iiop, t3
, ldap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2
]" is now listening on 192.168.214.1:7001 for protocols iiop, t3, ldap, snmp, ht
tp.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3
]" is now listening on 192.168.1.13:7001 for protocols iiop, t3, ldap, snmp, htt
p.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1
3]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp,
http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4
]" is now listening on fe80:0:0:0:0:5efe:c0a8:10d:7001 for protocols iiop, t3, l
dap, snmp, http.>
<May 5, 2010 11:14:48 AM CDT> <Notice> <WebLogicServer> <BEA-000331> <Started We
bLogic Admin Server "AdminServer" for domain "Testdomain" running in Development
Mode>
<May 5, 2010 11:14:49 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to RUNNING>
<May 5, 2010 11:14:49 AM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>
May 5, 2010 11:15:12 AM com.sun.faces.config.ConfigureListener contextInitialize
d
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for co
ntext '/console'
May 5, 2010 11:15:12 AM com.sun.faces.config.ConfigureListener contextInitialize
d
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-F
CS) for context '/console'
<May 5, 2010 11:15:33 AM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on 0:0:0:0:0:0:0:1:49,788 during the configured idle timeo
ut of 5 secs>
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter.
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter.
<May 5, 2010 11:19:46 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppDeploymentsControlPage.>
<May 5, 2010 11:20:09 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethand
le=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DexamplesWeb
App%2CType%3DAppDeployment%22%29.>
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter.
<May 5, 2010 11:21:46 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com
.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DDeployment2%2CTyp
e%3DAppDeployment%22%29.>
<May 5, 2010 11:22:05 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethand
le=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DDeployment1
%2CType%3DAppDeployment%22%29.>
<May 5, 2010 11:40:43 AM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on 0:0:0:0:0:0:0:1:50,036 during the configured idle timeo
ut of 5 secs>
<May 5, 2010 11:42:02 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppDeploymentsControlPage.>
<May 5, 2010 11:42:35 AM CDT> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethand
le=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DDeployment1
%2CType%3DAppDeployment%22%29.>

How to login as a non root user into linux server after rebooting

Hi,
Even though it is not related to Oracle, but i assume that all you are aware about linux.
I wrote a script to make DB up automatically when i reboot the server. But i have to login into the sever as the nonroot user instead of root user automatically.
How can i do this?
Thanks
Mahi

See "How do I get Oracle to automatically start when my server boots up?" in http://orafaq.com/faqunix.htm

Bash issue on solaris 8 ( Segmentation fault for non root users)

Hi,
This is solaris 8 on sparc and a NFS file server for the NIS+ environment. As supposed to be this file server is nis+ client.
Now this issue happens only sometimes and goes away on its own but it did not this time.
I connect to file server using ssh, system closes my session,
this is ssh -vvv log , copied here : http://pastebin.ca/1633893Please note that my shell is /bin/bash. It worked 99% time but not now, nothing is changed on system.
If I ssh root@fileserver then ssh connection works fine. root can also run bash command. and run other commands in bash
For a normal user with csh if the user tries "bash" , then gets
user@fileserver%> bash
Segmentation Fault
I am thinking this is somewhere related to rpc but I do not see any errors on nis+ server nor on fileserver.
%>truss bash o/p is here :
http://pastebin.ca/1633907Please let me know what is this issue related to. If by stopping/restarting a process helps that would be great.
one more thing to note is, other nis+ clients can mount shares from this fileserver properly and authentication also works fine on them even for users with /bin/bash shell and bash does work manually also.
If you need any other info, please let me know
Please help!
Thanks!

Anyone any idea? I thought the truss o/p copied in pastebin might be very useful
Additional info, for someone with /bin/tcsh as shell, when su - <user> from root account, following messages come up
free(4b31688) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b31688) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b316c8) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b316c8) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b31448) bad block. (memtop = 4b7ec00 membot = 9c9a0)
free(4b31448) bad block. (memtop = 4b7ec00 membot = 9c9a0)
free(49fca08) bad block. (memtop = 4b7f400 membot = 9c9a0)
free(49fca08) bad block. (memtop = 4b7f400 membot = 9c9a0)$ truss -f -t stat,open /bin/bash
http://pastebin.ca/1635134

Start SS 12 as non-root user

Hi - I'm a reasonably experienced developer, but a Solaris and Sun Studio newbie.
I have installed SS 12 onto a Solaris 10 box, and felt pleased, until I found it only ran as root.
If I try $ sunstudio
I get
Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
I don't get this as root, and I'm pretty sure the NetBeans is at /opt/netbeans-5.1.1
(Oh yes - the prepare_system tool complains about 'patches' when run with the -C option, but running prepare_system -s patches doesn't seem to help.)
Does anyone know exactly what SS is looking for here - it might help.
And of course - does anyone know the problem?
I'm using a Blade 2500 workstation, with SunOS 5.10 Generic_118833-33, and the SS 12 installation was from
SunStudio12ml-solaris-sparc-200709-pkg.tar.bz2, installed as root.
Thanks for your time.
Jeff

Hi Jeff,
This is strange - usually "prepare_system" installs Netbeans, if it is missed.
BTW, the default directory name is "/opt/netbeans-5.5.1" (not "/opt/netbeans-5.1.1").
Here is a simple way to find out what is wrong. Please, run script "sunstudio" under "bash -x",
and look at the output. Here is an example:
% bash
bash-3.00$ export PATH=/shared/dp/branches/ceres/FCS/inst/intel-S2/bin:$PATH
bash-3.00$ type sunstudio
sunstudio is /shared/dp/branches/ceres/FCS/inst/intel-S2/bin/sunstudio
bash-3.00$ bash -x /shared/dp/branches/ceres/FCS/inst/intel-S2/bin/sunstudio
++ /bin/uname
+ OS=SunOS
+ validate_netbeans_cnd /shared/dp/branches/ceres/FCS/output/intel-S2/pseudoinst/opt/SUNWspro/netbeans
+ '[' -f /shared/dp/branches/ceres/FCS/output/intel-S2/pseudoinst/opt/SUNWspro/netbeans/platform9/core/core.jar -a -d /shared/dp/branches/ceres/FCS/output/intel-S2/pseudoinst/opt/SUNWspro/netbeans/ide10 -a -d /shared/dp/branches/ceres/FCS/output/intel-S2/pseudoinst/opt/SUNWspro/netbeans/cnd2 ']'
+ NBHOME=/shared/dp/branches/ceres/FCS/output/intel-S2/pseudoinst/opt/SUNWspro/netbeans
...Thanks,
Nik

Systemd vboxweb.service mod when needing to start as non-root user

Hi,
Don't know if this will help anyone, but here goes,
I wanted the systemd service unit to run using my local account but to get this to work, I had to do the following:
1. Create a file called vboxweb_mod.conf in /etc/tmpfiles.d with the below inside it (replace <user> <group> with your username and group you want vboxweb started with.)
D /run/vboxweb 0755 <user> <group>
2. Create /etc/systemd/system/vboxweb_mod.service to look like this: (replace <user> <group> with your username and group you want vboxweb started with.)
[Unit]
Description=VirtualBox Web Service
After=network.target
[Service]
Type=forking
PIDFile=/run/vboxweb/vboxweb.pid
ExecStart=/usr/bin/vboxwebsrv --pidfile /run/vboxweb/vboxweb.pid --background
User=<user>
Group=<group>
[Install]
WantedBy=multi-user.target
3. Issue command
#systemctl enable vboxweb_mod.service
4. Either reboot or issue command
#systemctl start vboxweb_mod.service
Hope this helps someone out. (I had to do something similar to get sabnzbd running correctly as a systemd service. :-))

Thanks, you helped me. I had gotten hung up on '--user = <vboxuser>' in the ExecStart line, which works for one of my other services, but not this one.

[SOLVED] Start process or script as a non root user on boot

This is my first time posting here, I installed arch last week and have been able to firgure almost everything out. The wiki pages (very well written) and the forums have been a big help. However this is one question that I haven't been able to find the answer to.
"How do I start a process or script as a user other then root at boot?"
My guess is my inability to find an answer is mostly from my relitivly small understanding of bash scripting. If someone could point me to a guide or write down an example themselves I would greatly apriceate it.
Thank you,
Tim
Edit: spelling
Last edited by tpolich (2009-08-07 05:26:36)

tpolich wrote:One more quick question, is rc.local run the backround or say if I asked for input would the system boot hang?
Yes, rc.local itself would hang, but if you background the process inside rc.local using the '&' symbol at the end of the command, then that command will be backgrounded and rc.local can continue.

Failure extracting WAR classes when starting weblogic server

I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
./config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
Linden

Hi
This is a Unix problem, you may check if you have all the permissions.
I suspect that some of the files which may be owned by someone other than user-value and therefore preventing the writting to the
files.
Can you check the files owership under /usr/local/bea/wlserver6.1/config/mydomain/applications/.wlnotdelete to see if any of the
files or subdirectories are owned by someone else, such as 'root' or even under different group?"
Hope this help
JFG
Linden Lu wrote:
I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
/config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
Linden

**** ASSERTION FAILED **** Error while starting WebLogic Server 7.0

Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
==================================================

I don't know what could cause this error.
I would suggest you take this upto [email protected]
Kumar
Ajay Jadhav wrote:
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
==================================================

Solaris Weblogic 8.1 Server - starting Weblogic as non-root user

Similar Messages

Maybe you are looking for