Solaris won't find IDE disk (sparc)

Hi
I'm trying to reinstall solaris on a UltraII 440Mhz (ide) machine.
On the disk is now debian Linux, but because I'd like to get some experience with Solaris, i'll give that a shot. Debian boots fine btw.
After being able to select the installation medium (cd\DVD) there's a message "initializing system", but at about 50% of that one it just says : no hard disk detected, please power all disks (ore something like that).
The model is a 7200rpm seagate which has been originally in the machine afaik (it's a deprecateed machine from my employer).
What am I doing wrong?
I just booted the installer using:
stop-a
boot cdrom
and click next etc.

You could try and run Solaris "format" and see how it reacts on your disk. To do so you'ld have to boot up into single user from the cd using:
boot cdrom -s
Then, once you get the hash-prompt, just run "format".
Its possible that the installation media can't recognize the disk because it lacks a Solaris label. In that case you'll have to add a Solaris label to it (something you can do with format), however i'm unsure what effect that will have on your Linux instance.
7/M.

Similar Messages

How to get Windows to find airport disk?

I know that I have to get Bonjour to find the airport disk, but the Bonjour that there is for download is just for printer wizard. It won't find the disk, will it? I have no idea how to get Bonjour to find something else besides printer for windows.
And more, when I put a USB hub and add a printer + HD to airport extreme, the power is just enough to run the diskor something. My HD just disappears from the airport extreme. My HD is WD 250GB Passport III Media (FAT32 format)
Pls help. and Thx in adv.
By the way, the windows we use is XP and Bonjour 1.0.5
Message was edited by: PowerBon

The USB port on the AirPort Extreme base station (AEBS) is not designed by Apple to provide power to the hard drive.
Apple recommends using a powered hard drive or a powered USB hub to power the hard drive.

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. Any ideas on how to recover my data?

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. I can see the HD but the volume part is greyed out. Any ideas on how to recover my data?

There are other methodologies of scanning a HD
which involve data extraction, but loss of metadata is often the result if the directory is corrupt.
Metadata is the info on what the data IS.
Like having all your papers thrown in the air, its all there, but just a giant mess.
This is why you always always must have several external HD redundancies of your data. One isnt enough, neither is two really.
see here, and dont let that happen again>
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Was that your only copy of your priceless data? Just that one external HD?

Solaris 8 x86: Installation on disk connected via IDE controller

I have a PC with a Pentium 4 processor and the following IDE disks:
Disk 1 and 2 at the primary IDE bus.
Disk 3 connected via Promise Ultra 133 IDE controller.
I want to install Solaris 8 Intel x86 edition on Disk 3, but the installation
program only lists disks 1 and 2 as locations for install.
Is there any method how to get Solaris 8 installed on Disk 3?
Thank you very much for your help!

Hello Michael,
thanks for the information.
There is no support for the Promise Ultra 133 IDE controller listed.
Also, searching the internet for a private developed driver was not
successful.
Anyway, I have tried to make a test installation on a hard disk
connected to the primary IDE controller and I detected a lot of
further installation problems with my equipments because of
missing or not properly identified drivers.
So I think I have to make further investigations on concepts
how to get Solaris 8 run in the best way.
Thanks again for your help,
Thomas

Solaris v10 sparc jumpstart server on x86 solaris - can't find miniroot.

I am trying to setup a jumpstart install server on an x86 solaris v10 machine to do a sparc network install. I downloaded both the CD and DVD sparc v10 ISO's. When I mount the CD, the Solaris_10/Tools/Boot directory (miniroot system) is symlinked back to ../../../s1 which does exist. I can't find it on the CD, I've used prtvtoc and this slice does not seem to exist.
On the DVD iso, the directoy exists, but many files cannot be read, almost like the filesystem is corrupt.
I've download these ISO and burned them many times, so I know it's not an issue with hardware or the CD/DVD media.
Where can I download a working sparc solaris v10 miniroot system?

There is no such entry under solaris. This entry only exist on windows.
On solaris you need to change entries in the kjs script (prior to SP3)
or iasenv.ksh (after SP3)
madhavi korupolu wrote:
>
Can anybody tell me why the entry for /Application Server/6.0/Java/ in
kregedit on solaris is missing. I have the entry upto /Application
Server/6.0/.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

SATA Disk won't work without a IDE disk connected.

Hi, my specs :
k8n neo2 platinum
amd xp3000+
crucial 3200 ddr memory
Samsung Spinpoint S-ATA 160GB
(IBM 70GXP IDE 40GB) Just in the box to make the S-ata drive work
NEC DVD-RW
I've been running this machine now for 3-4 months, with both HDD's. Today I decided to remove the noisy IBM disk from the system. I removed it from the Primary IDE Slave and made the DVD-RW stay alone on the Primary IDE.
So, now the only thing I got installed is the S-ATA disk on SATA3 or SATA4 slots.
and the NEC DVD-RW on Primary Master.
The problems starts here
Now my machine only goes to bios and stops because : INSERT SYSTEM DISK blablabla...
My SATA disk is properly displayed in BIOS as a working HDD. No problem there... I have tried everything, believe me... Everything that can be done... I have changed the Sata disk to all diffrent SATA slots, 1/2/3/4 and Cleared the BIOS, resetted the bios you name it.
But, when i install the IDE disk (ibm disk) on the Primary Slave IDE, everything works well!
PS: The IBM disk is just a MP3 disk that doesn't store anything else than that.
But!, in Windows, the IBM disk is named C:\ and the System disk (on the S-ATA drive) is named D:\ (no problems running WinXP at all with that issue)
This is really annoing, like i'm going to have that noise IBM disk in my chassis forever!

Your problem is that you had the ide disk connected when installing xp on the sata (3'rd master).
Windows_inst always use a disk on 1'st or 2'nd ide channel as system drive if it finds one (the first it sees) . So the ntldr,boot.ini,ntdetect.com is placed there .
When you remove the IBM drive there is no boot drive anymore .
What you should have done when installing windows to the sata drive
is to temporary disconnect all drives in front of it , so that the sata 3'rd master
is the first disk win_install sees .
Now you have registry of all programs and such pointing to D: in that win installation.
You should take the time to do a fresh new install with only the sata drive connected . This makes it system drive and it's partition C: .

The computer I had my phone attached to crashed. I have installed iTunes on my laptoop and updated and resotred my phone but iTunes won't find it. I've done the troubleshooting. Any ideas?

The computer I had my phone attached to crashed. I have installed iTunes on my laptoop and updated and restored and reset my phone but iTunes won't find it to sync. I've done the troubleshooting. Any ideas?

Well, you do not say what computer OS you use, so I'll provide you with both troubleshooting links.
Windows: http://support.apple.com/kb/TS1538
Mac OS: http://support.apple.com/kb/TS1591

External RAID0 won't mount in Finder or Disk Utility

Hi everyone,
Thanks in advance for any help you can provide.
I have a Western Digital Passport RAID0 that I connect to my 2008 Mac Pro via Firewire 800. It has worked for years. I switched out one of the drives about a year ago after it went bad, but when I did that, Disk Utility was still able to see the two separate drives when plugging it in the first time after switching them out.
This time, when the RAID0 wouldn't mount in Finder, I opened up Disk Utility and neither drive showed up. So I opened up the enclosure and tested both drives in a USB dock. One mounted fine, the other said it was unreadable. So I set the unreadable one aside and switched it out with a same-size replacement drive that I had partitioned as MacOS Extended Journaled (non-case sensitive) with GUID partition table (same as the other drive and all drives on my system).
Reassembled the enclosure and plugged it back in. Still, neither drive is recognizable by Finder or Disk Utility. Verified it has power and that the cables are seated correctly. I also tried USB connection just to be safe.
I do not believe the RAID controller in the enclosure is bad—at least it seems very illogical that a drive and the controller would fail at the same time, as I have it well protected against power surges.
Any thoughts as to something I may be missing or known issues? I upgraded to Yosemite at its public release but successfully used the drive between then and now.
Thanks again!

Eric, nifflerX and nbar:
That's what I was afraid of.
Thanks for your help.
Stonely

External drive not recognised in Finder or Disk Utility on new Mini

Hi,
I've just bought a new Mac Mini and it won't recognise my Seagate Expansion drive in either Finder or Disk Utility. The drive is fully accessible on my old Macbook (running Snow Leopard), and ran fine on my old iMac running Mavericks. I've tried the troubleshooting tips in other threads - Seagate External Hard Drive does not work on Yosemite - but since they refer to people upgrading to Yosemite, I'm wondering if this might be down to the hardware in the latest Mini models? Any info or ideas on what to try next would be hugely appreciated!
Thanks.

- Do other external USB drives work on your Mini?
- If you go to System Report (click on Apple icon in upper left and select About this Mac>More Info>System report) what shows for the drive under Hardware>USB? Yo should see the enclosure chip as well as the drive itself.
- Tr resetting the SMC and PRAM
- If you purchased the Mac within the last 90 days you still have free telephone support
Complimentary Support (USA)

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

ITunes Library search won't find song actually in library

i have the problem with iTunes 7.5 it won't find some of the songs in my library when i search them. i can see them in the library, but when i type a word from artist or album it won's show anything.
any ideas?
also, why doesn't the album cover change per song i listen? it only shows the selected item, other words, the song which i last looked at.
thanks.

sorry, found the answer in another topic. next to the search bar is magnifying glass and there you can select what to search. somehow mine ended up on songs only... thanks

External hard drive not visible in Finder or Disk Utility

Hi everyone,
My Wester Digital 2TB external hard drive has disappeared, so to speak, with all my photos. I work as a freelance photographer. Mostly on Lightroom 5.6
When I plug it in, with firewire, I can feel the disk rotating normally however it does not appear in finder or disk utility.
I've tried using a USB cable, restarting my mac, forced restart, changing firewire ports (HD has 2 ports), plugging the HD into a different laptop and nothing.
Ive also searched Finder prefrences and visibility is enabled.
I have no idea what could have caused this as I was using the HD the night before. I didnt pullout without properly ejecting. Maybe the HD is full or almost, but I dont think that would the cause of these troubles.
I'm using a late 2011 Macbook Pro OS X 10.9.4
Any suggestions??
Thanx

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

Boot camp, "cannot find installation disk."

What do I do? It's a Microsoft download from the MSDN Academic Alliance (Win 7 Prof. 64-bit) and I am getting this error.
I downloaded the Win 7 Prof. from Microsoft's MSDN AA site on a PC.
Opened boot campo and created the partition and the CD is visible in finder (.ISO) but boot camp says "cannot find installation disk."
So I moved the .ISO to my desktop and burned a new CD using the iMac Superdrive and receive the samer error.
Anyone have any ideas?

Boot Camp will not install from an ISO file. You must have a bootable DVD. Whatever is on your disc image it apparently is not what is on a bootable DVD. You may simply have a .exe installer application that will only work on a Windows machine or on a pre-exisitng Windows system on a Boot Camp partition.

TM: Spotlight Won't Find Deleted File

As a test, I created a file just before TM began an hourly backup. After the backup was completed, I deleted the file.
When I open finder and search for the file using spotlight, of course it doesn't find it. When i call up the TM display and click the arrows, it still doesn't find it. In fact, spotlight won't find the file in TM at all. But because I know the exact time and date of the backup that has that file, I can navigate to the exact directory and find it. The file is there, and it only exists in that one backup.
So TM is working, but this isn't exactly the most convenient if you've deleted a file a month ago, have no idea when it was backed up, and can't remember where it was located.
I've tried it with the TM drive both in and out of the spotlight privacy pane--doesn't seem to make any difference. Known issue?

Hmmm, it sounds like Spotlight's DB is corrupt or not functioning properly.
Might give a try with Spotless...
http://www.fixamac.net/software/spot/
For finding files by name you might like one of these...
EasyFind...
http://www.macupdate.com/info.php/id/11076
Or Find Any File...
http://www.macupdate.com/info.php/id/30079/find-any-file

Time Machine cannot find Backup Disk

Hey I just got Leopard and I have a backup disk connected to my router which is shown in finder on my shared list, however, when I try to set up Time Machine it cannot find the disk... any ideas?!
Many thanks

Only Time Capsules work wirelessly with Time Machine.

Solaris won't find IDE disk (sparc)

Similar Messages

Maybe you are looking for