Solaris x86 11/06 hung on Acer TravelMate 8210 Laptop

I've just installed Solaris x86 11/06 on my Acer TravelMate 8210 laptop. The installation was completed successfully. However, when the system is rebooted into Solaris, it is always hung at:
�Use is subject to license terms.�
This problem happens with both of the 32-bit and 64-bit kernel. While booting with the option �-kv�, the system always stops at:
�PCI Express-device: pci8086,2448@1e, pci_pci0
pci_pci0 is /pci@0,0/pci8086,2448@1e�
I�ve also tried to boot with the �-s� option, but it doesn�t help.
Is there anything else that I can try? Thank you in advance!
Here is my system spec:
http://reviews.cnet.com/Acer_TravelMate_8210_6597_Core_2_Duo_2_GHz_2_GB_RAM_160_GB_HDD/4507-3121_7-32114677.html?tag=nav
Before the installation, I ran the Solaris Installation Check Tool 1.2, and it said that the system is able to run Solaris.

I've just installed the Solaris Express DE 2/07 and still have the same problem.
Message was edited by:
ductuanon

Similar Messages

Can't get mic to work on Acer TravelMate P

Hello there Arch forum.
@mod
I'm not sure if this post is best placed in laptop/media or newbie corner, I have used Arch for 2 years now but I'm a noob on pulseaudio.
Feel free to move it to the desired location.
Anyone have any suggestions on how to get my head set microphone to work in mumble on my Acer TravelMate P laptop.
I have tried different things that was suggested on the PulseAuido Troubleshooting page.
But I think its a problem with a hardware button that can mute the microphone located just beneath the screen.
When press the button nothing happens..
Output of some commands.
$ arecord --list-devices
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ pacmd list-sources
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 69160 / 106% / 1.40 dB, front-right: 69160 / 106% / 1.40 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_03.0>
module: 6
properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0630000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 41353 / 63% / -12.00 dB, front-right: 41353 / 63% / -12.00 dB
balance 0.00
base volume: 5206 / 8% / -66.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC282 Analog"
alsa.id = "ALC282 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC282"
alsa.components = "HDA:10ec0282,1025081e,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-internal-mic>
Thanks in advance

Re: Can't get Mic to work? I'm using the Steelseries Siberias headset, with a standalone Zalman mic. I never unplugged them, I only reformatted from a cracked verion of Windows 7, to a legit version of Windows 7. The versions were actually the exact same, and now I regreat Formatting.
Here are some of My PC's Specs
http://img9.imageshack.us/i/specsq.png/
I'm using the ATI Radeon 4870
Creative XtremeGamer
http://img704.imageshack.us/i/sound.png/
http://img684.imageshack.us/i/drivers.png/
I've just gottren really frusterated. I'm about ready to go back down to XP just to get this to work, I use my microphone for so many different things.
I've searched this problem, it seems there are numerous people with the same problems, and I just find that sad, I've been using creative products for a long time now, and have never had a problem like this before.

Installing Solaris 8 on Acer Travelmate 330T

I can't configure my Acer Travelmate 330T, which had Windows 98SE installed, to run Solaris 8. There are a few problems:-
1. The installation procedure will come to a point where it asked whether I want the program to fdisk cd0f0. If I answered YES, my Windows 98 is gone for good. If I answered NO, the installation stops. Does anyone have the solutions for this? Please advise (as I desperately need to dual boot with Windows and Solaris 8).
2. I tried installing Solaris 8 into a brand new harddisk using the same laptop. I selected YES to the above fdisk question. Everything went on well (I supposed so). However, when it reach the stage of configuring the video display drivers, I was stucked there. My laptop has a Trident display card with 2.5MB of RAM and a 12.1" LCD monitor. I can't find the name of my laptop's display adaptor in the list. I tried a few combinations but all failed. Can anyone please help?
Thanks.

Hi,
Check your motherboard and other hardware devices are
supported by intel Solaris x86 or not.
Check your hardware compatibility list try this URL:
http://soldc.sun.com/support/drivers/hcl
Revert back.
Thanks & Regards,
Senthilkumar
SUN - DTSHello Senthil
I have contacted Dell for the motherboard model number, but they were not able to provide the number (strange)
The URL you gave, does not have my DELL OPTIPLEX GX400 listed as this is a relavitvely new model, however the older system in the same series are shown to be comaptible.
Chip set
Intel 850 Peripheral Component Interconnect (PCI)/accelerated graphics port (AGP)
Data bus width64 bits
Address bus width
32 bits
Direct memory access (DMA)
channels
eight
Interrupt levels
15
BIOS chip
4 megabits (Mb)
System bus speed
100 megahertz (MHz) clock, 400 MHz data rate

Deinstall on Solaris x86

not sure if this is the right place, but couldn't see one that was more germaine.
i just used dbca to remove a 10gR1 database from a system and then used runInstaller to remove the binaries. it hung up the system and ended up corrupting the mounted filesystem -- we had to do a umount and fsck to get it back and all the bad nodes were oracle nodes.
has anyone else had or heard of this kind of situation? is this a bug? did i do something wrong?
help?

We are doing work on converging the JVMs (Hotspot and JRockit). Solaris x86 is supported today for hotspot, and will be supported by the converged JVM as it is released.
As things stand right now, JRockit will not be supported on Solaris x86 until JRockit will be replaced by the converged JVM.

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
 at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
 at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
 at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
 at oracle.net.ca.InitialSetup.<init>(Unknown Source)
 at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000 /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000 /lib/libthread.so.1
0xfefd0000 /lib/libdl.so.1
0xfeed0000 /lib/libc.so.1
0xfea00000 /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000 /usr/lib/libCrun.so.1
0xfee50000 /lib/libsocket.so.1
0xfedc0000 /lib/libnsl.so.1
0xfeda0000 /lib/libm.so.1
0xfeeb0000 /usr/lib/libsched.so.1
0xfe9a0000 /lib/libm.so.2
0xfed50000 /lib/libscf.so.1
0xfe980000 /lib/libdoor.so.1
0xfe960000 /lib/libuutil.so.1
0xfe940000 /lib/libmd5.so.1
0xfe920000 /lib/libmp.so.2
0xfe8e0000 /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000 /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000 /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000 /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000 /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000 /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000 /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000 /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000 /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000 /usr/dt/lib/libXm.so.4
0xf0cf0000 /usr/openwin/lib/libXt.so.4
0xf0cc0000 /usr/openwin/lib/libXext.so.0
0xf1890000 /usr/openwin/lib/libXtst.so.1
0xf0c30000 /usr/openwin/lib/libX11.so.4
0xf0be0000 /usr/openwin/lib/libdps.so.5
0xf0a90000 /usr/openwin/lib/libSM.so.6
0xf0a70000 /usr/openwin/lib/libICE.so.6
0xf0a30000 /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000 /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000 /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000 /lib/libkstat.so.1
0xefc40000 /lib/libgen.so.1
0xefc20000 /lib/librt.so.1
0xefbf0000 /lib/libaio.so.1
0xefbd0000 /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1 localhost.localdomain localhost
#192.168.100.1 bt.lan.home bt
#192.168.100.5 jacek.lan.home jacek
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

How to upgrade oracle 32 to 64 bit on sun solaris x86 64 bit OS?

Hi,
I want to upgrade/convert 32 bit Oracle Database 10.2.0.2 to 64 bit database. Existing 32 bit database is RAC and it is running on Sun Solaris X86 64 bit OS.
First, I want to know is it possible?
If yes, then what are the exact steps?

Hi,
Such a migration can be done, just follow the steps in Metalink note 62290.1
It is important to remember that 64-bit database requires more shared pool memory so you should increase your shared pool size.
Liron Amitzi
Senior DBA consultant
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Edited by: Liron Amitzi on Jul 1, 2009 3:08 PM

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

How to integrate Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

From 7.3 on NT to 8 on Solaris x86?

Has Oracle ported Oracle8 for Solaris x86?

Hi,
usually I expect people to do a little research and I do not give everything chewed.
Point 4:
go to the
Oracle9i Database Migration Release 2 (9.2)
go to the chapter 3
Upgrading a Database to the New Oracle9i Release
go to the point:
Upgrade the Database Manually
Exactly from here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
Keep in mind
1) that the EXACT procedure you are following it is not indicated in this manual
2) you have to think a little ( do you have all the windows services created on the destination system? if not, you have to create them ... )
3) this procedure is not supported by SAP. It is a valid option but not supported by them. You have to practice until you get all the points correctly

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Help with evaluation for Solaris x86

Hello,
I would like to evaluate Oracle Identity Manager and Access Manager products at the latest version possible -- the host system(s) are Solaris x86 (SunOS .5.10) Unfortunately, I am having a bit of trouble compiling the list of packages/versions to achieve this for this platform. For instance, on the downloads page it appears that OIM is not available for Solaris x86, not even in older versions(?)
Thank you in advance,
Scott

Hi Scott,
I'm pretty sure that x86 Solaris is not yet certified to run the Identity Management suite. I've been involved in an evaluation process and we ran it all on RedHat Enterprise Server Release 4 Update 5, without too many problems.
cheers,
James

Core 2 Duo and solaris x86 11/06 works for me

This is FYI, since I seen (and posted) problems, but I haven't seen the solution posted.
I have successfully gotten solaris x86 11/06 to install and run on my core 2 duo machine. I had tried solaris x86 06/06, but I could only run in 32bit mode until patch 118855-19 was installed. It looks like 118855-33 is the baseline for 11/06.
With 06/06 I had to edit the grub command and add " kernel/unix" to the end of the 2nd line. This would force 32 bit mode rather than 64 bit. If I tried 64 bit, it would enter an endless reboot cycle. Once I installed the patch to 118855-19 I could run solaris 10 06/06 in 64 bit mode without issue.
Again, since solaris 10 11/06 is at 118855-33, it runs on my core2 machine straight from the install.
Hope this helps

On a laptop there is little point with running a 64-bit operating system unless it physically has more than 4gb of ram, or if you are processing datasets exceeding 4GB of ram. Unless you're into assembly or use Solaris for some reason to manipulate media, little is to be gained by using 64-bit versions if anything. The increased pointer, integer, and padding causes more memory to use for the same software, most software on 64-bit operating systems runs in 32-bit mode because there is no need to have 16 exabyte memory addressing capability for anything but media encoders, giant databases, or extremely bloated single-threaded software. Sun Java Creator takes a heck of a lot of ram, but even at peak it's still under 4GB. If you move files bigger than 4GB, the ability to memory map all 4096MB might have less overhead on a 64-bit operating system, but generally from an end-user perspective, especially on a fast Intel or Opteron system, you won't notice the difference much. Solaris is bi-arch, a large chunk of Windows Vista and XP x64 is bi-arch, and most of FreeBSD and Linux are bi-arch in 64-bit versions, as I said, no point in making everything 64-bit. 64-bit device drivers is an issue for every OS, you should stick with 32-bit on a laptop, and hold off on desktops unless you need extended assembly registers available only in 64-bit mode.

Solaris x86 11/06 hung on Acer TravelMate 8210 Laptop

Similar Messages

Maybe you are looking for