Solaris x86 install ok, audio not working

I have installed V10 on an MSI AMD x86 (32bit) board, coexisting with my Windows,Linux and OS/2 partitions. All works ok, except audio.
This is an NVIDIA based board, and uses the NForce drivers. I saw one entry in the HCL about the Audio810 driver, but that didn't help.
I need audio to work to try out the Java Desktop Accessibility features.
ps, it works in Linux, Fedora Core 3.
I also installed a Creative PCI Soundcard, so could use this instead. The boot time configurator sees the hardware in the PCI slot, but never does anything with it.
help help..
thanks
Sam

I ran into this as well. As soon as it detects an audio error, it shuts down the "audio server". Once you get valid drivers (or a valid card, like the Sound Blaster), you have to activate the audio server function in JDS.
I can't remember exactly where is it located off the top of my head, but I had to do that last week when I ended up installing drivers for the Intel 82810BA audio chipset. Once I activated the audio server (or sound server or something like that), I was able to get full audio with the exception of the CD audio. I have no idea what that's about.
I remember that I found the audio server check box somewhere in one of the GUI configuration tools. Search around. You should be able to find it after a while.

Similar Messages

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • Toshiba HD audio not working

    Hi all, i have a toshiba satellite pro l300 with HD Audio like soundcard. My system is windows 7 ultimate edition.
    Sound have suddenly stop working i have try installing realtek driver not working, clean the computer not working. i have installed debian to see if it is a windows or a hardware problem. on Debian (linux) the sound is coming out on the right speaker the
    left is out. i can not figure if it is a driver problem. but i am always sure that one speaker is giving. i have try to balance all the sound to the right speaker to disable the left but no effect. is there any way to tell windows to disable (don't use) the
    left speaker only the right.
    Specs: Toshiba satellite pro l300-29h, intel HD Audio, windows 7 ultimate 32 bits

    yes, this is not hardware issue, I suggest you perform again basic troubleshoot regarding sound, it must be 3rd party software conflict or bad driver
    http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    is there any changes before this issue happen?
    if everything normal before, did you try system restore?
    I suggest do clean boot to isolate 3rd party software issue

  • After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working.

    After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are  not working . When I try to open the app the screen just flashes and then nothing happens. Built in apps works fine . Please help

    I realize that installing apps is not the problem. Installing another app from the app store is a recommended troubleshooting tip from Apple if all of the third party apps will not open. It resets your iTunes authorization when you install the app because you have to enter your password.
    If you didn't install another app try it. Read this support article as well.
    iOS: Troubleshooting applications purchased for the App Store
    Try this as well. Quit all apps, reset the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad.
    Go back to Settings>Store>Sign in and then see if the apps will launch.

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

    it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

    Assuming you are not manually managing your music, verify the following:
    You are using the latest version of iTunes
    On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
    In your music library you have checked all the songs you want to sync to your phone
    There are no exclamation points next to any of the songs you want to sync to your phone
    You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
    You have checked "Sync Music" on the Music tab of your iTunes sync settings
    When everything looks correct, sync your phone.

  • I want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

    i want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

    Iam using o player... Ac3 dts audio not working msg showing

    Settings > General > Reset > Reset Network Settings
    Contact the carrier.

  • I have the Native AMP stack installed but apache not working

    i have the Native AMP stack installed but apache not working is there a way to reset apache manafaacture settings

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • HT201304 I can't install any app from apple store. The install button is not working now. Before it was working perfectly had installed many app and I had purchased many app from i-store

    I can't install any app from apple store. The install button is not working now. Before it was working perfectly had installed many app and I had purchased many app from i-store

    If you installed Leopard that is why you can't install Mt Lion. The system Must be running Snow Leopard 10.6.8 to upgrade to Lion or Mt Lion.
    If you only erased the Macintosh HD partition then you left the Mt Lion Recovery HD partition in tact on that system. At startup hold down the Command+r keys to boot to the Recovery HD Partition. From there erase the Macintosh HD partition and then select Reinstall Mac OS X. It should then download Mt Lion and ask you for the Apple ID that was used to purchase Mt Lion.
    The Reason Snow Leopard might not be installing is because of the Recovery HD partition. To get rid of that you must First Re-Partition the drive As One Partition. Then install Leopard then SL (Or Snow Leopard from the start) and then update it to 10.6.8. Once that is done you should be able to log on to the Mac App Store and Re-Download Mt Lion.

  • Windows 8.1 beats audio not working

    Product name: HP ENVY TouchSmart Sleekbook 4
    after update windows 8.1 beats audio not working
    This question was solved.
    View Solution.

    Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
    Let me know if this helps ...
    DOWNLOAD LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

  • I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

    I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

    Weird... Turned the iPad off and back on, while waiting on the line to be connected to an apple support specialist, now it works.

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • My iPad 1 is not responding. I restored to factory settings and when it says to hook up to I tunes it still won't work. I have restarted I tunes and uninstalled and installed and still not working. Help!!!!

    I restored to factory settings and when it says to hook up to I tunes it still won't work. I have restarted I tunes and uninstalled and installed and still not working. Help!!!! Before I reset it it would say not charging but it was still charging. This could be a hardware problem with the I pad.

    Explain exactly what "it won't work" means. The iPad does not respond at all? Does it turnn on? It is not recognized in iTunes when you connect it to your computer?

Maybe you are looking for

  • Set up & siync New Z22 with old Z22 data

    My old Z22 malfunctioned, so I bought a new one. I would now like to get the data in the Palm software on my computer (not in Outlook) with my new handheld. I cannot fine documentation for how to do this, but it must be somewhere, as I am sure I am n

  • Recording from webcam in Flex

    Hi! I was wondering if I am able to record the images of a webcam in Flex. Is it possible, and if so, how can I make it? I'm using MJPEG images (ByteArray stream), so can it be a possible way to paste/add images to a Movie (or sg like that) object, a

  • Creditors report site wise

    hi , kindly tell me the t-code for seeing vendor report site wise where can see vendor, site, open credit, close credit. in fbl1n it is coming but field site is blank. kindly give the suggestion. regards santosh jaiswal 9911736444

  • EAP-TLS w/freeradius failing. Phone doesn't present Client certificate.

    Hello, I'm currently on the first phases of deploying a Cisco IPT 802.1X based proof of concept using freeradius, Cisco switching infrastructure (4500's). The requirements are to use EAP-TLS authentication for the phones, and freeradius as Radius Ser

  • [SOLVED] Processes hang on __blkdev_get

    Edit: A problem with the DVD reader, probably defective. I've edited the post now that I've figured out it's not a problem with the applications themselves. Some programs, ie. XBMC become interruptible when launched, this happens consistently a littl