Solaris zone hangs at boot
Hi Everyone!
A zone that I just created and configured just seems to hang at boot and even I tried killing the zoneadm process nothing helped.
Any ideas what could cause this?
Thank you...
Svetlana
I was able to get into the zone, I did the following:
bash-3.00# zoneadm -z ecds-traffic boot -- -s
zone 'ecds-traffic': WARNING: zone is in state 'ready', but zoneadmd does not appear to be available; restarted zoneadmd to recover.
bash-3.00#
bash-3.00#
bash-3.00
Then from another terminal:
bash-3.00# ps -ef | grep ecds-traffic
root 11474 1 0 09:22:00 ? 0:00 zoneadmd -z ecds-traffic
root 11496 11490 0 09:22:32 pts/1 0:00 grep ecds-traffic
bash-3.00# kill -9 ecds-traffic
found this on another forum, thank you!
Svetlana
Similar Messages
-
Don't know if this is a right place, if it's not, please direct me, thanks!
I had a SPARC Ultra 10 machine running under Solaris 10, it was
running for couple months. Recently when I reboot it, it was hang at
"Use is subject to license terms."
I press STOP+A to bring me to ok prompt, then type boot -v, the
following is the output:
ok boot -v
Boot device: /pci@1f,0/pci@1,1/ide@3/disk@0,0 File and args: -v
The boot filesystem is logging.
The ufs log is empty and will not be used.
Size: 0x704c8+0x1b8d2+0x2e1ba Bytes
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000,
0x10704c7] data at 0x1800000
module misc/sparcv9/krtld: text at [0x10704c8, 0x10889e7] data at
0x1849a90
module /platform/sun4u/kernel/sparcv9/genunix: text at
[0x10889e8,0x11cd177] data at 0x184ee80
module /platform/SUNW,Ultra-1_10/kernel/misc/sparcv9/platmod: text at
[0x11cd178,0x11cd20f] data at 0x189ffc8
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at
[0x11cd240, 0x11d92af] data at 0x18a0700
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:fd:88:8e
mem = 524288K (0x20000000)
avail mem = 515342336
root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
It hung *******************
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Redirected to slice: 1
Loading: /platform/SUNW,Ultra-5_10/ufsboot
Loading: /platform/sun4u/ufsboot
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
| ***** hung in here again.
Any suggestions!
PeterHi Michael,
Thank you for your email.
I did as what you suggested and still couldn't boot it up. Here are output:
ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pcia-probe-list 1,2,3,4 1,2,3,4
pcib-probe-list 1,2,3 1,2,3
mfg-mode off off
diag-level max max
#power-cycles 260
system-board-serial#
system-board-date
fcode-debug? false false
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? false false
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? true false
ok
ok probe-scsi-all
/pci@1f,0/pci@1/scsi@1
ok
ok probe-ide
Device 0 ( Primary Master )
ATA Model: ST340016A
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
Removable ATAPI Model: CRD-8483B
Device 3 ( Secondary Slave )
Not Present
ok
ok test-all
Testing /SUNW,ffb@1e,0
Testing /pci@1f,0/pci@1/scsi@1
No targets found
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1,1/SUNW,m64B@2
Display not installed
Test hardware registers - passed Ok
Test RamDAC - passed Ok
Test Frame buffer - passed Ok
Testing /pci@1f,0/pci@1,1/network@1,1
Hme register test --- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading LInk status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
failed.
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1,1/ebus@1fdthree@14,3023f0
Testing floppy disk system. A formatted disk should be in the drive.
Recalibrate failed. The floppy drive is either missing, improperly connected, or defective.
Selftest failed. Return code = -1
ok
ok boot cdrom -sv
Boot device:/pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args: -sv
Size: 0x7a768+0x1c319+0x30443 Bytes
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000,0x107a767] data at 0x1800000
module misc/sparcv9/krtld: text at [0x107a768,0x10933af] data at 0x184c760
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10933b0,0x11f0f17] data at 0x1852000
module /platform/SUNW,Ultra-5_10/kernel/misc/sparcv9/platmod: text at [0x11f0f18,0x11f0faf] data at 0x18a4558
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at [0x11f0fc0,0x11fd1c7] data at 0x18a4c80
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:fd:88:8e
Using default device instance data
mem = 524288k (0x20000000)
avail mem = 5144596864
root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device:pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
********stucked
The strange thing is that I replaced a hard disk yesterday and at one time I was able to boot it to single user mode, but when I tried to install OS on the new disk, it stopped at the place where I described as above again.
I have no totally no clues where the problem might be.
Appreciate your helps.
Peter -
Zfs core dumps in Solaris Zones after patchcluster installation
Hi
I've installed the recommended patch cluster for Solaris 10 (SPARC) on my T2000 Server.
Now after the reboot all the Solaris Zones (got about 10 of them) instantly do zfs core dumps when their booted.
Some Output:
Dec 15 15:34:43 XXXXX genunix: NOTICE: core_log: zfs[1711] core dumped: /var/core/core_XXXXXX_zfs_0_0_1292423682_1711
bash-3.00# svcs
STATE STIME FMRI
online 13:58:50 svc:/system/svc/restarter:default
online 13:58:51 svc:/system/filesystem/root:default
online 13:58:51 svc:/network/loopback:default
online 13:58:53 svc:/network/pfil:default
online 13:58:54 svc:/system/installupdates:default
online 13:58:55 svc:/system/boot-archive:default
online 13:58:56 svc:/network/physical:default
online 13:58:57 svc:/system/filesystem/usr:default
online 13:58:57 svc:/system/identity:node
online 13:58:58 svc:/system/device/local:default
online 13:58:58 svc:/system/keymap:default
online 13:58:58 svc:/milestone/devices:default
online 13:58:58 svc:/system/filesystem/minimal:default
online 13:58:58 svc:/system/rmtmpfiles:default
online 13:58:58 svc:/system/cryptosvc:default
online 13:58:59 svc:/system/identity:domain
online 13:58:59 svc:/system/name-service-cache:default
online 13:58:59 svc:/system/coreadm:default
online 13:58:59 svc:/network/ipsec/ipsecalgs:default
online 13:58:59 svc:/application/print/ppd-cache-update:default
online 13:58:59 svc:/network/ipsec/policy:default
online 13:59:00 svc:/milestone/network:default
online 13:59:00 svc:/network/initial:default
online 13:59:00 svc:/system/manifest-import:default
online 13:59:00 svc:/network/service:default
online 13:59:00 svc:/milestone/single-user:default
online 13:59:00 svc:/network/dns/client:default
online 13:59:00 svc:/network/routing-setup:default
online 13:59:00 svc:/milestone/name-services:default
online 13:59:03 svc:/milestone/sysconfig:default
online 13:59:03 svc:/system/utmp:default
online 13:59:03 svc:/system/console-login:default
offline 13:58:51 svc:/system/sysidtool:net
offline 13:58:51 svc:/network/rpc/bind:default
offline 13:58:51 svc:/system/sysidtool:system
offline 13:58:52 svc:/network/nfs/status:default
offline 13:58:52 svc:/network/nfs/nlockmgr:default
offline 13:58:52 svc:/network/nfs/cbd:default
offline 13:58:52 svc:/network/nfs/mapid:default
offline 13:58:52 svc:/network/inetd:default
offline 13:58:52 svc:/network/nfs/client:default
offline 13:58:52 svc:/system/filesystem/autofs:default
offline 13:58:53 svc:/system/system-log:default
offline 13:58:53 svc:/network/smtp:sendmail
offline 13:58:53 svc:/system/cron:default
offline 13:58:53 svc:/milestone/multi-user:default
offline 13:58:54 svc:/application/management/snmpdx:default
offline 13:58:54 svc:/application/management/dmi:default
offline 13:58:54 svc:/application/management/seaport:default
offline 13:58:54 svc:/network/ssh:default
offline 13:58:54 svc:/milestone/multi-user-server:default
offline 13:58:54 svc:/application/font/fc-cache:default
offline 13:58:55 svc:/application/management/sma:default
offline 13:58:58 svc:/system/sac:default
offline 13:59:00 svc:/network/shares/group:default
offline 13:59:00 svc:/system/boot-archive-update:default
maintenance 15:34:43 svc:/system/filesystem/local:default
uninitialized 13:58:52 svc:/network/rpc/gss:default
uninitialized 13:58:54 svc:/application/font/stfsloader:default
uninitialized 13:58:55 svc:/network/rpc/rstat:default
uninitialized 13:58:55 svc:/application/print/rfc1179:default
uninitialized 13:58:55 svc:/application/x11/xfs:default
uninitialized 13:58:55 svc:/network/finger:default
uninitialized 13:58:55 svc:/network/ftp:default
uninitialized 13:58:56 svc:/network/login:rlogin
uninitialized 13:58:56 svc:/network/nfs/rquota:default
uninitialized 13:58:56 svc:/network/rpc/rusers:default
uninitialized 13:58:56 svc:/network/rpc/smserver:default
uninitialized 13:58:57 svc:/network/security/ktkt_warn:default
uninitialized 13:58:57 svc:/network/shell:default
uninitialized 13:58:57 svc:/network/telnet:default
uninitialized 13:58:58 svc:/network/rpc-100235_1/rpc_ticotsord:default
uninitialized 13:58:58 svc:/network/rpc/cde-calendar-manager:default
uninitialized 13:58:59 svc:/network/rpc/cde-ttdbserver:tcp
bash-3.00# svcs -x
svc:/system/filesystem/local:default (local file system mounts)
State: maintenance since Wed Dec 15 15:34:43 2010
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-filesystem-local:default.log
Impact: 24 dependent services are not running. (Use -v for list.)
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Wed Dec 15 13:58:52 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: gssd(1M)
Impact: 11 dependent services are not running. (Use -v for list.)
svc:/network/rpc/rstat:default (kernel statistics server)
State: uninitialized since Wed Dec 15 13:58:55 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: rpc.rstatd(1M)
See: rstatd(1M)
Impact: 1 dependent service is not running. (Use -v for list.)
bash-3.00# cat /var/svc/log/system-filesystem-local:default.log
[ Jul 10 03:41:35 Enabled. ]
[ Jul 10 03:43:45 Rereading configuration. ]
[ Jul 10 03:44:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 03:44:18 Method "start" exited with status 0 ]
[ Jul 10 12:44:36 Enabled. ]
[ Jul 10 12:44:45 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:44:45 Method "start" exited with status 0 ]
[ Jul 10 12:45:03 Enabled. ]
[ Jul 10 12:45:09 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:45:09 Method "start" exited with status 0 ]
[ Jul 10 13:54:39 Enabled. ]
[ Jul 10 13:54:46 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 13:54:46 Method "start" exited with status 0 ]
[ Jul 18 12:34:19 Enabled. ]
[ Jul 18 12:34:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 12:34:27 Method "start" exited with status 0 ]
[ Jul 18 17:29:08 Enabled. ]
[ Jul 18 17:29:15 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 17:29:15 Method "start" exited with status 0 ]
[ Jul 19 11:13:34 Enabled. ]
[ Jul 19 11:13:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:13:42 Method "start" exited with status 0 ]
[ Jul 19 11:32:23 Enabled. ]
[ Jul 19 11:32:30 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:32:31 Method "start" exited with status 0 ]
[ Jul 19 11:57:06 Enabled. ]
[ Jul 19 11:57:13 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:57:13 Method "start" exited with status 0 ]
[ Jul 19 12:40:05 Enabled. ]
[ Jul 19 12:40:12 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 12:40:12 Method "start" exited with status 0 ]
[ Jul 20 15:51:46 Enabled. ]
[ Jul 20 15:51:54 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 20 15:51:54 Method "start" exited with status 0 ]
[ Jul 24 11:42:17 Enabled. ]
[ Jul 24 11:42:25 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 24 11:42:25 Method "start" exited with status 0 ]
[ Jul 27 12:05:06 Stopping because service disabled. ]
[ Jul 27 12:05:07 Executing stop method (null) ]
[ Jul 27 12:13:10 Enabled. ]
[ Jul 27 12:13:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 12:13:17 Method "start" exited with status 0 ]
[ Jul 27 13:10:26 Stopping because service disabled. ]
[ Jul 27 13:10:26 Executing stop method (null) ]
[ Jul 27 13:18:19 Enabled. ]
[ Jul 27 13:18:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 13:18:26 Method "start" exited with status 0 ]
[ Jul 31 10:12:31 Enabled. ]
[ Jul 31 10:12:38 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 31 10:12:39 Method "start" exited with status 0 ]
[ Aug 7 10:08:52 Stopping because service disabled. ]
[ Aug 7 10:08:52 Executing stop method (null) ]
[ Aug 7 10:34:50 Enabled. ]
[ Aug 7 10:34:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 7 10:34:58 Method "start" exited with status 0 ]
[ Aug 9 09:14:50 Stopping because service disabled. ]
[ Aug 9 09:14:50 Executing stop method (null) ]
[ Aug 9 09:55:03 Enabled. ]
[ Aug 9 09:55:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 9 09:55:11 Method "start" exited with status 0 ]
[ Aug 16 10:46:43 Enabled. ]
[ Aug 16 10:46:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 10:46:50 Method "start" exited with status 0 ]
[ Aug 16 12:06:56 Enabled. ]
[ Aug 16 12:07:02 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 12:07:02 Method "start" exited with status 0 ]
[ Aug 16 13:45:10 Enabled. ]
[ Aug 16 13:45:16 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 13:45:16 Method "start" exited with status 0 ]
[ Aug 16 14:36:59 Enabled. ]
[ Aug 16 14:37:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 14:37:07 Method "start" exited with status 0 ]
[ Aug 16 15:00:40 Enabled. ]
[ Aug 16 15:00:47 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 15:00:47 Method "start" exited with status 0 ]
[ Aug 22 16:00:13 Enabled. ]
[ Aug 22 16:00:21 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 22 16:00:21 Method "start" exited with status 0 ]
[ Aug 23 09:49:04 Enabled. ]
[ Aug 23 09:49:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 09:49:11 Method "start" exited with status 0 ]
[ Aug 23 09:49:23 Stopping because service disabled. ]
[ Aug 23 09:49:23 Executing stop method (null) ]
[ Aug 23 10:04:13 Enabled. ]
[ Aug 23 10:04:20 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:04:20 Method "start" exited with status 0 ]
[ Aug 23 10:06:57 Enabled. ]
[ Aug 23 10:07:04 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:07:05 Method "start" exited with status 0 ]
[ Oct 23 08:43:05 Enabled. ]
[ Oct 23 08:43:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 23 08:43:14 Method "start" exited with status 0 ]
[ Nov 21 14:51:50 Enabled. ]
[ Nov 21 14:51:58 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 21 14:51:59 Method "start" exited with status 0 ]
[ Nov 29 15:33:19 Enabled. ]
[ Nov 29 15:33:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 29 15:33:27 Method "start" exited with status 0 ]
[ Dec 18 13:37:35 Enabled. ]
[ Dec 18 13:37:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 18 13:37:42 Method "start" exited with status 0 ]
[ Dec 19 08:48:07 Enabled. ]
[ Dec 19 08:48:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:48:14 Method "start" exited with status 0 ]
[ Dec 19 08:56:07 Enabled. ]
[ Dec 19 08:56:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:56:14 Method "start" exited with status 0 ]
[ Dec 19 08:57:41 Enabled. ]
[ Dec 19 08:57:48 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:57:48 Method "start" exited with status 0 ]
[ Feb 1 10:39:48 Enabled. ]
[ Feb 1 10:39:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 1 10:39:56 Method "start" exited with status 0 ]
[ Feb 8 11:12:50 Enabled. ]
[ Feb 8 11:12:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 8 11:12:57 Method "start" exited with status 0 ]
[ Jun 6 10:08:34 Enabled. ]
[ Jun 6 10:08:44 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jun 6 10:08:46 Method "start" exited with status 0 ]
[ Aug 8 09:45:48 Enabled. ]
[ Aug 8 09:46:35 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 8 09:46:36 Method "start" exited with status 0 ]
[ Aug 14 17:53:59 Enabled. ]
[ Aug 14 17:54:06 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:54:06 Method "start" exited with status 0 ]
[ Aug 14 17:55:20 Enabled. ]
[ Aug 14 17:55:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:55:27 Method "start" exited with status 0 ]
[ Aug 18 15:19:17 Enabled. ]
[ Aug 18 15:19:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 18 15:19:24 Method "start" exited with status 0 ]
[ Aug 29 12:56:48 Enabled. ]
[ Aug 29 12:56:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 29 12:56:55 Method "start" exited with status 0 ]
[ Oct 13 11:59:43 Enabled. ]
[ Oct 13 11:59:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 13 11:59:51 Method "start" exited with status 0 ]
[ Feb 26 16:47:00 Enabled. ]
[ Feb 26 16:47:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 26 16:47:07 Method "start" exited with status 0 ]
[ Apr 14 15:54:17 Enabled. ]
[ Apr 14 15:54:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Apr 14 15:54:25 Method "start" exited with status 0 ]
[ Aug 28 08:49:58 Stopping because service disabled. ]
[ Aug 28 08:49:58 Executing stop method (null) ]
[ Aug 28 08:52:54 Enabled. ]
[ Aug 28 08:53:01 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 28 08:53:01 Method "start" exited with status 0 ]
[ Aug 28 09:08:20 Stopping because service disabled. ]
[ Aug 28 09:08:20 Executing stop method (null) ]
[ Sep 1 16:05:36 Enabled. ]
[ Sep 1 16:06:05 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 16:06:05 Method "start" exited with status 0 ]
[ Sep 1 19:29:19 Enabled. ]
[ Sep 1 19:29:27 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 19:29:27 Method "start" exited with status 0 ]
[ Sep 1 23:04:00 Enabled. ]
[ Sep 1 23:04:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 23:04:08 Method "start" exited with status 0 ]
[ Sep 2 00:23:41 Stopping because service disabled. ]
[ Sep 2 00:23:42 Executing stop method (null) ]
[ Sep 2 00:46:46 Enabled. ]
[ Sep 2 00:46:53 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 2 00:46:54 Method "start" exited with status 0 ]
[ Sep 26 12:04:34 Enabled. ]
[ Sep 26 12:04:41 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 26 12:04:42 Method "start" exited with status 0 ]
[ Oct 20 13:05:09 Stopping because service disabled. ]
[ Oct 20 13:05:10 Executing stop method (null) ]
[ Oct 20 13:24:01 Enabled. ]
[ Oct 20 13:24:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 20 13:24:09 Method "start" exited with status 0 ]
[ Oct 21 16:30:59 Enabled. ]
[ Oct 21 16:31:09 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:31:09 Method "start" exited with status 0 ]
[ Oct 21 16:32:42 Stopping because service disabled. ]
[ Oct 21 16:32:42 Executing stop method (null) ]
[ Oct 21 16:42:05 Enabled. ]
[ Oct 21 16:42:15 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:42:15 Method "start" exited with status 0 ]
[ Oct 21 17:27:37 Enabled. ]
[ Oct 21 17:27:47 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 17:27:47 Method "start" exited with status 0 ]
[ Oct 22 11:08:34 Enabled. ]
[ Oct 22 11:08:43 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 22 11:08:43 Method "start" exited with status 0 ]
[ Dec 9 09:17:33 Stopping because service disabled. ]
[ Dec 9 09:17:33 Executing stop method (null) ]
[ Dec 10 11:47:14 Enabled. ]
[ Dec 10 11:47:24 Executing start method ("/lib/svc/method/fs-local") ]
[ Dec 10 11:47:25 Method "start" exited with status 0 ]
[ Dec 15 10:52:25 Stopping because service disabled. ]
[ Dec 15 10:52:25 Executing stop method (null) ]
[ Dec 15 12:42:16 Enabled. ]
[ Dec 15 12:42:26 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 12:42:28 Method "start" exited with status 95 ]
[ Dec 15 13:13:19 Enabled. ]
[ Dec 15 13:13:28 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:13:30 Method "start" exited with status 95 ]
[ Dec 15 13:58:51 Enabled. ]
[ Dec 15 13:59:00 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:59:03 Method "start" exited with status 95 ]
[ Dec 15 15:34:41 Leaving maintenance because clear requested. ]
[ Dec 15 15:34:41 Enabled. ]
[ Dec 15 15:34:41 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 15:34:43 Method "start" exited with status 95 ]
bash-3.00# /usr/sbin/zfs mount -a
internal error: Unknown error
Abort (core dumped)
Before that I've installed the patch cluster with halted solaris zones which produced following output:
Application of patches finished : 2010.12.15 12:08:43
Following patches were applied :
119254-77 119812-10 125719-31 140159-03 142911-01
141588-04 119900-11 125731-05 142292-01 142933-02
142251-02 119906-16 126206-05 141444-09 142909-17
118666-28 120460-17 126363-08 141500-07 143140-04
118667-28 121012-03 126365-16 141502-02 143502-01
118777-16 121308-20 126868-04 141506-09 143506-01
140860-02 122212-40 127724-02 141514-02 143615-02
119059-56 122261-03 136998-09 141518-12 143731-01
119213-23 122675-05 137000-07 141552-03 143733-01
124628-10 123003-04 137080-05 141558-01 143977-01
119252-29 123590-12 137147-06 141586-01 144053-04
119280-23 123893-22 138195-04 141590-02 144106-01
124188-03 124393-11 138822-07 141874-09 144254-01
120199-15 124457-02 138826-07 141876-07 144488-04
119534-19 124630-42 138880-02 142084-04 144492-01
120272-28 125215-03 139099-04 142397-01 145124-01
119757-18 125388-03 139620-01 142529-01 145796-01
119783-15 125555-07
Following patches were skipped :
Patches already applied
120900-04 119063-01 119810-05 123005-07 137093-01
121133-02 119081-25 119986-03 124444-01 138866-03
119317-01 119130-33 120061-02 124939-03 137137-09
121296-01 123611-04 120201-05 124943-01 137871-02
138215-01 140899-01 120292-02 124997-01 138181-01
127884-01 122640-05 120329-02 125279-05 138361-01
118712-23 126897-02 121975-01 125539-06 138373-02
118918-24 127755-01 120719-02 125891-01 138647-01
138217-01 125503-02 120830-06 126440-01 141016-01
119578-30 125547-02 121095-02 126540-02 139555-08
121453-02 140796-01 121606-04 127127-11 139967-01
121453-02 120011-14 124171-07 136882-02 140455-01
121118-16 139520-02 123630-03 137032-01 140563-01
118833-36 119764-06
Patches obsoleted by one or more patches already applied
118731-01 124204-04 122660-10
Patches not applicable to packages on the system
121181-03 120410-33 121211-02 125533-15 143317-03
119115-35 120412-11 122259-03 125541-06 143510-01
119117-52 120414-27 122470-03 125952-20 143725-01
119315-19 120543-21 122911-24 137004-08 143727-01
119548-14 120739-06 122958-06 138387-01 143739-01
119903-02 120811-09 123938-02 138824-07 144325-01
120094-30 120849-04 125136-24 138876-01 145006-02
120185-21 121104-11 125137-24 139986-01 145080-01
119368-04 121136-02 125332-14 142244-02 145200-01
120286-03
Installation of patch set complete. PLEASE REBOOT THE SYSTEM.
when i tried to reboot the system by init 6 the service iscsi hanged and produced syslog errors about a unkown iocall -> killed the process. System rebooted w/o errors.
Does anyone have got an idea how to find out which patch or whatever do produce these errors?Hi,
I'm having the same issue of diskmon core dumps after upgrading grid and database from 11.2.0.1 to 11.2.0.2 on Solaris 10 x86-64. Following this thread, I'm trying to deinstall the Oracle 11.2.0.1 grid home.
I answered the following questions asked by the grid deinstall tool:
1. ASM configuration was not detected in this Oracle home. Was ASM configured in this Oracle home (y|n): y
2. Specify the ASM Diagnostic Destination: /db01/app/oracle/diag/asm/+ASM
3. Specify the diskgroups that are managed by this ASM instance: DATA FRA
4. De-configuring ASM will drop all the diskgroups at cleanup time. Do you want deconfig tool to drop the diskgroups:
If I answer no to question 1, the tool exits with error.
How do I answer question #4? (confused about this question of dropping diskgroups, it's already been upgraded)
Deinstall of Oracle db Home 11.2.0.1 was successful.
The +ASM instance has been upgraded and is running fine under 11.2.0.2 except for the excessive diskmon core dumps.
Thanks,
Lisa
Edited by: user12018917 on Apr 19, 2011 10:21 AM -
Hangs during boot after upgrading to Kernel 2.6.39
I have just installed Arch on a new computer. It works fine until I upgrade to Kernel 2.6.39. After that it hangs on boot.
The end of /var/log/everything.log is posted below.
Jul 26 23:52:06 localhost kernel: [ 6.036766] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0x85F3
Jul 26 23:52:06 localhost kernel: [ 6.129046] adt7475 1-002e: ADT7473 device, revision 1
Jul 26 23:52:06 localhost kernel: [ 6.138997] [drm] nouveau 0000:04:00.0: Detected monitoring device: adt7473
Jul 26 23:52:06 localhost kernel: [ 6.139000] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
Jul 26 23:52:06 localhost kernel: [ 6.139002] [drm] nouveau 0000:04:00.0: 0: memory 405MHz core 270MHz shader 540MHz
Jul 26 23:52:06 localhost kernel: [ 6.139233] [TTM] Zone kernel: Available graphics memory: 12371030 kiB.
Jul 26 23:52:06 localhost kernel: [ 6.139236] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
Jul 26 23:52:06 localhost kernel: [ 6.139238] [TTM] Initializing pool allocator.
Jul 26 23:52:06 localhost kernel: [ 6.139252] [drm] nouveau 0000:04:00.0: Detected 5376MiB VRAM
Jul 26 23:52:06 localhost kernel: [ 6.139260] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
Jul 26 23:52:06 localhost kernel: [ 6.150626] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
Jul 26 23:52:06 localhost kernel: [ 6.152371] [drm] nouveau 0000:04:00.0: failed to load fuc409d
Jul 26 23:52:06 localhost kernel: [ 6.176193] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Jul 26 23:52:06 localhost kernel: [ 6.176195] [drm] No driver support for vblank timestamp query.
Jul 26 23:52:06 localhost kernel: [ 6.228800] No connectors reported connected with modes
Jul 26 23:52:06 localhost kernel: [ 6.228802] [drm] Cannot find any crtc or sizes - going 1024x768
Jul 26 23:52:06 localhost kernel: [ 6.231002] [drm] nouveau 0000:04:00.0: allocated 1024x768 fb: 0x8020000, bo ffff880608d97800
Jul 26 23:52:06 localhost kernel: [ 6.233786] Console: switching to colour frame buffer device 128x48
Jul 26 23:52:06 localhost kernel: [ 6.235094] fb0: nouveaufb frame buffer device
Jul 26 23:52:06 localhost kernel: [ 6.235094] drm: registered panic notifier
Jul 26 23:52:06 localhost kernel: [ 6.235098] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
Jul 26 23:52:06 localhost kernel: [ 6.255449] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jul 26 23:52:06 localhost kernel: [ 6.255451] hda_intel: Disable MSI for Nvidia chipset
Jul 26 23:52:06 localhost kernel: [ 6.255599] HDA Intel 0000:04:00.1: setting latency timer to 64
Jul 26 23:52:06 localhost kernel: [ 7.663482] EXT4-fs (sda3): re-mounted. Opts: (null)
Jul 26 23:52:06 localhost kernel: [ 7.807508] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Jul 26 23:52:06 localhost kernel: [ 7.851401] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
Jul 26 23:52:06 localhost kernel: [ 8.569682] r8169 0000:08:00.0: eth0: link down
Jul 26 23:52:06 localhost kernel: [ 8.569687] r8169 0000:08:00.0: eth0: link down
Jul 26 23:52:06 localhost dhcpcd[747]: eth0: waiting for carrier
Jul 26 23:52:08 localhost dhcpcd[747]: eth0: carrier acquired
Jul 26 23:52:08 localhost kernel: [ 10.301736] r8169 0000:08:00.0: eth0: link up
Jul 26 23:52:08 localhost dhcpcd[747]: eth0: broadcasting for a lease
Jul 26 23:52:12 localhost dhcpcd[747]: eth0: offered 131.181.53.42 from 131.181.127.32
Jul 26 23:52:13 localhost dhcpcd[747]: eth0: acknowledged 131.181.53.42 from 131.181.59.48
Jul 26 23:52:13 localhost dhcpcd[747]: eth0: checking for 131.181.53.42
Jul 26 23:52:18 localhost dhcpcd[747]: eth0: leased 131.181.53.42 for 43200 seconds
Jul 26 23:52:18 localhost dhcpcd[747]: forked to background, child pid 774
Jul 26 23:52:18 localhost crond[823]: /usr/sbin/crond 4.5 dillon's cron daemon, started with loglevel info
Jul 26 23:53:01 localhost crond[823]: FILE /etc/cron.d/prune-cronstamps USER root PID 835 job prune-cronstamps
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 836 job sys-hourly
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 837 job sys-daily
Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 838 job sys-weekly
Any help fixing this would be greatly appreciated.I have been trying to isolate the problem a little further. I re-installed (with just the base and sudo) and after upgrading pacman rebooted and it worked without fail. Then I installed libusb and libusb-compat which where required when I tried to upgrade just the kernel using
pacman -S kernel26
which initially failed because of the missing dependencies libusb and libusb-compat. I then re-booted and that worked without a problem.
I then upgraded to Kernel 2.6.39 using the above command and then it hung on rebooting. I saved the logs at each stage.
The additional logs in errors.log in the reboot that failed are as follows.
ul 26 16:28:39 O313 kernel: [ 5.120698] [drm] nouveau 0000:04:00.0: Pointer to BIT loadval table invalid
Jul 26 16:28:39 O313 kernel: [ 5.360508] [drm] nouveau 0000:04:00.0: failed to load fuc409d
Jul 26 16:28:39 O313 kernel: [ 5.808016] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:39 O313 kernel: [ 5.809960] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:39 O313 kernel: [ 5.812116] sd 20:0:0:0: [sdb] Assuming drive cache: write through
Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
The end of kernel.log is as follows:
Sat Jul 9 14:57:41 CEST 2011
Jul 26 16:28:39 O313 kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/e4733c60-3e54-4001-a83e-415b690dfcb0 ro
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfed0000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cfed1000 (ACPI NVS)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed1000 - 00000000cfee0000 (ACPI data)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] NX (Execute Disable) protection: active
Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI 2.4 present.
Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD5/X58A-UD5, BIOS FD 02/01/2011
Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Jul 26 16:28:39 O313 kernel: [ 0.000000] No AGP bridge found
Jul 26 16:28:39 O313 kernel: [ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
And this is the end of daemon.log
Jul 26 16:27:49 O313 init: Switching to runlevel: 6
Jul 26 16:27:50 O313 dhcpcd: received SIGTERM, stopping
Jul 26 16:27:50 O313 dhcpcd: eth0: removing interface
Jul 26 16:28:39 O313 2.352592] udevd[87]: starting version 171
Jul 26 16:28:39 O313 4.531007] udevd[370]: starting version 171
Jul 26 16:28:39 O313 dhcpcd: version 5.2.2 starting
Jul 26 16:28:39 O313 dhcpcd: eth0: waiting for carrier
Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
Jul 26 16:28:39 O313 init: Entering runlevel: 3
Please let me know if any further information would be useful in tracking down this problem. Also ignore any timings in my initial post they were incorrect.
Last edited by TheStatsMan (2011-07-26 07:40:48) -
[Solved] Laptop hangs at boot.
Hi,
Since today, my laptop hangs at boot (after I input my password for disk encryption). If I boot without 'quiet' the last message is "Started LVM2 PV scan on device 254:0" as well as some messages about Bluetooth. After these, simply nothing happens.
The last change I made to my system before this problem started to occur was to patch xf86-input-synaptics with this patch for palm detection: https://gist.github.com/silverhammermba … caa63c86f1 I'm not sure if this is related, but I can't think of anything else I changed.
Is there a way I can at least get a shell so I can view dmesg output or try to revert to the default synaptics driver?
Regards,
wo0p
Last edited by wo0p (2015-06-19 21:06:53)Thanks, I managed to get to a shell using CTRL + ALT + F2. I was certain I tried that, but I might have been hitting CTRL + ALT + 2 the whole time, quite embarrassing...
Can I just revert to the repository version of xf86-input-synaptics by removing it with pacman -R and then reinstalling with pacman -S ? If so, this doesn't fix my problem.
I looked through dmesg and the journal but couldn't see any errors. Is there something I missed?
EDIT: Thanks for the help, I think the problem was that installing the package had created a config (with .pacnew) in the /etc/X11/xorg.conf.d/ directory which caused the problems.
I would still like to know if I can revert to the repository version of a package in the way I outlined above though.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.5-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c71d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c71da000-0x00000000c7541fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7542000-0x00000000caa82fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa83000-0x00000000caae1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caae2000-0x00000000cb2e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb2e4000-0x00000000cc46bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc46c000-0x00000000ccee4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccee5000-0x00000000ccffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd800000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xcb6e8000 ACPI 2.0=0xcb6e8000 SMBIOS=0xcce2d998
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f29000) (14MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f29000-0x0000000010000000) (240MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000010000000-0x000000001000b000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000001000b000-0x000000003675a000) (615MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003675a000-0x00000000373a5000) (12MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000373a5000-0x000000008da14000) (1382MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008da14000-0x00000000bf558000) (795MB)
[ 0.000000] efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf558000-0x00000000bf598000) (0MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bf598000-0x00000000c62f8000) (109MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000c62f8000-0x00000000c6316000) (0MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c6316000-0x00000000c71da000) (14MB)
[ 0.000000] efi: mem15: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c71da000-0x00000000c7542000) (3MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7542000-0x00000000c7548000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7548000-0x00000000c8419000) (14MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c8419000-0x00000000ca483000) (32MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ca483000-0x00000000ca7de000) (3MB)
[ 0.000000] efi: mem20: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ca7de000-0x00000000caa83000) (2MB)
[ 0.000000] efi: mem21: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000caa83000-0x00000000caae2000) (0MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000caae2000-0x00000000cb2da000) (7MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000cb2da000-0x00000000cb2e4000) (0MB)
[ 0.000000] efi: mem24: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cb2e4000-0x00000000cc46c000) (17MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cc46c000-0x00000000ccee5000) (10MB)
[ 0.000000] efi: mem26: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ccee5000-0x00000000ccfff000) (1MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ccfff000-0x00000000cd000000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000022f000000) (4848MB)
[ 0.000000] efi: mem29: [Reserved | | | | | | | | | ] range=[0x00000000cd800000-0x00000000d0000000) (40MB)
[ 0.000000] efi: mem30: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem32: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem33: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem34: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem35: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX303LNB/UX303LNB, BIOS UX303LNB.203 12/10/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 00C8000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 00CC000000 mask 7FFF000000 write-back
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back
[ 0.000000] 7 base 0230000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 022F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x22edfffff]
[ 0.000000] [mem 0x220000000-0x22edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc71d9fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc6ffffff] page 2M
[ 0.000000] [mem 0xc7000000-0xc71d9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc7542000-0xcaa82fff]
[ 0.000000] [mem 0xc7542000-0xc75fffff] page 4k
[ 0.000000] [mem 0xc7600000-0xca9fffff] page 2M
[ 0.000000] [mem 0xcaa00000-0xcaa82fff] page 4k
[ 0.000000] BRK [0x01b21000, 0x01b21fff] PGTABLE
[ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcaae2000-0xcb2e3fff]
[ 0.000000] [mem 0xcaae2000-0xcabfffff] page 4k
[ 0.000000] [mem 0xcac00000-0xcb1fffff] page 2M
[ 0.000000] [mem 0xcb200000-0xcb2e3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[ 0.000000] [mem 0xccfff000-0xccffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3675a000-0x373a4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CB6E8000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000CB6E80B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CB701590 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CB6E8218 019372 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CC469F80 000040
[ 0.000000] ACPI: APIC 0x00000000CB7016A0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CB701728 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CB701770 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000CB701810 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000CB7018D8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CB701918 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB701950 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000CB701C68 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CB701CB0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000CB702930 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CB7029D0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB702F10 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB703A88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB706CD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000CB707068 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB7070D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB707BA0 006622 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB70E1C8 0006CE (v02 SgRef SgPch 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000CB70E898 0000A8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000CB70E940 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CB70E978 001914 (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x00000000CAAE0E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22eff8000-0x22effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c71d9fff]
[ 0.000000] node 0: [mem 0x00000000c7542000-0x00000000caa82fff]
[ 0.000000] node 0: [mem 0x00000000caae2000-0x00000000cb2e3fff]
[ 0.000000] node 0: [mem 0x00000000ccfff000-0x00000000ccffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[ 0.000000] On node 0 totalpages: 2072250
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12925 pages used for memmap
[ 0.000000] DMA32 zone: 827166 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x24])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x48])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x49])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0x4c])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc71da000-0xc7541fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaa83000-0xcaae1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb2e4000-0xcc46bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc46c000-0xccee4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccee5000-0xccffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd800000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88022ec00000 s86232 r8192 d32552 u524288
[ 0.000000] pcpu-alloc: s86232 r8192 d32552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039847
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8015668K/8289000K available (5629K kernel code, 840K rwdata, 1784K rodata, 1160K init, 1152K bss, 273332K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.256 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.03 BogoMIPS (lpj=7980853)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20150204
[ 0.026322] ACPI: All ACPI Tables successfully acquired
[ 0.028669] Security Framework initialized
[ 0.028673] Yama: becoming mindful.
[ 0.029045] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030311] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030856] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031022] Initializing cgroup subsys blkio
[ 0.031024] Initializing cgroup subsys memory
[ 0.031029] Initializing cgroup subsys devices
[ 0.031030] Initializing cgroup subsys freezer
[ 0.031032] Initializing cgroup subsys net_cls
[ 0.031051] CPU: Physical Processor ID: 0
[ 0.031051] CPU: Processor Core ID: 0
[ 0.031056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.031056] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.031963] mce: CPU supports 7 MCE banks
[ 0.031974] CPU0: Thermal monitoring enabled (TM1)
[ 0.032002] process: using mwait in idle threads
[ 0.032005] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032006] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032281] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.033915] ftrace: allocating 21316 entries in 84 pages
[ 0.041185] dmar: Host address width 39
[ 0.041187] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.041194] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.041195] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.041199] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.041199] dmar: RMRR base: 0x000000cce3e000 end: 0x000000cce4cfff
[ 0.041200] dmar: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[ 0.041202] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.041203] HPET id 0 under DRHD base 0xfed91000
[ 0.041484] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.041495] Enabled IRQ remapping in xapic mode
[ 0.041496] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.042099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075131] TSC deadline timer enabled
[ 0.075133] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (fam: 06, model: 3d, stepping: 04)
[ 0.075153] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.075157] ... version: 3
[ 0.075158] ... bit width: 48
[ 0.075159] ... generic registers: 4
[ 0.075159] ... value mask: 0000ffffffffffff
[ 0.075160] ... max period: 0000ffffffffffff
[ 0.075161] ... fixed-purpose events: 3
[ 0.075161] ... event mask: 000000070000000f
[ 0.095289] x86: Booting SMP configuration:
[ 0.095291] .... node #0, CPUs: #1
[ 0.109467] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116159] #2 #3
[ 0.150974] x86: Booted up 1 node, 4 CPUs
[ 0.150977] smpboot: Total of 4 processors activated (19161.13 BogoMIPS)
[ 0.154621] devtmpfs: initialized
[ 0.156400] PM: Registering ACPI NVS region [mem 0xcb2e4000-0xcc46bfff] (18382848 bytes)
[ 0.156672] pinctrl core: initialized pinctrl subsystem
[ 0.156705] RTC time: 20:30:15, date: 06/19/15
[ 0.156793] NET: Registered protocol family 16
[ 0.167829] cpuidle: using governor ladder
[ 0.181188] cpuidle: using governor menu
[ 0.181212] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.181214] ACPI: bus type PCI registered
[ 0.181215] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.181275] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.181277] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.181347] PCI: Using configuration type 1 for base access
[ 0.194800] ACPI: Added _OSI(Module Device)
[ 0.194802] ACPI: Added _OSI(Processor Device)
[ 0.194803] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194804] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197821] ACPI : EC: EC description table is found, configuring boot EC
[ 0.200562] ACPI: Executed 8 blocks of module-level executable AML code
[ 0.206934] ACPI: Dynamic OEM Table Load:
[ 0.206939] ACPI: SSDT 0xFFFF880224F79000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.207792] ACPI: Dynamic OEM Table Load:
[ 0.207796] ACPI: SSDT 0xFFFF880224EFA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.208691] ACPI: Dynamic OEM Table Load:
[ 0.208695] ACPI: SSDT 0xFFFF880224F59800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.210219] ACPI: Interpreter enabled
[ 0.210227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.210234] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.210245] ACPI: (supports S0 S3 S4 S5)
[ 0.210246] ACPI: Using IOAPIC for interrupt routing
[ 0.210268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212136] ACPI: Power Resource [PG00] (on)
[ 0.212420] ACPI: Power Resource [PG01] (on)
[ 0.212693] ACPI: Power Resource [PG02] (on)
[ 0.213679] ACPI: Power Resource [PC05] (on)
[ 0.220550] ACPI: Power Resource [FN00] (off)
[ 0.220603] ACPI: Power Resource [FN01] (off)
[ 0.220655] ACPI: Power Resource [FN02] (off)
[ 0.220707] ACPI: Power Resource [FN03] (off)
[ 0.220759] ACPI: Power Resource [FN04] (off)
[ 0.221480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.221485] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.221893] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.222200] PCI host bridge to bus 0000:00
[ 0.222202] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.222204] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.222205] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.222206] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.222208] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.222209] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.222210] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.222211] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.222212] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.222213] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.222214] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.222215] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.222216] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[ 0.222222] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.222300] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.222309] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf5ffffff 64bit]
[ 0.222314] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.222318] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.222391] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.222397] pci 0000:00:03.0: reg 0x10: [mem 0xf721c000-0xf721ffff 64bit]
[ 0.222476] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.222486] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit]
[ 0.222580] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.222595] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.222648] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.222690] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.222719] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.222734] pci 0000:00:16.0: reg 0x10: [mem 0xf7224000-0xf722401f 64bit]
[ 0.222786] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.222854] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.222869] pci 0000:00:1b.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit]
[ 0.222918] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222959] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.222986] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.223048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.223089] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.223118] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.223184] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.223224] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.223250] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[ 0.223307] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.223348] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.223382] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.223542] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.223554] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.223559] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.223565] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.223571] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.223576] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.223582] pci 0000:00:1f.2: reg 0x24: [mem 0xf7222000-0xf72227ff]
[ 0.223613] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.223670] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.223682] pci 0000:00:1f.3: reg 0x10: [mem 0xf7221000-0xf72210ff 64bit]
[ 0.223697] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.223776] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.223805] pci 0000:00:1f.6: reg 0x10: [mem 0xf7220000-0xf7220fff 64bit]
[ 0.224013] acpiphp: Slot [1] registered
[ 0.224017] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.224292] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.224423] pci 0000:02:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
[ 0.224907] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.231440] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.231445] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.231518] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
[ 0.231534] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.231547] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.231561] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.231570] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.231579] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.231660] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.237972] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.237975] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.237977] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.237982] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.238138] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.239089] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.239130] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239209] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239247] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239323] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239770] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.239827] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.239900] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.239901] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.239903] vgaarb: loaded
[ 0.239904] vgaarb: bridge control possible 0000:00:02.0
[ 0.239990] PCI: Using ACPI for IRQ routing
[ 0.241093] PCI: pci_cache_line_size set to 64 bytes
[ 0.241127] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.241128] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.241129] e820: reserve RAM buffer [mem 0xc71da000-0xc7ffffff]
[ 0.241129] e820: reserve RAM buffer [mem 0xcaa83000-0xcbffffff]
[ 0.241130] e820: reserve RAM buffer [mem 0xcb2e4000-0xcbffffff]
[ 0.241131] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.241132] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.241211] NetLabel: Initializing
[ 0.241212] NetLabel: domain hash size = 128
[ 0.241213] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.241222] NetLabel: unlabeled traffic allowed by default
[ 0.241240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.241244] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.243265] Switched to clocksource hpet
[ 0.246853] pnp: PnP ACPI init
[ 0.246992] system 00:00: [io 0x0240-0x0259] has been reserved
[ 0.246995] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247057] pnp 00:01: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.247087] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.247149] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.247151] system 00:03: [io 0xffff] has been reserved
[ 0.247153] system 00:03: [io 0xffff] has been reserved
[ 0.247154] system 00:03: [io 0xffff] has been reserved
[ 0.247155] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.247156] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.247158] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247192] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247218] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.247220] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.247329] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.247330] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.247332] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.247334] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.247335] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.247336] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.247338] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.247339] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.247340] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.247341] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.247343] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.247344] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.247346] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247731] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248169] pnp: PnP ACPI: found 8 devices
[ 0.253940] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.253949] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.253952] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.253958] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.253960] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.253963] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.253966] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.253970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.253972] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.253973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.253974] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.253975] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.253976] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.253977] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.253979] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.253980] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.253981] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.253982] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.253983] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfeafffff window]
[ 0.253984] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.253986] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.253987] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.253988] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.254009] NET: Registered protocol family 2
[ 0.254153] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.254258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.254368] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.254382] TCP: reno registered
[ 0.254390] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.254411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.254449] NET: Registered protocol family 1
[ 0.254459] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.254627] PCI: CLS 64 bytes, default 64
[ 0.254658] Unpacking initramfs...
[ 0.419468] Freeing initrd memory: 12588K (ffff88003675a000 - ffff8800373a5000)
[ 0.419489] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.419492] software IO TLB [mem 0xc2316000-0xc6316000] (64MB) mapped at [ffff8800c2316000-ffff8800c6315fff]
[ 0.419632] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.419670] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419675] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419681] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419686] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419721] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.419738] Scanning for low memory corruption every 60 seconds
[ 0.419899] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.419912] Initialise system trusted keyring
[ 0.420141] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.421107] zpool: loaded
[ 0.421109] zbud: loaded
[ 0.421228] VFS: Disk quotas dquot_6.5.2
[ 0.421250] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.421369] Key type big_key registered
[ 0.421511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.421537] io scheduler noop registered
[ 0.421539] io scheduler deadline registered
[ 0.421558] io scheduler cfq registered (default)
[ 0.421962] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.421965] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.421974] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.421975] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.421977] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.421986] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.421987] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.421990] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.421994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.422004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.422016] efifb: probing for efifb
[ 0.422032] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
[ 0.422033] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.422034] efifb: scrolling: redraw
[ 0.422035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.425476] Console: switching to colour frame buffer device 240x67
[ 0.429197] fb0: EFI VGA frame buffer device
[ 0.429204] intel_idle: MWAIT substates: 0x11142120
[ 0.429205] intel_idle: v0.4 model 0x3D
[ 0.429205] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.429389] GHES: HEST is not enabled!
[ 0.429438] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.429759] Linux agpgart interface v0.103
[ 0.429798] rtc_cmos 00:04: RTC can wake from S4
[ 0.429904] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.429928] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.429937] Intel P-state driver initializing.
[ 0.430057] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.430573] TCP: cubic registered
[ 0.430824] NET: Registered protocol family 10
[ 0.431247] NET: Registered protocol family 17
[ 0.431931] Loading compiled-in X.509 certificates
[ 0.431964] registered taskstats version 1
[ 0.433023] Magic number: 3:29:549
[ 0.433038] clockevents clockevent0: hash matches
[ 0.433067] acpi PNP0C0F:00: hash matches
[ 0.433191] rtc_cmos 00:04: setting system clock to 2015-06-19 20:30:16 UTC (1434745816)
[ 0.433387] PM: Hibernation image not present or could not be loaded.
[ 0.434000] Freeing unused kernel memory: 1160K (ffffffff818d4000 - ffffffff819f6000)
[ 0.434003] Write protecting the kernel read-only data: 8192k
[ 0.434643] Freeing unused kernel memory: 504K (ffff880001582000 - ffff880001600000)
[ 0.434865] Freeing unused kernel memory: 264K (ffff8800017be000 - ffff880001800000)
[ 0.441392] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.458172] sdhci: Secure Digital Host Controller Interface driver
[ 0.458174] sdhci: Copyright(c) Pierre Ossman
[ 0.461368] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.464831] i8042: Detected active multiplexing controller, rev 1.1
[ 0.466075] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.466090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.466093] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.466095] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.466097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.467331] ACPI: bus type USB registered
[ 0.467357] usbcore: registered new interface driver usbfs
[ 0.467367] usbcore: registered new interface driver hub
[ 0.467449] usbcore: registered new device driver usb
[ 0.467882] SCSI subsystem initialized
[ 0.469036] libata version 3.00 loaded.
[ 0.469212] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.469219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.469295] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.469300] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.469567] hub 1-0:1.0: USB hub found
[ 0.469579] hub 1-0:1.0: 11 ports detected
[ 0.472290] AVX2 version of gcm_enc/dec engaged.
[ 0.472292] AES CTR mode by8 optimization enabled
[ 0.473751] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.473755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.473912] hub 2-0:1.0: USB hub found
[ 0.473922] hub 2-0:1.0: 4 ports detected
[ 0.475776] ahci 0000:00:1f.2: version 3.0
[ 0.486870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.486873] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.487298] scsi host0: ahci
[ 0.487404] scsi host1: ahci
[ 0.487499] scsi host2: ahci
[ 0.487602] scsi host3: ahci
[ 0.487645] ata1: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222100 irq 46
[ 0.487646] ata2: DUMMY
[ 0.487647] ata3: DUMMY
[ 0.487648] ata4: DUMMY
[ 0.518177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.807120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.808148] ata1.00: ATA-9: SanDisk SD7SB3Q256G1002, X2150000, max UDMA/133
[ 0.808151] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.809886] ata1.00: configured for UDMA/133
[ 0.810105] scsi 0:0:0:0: Direct-Access ATA SanDisk SD7SB3Q2 0000 PQ: 0 ANSI: 5
[ 0.811845] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.811926] sd 0:0:0:0: [sda] Write Protect is off
[ 0.811929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.811949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.813282] sda: sda1 sda2 sda3
[ 0.813602] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.833270] device-mapper: uevent: version 1.0.3
[ 0.833364] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
[ 0.833785] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.207444] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 1.381488] usb 1-8: No LPM exit latency info found, disabling LPM.
[ 1.420941] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 2.422042] Switched to clocksource tsc
[ 4.601817] NET: Registered protocol family 38
[ 5.500920] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.557255] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 5.557386] systemd[1]: Detected architecture 'x86-64'.
[ 5.557569] systemd[1]: Set hostname to <WOOP-PLUTO>.
[ 5.581258] systemd[1]: Unit type .busname is not supported on this system.
[ 5.609266] systemd[1]: Cannot add dependency job for unit vmware-USBArbitrator.service, ignoring: Unit vmware-USBArbitrator.service failed to load: No such file or directory.
[ 5.609648] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.609656] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.609676] systemd[1]: Reached target Login Prompts.
[ 5.609681] systemd[1]: Starting Login Prompts.
[ 5.609691] systemd[1]: Reached target Remote File Systems.
[ 5.609695] systemd[1]: Starting Remote File Systems.
[ 5.609816] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.609824] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.609831] systemd[1]: Reached target Encrypted Volumes.
[ 5.609836] systemd[1]: Starting Encrypted Volumes.
[ 5.610016] systemd[1]: Created slice Root Slice.
[ 5.610022] systemd[1]: Starting Root Slice.
[ 5.610045] systemd[1]: Listening on udev Control Socket.
[ 5.610051] systemd[1]: Starting udev Control Socket.
[ 5.610064] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.610069] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.610116] systemd[1]: Created slice User and Session Slice.
[ 5.610121] systemd[1]: Starting User and Session Slice.
[ 5.610163] systemd[1]: Created slice System Slice.
[ 5.610171] systemd[1]: Starting System Slice.
[ 5.610222] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.610228] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.610271] systemd[1]: Created slice system-rfkill\x2dblock.slice.
[ 5.610276] systemd[1]: Starting system-rfkill\x2dblock.slice.
[ 5.610318] systemd[1]: Created slice system-getty.slice.
[ 5.610323] systemd[1]: Starting system-getty.slice.
[ 5.610340] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.610345] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.610365] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.610370] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.612312] random: nonblocking pool is initialized
[ 5.620499] systemd[1]: Listening on Journal Audit Socket.
[ 5.620536] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.620543] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.620550] systemd[1]: Reached target Slices.
[ 5.620555] systemd[1]: Starting Slices.
[ 5.620589] systemd[1]: Listening on Journal Socket.
[ 5.620598] systemd[1]: Starting Journal Socket.
[ 5.620608] systemd[1]: Started File System Check on Root Device.
[ 5.620937] systemd[1]: Mounting Debug File System...
[ 5.621251] systemd[1]: Mounting Huge Pages File System...
[ 5.621859] systemd[1]: Started Load Kernel Modules.
[ 5.621874] systemd[1]: Mounted FUSE Control File System.
[ 5.622224] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.622646] systemd[1]: Starting Apply Kernel Variables...
[ 5.623622] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.623961] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.624013] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.624026] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.624427] systemd[1]: Starting Journal Service...
[ 5.624747] systemd[1]: Mounting Configuration File System...
[ 5.625120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.625185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.625194] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.625202] systemd[1]: Reached target Paths.
[ 5.625207] systemd[1]: Starting Paths.
[ 5.625476] systemd[1]: Starting Setup Virtual Console...
[ 5.625513] systemd[1]: Listening on udev Kernel Socket.
[ 5.625525] systemd[1]: Starting udev Kernel Socket.
[ 5.625917] systemd[1]: Starting udev Coldplug all Devices...
[ 5.626783] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.626862] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 214 (systemd-binfmt)
[ 5.627145] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 5.631100] systemd[1]: Started Setup Virtual Console.
[ 5.637366] systemd[1]: Started Apply Kernel Variables.
[ 5.638348] systemd[1]: Mounted Huge Pages File System.
[ 5.638376] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.638392] systemd[1]: Mounted Configuration File System.
[ 5.639302] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 5.639530] systemd-journald[216]: Failed to set file attributes: Inappropriate ioctl for device
[ 5.640253] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 5.640287] systemd[1]: Mounted Debug File System.
[ 5.642518] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.642721] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.642901] systemd[1]: Started udev Coldplug all Devices.
[ 5.650745] systemd[1]: Starting Load/Save Random Seed...
[ 5.650775] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 5.651626] systemd[1]: Started Rebuild Hardware Database.
[ 5.651645] systemd[1]: Started First Boot Wizard.
[ 5.651659] systemd[1]: Started Create System Users.
[ 5.651982] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.655137] systemd[1]: Started Load/Save Random Seed.
[ 5.673398] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.673906] systemd[1]: Starting udev Kernel Device Manager...
[ 5.673930] systemd[1]: Reached target Local File Systems (Pre).
[ 5.673941] systemd[1]: Starting Local File Systems (Pre).
[ 5.674530] systemd[1]: Mounting /tmp...
[ 5.676222] systemd[1]: Mounted /tmp.
[ 5.714702] systemd[1]: Started udev Kernel Device Manager.
[ 5.731901] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.732762] ACPI: Lid Switch [LID]
[ 5.732815] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 5.732819] ACPI: Sleep Button [SLPB]
[ 5.732867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.732870] ACPI: Power Button [PWRF]
[ 5.735236] systemd[1]: Started Journal Service.
[ 5.739454] ACPI: AC Adapter [AC0] (off-line)
[ 5.740472] systemd-journald[216]: Received request to flush runtime journal from PID 1
[ 5.741401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791768] [drm] Initialized drm 1.1.0 20060810
[ 5.797640] ACPI: Battery Slot [BAT0] (battery present)
[ 5.797836] wmi: Mapper loaded
[ 5.824171] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.845805] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 5.846099] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 5.846103] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.846105] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 5.846107] sound hdaudioC1D0: mono: mono_out=0x0
[ 5.846108] sound hdaudioC1D0: inputs:
[ 5.846111] sound hdaudioC1D0: Internal Mic=0x1a
[ 5.846113] sound hdaudioC1D0: Mic=0x19
[ 5.846718] sound hdaudioC1D0: Enable sync_write for stable communication
[ 5.846766] [drm] Memory usable by graphics device = 4096M
[ 5.846770] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 5.846773] fb: switching to inteldrmfb from EFI VGA
[ 5.846791] Console: switching to colour dummy device 80x25
[ 5.846944] [drm] Replacing VGA console driver
[ 5.849342] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
[ 5.849463] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 5.849490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 5.855615] thermal LNXTHERM:00: registered as thermal_zone2
[ 5.855618] ACPI: Thermal Zone [THRM] (48 C)
[ 5.858016] thermal LNXTHERM:01: registered as thermal_zone3
[ 5.858018] ACPI: Thermal Zone [TZ00] (28 C)
[ 5.858296] thermal LNXTHERM:02: registered as thermal_zone4
[ 5.858298] ACPI: Thermal Zone [TZ01] (30 C)
[ 5.858483] cfg80211: Calling CRDA to update world regulatory domain
[ 5.862994] Bluetooth: Core ver 2.20
[ 5.863009] NET: Registered protocol family 31
[ 5.863010] Bluetooth: HCI device and connection manager initialized
[ 5.863015] Bluetooth: HCI socket layer initialized
[ 5.863018] Bluetooth: L2CAP socket layer initialized
[ 5.863024] Bluetooth: SCO socket layer initialized
[ 5.866422] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 5.867516] Intel(R) Wireless WiFi driver for Linux
[ 5.867518] Copyright(c) 2003- 2014 Intel Corporation
[ 5.867886] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.867888] [drm] Driver supports precise vblank timestamp query.
[ 5.868042] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.870016] usbcore: registered new interface driver btusb
[ 5.877889] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
[ 5.880266] intel_rapl: Found RAPL domain package
[ 5.880269] intel_rapl: Found RAPL domain core
[ 5.880272] intel_rapl: Found RAPL domain uncore
[ 5.880274] intel_rapl: Found RAPL domain dram
[ 5.882922] media: Linux media interface: v0.10
[ 5.884691] Bluetooth: hci0: read Intel version: 370810011002270d00
[ 5.886215] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
[ 5.918064] Linux video capture interface: v2.00
[ 5.921474] iTCO_vendor_support: vendor-support=0
[ 5.922849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.922892] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 5.922978] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.923412] asus_wmi: ASUS WMI generic driver loaded
[ 5.930495] fbcon: inteldrmfb (fb0) is primary device
[ 5.932627] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x184
[ 5.933078] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.933238] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.933985] asus_wmi: Initialization: 0x1
[ 5.934961] asus_wmi: BIOS WMI version: 7.9
[ 5.935116] asus_wmi: SFUN value: 0xa2077
[ 5.936702] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 5.937631] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.937749] Adding 8388604k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:8388604k SSFS
[ 5.938748] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 5.941016] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 5.943447] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[ 5.945744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[ 5.945833] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150204/video-1257)
[ 5.945834] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 5.945879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input18
[ 5.945995] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.945999] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 5.946115] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150204/utaddress-254)
[ 5.946120] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 5.946121] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.949372] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 5.949434] usbcore: registered new interface driver uvcvideo
[ 5.949435] USB Video Class driver (1.1.1)
[ 6.030252] usb 1-8: USB disconnect, device number 3
[ 6.030362] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19)
[ 6.030393] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 6.030780] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 6.030895] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 6.030945] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.031170] asus_wmi: Backlight controlled by ACPI video driver
[ 6.032320] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.036491] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 6.054693] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15
[ 6.056212] mousedev: PS/2 mouse device common for all mice
[ 6.497765] bbswitch: version 0.8
[ 6.497769] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 6.497773] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
[ 6.497783] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 6.497854] bbswitch: detected an Optimus _DSM function
[ 6.497904] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
[ 6.499057] bbswitch: disabling discrete graphics
[ 6.499065] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 6.794166] /dev/vmmon[384]: Module vmmon: registered with major=10 minor=165
[ 6.794169] /dev/vmmon[384]: Module vmmon: initialized
[ 6.816392] Guest personality initialized and is inactive
[ 6.816436] VMCI host device registered (name=vmci, major=10, minor=56)
[ 6.816437] Initialized host personality
[ 6.847875] NET: Registered protocol family 40
[ 6.870900] fuse init (API version 7.23)
[ 6.898024] ppdev: user-space parallel port driver
[ 7.106012] Console: switching to colour frame buffer device 240x67
[ 7.110124] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.110125] i915 0000:00:02.0: registered panic notifier
[ 7.148418] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 7.148675] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 7.159323] /dev/vmnet: open called by PID 505 (vmnet-bridge)
[ 7.159334] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 7.159355] /dev/vmnet: port on hub 0 successfully opened
[ 7.159363] bridge-wlp2s0: device is wireless, enabling SMAC
[ 7.159366] bridge-wlp2s0: up
[ 7.159370] bridge-wlp2s0: attached
[ 7.161385] bridge-wlp2s0: disabling the bridge
[ 7.172268] bridge-wlp2s0: down
[ 7.172274] bridge-wlp2s0: detached
[ 7.549177] cfg80211: Calling CRDA to update world regulatory domain
[ 7.631166] /dev/vmnet: open called by PID 526 (vmnet-netifup)
[ 7.631172] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 7.631183] /dev/vmnet: port on hub 1 successfully opened
[ 7.649431] /dev/vmnet: open called by PID 528 (vmnet-dhcpd)
[ 7.649442] /dev/vmnet: port on hub 1 successfully opened
[ 7.659803] /dev/vmnet: open called by PID 536 (vmnet-natd)
[ 7.659810] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 7.659822] /dev/vmnet: port on hub 8 successfully opened
[ 7.662044] /dev/vmnet: open called by PID 537 (vmnet-netifup)
[ 7.662051] /dev/vmnet: port on hub 8 successfully opened
[ 7.672419] /dev/vmnet: open called by PID 542 (vmnet-dhcpd)
[ 7.672431] /dev/vmnet: port on hub 8 successfully opened
[ 8.032979] Bluetooth: hci0 command 0xfc8e tx timeout
[ 8.033056] Bluetooth: hci0 sending frame failed (-19)
[ 8.140139] cfg80211: Calling CRDA to update world regulatory domain
[ 10.041263] Bluetooth: hci0 command 0xfc11 tx timeout
[ 16.036148] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
[ 421.253320] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[ 421.429257] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 421.429265] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 421.439571] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 421.439662] scsi host4: usb-storage 1-1:1.0
[ 421.439732] usbcore: registered new interface driver usb-storage
[ 421.440704] usbcore: registered new interface driver uas
[ 422.802584] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 4
[ 422.803405] sd 4:0:0:0: [sdb] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 422.804030] sd 4:0:0:0: [sdb] Write Protect is off
[ 422.804039] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 422.804680] sd 4:0:0:0: [sdb] No Caching mode page found
[ 422.809996] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 422.816610] sdb:
[ 422.818457] sd 4:0:0:0: [sdb] Attached SCSI removable disk
-- Logs begin at Sat 2015-05-02 12:41:07 CEST, end at Fri 2015-06-19 22:40:49 CEST. --
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Runtime journal is using 8.0M (max allowed 394.6M, trying to leave 591.9M free of 3.8G available → current limit 394.6M).
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Permanent journal is using 1.4G (max allowed 4.0G, trying to leave 4.0G free of 120.7G available → current limit 4.0G).
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Time spent on flushing to /var is 31.618ms for 2 entries.
Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpuset
Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpu
Jun 19 22:30:21 WOOP-PLUTO kernel: Initiali -
Hello,
I have a 2-cpu, dual-core, opteron 270 based Arima HDAMA machine. It hangs on boot 4 out of 5 times, but if it starts, it is rock solid for days. If it hangs, it is most often after the following message:
workaround applied for cpu issue #6323525
This message is ejected after initialisation of the last core (core 3 starting the count at 0).
Does anyone have a suggestion what I could do?
Thanks,
Oliveros10000 wrote:
Hello,
I have a 2-cpu, dual-core, opteron 270 based Arima HDAMA machine. It hangs on boot 4 out of 5 times, but if it starts, it is rock solid for days. If it hangs, it is most often after the following message:
workaround applied for cpu issue #6323525
This message is ejected after initialisation of the last core (core 3 starting the count at 0).This might suggest that you have an entry in the /etc/system file and the comment is not using a '*'. Check the /etc/system file for that text and if it's in there, verify the integrity of the file itself. If it's not in the system file then there's probably a script somewhere that echo's that statement.
Bug ID 6323525 - "Mutual exclusion primitives don't work as expected" was fixed with Solaris 10 update 1 (about 5yrs ago) so if you're running anything higher than Kernel patch 118822-30 (SPARC) or 118844-30 (x86) then the workaround is no longer required.
Does anyone have a suggestion what I could do?1) Correct any typo's in /etc/system, if they exist
2) If the system boots, check the SMF logs to see if you can identify which SMF service was trying to start when the system hung (assuming we got this far in the boot process). SMF logs can be found in /var/svc/log, and you'll need identify those files which include the date/time of the failed boot.
3) Collect a crash dump when the system appears hung. Raise a support call and we (Kernel Team) can review the crash dump to establish what the system was waiting for during the boot process. See Doc ID: 1003085.1 - "Solaris[TM] Operating System: Forcing a kernel core dump on an x86 or x64 system" for instructions for collecting the crash dump.
Hope it helps,
Steve -
How to find out the info regarding Solaris, server hang or shutdown.
Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
INo core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that. -
Tuxedo 8.0 32-bit on Solaris 8 64-bit ( boot-mode)
Hi:
i have questions :
I have Tuxedo 8.0 32-bit product, i'll need run on solaris 8
( 64-bit boot-mode ) .
Is there Problems wiht that???
My hardware is :
Sun Microsystems sun4u
Sun Enterprise 420R (2 X UltraSPARC-II 450MHz)
System clock frequency: 113 MHz
Memory size: 2048 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 1 1 450 4.0 US-II 10.0
0 2 2 450 4.0 US-II 10.0
mymachine#isainfo -v
64-bit sparcv9 applications
32-bit sparc applications
thanks ...
Alex ...Hi Anthony :
Do you know something about performace between
Tuxedo 32-bit and Tuxedo 64-bit ?
Thanks ...
Alex ...
Do you working in Bea or other Enterprise ??
"Anthony Fryer" <[email protected]> wrote:
>
Hi Alex, we are also using tuxedo 32-bit on Solaris 64-bit operating
system. There
is no problem doing this as your solaris version supports both 32 bit
and 64 bit
programs. The things to watch out for are when you are building a tuxedo
application,
you have to make sure that all the libraries you link with are also 32
bit libraries,
including oracle. We ran into build problems when some libraries were
32 bit
and others were 64 bit.
There's good information about 32bit v 64bit on solaris at the following
web site...
http://docs.sun.com/?p=/doc/806-6543/6jffrdmee&a=view
I personally would use 64bit if possible, but it's no big deal to build
32 bit
applications because my tuxedo application does not need a 64bit address
space
and is not computationally heavy. Most of the CPU takes place in the
database,
which in our case is Oracle, and which happens to be 64bit anyway. So
it's not
a bad thing to build a 32 bit tuxedo application that runs on a 64 bit
operating
system, for most types of tuxedo applications.
"alex fuentes" <[email protected]> wrote:
Hi again :
you link show that :
Sun Solaris 8 tuxedo v8.0 Native 64-bit version - SPARC
Sun Solaris 8 SPARC X *(using 2.7 32-bit binaries)
32-bit on 64-bit OS supported
Then Tuxedo 8.0 32.bit ruuning on Solaris 8 64-bit. OK
there is support from Bea . Is that is correct ???
I'll need used Tuxedo 64-bit ,you could benefit in performance.
Thanks Thanks ...
Alex ..
Scott Orshan <[email protected]> wrote:
If the platform list shows that a 32-bit build is certified on a 64bit
OS, then you can run it there.
If you want an actual 64 bit build, it is because you want the big
address space, longer longs in FML, and everything else you get from
64
bits.
If you want to have an application span Solaris and Digital UNIX, which
is always 64 bit, you might want both to be 64 bits so that you do
not
lose any data in the conversion.
On HP, you can't link 32-bit Tuxedo with another product that is 64-bit
(Oracle for example). You might need a 64 bit Tuxedo in order to work
with other products.
Scott Orshan
alex fuentes wrote:
HI :
I have Tuxedo 8.0 32-bit for solaris, my questions is :
Is there problems whith Tuxedo 8.0 32-bit running on Solaris 8 alsorunning 64-bit
( boot-mode )?
there is a Tuxedo 8.0 64-bit Why ??
Which different between Tuxedo 8.0 32-bit and 64-bit ??
Thanks ....
Alex .. -
Oracle licensing in Solaris zones
Hi all,
I've read a few documents about Oracle licensing :
http://www.sun.com/third-party/global/oracle/consolidation/Containers_Oracle_041305.pdf
http://www.oracle.com/corporate/pricing/partitioning.pdf
However, there's one thing not clear to me. In Solaris zones, you dedicate threads (usually referred to as 'CPU' on Solaris) to zones. Oracle licensing is always about the number of cores used by the partition, not the number of threads. How do you convert from threads to cores?
I'll give an example:
A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
I can think of two ways of calculating the number of cores used:
1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
Can anyone help me figuring this out?
Thanks!
Regards,
MathieuHi Dezutterm,
I'm not a sales guy, but from how I understand things... you've already figured it out yourself:
dezutterm wrote:
I'll give an example:
A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
I can think of two ways of calculating the number of cores used:
1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
Can anyone help me figuring this out?Like you've seen, Oracle cares about how many cores are running Oracle software, not threads (from "Processor" definition here: http://www.oracle.com/corporate/pricing/technology-price-list.pdf). If you have 2 cores running Oracle software, you take "2" and multiple by the Core Processor Licensing Factor for that model of CPU (http://www.oracle.com/corporate/contracts/library/processor-core-factor-table.pdf) which for a T2 is 0.25... meaning you need 2 x 0.25 = 0.5 processor licenses. If you would have used both threads from the same core, you would need 0.25.
If this isn't correct, somebody please let us know, thanks!
[email protected] -
Solaris 8 for intel boot disk.
My Solaris 8 for intel boot disk was delivered to me corrupted and will not boot in serveral of my machines, how do I go about creating another one or should I request a replacement. Thanks.
Hi
This is Raghu from Hyderabad, India
you can download bootdisk creation files from following site.
http://soldc.sun.com/support/drivers/dca_diskettes/
try in with this URL it may be help you out.
please give me reply
Raghu -
Does Solaris 8 have a boot manager?
I would like to install Solaris 8 in a separate partition on a machine that already has Windows 98 in one partition, then be able to boot either Windows or Solaris. Does Solaris 8 have a dual boot manager, like lilo for Linux? I didn't see any mention of this in the installation docs.
WinNT / Solaris 8 dual boot - I have two drives on a Dell OptiPlex. WinNT is on the first drive and want to run Solaris from the second drive. After multiple successful interactive installs from the Solaris CD 1 of 2, I am still not able to boot to Solaris. I have tried Partition Magic v4.01 and System Commander as well as Solaris 8's boot manager. These attempts have resulted either in partitions that could not be managed by FDISK, WinNT Disk Admin, or Partition Manager or a corrupted boot sector.
I would like to have WinNT on the first HD (Disk 0) and Solaris 8 on the second HD (Disk 1). At this point I'd prefer to use WinNT's BOOT.INI file to point the boot sector to Solaris 8 on Disk 1, but regardless prefer not to have any Solaris partitions or its boot manager, if its is needed, on Disk 0.
Any help with this straightforward configuration is appreciated?
Richard Miles
[email protected] -
Can EM12c Cloud Control agent be installed in a solaris zone?
Can EM12c Cloud Control agent be installed in a solaris zone?
If so, are Solaris 8 and Solaris 9 zones supported?
thanksYes we can...
Solaris 9 is supported...I have installed agents on solaris 9 and 10 -
Solaris 10 can not boot; disks drive offline
hi, solaris 10 can not boot the operating system has 10 luns and this enabled the multipathing, he settled patches and reboot the computer does not start showing me the following errors:
WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1f (ssd0): drive offline
WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1e (ssd3): drive offline
WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1d (ssd5): drive offline
into failsafe mode and slow 2 days in, I try to see the running operating system disk format and takes the response format and shows me the following errors:
# format
Searching for disks...WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1f (ssd0): drive offline
WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1e (ssd3): drive offline
WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1d (ssd5): drive offline
hba ports have been connected
# luxadm -e port
/devices/pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0:devctl CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl CONNECTED
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 fc-fabric connected configured unknown
c2::203400a0b875837d disk connected configured unknown
c3 fc-fabric connected configured unknown
c3::202400a0b875837d disk connected configured unknown
cfgadm -al command output c2 and c3 appears has been connected and configured, because luns in the format output informs me that disks have state drive offline?
any idea.Hi--
Can you list the steps that lead this problem, please?
The drive offline message is a symptom of some kind of connection or underlying hardware problem.
If there were no system changes that lead to this problem, then I would look for connection or hardware issues.
Thanks, Cindy -
EM 12c and Solaris Zone Monitoring
Hi all,
I am using Oracle EM 12c to monitor Oracle database server which run on Solaris zone, which is capped to run using only 4 cores.
BUT the Host management home page is still showing "Total Cores" of 8 (I am using Sun T4-1).
Is there some configuration which required to be done to reflect the number of capped CPU.
Also is there a way to isolate the CPU, Memory, Filesystem and Network utilization to only look at the local zone?
I suspect what I see now represent the resource utilization of the physical machine.
Thank you.
-JoelLoc,
I've opened quite a few SRs, some handled well, some not. My biggest issue perhaps is that SRs are needed at all. We are a small shop that relied on OEM 10.2 for a long time, skipped over 11G and went right to 12R2. It was a culture shock, and I'm not sure if skipping the version added to our woes.
There are 3 DBAs here, with Oracle experience between 13 and 18 years, we are not newbies. I took the em12c class from Oracle.
But still, acceptance of its use has not been high, mostly because it's no longer the quick, targeted place we 'go to'. It's a huge product now, with much built-in. We are finding we need a mind adjustment to use it and the transition period related to how much time we can spend on that. Our intent, though, was to make things easier, not harder.
Case in point is our implementation of DataGuard. This project was new to us and I made EM12C upgrade as a predecessor project because I needed its help. I ultimately abandoned it, we hired a consultant, we learned manual steps, and that's what we use today. Everything is homegrown.
I feel as through the purpose for EM moved from a DBA monitoring tool. Remember OEM 10.2 and its initial summary page that showed the overall health of everything on one shot? I can't do that in em12c, or at least haven't found that.
Here are some SRs:
SR 3-6392247151
Sr 3-7159111371
SR 3-6645421051
* SR 3-6608820051
SR 3-6667182071
* Covers "invalid objects" missing, something we previously relied on.
Back to the original question of this post - I understand now that if we use EM to switch our databases, the role reversal will show. We would have loved to rely on EM for everything. Now that we must do everything manually, I have to then manually drop the target being monitored and re-add it. Again, something that should make our jobs easier is now harder.
Thanks for listening. Am I really the only DBA that says EM12C is harder to use for basic functionality?
Sherrie -
SAP Java and Solaris Zones SolMan 4.0
May require Solaris Zones experience to continue.
I have three SAP database instances/central instances running in three sparse Solaris zones with no problem.
I have created a new sparse zone for a new SAP installation (Solution Manager 4.0) and started the installation. SAP requires a 1.4.2 SDK even though Java 1.5 comes with Solaris 10. The 1.4.2 SDK is in /usr/j2se. The installation in the sparse zone errors out because it can't get "write" rights to /usr/j2se/jre/lib/security/local_policy.jar as it is trying to install some security encryption JCE component.
I have thought about creating a /usr/j2se_zonename file system, copying the contents of /usr/j2se into it and then mounting /usr/j2se_zonename in the zone as a lofs with the name /usr/j2se. However when I do the copy of /usr/j2se I get some recursion errors.
Any thoughts about how to add a writable /usr/j2se into the sparse zone with the least amount of effort ? Otherwise plan B would be to create a "large" zone with a writable /usr directory.
Received a great answer, that while it may not be architecturally "pure" it may get the job done.
You might just download the relevant JDK tarball and unpack that
somewhere in your zone (anywhere you like), and point SAP at it...
http://java.sun.com/j2se/1.4.2/download.html
Get the one called "self extracting file"-- you can unpack that anywhere
you want.
Message was edited by: Atis PurinsHi Russ,
no you only have to generate two RFCs to your R/3 and assign them in SMSY to for system monitoring
Then you need a Solution, assign your R/3 to the Solution, setup the system monitoring.
Regards,
uDo
Maybe you are looking for
-
How to downlaod the complete table contents
Hi, I have got one Z table which has got around 108 columns/field ...now I need to download the contents/data of the table in a spreadsheet with all the fields and also need to download the fields of the table in the other spreadsheet. so can you ple
-
Java.lang.NoSuchMethodError: getMailcapList
Hi, I am trying to use the javax.mail service. I am getting the following exception on the code "Transport.send(msg);". Could you please let me know whats the issue ? Exception in thread "Main Thread" java.lang.NoSuchMethodError: getMailcapList
-
Nokia Xpress browser cannot access some web pages
For example, go to http://m.nationalrail.co.uk/, click "Live Departure Boards", then "Arriving". This gets the following error message: Can't reach http://m.nationalrail.co.... Please check the address I'm using version 5.5.0.0.27 of the browser on a
-
I left the room and upon return , the sounds on my iPad are all distorted and horrible sounding. How can I fix this? I've gone to sounds to check others there and they are all messed up.
-
Ipad mini with retina display has really slow and laggy streaming but very high download speed
I just got my ipad mini with retina display yesterday. The regular internet works fine as far as I can tell. I tried streaming video from watch espn, netflix, and youtube, and all three apps were so slow I couldn't watch anything. I have a high downl