Solaris9 installation is extremely slow
I have been trying to installing Solaris 9 on Sun V100 via CDROM, and it has been going extremely slow. Anyone has any suggestions?
Thanks in advance!
Thanks for the answer.
Well... I started to install last night around 5pm.
It took me about 2 hours to get the the point that
it starts to partition my disk, and partitioning
takes about 1 hour. Then I left coping file running
over night. I has not finished yet when I got in
this morning.
There must be something wrong, but could not figure
out why. I have installed Solaris many times before,
but have never seen this issue before. The strange
part is that I don't get any error messages. The
process moves forward fine, but just very very slow.Did you ever solve this problem?
I get this as well with Solaris 8....
Only seems to happen with own-burnt CD-Rs and not with original Sun CDs...
Tried all sorts to get it working but no joy. Takes days to do an installl !!!
Similar Messages
-
My macbook pro (late 2011) is extreme slow, freezing, crashing and lagging too often.
I am new to the forum, I hope this is the good topic to post my problem.
I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
Thank you in advance!
(and sorry for my english - it is not my mother language)
EtreCheck version: 2.1.2 (105)
Report generated 2014. december 11. 12:59:29 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
SyncMaster 1680 x 1050 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:55:58
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
StoreJet Transcend StoreJet Transcend 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 67
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/KeyRemap4MacBook.app
[loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
/Applications/PMHMac.app
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Library/Extensions
[not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
/Library/StartupItems/DoubleCommand
[not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
/System/Library/Extensions
[loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
[failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.bjango.istatmenusnotifications.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.sony.SonyAutoLauncher.agent.plist [Support]
[loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
[failed] XR_3045NI_Startup_Fax.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[running] homebrew.mxcl.mysql.plist [Support]
User Login Items: ℹ️
Flux Alkalmazás (/Applications/Flux.app)
iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Caffeine Alkalmazás (/Applications/Caffeine.app)
Google Drive Alkalmazás (/Applications/Google Drive.app)
Dropbox Alkalmazás (/Applications/Dropbox.app)
DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
RescueTime UNKNOWNHidden (missing value)
Alfred 2 UNKNOWN (missing value)
SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Skype Alkalmazás (/Applications/Skype.app)
uTorrent Alkalmazás (/Applications/uTorrent.app)
Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
Internet Plug-ins: ℹ️
nplastpass: Version: 2.0.11 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 [Support]
ViewRightWebPlayer: Version: 3.5.0.0 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
ResponsiveResize
Save to Pocket
Awesome Screenshot
LastPass
feedly
3rd Party Preference Panes: ℹ️
Double Command [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
Java [Support]
MacFUSE (Tuxera) [Support]
Perian [Support]
Xmarks for Safari [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
Destinations:
Transcend 2TB [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 367.91 GB X 3)
Top Processes by CPU: ℹ️
21% WindowServer
12% Console
8% parentalcontrolsd
6% backupd
6% Activity Monitor
Top Processes by Memory: ℹ️
462 MB mysqld
290 MB mds_stores
290 MB Safari
204 MB Finder
183 MB WindowServer
Virtual Memory Information: ℹ️
2.20 GB Free RAM
6.06 GB Active RAM
809 MB Inactive RAM
1.66 GB Wired RAM
1.87 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
Dec 11, 2014, 12:04:08 PM Self test - passed1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
Any idea what could be causing this??? I was told that to many pictures slow down the system, I have only 700 pic on file1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Macbook Pro 2011 extremely slow wondering if hard drive failure
Hello, I want to start off by saying I'm not a huge computer guru, so that is why I'm coming here first. My Macbook Pro worked very well for a year, and then it has slowed down drastically. I've always been a windows user so mac is kind of foreign to me, but I'm trying to learn.
Some problems I've encountered are 1. Extremely slow running whether internet related, or just an application. I have checked the activity monitor and nothing is hogging up my memory. 2. Spinning wait cursor (rainbow circle) when I try to do ANYTHING. It takes minutes to start computer once it makes it to home screen. The circle just spins for a few minutes. Even just web surfing it's there. 3. Battery drains from 100% to less than 20% in 30 minutes, which again is annoying. 4. When battery drains the fan turns on and seems to drain battery even faster. 5. I get a lot of random errors forcing shut down of programs. I have ignored this problem for two years by not using my laptop or using it very minimally, but I am going to be needing a laptop again for school and not just my iPad and phone so I was planning on taking my macbook to genius bar, but wanted to check here first since Apple is an hour away. Plus I want to be able to use the piece of equipment that I spent a decent chunk of change on. I used time machine to back up everything today. I know its not a space issue as I have 300+ free GB on hard drive. I have tried to read through similar posts, but its overwhelming so I came here to post my own question.
I ran disc utility and there were some errors, which were able to be corrected after a couple tries. Computer still slow though when trying to do anything and running rainbow circle.
In recovery mode I reinstalled OSX
I was finally able to install updates after completing the above that were not able to be installed before.
I ran etre check, this is the report that came up:
Problem description:
Extremely slow computer, possible hard drive failure
EtreCheck version: 2.0.11 (98)
Report generated November 3, 2014 9:25:29 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Uptime: 0:6:50
Disk Information: ℹ️
Hitachi HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (357.49 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5970H
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.coreservices.appleid.authentication.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[invalid?] com.luthresearch.savvyconnectmenu.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[invalid?] com.luthresearch.scservice.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
SavvyConnect UNKNOWN (missing value)
Google Chrome Application (/Applications/Google Chrome.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: Java 7 Update 67 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Growl Support
Java Support
Logitech Control Center Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
11% Safari
3% WindowServer
0% fontd
0% Google Chrome
0% ps
Top Processes by Memory: ℹ️
245 MB WebProcess
206 MB System Preferences
168 MB Safari
99 MB mds
82 MB Google Chrome
Virtual Memory Information: ℹ️
1.37 GB Free RAM
1.57 GB Active RAM
318 MB Inactive RAM
1.03 GB Wired RAM
436 MB Page-ins
0 B Page-outs
Basically I'm wondering if anything sticks out in this report. I was thinking it could be a possible hard drive failure. I know my computer has been dropped on the floor at least a few times. Thoughts are appreciated. Thank you for your patience.Eab, I feel your pain! I am replying simply to share my similar ongoing experience with my early 2011 17 inch MacBook Pro, running Mavericks with seeming ample hard drive space, [applications requiring less than 100GB, about 200GB data (total drive space of 500GB)] & 4GB RAM. (Disclaimer: I am not a wise or computer-savvy mac guru - simply a fellow traveler who has had a very similar set of problems - apps taking forever to load, rapid battery depletion & super overheated MacBook. While I am a Genius Bar groupie, getting to the Apple store is, for me, akin to an antarctic polar expedition (i.e. problematic). Having spent endless hours struggling with a similar issue, I offer you a synopsis of my struggle/experience.
STEPS TO DATE:
1.Installed several memory utility programs (Daisy Disk & MacCleanse) system
maintenance program to regularly and thoroughly empty application caches (Adobe apps & internet browsers being tremendous hogs), identify and remove language elements and other redundant space hogs, etc. Result: Small, but real improvement when I forced myself to perform a "scan and delete" session every second major computer run (typically about 6-8 hours in length). However, this did nothing to help the problems regularly detected when I run the Disk Utility which almost invariably demonstrates disk permissions that need to be repaired and, with increasing frequency, has demonstrated actual disk errors that require restarting and walking through a disk repair protocol. I did bring it to the Genius Bar where they kindly reinstalled Mavericks which they could do in about an hour versus the several hours that doing this at home requires. This did identify that my RAM was, on fact, a limitation on the speed at which I could run certain apps.
2. My next move was to install an additional 4GB of RAM. I bought the new RAM on eBay for about $90 because, with 3 kids equipped with MacBooks & iPhones, I simply couldn't afford the official Apple RAM. I even installed it myself, with the help of a YouTube video. Result: Giant improvement in speed (starting up or switching apps. If I had realized how simple it turned out to be, I would have done it well over a year ago. Some minor improvement in the overheating problem, but persistent problems with disk permissions continually requiring repair and periodic disk repairs (using Disk Utility) required.
PLANNED FINAL INTERVENTION:
3. I am purchasing and installing a solid state drive (ssd) and simply chucking the original hard drive, after considerable discussion with my savvier mac friends. It has become clear to me that, sadly, every hard drive has a finite life affected by a variety of factors. I am, in fact, hard on my equipment - running multiple graphic apps simultaneously, transferring massive GBs of data between my laptop, time capsule and an array of hard drives. I will let you know how it goes, but can share that the decision to get a solid state drive followed many conversations with multiple Mac guru-types (in the hope of saving you similar painful tribulations). The cost varies according to the size of the drive, but $400-$500 would buy a reasonable starting size. I am waiting for Black Friday sales, myself. Amazon (where I will likely purchase the ssd) is already offering a number of pre-Black Friday deals. While I don't really feel like putting out that amount of cash, I reassure myself that a new drive will almost certainly solve the disk errors (with a solid state one offering more durability) & will help me prolong the life of my MacBook Pro by a couple of years hopefully. It beats buying a new Apple MacBook only three and a half years after investing close to $3k for this one!
I am certain that more experienced forum users could point you to software that could help defragment your drive or may be able to offer other solutions. I've simply had enough of struggling with burning thighs and head-banging behavior triggered by slow performance. I hope this is helpful to you in some small way. The war is not yet over, but I'm feeling good about the battle plan! -
Ever since my upgrade to lion 10.7.3, and iCloud, my macbook is running extremely slow. What can I do? It doesn't seem like my contacts are pushing through to the computer from iPhone.
Then your basic issues are: too little RAM, incompatible software, dysfunctional installation.
Add more RAM or kill as many programs that you use until the computer is running normally.
See App Compatibility Table - RoaringApps. Upgrade any old software.
Reinstall OS X:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless. -
MacBook Pro extremely slow start up, Rainbow wheel of death. HELP!
Hi there
My Mac has just suddenly started becoming very slow. Upgraded to Mavericks 2 months ago. Had an issue at first install that was resolved with re-installation.
Has become very slow to boot, freezing at the Grey Screen with the Apple and spining cog. (Kernel I think?)
It is also very slow once logged in. Nothing has changed system wise. Any help would be much appreciated.
EtreCheck version: 1.9.11 (43) - report generated 6 June 2014 1:53:23 pm AEST
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:32:16
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (56.74 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.ZTE.driver.ZTELTEUSBCDCACMData (5.0.1) Support
[not loaded] com.ZTE.driver.ZTELTEUSBMassStorageFilter (5.0.1) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.12) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.12) Support
[kext loaded] com.digidesign.iokit.DigiDal (9.0.4f4 - SDK 10.5) Support
[not loaded] com.maudio.usb.fasttrackpro.driver (1.8) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.master (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2) Support
[kext loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.5) Support
[not loaded] com.zte.LTEdriver.cdc_ecm_qmi (1.0.2) Support
[not loaded] com.zte.LTEdriver.cdc_usb_bus (1.0.2) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
PACESupport: Path: /Library/StartupItems/PACESupport
Problem System Launch Agents:
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.sierrawireless.SwitchTool.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
None
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Flash Player Support
M-AudioFastTrackPro Support
Paragon NTFS for Mac ® OS X Support
Time Machine:
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
0% TextEdit
0% fontd
0% aosnotifyd
Top Processes by Memory:
119 MB mds_stores
106 MB Google Chrome
66 MB Finder
57 MB WindowServer
45 MB Dock
Virtual Memory Information:
1.77 GB Free RAM
1.13 GB Active RAM
213 MB Inactive RAM
787 MB Wired RAM
442 MB Page-ins
0 B Page-outs
Battery Info
Charge Information:
Charge Remaining (mAh): 3391
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 5599
Health Information:
Cycle Count: 806
Info received after running syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tai in Terminal
Jun 1 17:56:26 shaunmahallsmbp kernel[0] <Debug>: nspace-handler-unblock: did not find token 10524
Jun 2 12:12:30 shaunmahallsmbp kernel[0] <Debug>: nspace-handler-unblock: did not find token 94
Jun 6 09:24:24 localhost kernel[0] <Debug>: Previous Shutdown Cause: -60Thanks for all the suggestions guys, I'm not too Mac savvy, so the help is very much appreciated. So here's what I've done...
Had already tried to delete CleanMyMac. So I got EasyFind, and used it to delete/destroy the rest of the files. Did the same for Roxio, Sierra Wireless and Seagate. PaceAp would have been installed with Pro Tools, which is now gone.
There are several files associated with Sierra, PaceAp and Seagate (.plist & .bom files) that I cannot delete, as I get an error saying that cannot be deleted.
Tried Verifying and Repairing Disk Permissions - All was OK
Ran through the Sleep, then Restart, then Shutdown sequence. Noticed no difference.
Reset P-Ram.
Reset SMC
Rebooted again, holding command + R and ran the disk utility.
First Verified the disk. Got errors:
Invalid Directory item count
Volume bitmap needs minor repair for orphaned blocks
The volume Machintosh HD was found corrupt and needs to be repaired.
So I then ran Repair disk, it ran through and then said:
The volume Machintosh HD was repaired successfully.
The battery condition is normal
Charge Information:
Charge Remaining (mAh): 5420
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5482
Health Information:
Cycle Count: 806
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12401
I then rebooted, but nothing has changed. At the moment it boots to the grey screen with the Apple logo and cogwheel. Takes about 10 mins to then go through to log in. Often the fan will start running as if the system is under load.
When I click login the rainbow wheel pops up and it freezes for a while. Then it eventually loads the home page. Takes another 10 - 20 mins to load everything, the clock and wifi connections in the top right take ages to load.
It will be extremely slow for another 20 mins or so. Cant open folders or do simple tasks without getting the rainbow wheel. Then after a little while it seems to run OK, but still sluggish.
There are no programs that are launched on startup, and I close all programs before shutting the system down. I have over 100 GB free space on the harddrive. Yet I notice in the data from EtreCheck, it states there is only 66 Gb.
Haven't used Time Machine, as my external harddrive is formatted to FAT32, and I have nowhere to store all its contents to reformat it to Mac Extended Journal. I have backed up all the files from the system that I need.
So is there anything else I can try? Should I try a full system wipe and reinstallation? If so, how do I go about this?
I'm assuming unlike PC's, it's not just a simple task to replace the harddrive, if it is failing hardware?
I'm in rural Australia, so not readily near a Mac Support Shop. But if it is hardware, I'll just have to figure out some way to get to one.
Here's the updated info from EtreCheck, if its of any use..
Thanks again everyone the help, muchos gracias!
EtreCheck version: 1.9.11 (43) - report generated 7 June 2014 1:54:42 pm AEST
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 2:11:8
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (66.67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.ZTE.driver.ZTELTEUSBCDCACMData (5.0.1) Support
[not loaded] com.ZTE.driver.ZTELTEUSBMassStorageFilter (5.0.1) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.12) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.12) Support
[kext loaded] com.digidesign.iokit.DigiDal (9.0.4f4 - SDK 10.5) Support
[not loaded] com.maudio.usb.fasttrackpro.driver (1.8) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.master (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2) Support
[kext loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.5) Support
[not loaded] com.zte.LTEdriver.cdc_ecm_qmi (1.0.2) Support
[not loaded] com.zte.LTEdriver.cdc_usb_bus (1.0.2) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
PACESupport: Path: /Library/StartupItems/PACESupport
Problem System Launch Agents:
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.sierrawireless.SwitchTool.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
None
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Flash Player Support
M-AudioFastTrackPro Support
Paragon NTFS for Mac ® OS X Support
Time Machine:
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
8% Google Chrome
8% WindowServer
2% hidd
0% mdworker
0% fontd
Top Processes by Memory:
254 MB coreservicesd
127 MB Google Chrome
111 MB com.apple.IconServicesAgent
86 MB Finder
61 MB Google Chrome Helper
Virtual Memory Information:
780 MB Free RAM
1.52 GB Active RAM
716 MB Inactive RAM
917 MB Wired RAM
823 MB Page-ins
0 B Page-outs -
Windows 7 extremely slow after 60-90 minutes of use
My specs: Laptop is a HP Pavilion m6 Notebook PC
AMD A10-4600M APU with Radeon HD Graphics 2.30 GHz Processor
6 GB RAM and 64-bit Operating System
So the problem I'm having with my Windows is like after a hour to a hour and a half of operating time my Windows slows down to a slow pace. For example on start-up if I hit Start and type "calculator" I'll have my letters typed in real-time whereas
if I do the same say 80 minutes later it would give me the loading cursor and take about 5-10 seconds for the text to show up in the search box. I've already looked to see if my CPU and/or physical memory were the culprits yet they were both acting normally
(CPU at 2%-10% and Physical at 25-30%). When Windows would start acting up the video game I would be playing at the time (League of Legends or Sid Meier's Civ 5) would become unresponsive or extremely slow. What is even more strange to me is that even though
my Windows would be extremely slow my Google Chrome would be performing absolutely normal. For the meantime the only "duct tape" I have for this problem is restarting my laptop where I would get another 60-90 minutes of respectable operating time.
I need assistance, I'm at my wit's end and I have no idea what to do after trying to search the internet for my problem. Any help would be greatly appreciated.
Thanks,
TrevIn order to diagnose your problem you will need to download and install the below
Install the WPT (Windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage (if available), CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag -
Macbook Pro Extremely Slow - Help please.
Hi, my Macbook pro has been extremely slow lately. I can't have more than a couple applications open, without it being extremely slow and not functional. Here's an etrechek that I did:
Problem description:
Macbook pro (2011) running extremely slow… Not sure why.
EtreCheck version: 2.1.8 (121)
Report generated March 28, 2015 at 4:23:14 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 1185
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 28 days 0:4:4
Disk Information: ℹ️
TOSHIBA MK3265GSXF disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (84.49 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.68) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.68) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.lookupd.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.secd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.syncdefaultsd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
22 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.spindump.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
20 processes killed due to memory pressure
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist [Click for support]
[running] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[failed] com.rim.BBAlbumArtCacher.plist [Click for support]
[running] com.rim.BBLaunchAgent.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[failed] com.rim.BBDaemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.divx.agent.postinstall.plist [Click for support]
[failed] com.facebook.videochat.[redacted].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 40 Check version
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.3 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.7.0 - SDK 10.7 [Click for support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 10.1.3 [Click for support]
DirectorShockwave: Version: 11.6.3r633 [Click for support]
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Citrix ShareFile Sync [Click for support]
DivX [Click for support]
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 234.35 GB
Destinations:
Expansion Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 234.35 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Fitbit Connect Menubar Helper
1% loginwindow
1% sysmond
1% NotificationCenter
Top Processes by Memory: ℹ️
299 MB loginwindow
125 MB Google Chrome
90 MB Finder
30 MB launchservicesd
27 MB WindowServer
Virtual Memory Information: ℹ️
295 MB Free RAM
777 MB Active RAM
697 MB Inactive RAM
1.59 GB Wired RAM
233.69 GB Page-ins
6.21 GB Page-outs
Diagnostics Information: ℹ️
Mar 28, 2015, 03:47:24 PM /Library/Logs/DiagnosticReports/Terminal_2015-03-28-154724_[redacted].hang
Mar 28, 2015, 03:45:21 PM /Library/Logs/DiagnosticReports/???_2015-03-28-154521_[redacted].cpu_resource.d iag [Click for details]While 4GB may have been fine with Snow Leopard or Lion, that was 4 years ago.
If you have never done a clean install consider doing one. Backup, clone, setup a USB installer and wipe the system. Or wait for the new internal 500GB drive (so you are back to using about 50%) to do a clean install and run Setup Assistant. You would be surprised how even just that can feel and run.
RAM is pretty much a given so when you do, look at putting a 500GB SSD in there as well. -
Macbook Air suffering loud fan, extremely slow
Hi,
I'm using a MBA Mid 2013 (warranty ended by June 31), and below is my story (verry sorry if it's long and waste your time).
By the third week of June, my MBA got a problem with the sound. Since it's still in warranty duration, so i took it to an Apple authorized service center in my place. They kept it for a week, and after that, my MBA's sound problem gone. But:
Actually, I made some quick tests in that center, and everything seems normal. So that, i closed my MBA and left the center.
When i got home, i opened my MBA to retouch some photos, but the MBA is extremely slow (opening a photo in Preview took around 1 min), and the fan went crazily loud.
I opened the Activity Monitor. Surprisingly, there's a process named kernel_task was taking ~300% of the CPU, thousands of the CPU time.
I did some research in the community, and found a solution: "Reset SMC". I tried that solution and magically, the problem has gone. So that, i thought it was just a software problem, instead of a hardware one.
The warranty expired...
The first half of July:
Everything seems OK and my MBA is stable.
The previous week:
The kernel_task error seems back. At first, i repeated the SMC reset solution and it still worked. But few times later, that solution turned useless.
Although my Mac was still usable, but during the kernel_task error, it's very slow that i could not do anything. Sometime, the kernel_task automatically turned normal (and my Mac is fast again).
At that time, i tried a list of other solutions and found something:
- Reset PRAM: The key combination was very hard to be succeed. Mostly, my MAC normally boot to the OS.
- Safe mode: Same.
- Recovery: Same.
- Apple Hardware Test: Same. But, in a success one, the result said that there is a problem with my thunderbolt (When i check in the System Information, the thunderbolt part said that No Hardware Found...??).
So, I guess that there's few problem with the OS.
So that, in the previous weekend, i tried to re-install the OS (Maverick). My Mac seems normal again.
But today, after a sleep - wake cycle (close, and open the Mac screen), the kernel_task disaster was back.
In this evening, i tried to re-install the OS once again, with a different installation. But... the problem seems more serious.
When i booted by a usb to install OS, the fan still loud and my mac still slow, which lead to the OS install could not be completed (stuck at 13%). And now, i almost cannot even choose the Startup Disk. Although i pushed and pressed the option key, my Mac will automatically boot to the Utilities for restoring the OS (because i formated that Mac partition).
Now, i'm very disappointed and confused. My mac is slow and the fan is loud anytime, i cannot install the OS. A software (perhaps?) error now turns to a hardware (perhaps?) error?
Could someone please tell me what is that error, and is there anyway to fix it?
Thank you in advance!Well, when you use a secondary display you are making the graphics processor work harder. That would explain the fan noises. Also, be aware of where you place the comptuer. Try not to block the back so it can vent and not place it near other warm devices.
-
Time Machine is extremely slow in Yosemite
Hello all. Anyone else having extreme slowness with backups to Time Machine in OS X Yosemite? I started a backup after I did the upgrade (and changed a few things like app installs) and it's backed up about 5.6MB of data in 30 minutes. It still says "Calculating time remaining..." in system preferences for Time Machine.
Is anyone else seeing this slowness when making backups?
ThanksApple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
Photoshop Elements 10 is extremely slow to start
Photoshop Elements 10 is extremely slow to start. It needs three minutes after starting before any sign of the program appears.
Then another three minutes passes before the program will respond to a mouse click.
While the program is in use, the display frequently freezes at seemingly random times and is unresponsive for a varying period of time.
It has always been this way since installation.
I read in the community forums that starting the Photoshop editor directly with a shortcut will bypass the start screen and eliminate the problem. Tried it--it does not.
I also in the community forums that the program is trying to connect with photoshop.com which no longer exits. The fix offered was to disconnect from the Internet. This is not acceptable.
I will not be upgrading to a newer version as a fix (as someone suggested) unless it is offered without additional cost.
Is there any sort of work around if not an actual fix for this problem?
Photoshop Elements Version Installed: Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
All updates are installed as of February 13, 2014
OS: Operating System: Windows 7 64-bit, Version: 6.1
Hardware: Dell Optiplex 780
Intel CPU Family: 6, Model:7
Processor speed: 2926 MHz
Built-in memory: 3932 MB
Free memory: 2072 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 70 %Sorry, I guess I should have said "One of the suggestions offered was to disconnect from the Internet." As it happens, that works. Not using the welcome screen does nothing.
With the Internet connected, Photoshop 10 needs better than 6 minutes to start up and be ready to use. Starting while disconnected from the Internet requires less than 10 seconds.
This is a work around, but it is not a fix. Temporary and unacceptable.
Uninstall, reinstall? Been there, done that, too many times.
I was hoping for something different that would either fix the problem or upgrade a faulty product for users who deserve better.
After the customer has purchased a product in good faith, what sort of business practice recommends that the user disable a product feature in order to use it? -
I upgraded macbook to Yosemite, and now its become unbearable and extremely slow
Problem description:
I upgraded macbook to Yosemite, and now its become unbearable and extremely slow, I’ve deleted multiple files, and it is still extremely slow, I’ve also repaired disk permissions but it did little to nothing
EtreCheck version: 2.0.8 (95)
Report generated October 31, 2014 at 4:57:08 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:25:44
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (148.50 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 51
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/Extensions
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/Library/Sophos Anti-Virus/InterCheck.app
[not loaded] com.sophos.kext.sav (8.0.4 - SDK 10.5) Support
/Library/StartupItems/SymAutoProtect
[not loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[not loaded] com.wacom.kext.pentablet (5.2.5) Support
Startup Items: ℹ️
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.pentablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.sophos.autoupdate.plist Support
[failed] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
WacomNetscape: Version: 1.1.1-1 Support
WacomSafari: Version: 1.1.1-1 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
DuckDuckGo
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
2% kextd
0% AppleSpell
0% launchd
0% ocspd
Top Processes by Memory: ℹ️
228 MB com.apple.WebKit.WebContent
137 MB Safari
103 MB Messages
69 MB Spotlight
64 MB CalendarAgent
Virtual Memory Information: ℹ️
96 MB Free RAM
1.46 GB Active RAM
1.35 GB Inactive RAM
1.00 GB Wired RAM
2.12 GB Page-ins
9 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.apple.xprotectupdater com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 4019080058 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Solid State Drive Issue on Macbook pro mid 2012 extremely slow
I recently purchased a Corsair Force LS solid state drive and installed it on my laptop. The hard drive is extremely slow and I cant even install Yosemite on it. It's stuck at the installation screen and kept showing the remaining wait time is 12 mins. I left it over night but it's still stuck there. I thought the hard drive was defective so I returned and bought a Kingston ssd. I put it back in and have the same issue. I also bought the Hard Drive Caddy tray to replace the optical drive with the ssd. The hard drive works like charm when I swapped it with the optical drive. I was able to install Yosemite on it and works like charm. However, When I put it back to the hard drive slot. I was able to boot into Yosemite but It is extremely slow. I called apple and they said that they don't support that. It is so weird. I don't know what to do now
I recently purchased a Corsair Force LS solid state drive and installed it on my laptop. The hard drive is extremely slow and I cant even install Yosemite on it. It's stuck at the installation screen and kept showing the remaining wait time is 12 mins. I left it over night but it's still stuck there. I thought the hard drive was defective so I returned and bought a Kingston ssd. I put it back in and have the same issue. I also bought the Hard Drive Caddy tray to replace the optical drive with the ssd. The hard drive works like charm when I swapped it with the optical drive. I was able to install Yosemite on it and works like charm. However, When I put it back to the hard drive slot. I was able to boot into Yosemite but It is extremely slow. I called apple and they said that they don't support that. It is so weird. I don't know what to do now
-
Adobe premiere cs6 suddenly EXTREMELY slow and CPU intensive
Hi everyone,
I'm editing candon 5d mk III footage (h.264 files) on my late 2011 MacBook pro. Here are the specs..
240 gig SanDisk SSD harddrive (190 gigs free)
500 Gig (250 gigs free)
8 gigs ram
2.4 ghz i5 processor
Intel HD graphics 3000 graphics card
I'm a wedding videographer and I am currently closing my last edits of the season. I have edited 20+ 45 minute videos on Adobe Premiere CS6 and have had absolutely no issues at all. I enjoy working on premiere so much that I've been trying to get my videographer friends to give a shot and simplify their workflows.
Upon starting my second to last edit (same process as the other 18 videos I've done this season, organizing the footage within it's respective folder, loading it into premiere with the couples' choice in music and opening 4-5 new sequences based on the events of the day) I noticed that I was having a lot of trouble importing folders into my media bin. I had to import all of the footage unorganized because loading the folders "Preperation, Ceremony, Photos, Reception" with the footage within them would cause premiere to freeze and become unrepsonsive. So, finding no solution I added all the footage in no particular fashion. Just one large unorganized group. Then, while organizing the files into bins, I noticed even the smallest move would take several minutes to complete. Because I was working directly off of my hard drive I figured these kinds of delays would eventually catch up to me, so I moved all of my files to my HDD and decided to work on them there. The project itself continued to be extremely slow and started crashing regularly (especially when applying audio effects). After a few hours, I stopped being able to play 1080p video at all. It would jam and stutter so often it become unuseable. 720p video was the next to go along with my ability to render anything in less than 30 minutes - 1 hour. At last attempt to use premiere I was getting an "Unable to compile movie - Unknown Error" message when trying to render alpha channel things (lower third titles and things of the nature), my ability to change the resolution of the playback had disappeared (Going from full, 1/2 and 1/4 did nothing, it just remained at full quality) and finally doing anything in premiere caused it to use 300% of my CPU (based off of my Activity Monitors metering).
Does anybody have any clue as to what could be happening to my machine/program? I have a yearly subscription to adobe's creative cloud service if that helps. Oh and I've tried moving my media cache's from my HDD to my SDD with little or no results. Don't know if that helps.
Thank you to anyone who helps in advance. What I believe to be clean installs aren't doing anything so I'm hoping somebody can give me a hand.Sounds to me like specific media is dragging the Mac to a halt. (300%, really Apple? Isn't that like saying that my car can go up to 90mph, but last night I drove it at 300% speed, 270mph)
Some things to trouble shoot:
Do you have any assets in the project that are loaded directly from strange devices, like a SD card or CD audio? Any dynamic link media that may be problematic?
Is there anything that makes this footage different than footage from successful projects?
Can you work successfully with an old project?
Can you successfully start a new project using different or less media?
Is the 500 GB drive internal or external?
One time I was sent out at from work to troubleshoot a system that would freeze up like yours. The guy was an idiot and rude client that demanded that someone from our facility help him fix his own project. He said that he had been troubleshooting for a day, and then had convinced his organization's IT guy that he needed a way over spec new pc to run Premiere.
His system was fine. Within 3 minutes of checking media in his project, I saw that top track of the problem sequence had a video clip that was set to a speed of .01%, and he had the clip stretched for 24hours in the sequence. His project was supposed to be a 2 minute PSA. All his issues went away after removing the idiotic Day Long slow motion clip. He complained to my boss because I had laughed at him.
I relate that story to illustrate that it could be a weird thing with you media or fx, just as well as a hardware or software issue.
Good Luck -
7210 All-in-one with Windows 7 Draft print extremely slow
I have an Officejet 7210 All-in-One printer and a computer with Windows 7 32bit installed. I downloaded and installed the print driver for windows 7. Printing was working fine including fast printing. I changed the default color preference from "high quality" to "grayscale black only" and now my draft printing is extremely slow.
Any assistance would be greatly appreciated.
jsin007Hi
The 7210 was always a good workhorse printer.
It may be that your slow printing issue is related to installing the Windows 7 driver. When the Windows 7 print driver was installed it may be that the Windows 7 installer did not remove the older print driver correctly. This may cause conflict issues which could possibly cause the slow printing you are experiencing.
I do have a link to a troubleshooting page for a printer not printing after the installation of the Windows 7 driver. It involves downloading a print driver removal utility & then re-installing the Windows 7 driver.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02002372&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hopefully this will solve your issue.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.
Maybe you are looking for
-
Intermittently using Time Machine with an External Hard Drive
Ok, Kappy answered some questions I had about how Time Machine works with an external hard drive. After doing more reading about Time Machine, I found out that a person can, for example, leave the drive powered-off for a couple of weeks and only peri
-
JetForms processing slow on new Citrix server
JetForms processing on a new Citrix server running Windows 2008 R2 takes twice as long as on the legacy Windows 2003 server. Example invoice processing/printing: Legacy = 8-10 seconds New = 16-20 seconds. Printing same invoice directly from Adob
-
when I go to another website the back button to the home button never works. the home button works. I can't do any or the above mentioned features
-
I cannot sign in. I get error 400
Hi! Please help. I'm using photoshop elements 8 and I'm trying to sign in on my laptop but i keep getting error 400.
-
Raw adjustments made in Photoshop CS file browser are not transferring to Lightroom 4.
I have thousands of images all on external hard drives with raw adjustments made in Photoshop CS file browser. When I import these raw files from the external drive into Lightroom 4 the original raw adjustments are not transferring or at least the p