Sold to and Payer.

Hi,
For one Sold to Party, Two Payers with one Paying 30% and another 70%.
Can this be done. Kindly advise.
Regards
Subash.

Hi
1)in your case create two payers in XD01 with their respective account group and assign to the sold to party.
2 in billing level for second payer maintain different pricing procedure. which means for first payers different pricing procedure.
3) now you do the Billing now it canbe done now.
hope you have understood .
your doubts is clear don'tforget to reward
thanks
surya
Edited by: ramakrishna suryanarayanarao on May 30, 2008 9:11 AM

Similar Messages

OB20 - Sold-to-party and Payer

How do I see if a customer master requires the use of a RECONCILIATION account? basically i want to see if the Recon account is a REQUIRED entey or not.
I can use OB20 to pull it up but how do i specifically find the "Field Status Group" for "Sold-to-party" and "Payer"?
Thanks

hi
There is no need of field selection group...when you go into the OVT0...select the sold to party or payer and check the details...
Insdie details, You'll see the field status group, you can double click on the "general data" or "co code data" or "sales data"...when you go inside it....you can assign the field status...
Regards
Priyanka.P

Configuring Ship to party,Sold to party and Payer

Hi Experts ,
Subject:- Ship to Party, Sold to Party and payer
In the customized invoice the client requires the above mentioned addresses to be displayed.
Because all these three Partners are Different.
How to configure the same in sap. Only after configuring in sap the same will be reflected in the invoice
Guide me in this regard.
Thanks and Regards,
Anand

Hi,
In General Only the Payer and the Ship to address will print on the invoice. As it is a client requirement to print three addresses on the Invoice, first you should talk to ABAPER to identity the window for the three addresses
Now you can get the Address from VBPA which is the partner table.
Pick the Sales docment number which is VBELN and then goto VBPA table and get the numbers for the customer (payer and ship to and sold to) with the input key as PARVW . The Address wil be different for each partner function,
Then pick the ADRNR number and goto ADRC table
There u can find the fields in which the address will be stored and print on the printer using smartform and program.
regards,

Need to pick Bill to party and Payer from Ship to party instead of Sold to

Hi,
Please let me know the configuration setting needs to be done for capturing the Bill to party and Payer from the Ship to party instead of the Sold to party. This requirement needs to apply to curtain document types only.
Please respond as soon as possible.
My mail ID: [email protected]

Hello,
you can change your customizing settings in the transaction VOPAN and put there that the Bill-to and payer should be determined from the ship-to party ( in special partner determination procedure). Than assign this partner procedure to your spacial sales order types.
Best regards,
Lela

How to change bill to and payer for an internet order

Hello Gurus,
I have an issue. I am trying to change the bill to and payer assigned to Internet order through the partner determination procedure.
The scenario is when we create an internet order on the basis of sold to payer and bill to are selected. But the user has option to change the bill to and payer if there are many other maintained before saving the order.
to do that i am calling the crm_order_maintain function module. I am preparing the partner tables and input fields
In the input fields i am passing display type , kind_of_entry, no_type ,partner_no, partner_fct and relation partner.
Apart from these fields I am passing the reference guid, ref_kind and objectname.
t_field_names-ref_guid    = '4BB334EA8B0C24B6E10000000A02B02D'."wa_extension-ref_guid.
t_field_names-ref_kind    = 'A'.
t_field_names-objectname = 'PARTNER'.
t_field_names-logical_key = '0000000000031000000060      BPBP'.
INSERT t_field_names INTO TABLE t_input_fields.
With this I am not able to save the order with new bill to and payer. Am I missing something ?
Regards
Sohit

Hi Sohit,
I've the same requirement of picking one of the Bill-To from the dropdown on viewOrder.jsp
Well for maintaining the Ship-To SAP has given a a standard Action class : MaintainShipToAction.
and the method in the SalesDocument class to add new ShipTo but nothing for billTo.
I'm looking for a different approach to handle this problem, incase you find any solution then please share it with us.
Best regards
Sandeep

CRMD_ORDER, table to read Bill-to and Payer Number

Hi,
i'm trying to find the table that stores the partner information of bill-to and payer .
i can see the entry in crmd_order_link but all the partner information(ship-to , sold-to etc) is stored in the same. is there any appropriate flag that i can use to differentiate between those two.
after getting the partner(bill-to /payer) , where to find the name/text of the partner.
Thanks,
GV.

Hi,
You need to get all the partner information from the table CRMD_PARTNER. It has the field PARTNER_FCT to differentiate between Payer or Bill-to. After you get the partner GUID you may use BUT* tables ( e.g. BUT000) to get the partner details.
Regards
Prasenjit

Bill-to-Party and Payer Partner Determination in CRM Sales Order

Hi,
In ECC, the sold-to-party has different bill-to-party and payer for each sales areas .For example:
Sold-to-party:2001826
For 8000 sales org/72 distribution channel:
Payer: 2004818
Bill-to-party: 2004818
For 2000 sales org/ 02 distribution channel:
Payer:2001826
Bill-to-party: 2001826
These business partners are in CRM system and the relationship data based on sales organization exists in CRMM_BUT_FRG0081 database table.
I customize access sequence for bill-to-party and payer in CRM system which uses CRM_PARTNER_A by using Sold-to-Party as source. However it does not determine via this access sequence. Do you have any idea why the system does not use this relationship info?
Best,
Damlanur

Hi there,
Please use note 493947 to ensure all the manual configuration is in place. Also the item category for the plant item must be ATP relevant, the following code check this:
FILL_BTM_PARTNER_PLANT SAPLCRM_DOWNLOAD_MAP
check if item type is relevant for ATP
    check not ls_item_type-atp_profile is initial.
map plant to business partner
    lv_loc_number = <ls_bapisdit>-plant.
    lv_loc_type   = gc_atploctype-plant.
    call function 'CRM_CONFIRM_MAP_LOC_TO_BP'
      exporting
        iv_loc_number    = lv_loc_number
        iv_loc_type      = lv_loc_type
      importing
        ev_partner       = lv_partner_no
      exceptions
        no_mapping_found = 1
        others           = 2.
    check sy-subrc = 0.
If this still doesnt resolve the issue then you will have to debug the transfer queue stopping at function CRM_SALESDOC_MAP_BAPI2MBDOC to see why the data is not mapped.
I hope this helps,
Kind regards,
Vanessa.

Identify sold to and related partner functions .

How to identify sold to , bill to and pay to from ship to data in BW ?
Could you please help me with partner functions and describe me how it works in BW ?
Regards

I was not able to find out sold to , bill to and payer in customer attribute .
in cust hierarchy , i could not see any structure .
Do u know T-code to see customer hierarchy in ECC. ?
Regards

Screen enhancement in ME51N - control is not passing to PBO and PAI of exit

HI ,
I am doing screen Exit for the Tcode : Me51N / Me52N.
I have to add 3 Text fields in item level, i am using Enhancement:MEREQ001(in CMOD).
Initially i added those 3 fields in Structure CI_EBANDB.
Then i designed Screen in Screen Exit:SAPLMEGUI Screen Num:111.
Here in the PBO and PAI Module
MODULE STATUS_0111 , MODULE USER_COMMAND_0111.
the control is not going , i tried with break-point inside these modules.
But while executing ME51N , debugger is not working.
Code i wrote in both PAI and PBO
MODULE STATUS_0111 and MODULE USER_COMMAND_0111.
loop AT SCREEN.
       screen-output = '1'.
       screen-input = '0'.
       MODIFY SCREEN.
endloop.
I need to display the three screen in Display format not in editable format.
Thanks and Regards,
Prakash K

Hi
You need to write the code in PBO of that screen based on TRANSACTION TYPE.
there is a method call 'get_transaction_state' from this you will get the transaction type (H - create , 'V'- change 'B' -display) at run time.
If run time transaction type = B
LOOP AT screen.
      IF screen-name eq c_name . "field names
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
endif.

I purchase a movie with my ipad but i sold it and never synced it with itunes how do i get the movie back??!

i purchase a movie with my ipad but i sold it and never synced it with itunes how do i get the movie back??!

Unless you are in the US then films can't currently be re-downloaded from the store (and not all films can be in the US). If you are in the US then you could see if it's in the Purchased link on the left-hand side of the iTunes store home page for re-downloading : http://support.apple.com/kb/HT2519

Module Programming PBO and PAI flow.

Hi,
I am new to module programming,
My req are - I have 4 input fields and button in my first screen(1000)
After user enters these values then I have to validate this values in the database and then
I need to update 1 field value in the database. After updating I need to display the results in second screen (2000).
Can any one please let me know what is the process in PBO and PAI modules.
How to write code .
1.     where to validate field values
2.     where to write code for updating database.
3.     where to write code for displaying success/failure message in second screen(2000)
4.     where to write declarations.
Thanks a lot for ur time .
I highly appreciate ur help.
Venkat.

Hello
Check this out:
                            INCLUDES                                 *
INCLUDE ZIMMFORM001_TOP.
INCLUDE ZIMMFORM001_PBO.
INCLUDE ZIMMFORM001_PAI.
Main Process
START-OF-SELECTION.
CALL SCREEN 100. -> double click
END-OF-SELECTION.
Uncomment the following:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.   -> double click
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100. -> double click
*& Include           ZIMMFORM001_TOP
Global Definitions                                   *
"Your definitions
*& Include           ZIMMFORM005_PBO
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MEN'. -> double click -> CREATE SCREEN STATUS 'EXE' AND 'BACK'
SET TITLEBAR 'ZTIT'. -> double click
INITIATE WHATEVER YOU NEED
ENDMODULE.                 " STATUS_0100 OUTPUT
*& Include           ZIMMFORM001_PAI
*&      Module USER_COMMAND_0100 INPUT
      text
INSIDE THE CASE YOU CAN VALIDATE.WHEN 'EXE' IS SELECTED FOR EXAMPLE.
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXE'.
      PERFORM validate_form.
      PERFORM save_form_to_db.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Hope this helps, dont forget to reward
GABRIEL
Message was edited by:
        Gabriel Fernando Pulido V.

Screen exit for co11n and problems in writting the PBO and PAI Logic ?

Hi People,
I am developing a screen exit for transaction co11n. I have found the exit ( CONFPP07 ) ... I created a project and have
assigned this exit and activated the project. I have created a field named SHIFT on clicking this field i have to give three
possible values (a,b,c ) and i have to store these values in some table .......... now my problem is in which include i
have to write PBO and PAI logic ... should i have to write pbo logic in the include provided in the exit
EXIT_SAPLCORU_S_100 and PAI in EXIT_SAPLCORU_S_101.......or .........Can any tel me what should i have to do to
meet the requirements... and in which structure i have to add this field so that it gets stored in some table.
Thanks in Advance.

Hi,
Use the includes in the program SAPLXCOF given in CONFPP07 Exit.
You may use include zxcofzzz ( for Subprograms and Modules )
by creating it upon double click.
Regards,
Wajid Hussain P.

Sample code in PBO and PAI

Hi all,
i created a new field in the customer master (xd03) screen with a button. if i click that button, it will display the next screen with the new field. now i need to write the code in PBO and PAI events in that screen to get the data from table and to change the already exiting data.
can any body provide me the sample code wht to write in the PBO and PAI eventts.?
thanks in advance.
kp

Hi,
I think you find the answer but i still answered your question.
You can use the function module 'DYNP_VALUES_READ' to read value you want and use the function module ' HELP_VALUES_GET_WITH_TABLE' to get the values from kna1 table.
Good luck.

Why do we need to code loop statement in both PBO and PAI in Table control

Hi friends,
i have 2 questions-
Q1-why do we need to code a loop and endloop statement in both PBO and PAI in Table control,sometimes even empty as well?
Q2-what r d dynpro keywords?

Hi,
It is required to pass information from internal table to table control so we loop it in PBO and to get the updated information back, we loop in PAI and update internal table content.
To get more knowledge on Table controls check these threads -
table control
Table Control
Hope this helps.
ashish

Sold to and ship to party are freezed in quotation...

Hi all,
While creating a quotation I am getting the Sold to and Ship to party fields are freezed and empty..Can you please tell me where I need to change the settings to unfreeze them..
Regards,
Roopak

Hi
Freezed and empty means what? Is it greyed out ?
Then in Img-sd-basic functions-setup partner determination--setup partner determination for sales document header
Here you need to see what is the partner determination procedure maintained against the sales doc type quotation QT ( the third activity) for example say TA
Then the first activity partner determination procedure here select TA
Then the second activity partner functions in procedure here for TA you need to maintain Sold to party and ship tp party
Regards
Raja

Sold to and Payer.

Similar Messages

Maybe you are looking for