Sold-to-party default partner id map for customer field in SMCR - ChaRM 7.1

Hi Expert,
I am trying to map sold-to-party partner id default in SMCR- CRM screen (when Request for Change screen open) .
In IB52 ->Goto -> Partner , i gave sold-to-party details.
but its not reflecting in Request for Change screen open in CRm_UI.
Rg,
Karthik

Hi Karthik,
have you deleted from other levels?
Also check below note:
1165357 Sold-to-Party is not assigned to Service Desk messa
1518907 - Solution Manager: wrong partner determination after update to Support Package 24
1165357: Sold-to-Party is not assigned to Service Desk
824640: Customizing missing for Service Desk in Solution Manager
is sold to party have BP organization type?
Thanks
Regards
Vikram

Similar Messages

Partner number 0000002016 for customer 2348, partner function WE does not e

Hi,
We are getting errors:
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020146
CH Partner number 0000002016 for customer 2348, partner function WE does not exist. 3500016813
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020081
etc.
The Idocs are of 51 status.
Message Type - ORDERS
Part.num - ESAPP12400
Part Type - LS
Please help in resolving this issue.
Thanks and Regards,
Sowmya

Hi Holger.
Here are the details.
AG(sold-to) - 2022821583300
WE(ship-to)- 2022821586300
error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor. Message no. VG204
error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
EDPAR table entries
1000053---SP-Sold-to party2022821583300---1000053
1000054---SH-Ship-to party2022821586300---1000054
I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
Appreciate you help.
Arjun.

Partner number 2821xx for customer 2022821xx ,partner function WE not exist

Hi Guys,
I have problem with partner convertion for Inbound ORDERS to SAP.
Receiver :
port - SAPID
Partner - DEVSTF200
Type - LS
Sender:
Port - SAPXID
Partner - XIDSTF100
type - LS
receive IDOC with status 51 with error - Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist.
Need some Help.
Arjun.

Hi Holger.
Here are the details.
AG(sold-to) - 2022821583300
WE(ship-to)- 2022821586300
error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor. Message no. VG204
error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
EDPAR table entries
1000053---SP-Sold-to party2022821583300---1000053
1000054---SH-Ship-to party2022821586300---1000054
I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
Appreciate you help.
Arjun.

Partner number 0010000136 for customer 202154050 , partner function WE does

hey,
We i process an inbound 850 Idoc , I get the status message 51 eith the error " Partner number 0010000136 for customer 202154050 , partner function WE does not exist."
please advise.

Hi,
'WE' should be configured for that customer in customization.
Regards,
Sujatha

How to set partner determination procedure for customer hierarhies.........

hi,
sap gurus,
how to set partner determination procedure for customer
hierarhies.........
regards,
balaji.t
09990019711.

Hello Rajesh,
The PDP is set up in customizing.You must create a regular partner determination procedure.In the IMG choose
CRM>Basic Functions>Partner Processing-->Define Partner Determination Procedure
You can define a partner determination procedure for each object type.
PDP assigned to the object type Campaign can also be campaign-type-dependent.
IMG:CRM>Marketing>Marketing Planning and Campaign Management>Partner Processing>
Assign Partner Determination Procedure
Hope this helps!
Best Regards,
Shanthala Kudva.

Master Datasource Update for custom fields

I have a standard master data source for 0customer, I need some custom fields that are enhanced in the same SoURCE TABLE KNA1. please let me know if
1. i can create the generic data source Z_DS_CUSTOMER for custom fields only from KNA1
2. Create transformation 1 to Map the data source Z_DS_CUSTOMER to Ocustomer to load the custom fields only and set no transformation for other standard fields
3. Create transformation 2 to Map the data source 0customer_attr to same Ocustomer to load the standard fields.set no transformation for other custom fields
4. Then Load via DTP Standard fields first via transformation 2
5. Then Load via DTP custom fields first via transformation 1
Will the above will work fine, and I can avoid any enhancement to master datasource 0customer_attr
please help me with solution.
Regards
Soniya
null

Hi all my dear friends,
I have seen the recommendation by my SAP collegue and Anil
1. infoobject as Target and
2. in between Standard DSO
1 transformations as you mentioned from 1 IS
3. Common Info source
2 transformations as you mentioned from 2DS
4. Datasources (2no's ) as source to splly to data to DSO
Please tell me what is the need to do all the above why can't I feed directly the Infoobject with the below PLEASE tell me what will be the bad impact on design if I do the below.since my client is asking justification for build of each BI object
1. infoobject as Target and
1 transformations as mentioned from 1 IS
2. Common Info source
2 transformations as mentioned from 2DS
3. Datasources (2no's ) as source to splly to data to DSO
I am not going for enhancement since it is not populating the datasource in rsa3. if you can correct that it would be great.
I have the same code for all custom fields none of them is working no records are pulled in RSA3 For custom field ZZSTAT.
Please help me with this
Thanks
Soniya Kapoor
*data: l_BIW_KNA1_S like BIW_KNA1_S
*case i_datasource.
*WHEN ' 0CUSTOMER_ATTR'.
*loop at C_t_data into l_BIW_KNA1_S
*l_tabix = sy-tabix.
*clear I_KNA1.
*select single * from KNA1 into i_KNA1 where kunnr = l_BIW_KNA1_S-kunnr.
*if sy-subrc = 0.
*l_BIW_KNA1-ZZSTAT = I_KNA1-ZINSTAT.
*modify C_t_data from l_BIW_KNA1 index l_tabix.
*endif.
*endloop.
*endcase.

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
 'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
 'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
 'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
 'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as T528B
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Icon for customer field (field group)

Hello!
We have a need to follow-up one indicator through a customer field thanks to icon (like severities).
Do you know if it's possible to manage that with the field groups for customer field (I couldn't achieve that yet), or if we have to develop a dedicated webdynpro application for that?
Thanks!
Matthias

Hi
You need to use programs provided by SAP to handle dynamic behaviour.
The idea is to store your BDC data into a file. (If you are already reading
from a file, you still may have to write to a file suitable for the
program).
The SAP standad program can be called using a SUBMIT.
Here are two programs that you can try :
For creation of Customers : RFBIDE00
For creation of Vendors : RFBIKR00.
Regards
Neha

Change Log for Custom fields

Hi All,
I need the change log for custom fields added in BP transaction codes.
Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
Please let us know if iam missing any other thing?

Hi Amit Singh,
Apart from clicking the checkbox in dataelement...
There are some settings need to be done by BASIS
and some settings and entries should be made in SCOD t-code
create entriy for change document here..
also hv a look on below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
Custom Table values in CDPOS and CDHDR
scdo
wat do these fields in scdo stand for?
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Strategy for Custom Fields

Hi Everyone,
I've a question related to handling of custom fields during upgrade.
Scenario:
9.0 delivered record has a custom field added to it.
After initial pass, following happened.
1. 9.0 delivered record was replaced by 9.2 delivered record structure
2. Custom Field was deleted
3. Data for the custom field was dropped too..
Q1 What should be the best strategy to get the data and field back... Here is what I understand.
Keep 9.2 record
Add custom field to it.
Import data for custom field from another 9.0 environment.
Suggestions welcome.

during initial move don't drop the custom added fields which are needed.
This way you will not lose the data

Changed document for custom fields

Hi All,
For business transactions we can see changed documents under Extras menu.
I have custom tabs & custom fields in business transaction. We need to see the custom field changes by value & user in the above menu. Is it possible? how?
thanks,
Bhushan

Hi Murlidhar,
My question is related to SAP CRM. The notes you suggested are not for CRM.
Others, do you have any idea how to add/show records in "Extras-> Change Documents" of business transactions like Sales order, activities for custom fields not using EEWB.
thanks,
Bhushan

Bapi bbp_create_be_rs_new mapping a customer field to standard field

hey guys , I am trying to create a reservation in ECC and i am trying to map a custom field to a standard field in ecc. In the structure of the reservation in the bapi there field does not exist but it exists in ecc. How do i map one of the values from the item table to a field to ECC when the field does not even exists in the bapi?
The field that i want to map is PRIO_URG in ecc and it does not exists in the bapi bbp_create_be_rs_new. I saw that there is an IT_RS_EXtensionin strucutre but I dont know how to pass a custom field to a standard?
I also want to pas a text id field to ECC too? How should i do that? thank you.

help! I don't understand how to pass my value that i got from a table in SRM to the bapi structure bapiparex?

Negative values for Custom field in SAP coding block !

Hi All,
Hope all of you are doing fine.
I need your valuable suggestion/possible workaround for the following requirement.
u2022 The project requires me to add a custom new field to SAP coding block, which can take negative numeric values.
u2022 The standard u201Caddition of custom fieldu201D configuration allows me to have the data type of the newly added custom field as either NUMC or CHAR. NUMC data type does not allow negative values. Standard configuration does not allow me to choose other data types (for custom field addition) like QUAN which can allow negative values (by checking the Sign at domain level in data type).
u2022 Moreover, once I have added the custom field, itu2019s not possible to change the data type of the newly added field (say from NUMC to QUAN).
I wanted to know if anyone of you have any project experience/knowledge about possible workaround, where we can add a custom field in SAP coding block, which can accept negative numeric values (through standard configuration or otherwise).

No experience on that, but I strongly advise you to not trying to do something else than what was designed by SAP. So, you can create a character type field, with for example a field exit (though this technology is obsolete, it's very useful in that case) to validate its content (and reformat it if needed).
Note that from a functional perspective, I think an amount is strange in the coding block, so maybe ask the functional people to know why they need it...

"Partner Determination Steps for Customer Master" clarification

Hi,
Let me clear myself at the outset itself, that I searched SDN for my below mentioned query, however I could not find any answer to my satisfaction....here I am posting again
In "Partner Determination for Customer Master", the following steps are undertaken -
Step 1:
1.a.) Create New Partner Determination Procedure
1.b.) For each Partner Determination Procedure, different Partner Functions, which are applicable for that specific determination procedure, are assigned. (along with other properties like if the PF is mandatory, not modifiable )
Step2:
"Partner Determination Procedure Assignment", here we assign different Partner Determination Procedure to different Account Groups. In other words, indirectly, we assign the partner functions to account groups. Right? (Please correct me if I am wrong)
Step3:
"Partner Function". Here we define new partner functions, (which are used in Step 1...)
Step4:
"Account Group- Function Assignment" - Here we assign the Partner Functions to Account Groups
Now My Question
(A) Since the Partner Functions are assigned (via partner determination procedure) to account groups in Step 1, then why Partner Functions are assigned AGAIN to account groups in Step 4. What is the significance of this assignment in Step 4.
(B) Is there is particular sequence of Steps (1 to 5), one should follow when somebody has to create new customer account group and/or new partner function.
Thanking you all in advance.

Dear SR
Leave SAP Partner Determination screen for 2 minutes and first understand the logic
1. Create the new partner functions
2. Create the new determination procedure
3. Link the new partner functions to the new determination procedure and add mandatory, non modifiable ,optional creteria
4. Assign the new determination procedure to the document type or account group at appropriate level
This is essence and this is for all 8 levels like CMR,sales doc header,item etc
Now coming to your qn
When you define a new account group ( you might be aware account group controls partner functions of CMR) you will say that your new account group will carry out patner functions like SP,SH,BP,PY
That is ACCOUNT GROUPS function assignment
Whenever you create a new account group you will do field selection in OBD2 like suppress optional.reqd etc,create no ranges and assign no ranges and also mainly this activity partner determination
These are must settings for a new account group
AG is the german key for sold to party Partner determination procedure
This is step 1
Then in next step you will tell AG will carry out such and such partner functions Step 2 like mandatory not modifiable etc
Step 3 is link the AG to your account group
Step 4 is partner functions say if you want to create a new partner function say SB special stock partner
(in concept this is the firststep)
Step 5 is once again partner function account group assignment
So when you create a new partner function you will do step 4 first and step 5 and then 1 and 2 and 3
when you create a new account group you will do step 5 and then 1 and 2 and 3
Hope you understand now
Partner functions are relatives in your family
Say in a family we have Father ,mother sister, brother (these 4 partner functions)
This is called as Happy Family and this Happy Family is the Partner determination procedure in SAP
This Happy Family is linked to the account group
So Happy family means there are 4 partner functions
So whenever you create a CMR in the account group this father.mother,brother,sister will come as default
Suppose you add another partner function say Uncle
First you have to create uncle
Then you have to tell this account group will accept uncle
Then link the uncle in the happy family that is determination procedure of SAP along with the 4
Then assign happy family to the account group
Now when you create a CMR along with father.mother,brother,sister along with that uncle will also come
Regards
Raja

Sold-to-party default partner id map for customer field in SMCR - ChaRM 7.1

Similar Messages

Maybe you are looking for