Soldier in Afghanistan needs help with MBPro display problem

My son is in the Army Infantry (Airborne). His unit is currently stationed in southern Afghanistan on a small Combat Outpost (COP), where he will be for about 8 more months. He has had a MBPro since mid-2008, and his AppleCare Extended warranty is still in affect. This is his description of the state of his MBPro:
"hey dad, an update. I got the mac to boot using PRM reset. Now, it makes the boot noise and the keyboard lights up but the LCD screen still wont come up. From my online research it seems my nvidia graphics card has gone out. Something which can be repaired cheaply at an apple store. However, i have no way to mail back my computer and the repair involves tearing apart the logic board to replace the video card."
I called Apple and was told Apple must receive the laptop stateside. As my son said, it is impossible for him, a lowly Specialist, to ship anything home. The guys in his unit are resourceful, and they do have the tools needed to attempt repairs (spuds, etc.). However, we would have to get a replacement logic board to him (at our expense), and we've looked at www.ifixit.com and found the tutorial for replacing a logic board. I personally would never attempt such a repair, even though I have myself replaced a hard drive in my PB and the power port in my wife's laptop. The logic board is WAY under everything else, and the chances of a screw-up are great. And, of course, the Apple warranty would be voided.
Does anyone have enough experience with logic board repairs to say they SHOULD attempt the repair on site? OR, is there anyone in the military who can suggest a way to actually get this Apple "brick" stateside for repair under the warranty?

To be fair to Apple, their warranty does state that the need for a repair/replacement must be shown to be necessary to their satisfaction. That means they have to have the MBPro in their hands to examine it. At this time, we cannot prove that the Nvidia card on the LB has failed. Over the 20+ years I've used Apple computers, they've been very good at honoring their warranties. It's not Apple's fault that my son is in a rather faraway place. How many other high tech companies do you know of who have coverage arrangements in this kind of situation? We're not expecting Apple to do anything more for us right now. If we can get the MBPro stateside, I'm sure Apple will treat us well.
As for a cheap PC laptop, well, that probably wouldn't be a good solution, either. My son is a gamer and uses Windows on the MBPro only for games not available under OS X. The MBPro is an OK, but not great, PC game laptop. However, a cheap PC laptop would probably be WORSE for gaming, so it wouldn't be a good buy. An expensive gamer PC is not an option, as my son hates Windows!
So, there's our conundrum. Right now, it looks like our best solution would be to get a used MBPro (non-Nvidia!), ship it (hoping it gets there in one piece), then swap the memory from the broken machine into the replacement. This will not void the Extended Warranty. Then my son can re-install his data (and Windows) from the external drive that he uses for Time Machine. That's the current idea, anyway.
All-in-all, while this is a complicated problem with no easy solution, it's not that big a deal, relative to everything that's going on in my son's life.
Thanks for your suggestions!

Similar Messages

Need Help with Address Display

I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
Andrew

The example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                    employee_id
             THEN NULL
          ELSE employee_name
       END employee_name,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                      employee_id
             THEN NULL
          ELSE employee_id
       END employee_id,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                            employee_id
             THEN NULL
          ELSE accounting_department
       END accounting_department,
       street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek

I need help with a browser problem

I am was given a new iMac G3 (from 2001) which was really never used.I have not yet had any serious problems with it, but really could use some help with a browser problem.
I have 4 different web browsers that needs the macro media flash player update. The browsers I use are internet explorer, iCab, Netscape, and the original Mozilla Firefox.
It would be of great appreciation for the readers of this post to answer my question.
I am also having the problem with installing the plug - ins for the browsers. Thank You For Taking the Time To read This!

Hi, rynodino -
As Tom has suggested, plugins need to be installed in the Plug-Ins folder for the browser.
Typically each browser will have its own Plug-Ins folder, usually located in the same folder containing the browser itself. In order for each of several browsers to access the same plugins, the plugins must be replicated and placed in each of the Plug-Ins folders for each of the browsers. The easy way to do that is to hold down the Option key while dragging a plugin to the new location - a copy (not an alias) of the plugin will be generated at the location it is dragged to.
Most plugins will display a Netscape icon regardless of where they are located - this is normal.
It is not unusual for the installer for a plugin to default its install to the Plug-Ins folder for Internet Explorer. So be it. Just replicate the new plugin to the other Plug-Ins folders as needed.
Note that some plugin installs will involve more than one item. For those, be sure to replicate all items for it. Using labels can help identify what is new, what has been most recently added, in a Plug-Ins folder.

Please I really need help with this video problem.

Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
          preloaderBar.visible = true;
          preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
          var perc:Number = e.bytesLoaded / e.bytesTotal;
          preloaderBar.percent.text = Math.ceil(perc*100).toString();
          preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
          preloaderBar.percent.text = '';
          preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
          if (filme != "sets.swf")
                      filme = "sets.swf";
                      carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
          if (filme != "home.swf")
                      filme = "home.swf";
                      carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
          btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
          btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
          btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
          btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
          btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
          btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
          trace(stat.info.code);
meta.onMetaData = function(meta:Object)
          trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
            ns.resume();
            t.removeEventListener(TimerEvent.TIMER,timeHandler);
            t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank you

My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

Need help with this book problem...Pig game...can ANYONE help!??

I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!

Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?"

Need help with simple mask problem

hi there this is mark from superbooty a band that has played in the bay area for over 10 years...
i was wondering if someone could help me with a Motion2 problem i'm having regarding masks.
i'm working on this simple animated scene of a car going by a beach - the photo is from the passenger side and shows the outside mirror.
i'm moving the background (different from the original that came with the car) and i want to move an image of tokyo inside the mirror housing too.
i figured out how to do the mask but when i try to animate the image of tokyo the mask layer moves with it. when i lock the mask i can't move the image - ???
there's got to be a way to lock the mask but be able to move what it is masking..
here are the links to three images that show what the problem is - the first is
the shot of the scene unmasked, shot 2 is the scene with the mask enabled, and the third is the shot when i try to animate the tokyo background:
http://superbooty.com/mirrorbeach1.jpg
http://superbooty.com/mirrorbeach2.jpg
http://superbooty.com/mirrorbeach3.jpg
any help would be most appreciated - thanks!

Adam's solution is the one I'd use - put the mirror contents in a layer, mask the layer, then manipulate the mirror content image. Did this solve it for you - if so, please click on the or buttons over posts as appropriate...
Patrick

Need help with page display URGENTLY!!!

Hey,
I'm trying to start up my new iPod nano. I've got the songs for it, but the page won't display all the way. Where it says the licence of agreement it won't show the o.k. button and before that it doesn't say the register button either. It doesn't do this on my internet. Or on anything else. So now I can't put anything on my iPod because I can't get it started up.
Please help! I really need to put some songs on my new iPod!!!!
Please and thank you.
xKeegaNx

Try increasing the resolution of your computer's screen (right-click on the desktop -> Properties - Settings; you want 1024x768 or higher) and perhaps then you'll be able to see all the buttons and controls in iTunes.

Need Help with external display...

First, let me explain what is happening. I'm using an external 19" Gateway LCD display with my Powerbook G4 1.25Ghz. Via DVI-D input. Everthing from connection to correct resolution is working fine. But the moment I change the refresh rate from 75Hz to 60Hz, the monitor starts to jitter or seems to have a nervous condition. The problem corrects itself only after a restart but I can change from 60Hz to 75Hz with no problem.
Now, from my understanding refresh rate has no bearing on LCD monitors, is this correct? and why would the monitors manual say that the native refresh rate is 60Hz. So, I'm concerned if running the monitor at 75Hz will degrade or hurt it. And once again why does the monitor image shake when going from 75Hz to 60Hz but not vice versa.
Any and all response with your experience is greatly appreciated.
David

You shouldn't need to adjust the refresh rate on an LCD display. Just leave it at it's default.

Need help with Firefox display issue on one page of site

I have a page that W3C validates, displays properly in IE and Netscape, but does not display properly in Firefox. The issue is with a style class applied to the inner centered table. class= "vert_table" This class works on all of the other pages in the site, but not in this one.
The page:
http://www.redshift.com/~lorac/sdy-46-49.html
The issue:
< table class="vert_table" width="760" border="0" cellspacing="0" cellpadding="0" align="center" bgcolor="#f1ebe8" >
The vertical rule does not display, and further down the page a dark left-right border appears starting with this text.
my mother, when I was wasting my life away not knowing who I was,
and ends with:
Mojin: (hugging him) I don't expect you to love me. I just want you to live, that's all.
I have been looking through this code for two days, searching for any offending omission in code or redundancy that would break the page. I've searched for missing div tags but none are apparent to me. I'm hoping someone with fresh eyes can spot it right away.
It's odd that the page validates but Firefox cannot display it properly.
Sample page of code working properly:
http://www.redshift.com/~lorac/sdy-41-45.html
Any help is appreciated.

Hi Jim, thanks for the reply. Your suggestions sound interesting but I'd like to figure out why this particular page doesn't work when all of the others do. I'm sure it's just a little code thing that I'm overlooking.
I could revert back to a saved page, but I updated text and images on this page before the verticle border broke, so I don't want to lose those edits. And that is why I'd like to fix this one instead of redesigning the page.
BTW, I forgot to mention in my first post, GoLive CS, W2K.

Need help with Apple Display 20" going black

There support and mac comrades,
I was wondering if anyone has this following problem and had it fixed.
I am currently using double 20" Apple display on a Mac Pro, and suddenly one of the screen start to turn black and get back to normal after few seconds. A week later, the screen goes totally black and won't turn on anymore. However, after shutting down the computer and removing and re-pluging all cables, the screen comes back alive for couple hours. In the beginning I taught that it was the cables so I swap the cable of the two screens around but the same screen is having the same problem. Then I start to think that it is because of the graphic cards, so I tried on another Power G5 and same problem occur after couple hours.
Now I know, that this screen is defect and not caused by cables or graphic cards, is there any troubleshooting for this kind of problem?
Please help!
Sincerly,
Jean

The display is brighter in the upper half then the lower one.
This indicates the lower back light is out, or a component called an inverter has failed, or a connector to these things has failed, and the short/short/long flashing power button is a signal telling you that. There is no way to stop the flashing unless you fix the failed component.
I do not recommend attempting fixing this problem yourself. Inverters can have relatively high voltage and could be dangerous if you don't know what you are doing.

Need help with new display screen

I'm using premier pro and want to get a large display screen, I've heard a lot about the new Apple 24" LCD and the Dell 24" UltraSharp 2408WFP...anything else out there thats as good?? Pros? Cons?
Thanks!
Nick

I found this happened to my phone too after the ios7 updates. Solved by turning off auto-brightness. Since then all has been fine, just have to manually brighten/dim screen when I need to

Need help with conditional display

I found a older thread (704012) that explains how to conditionally display a link using style. Which is what I want to do. The part I'm having trouble with is that part of the instructions say to put
class="row_has_values_#HAS_VALUES#"
in the Link Attributes which I have done. I also have a column in the report called HAS_VALUES and I'm properly populating it in my select. I know because I left it displayed while I'm testing. I can run the report and I have Y's and N's showing up in that column but the conditional part does not work. When I look at the page source (below) I see that in the html the #HAS_VALUES# has not been replaced by the actual Y or N. I think that's where I'm having trouble? I think it might work if there was a Y or N in that but I don't understand why that didn't happen.
<tr class="odd"><td headers="LINK"><a href="f?p=125:3:12628966088981::NO::P3_PROGRAM_KEY:2" class="row_has_values_#HAS_VALUES#"><img src="/i/e2.gif" border="0"></a></td><td align="left"

LawrenceJ wrote:
I've continued to snoop around and see lots of posts on conditional display in reports. Common desire I guess. I saw some stuff that I interpreted to suggest that what I'm trying to do may not work in interactive reports, only in classic reports. Does that sound familiar?
That would certainly apply to anything template-related. However there have been enhancements to IRs (like adding HTML Expressions) that might supersede information in older posts. If you provide a link to the sources you've found and the APEX version you're using someone will be able to confirm whether that information is relevant.
Many other posts on doing things conditionally in reports seemed to lean towards "selecting" the html based on data values and then just letting that get put in the report column. That looks promising but sure is a bit ugly. I've very little apex experience but lots of mod pl/sql and that sort of solution was pretty common when I did stuff with it. I saw a little suggesting using templates as a solution but I'll confess to not understanding it at all.
As I pointed out in the original thread, if the conditional display of the link is in any way security related then CSS or JS/jQuery methods are not acceptable. If the user is not supposed to be able to click the link or see any data contained in it, then you have to use a method that ensures that the link element never reaches the browser.
Hard-coding the link HTML in the report query is the common approach, but is as you say a bit ugly. Using a custom report template (my favourite APEX subject) enables clean separation of the report query, conditional logic and HTML structure. If you know HTML then you're advised to get familiar with using templates in APEX. You'll find this a major advance on the PL/SQL web toolkit. What is it that you're not understanding about using templates?

New mac user needs help with default display

hi, i am a new mac user and i accidentally changed the default display. I want to change it back to the default display but it doesnt seem like any of the options in "system preferences" - "display" change it back to the default out of the box display. please point me in the right direction. thank you!

im talking about the screen resolution. I went under "system preferences" then clicked on "display" and somehow the mouse clicked on another resolution which stretched everything out. so I went threw all of the difference resolutions and nothing seems to be like the default one. am i missing something? thanks

Need help with dual display configuration

I have just connected a HD, widescreen monitor to my Mac tower and am having trouble getting video from FCP to show up on it. It's connected to the mini port and is displaying the same desktop image as my primary monitor but I can't seem to get it to display the video when editing. What am I missing?

The "mirror" box was already unchecked. The best I could get after trying every conceivable combination was just one frame at a time whenever I stopped playing the timeline. The screen then refreshes to show whatever that last frame is, but it will not play the video, it just displays the very last frame.

Need help with container display / states

Greetings!
I am trying to use states to change the contents of a canvas
which is the second of two within a tab navigator. Buttons trigger
functions to change the state and change the selectedIndex of the
navigator to the second tab.
The functions work fine if you first view the second tab. If
you click the buttons before viewing the second tab, the whole
thing blows up. Heres a link to app:
http://test.arsandbox.com/player.cfm
Any insight would be appreciated!
Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="initApp();">
<mx:Script><![CDATA[
private function initApp():void {
private function displayDirectory():void {
switchTab();
currentState = "stateDirectory";
private function displayWriter(selectedWriter:String):void {
currentState = "stateWriter";
switchTab();
private function displaySong(selectedSong:String):void {
currentState = "stateSong";
switchTab();
private function switchTab():void {
ContentTabs.selectedIndex = 1;
]]></mx:Script>
<mx:states>
<mx:State name="stateDirectory">
<mx:SetProperty target="{directoryBox}" name="visible"
value="true"/>
<mx:SetProperty target="{writerBox}" name="visible"
value="false"/>
<mx:SetProperty target="{songBox}" name="visible"
value="false"/>
</mx:State>
<mx:State name="stateWriter">
<mx:SetProperty target="{directoryBox}" name="visible"
value="false"/>
<mx:SetProperty target="{writerBox}" name="visible"
value="true"/>
<mx:SetProperty target="{songBox}" name="visible"
value="false"/>
</mx:State>
<mx:State name="stateSong">
<mx:SetProperty target="{directoryBox}" name="visible"
value="false"/>
<mx:SetProperty target="{writerBox}" name="visible"
value="false"/>
<mx:SetProperty target="{songBox}" name="visible"
value="true"/>
</mx:State>
</mx:states>
<mx:Panel id="MainPanel" width="100%" height="100%"
layout="horizontal" title="Example" horizontalAlign="center"
verticalAlign="middle" backgroundColor="0xB3C0C6">
<mx:DividedBox direction="horizontal" width="100%"
height="100%">
<mx:VBox width="250" height="100%"
backgroundColor="#ffffff">
<mx:Button label="Directory"
click="displayDirectory();"/>
<mx:Button label="Writer"
click="displayWriter('1');"/>
<mx:Button label="Song" click="displaySong('1');"/>
</mx:VBox>
<mx:TabNavigator id="ContentTabs" width="100%"
height="100%" visible="true">
<mx:Canvas label="Homepage" width="100%" height="100%"
horizontalScrollPolicy="off">
</mx:Canvas>
<mx:Canvas label="Writers" width="100%" height="100%"
horizontalScrollPolicy="off">
<mx:VBox id="directoryBox" width="100%" height="100%"
visible="true" top="0" left="0">
<mx:Label text="Directory Box"/>
</mx:VBox>
<mx:VBox id="writerBox" width="100%" height="100%"
visible="false" top="0" left="0">
<mx:Label text="Writer Box"/>
</mx:VBox>
<mx:VBox id="songBox" width="100%" height="100%"
visible="false" top="0" left="0">
<mx:Label text="Song Box"/>
</mx:VBox>
</mx:Canvas>
</mx:TabNavigator>
</mx:DividedBox>
</mx:Panel>
</mx:Application>

The items in the second tab aren't actually created or
instantiated until they are first viewed. This is a performance
setting built into Flex. You can however over-ride the setting and
force all the tab contents to render immediately when the tab
navigator is created. To do this, you define the creationPolicy on
the TabNavigator and set the value to "all". Warning, this will
hurt performance if the tab navigator has a lot of large child
items.

Soldier in Afghanistan needs help with MBPro display problem

Similar Messages

Maybe you are looking for