Sole proprietor flag - limitation with BBPGETVD

Hi all,
We are on SRM 7.
For vendor replication,the reports arestill the same i.e. BBPGETVD and BBPUPDVD in both SRM 5 and SRm 7.
However in SRM 5,there was a limitation with BBPGETVD that it does not replicate a vendor marked as a sole proprietor in R/3 down to SRM...Can someone confirm if that limitation still exists in SRM 7 also?
Also does anyone know why SAP does not replicate a vendor marked as a sole proprietor in R/3 down to SRM? I did find athread on this same issue but no solution has been updated in the post
Re: SRM6: BBPGETVD Does not Replicate Sole Proprietors
Is there a way BBPGETVD can be useed to replicate vendors from ECC which have this flag "sole proprietor " checked/marked?
Please advise.

Replicate Natural Person from ECC to SRM?
However, there is a pilot note available (1281547) to change this behaviour, since it is the standard one.
In order to be included in such note, an SAP message should be opened.

Similar Messages

SRM6: BBPGETVD Does not Replicate Sole Proprietors

Does anyone know why SAP does not replicate a vendor marked as a sole proprietor in R/3 down to SRM? How can we replicate sole proprietors? We are running in extended classic scenario.

Hi Onye
Indicator: Is business partner a natural person?
Denotes a natural person.
Use
In the following countries, the system needs to know whether the taxpayer is a legal or natural person so that it can check the tax numbers correctly:
Brazil
Bulgaria
Colombia
Croatia
Greece
Italy
Mexico
Peru
Slovenia
Thailand
Ukraine
The flag is also used in conjunction with the Statement of Payments to Natural Persons report, as used in the Czech Republic and in Slovakia. This report only covers customers and vendors for whom you have set this indicator.
In South Korea, it is used in conjunction with the Generic Withholding Tax Reporting program.
LFA1-STKZN
bbp_vend_sync jobs just update your vendr data . No worries.
and in spro
Global settings for vendor organisation
settings for vendor synchronisation per backend .
regards
muthu

Posting payment to a company with sole proprietor

Hi,
Need you experts to help me address my query.
For companies with sole proprietor, the bank account name is
usually the owner's name instead of the company name. Currently, for
such cases, we amend the vendor name from the company to the bank
account (owner) name. Hence, payment is posted and made to the owner
not the company.
Is there a way (other than factoring) to maintain the vendor record
against the company name without affecting payment made to the owner's
bank account ?
Please help.
Thanks & Regards
Ammu

Hi Ammu,
First you should understand the system of SAP in FI. The purpose of spilitting is for legal records and statutory report submission.
In your case it is very clear the business has been operated and working according to the proprietor (Proprietorship). Here as per the income tax (other acts wont affect- Partnership act, companies act etc) authority all the transaction has to be done throught the owner's bank account only.
The same thing you can follow for your vendor. While creating the vendor you should assign vendor's (owner's bank account) bank account.
In your first paragraph you have mentioned "Hence, payment is posted and made to the owner not the company" here there is any question for company. Because your business transaction is not comes under "Companies Act 1956".
Please read the basis exercise in the books of "Direct Tax".
I am not clear your second paragraph: -
Is there a way (other than factoring) to maintain the vendor record
Against the company name without affecting payment made to the owner's
Bank account? - PLEASE BRIEF ME.
If you have any further clarifications please let me know.
Warm Regards,
Sivakumar Sathiyamoorthy

Tolerance Limits with Date and quantity

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

Go to SPRO - Material Managemetn - LIV - Invoice Block - Set Tolerence limit.
USe company code and maintain a value for ST
ST: Date variance (value x days)
The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.

Set up Tolerance Limits with Date and quantity for GR

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

hi,
You can do one thing...
Activate the SLED check...
BY this when the date goes earlier or late from the expected date, then system show you the messages like:
1. Earliest delivery date is DD.MM.YY..
2. Expected delivery date was DD.MM.YY...
In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
Via SPRO settings...
SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
Regards
Priyanka.P

I am a sole proprietor business owner (work from home graphic designer) and I have a customer who wants to pay me via Apple pay. Can I accept her transaction? How do I get that rolling?

I am a sole proprietor business owner (work from home graphic designer) and I have a customer who wants to pay me via Apple pay. Can I accept her transaction? How do I get that rolling?

Apple Pay: Merchants FAQ - Apple Support

Suggested list size is limited with 10 elements using autoSuggestBehavior

Hi,
I am using the autoSuggestBehavior with inputListOfValuesComponent. suggestedItems come from a ViewObject. When I type a any letter the suggested items list is always is limited with 10 items(event the suggested list is longer) and user must go to another page to see the rest. Is there a way to increase the suggested list size?
Thanks in advance..

With the latest release of Jdeveloper we have a new component with auto suggest, so you dont need to implement any kinda of listeners or javascrips.I have used it as below ;
<af:inputListOfValues id="gittigiYerTitleId" searchDesc="Ara"
popupTitle="Search and Select: #{bindings.ViewMisdt626_1.hints.GittigiYerTitle.label}"
value="#{row.bindings.GittigiYerTitle.inputValue}"
model="#{bindings.GittigiYerTitle.listOfValuesModel}"
required="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.mandatory}"
columns="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.displayWidth}"
shortDesc="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.tooltip}"
partialTriggers="selectGidisTuru"
binding="#{backingBeanScope.backing_app_yeniEvrak.gittigiYerTitleId}">
<f:validator binding="#{row.bindings.GittigiYerTitle.validator}"/>
<af:autoSuggestBehavior suggestedItems="#{bindings.GittigiYerTitle.suggestedItems}"/>
</af:inputListOfValues>
Where the suggestedItems list comes from a view object. My problem here is when I type any criteria it offers me only the first 10 items for the rest I must go to the search page offered again by the component. This ussage is not being so friendly for the users. I thought that there must a setting for the size of the offered items list.

Architecture Limitations with Replication of VM connected with Physical Mode RDM

what are Architecture Limitations with Replication of VM connected with Physical Mode RDM in vsphere replication. Why VMware is not supporting this?

vSphere Replication does not work with physical mode RDMs. This is because of the way that vSphere Replication and physical mode RDMs work.
As outlined in this: VMware KB: Difference between Physical compatibility RDMs and Virtual compatibility RDMs
It isn't currently possible for VR to do what it needs to do with physical mode RDMs.
Does this answer your question?

Limitation with Eloqua Bulk API

Hi,
We are planning to develop a connector for data extraction from Eloqua to load into Birst and would like to understand any limitation with Bulk API.
Thanks,
Anil

Hi Anil,
The below listed limitations are present in the Bulk API Guide:
4.12 Bulk API Limits
4.12.1 General Limits
Number of syncs permitted per 24hr period: 2000 This limit is not currently enforced, but is logged and monitored.
4.12.2 Import and Export Limits
Maximum import size: 32MB. The import will fail if the data source is larger than 32MB. To import a data source larger than 32MB, you can perform multiple POST requests. For extremely large data sources, the import should be synced periodically, i.e. once 250 MB of data has been POSTed.
Maximum export size: 50,000 records per page. The export will fail if you attempt to export more than 50,000 records in a single page at one time. If you need to export more than 50,000 records at a time, you can filter your request by date range and make separate requests for different date ranges.
Maximum fields that can be included in one export: 100 fields. The export will fail if you include more than 100 fields in the export definition.
Maximum sync size: 5,000,000 records. The sync will fail if you attempt to sync more than 5 million records
If planning for specific large exports, you can create filter statements in your export definition.
-Syed.

Ical limitation with all day events

I fill up my calendar quite a lot with all day events. The space allowed for the events is limited so some events don't show. There should be a stretchable bar to allow visibility or not.
I wonder how to pass on this suggestion to Apple.

Agrr, I couldn't find how to delete this question. As often when i get to ask a question i get the answer. My events don't disappear, they are there and there is a scroll bar that shows when i scroll in the all day event part.

SQL Server Express Performance Limitations With OGC Methods on Geometry Instances

I will front load my question. Specifically, I am wondering if any of the feature restrictions with SQL Server Express cause performance limitations/reductions with OGC methods on geometry instances, e.g., STIntersects? I have spent time reading
various documents about the different editions of SQL Server, including the Features Supported by the Editions of SQL Server 2014, but nothing is jumping out at me. The
limited information on spatial features in the aforementioned document implies spatial is the same across all editions. I am hoping this is wrong.
The situation.... I have roughly 200,000 tax parcels within 175 taxing districts. As part of a consistency check between what is stored in tax records for taxing district and what is identified spatially, I set up a basic point-in-polygon query
to identify the taxing district spatially and then count the number of parcels within in taxing district. Surprisingly, the query took 66 minutes to run. As I pointed out, this is being run on a test machine with SQL Server Express.
Some specifics.... I wrote the query a few different ways and compared the execution plans, and the optimizer always choose the same plan, which is good I guess since it means it is doing its job. The execution plans show a 'Clustered Index Seek
(Spatial)' being used and only costing 1%. Coming in at 75% cost is a Filter, which appears to be connected to the STIntersects predicate. I brute forced alternate execution plans using HINTS, but they only turned out worse, which I guess is also
good since it means the optimizer did choose a good plan. I experimented some with changing the spatial index parameters, but the impact of the options I tried was never that much. I ended up going with "Geometry Auto Grid" with 16 cells
per object.
So, why do I think 66 minutes is excessive? The reason is that I loaded the same data sets into PostgreSQL/PostGIS, used a default spatial index, and the same query ran in 5 minutes. Same machine, same data, SQL Server Express is 13x slower than
PostgreSQL. That is why I think 66 minutes is excessive.
Our organization is mostly an Oracle and SQL Server shop. Since more of my background and experience are with MS databases, I prefer to work with SQL Server. I really do want to understand what is happening here. Is there something I can
do different to get more performance out of SQL Server? Does spatial run slower on Express versus Standard or Enterprise? Given I did so little tuning in PostgreSQL, I still can't understand the results I am seeing.
I may or may not be able to strip the data down enough to be able to send it to someone.

Tessalating the polygons (tax districts) is the answer!
Since my use of SQL Server Express was brought up as possibly contributing to the slow runtime, the first thing I did was download an evaluation version of Enterprise Edition. The runtime on Enterprise Edition dropped from 66 minutes to 57.5 minutes.
A reduction of 13% isn't anything to scoff at, but total runtime was still 11x longer than in PostgreSQL. Although Enterprise Edition had 4 cores available to it, it never really spun up more than 1 when executing the query, so it doesn't seem
to have been parallelizing the query much, if at all.
You asked about polygon complexity. Overall, a majority are fairly simple but there are some complex ones with one really complex polygon. Using the complexity index discussed in the reference thread, the tax districts had an average complexity
of 4.6 and a median of 2.7. One polygon had a complexity index of 120, which was skewing the average, as well as increasing the runtime I suspect. Below is a complexity index breakdown:
Index
NUM_TAX_DIST
1
6
<2
49
<3
44
<4
23
<5
11
<6
9
<7
9
<8
4
<9
1
<10
4
>=10
14
Before trying tessellation, I tweaked the spatial indexes in several different ways, but the runtimes never changed by more than a minute or two. I reset the spatial indexes to "geometry auto grid @ 32" and tried out your tessellation functions
using the default of 5000 vertices. Total runtime 2.3 minutes, a 96% reduction and twice as fast as PostgresSQL! Now that is more what I was expecting before i started.
I tried using different thresholds, 3,000 and 10,000 vertices but the runtimes were slightly slower, 3.5 and 3.3 minutes respectively. A threshold of 5000 definitely seems to be a sweet spot for the dataset I am using. As the thread you referenced
discussed, SQL Server spatial functions like STIntersect appear to be sensitive to the number of vertices of polygons.
After reading your comment, it reminded me of some discussions with Esri staff about ArcGIS doing the same thing in certain circumstances, but I didn't go as far as thinking to apply it here. So, thanks for the suggestion and code from another post.
Once I realized the SRID was hard coded to 0 in tvf_QuarterPolygon, I was able to update the code to set it to the same as the input shape, and then everything came together nicely.

Resolution Limitations with Second Display

What´s the maximum video resolution macbook MB403 can drive?
I´m using a second display (Samsung wide screen syncMaster 226BW, and after configuring it at 1680x1050 - which is the usual resolution for this type of display, I realized that the actual resolution was not greater of 1280x800, although the video configuration set indicated and normaly accepted the 1680x1050 as the second display resolution.
Is there a configuration setting I have forgotten?
It seems that 1280x800 is the higher resolution accepted by macbook own display. Is there any relation or limitation related with a second display?
Thanks.
Reginaldo Canova

So does anyone have experience with the Envision 22" LCD display (G2219w1)?
It works well with my 5-year-old PowerMac G4 BUT with the MacBook the whites and grays are tinged with color and the overall colors are overly saturated. Moreover, the pictures are grainy and text is muddy. I can't seem to find a good match of resolution after trying several combinations. It's reasonably sharp at 1680x1050 but the image is quite small (about 3" border on all sides which is pretty much the same size as the MacBook).
Is there anything I can do? I've tried lots of adjustments on the LCD and in the display configuration on the MacBook.

Why ulimit fails for stack size in Sol 10 update 11 with project settings?

Hi,
The following command fails on Solaris 10 update 11 platform. It works fine with update 10. Something has changed in update 11. Any ideas?
ulimit -Ss 1 (or any number for that matter)
/bin/ksh: ulimit: exceeds allowable limit
We have the following setting in project as well.
process.max-stack-size=(basic,137988707188736,deny)
process.max-stack-size=(priv,137988707188736,deny)
Thanks for your help in advance.
Samy

Here are the values from the project command if you anyone is wondering
update 10
======
cat /etc/release
Oracle Solaris 10 8/11 s10x_u10wos_17b X86
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Assembled 23 August 2011
prctl -n process.max-stack-size $$
process: 10189: /bin/ksh -i
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-stack-size
privileged 125TB max deny -
system 125TB max deny -
update 11
======
cat /etc/release
Oracle Solaris 10 1/13 s10x_u11wos_24a X86
Copyright (c) 1983, 2013, Oracle and/or its affiliates. All rights reserved.
Assembled 17 January 2013
prctl -n process.max-stack-size $$
process: 24776: /bin/ksh -i
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-stack-size
basic 125TB - deny 24776
privileged 125TB - deny -
system 125TB max deny -

Bandwidth limiting with 2504 WLR and 3602E AP

Hello,
My QA team needs to test number of special connectivity scenarios where their wireless connection has a limited bandwidth.
Ideally, I would like to provide them number of SSIDs each of which has different bandwidth limitation.
But so far I did not find a way to apply any bandwidth limitations to my 2504 Wireless controller and the 3602E AP.
QoS has only 4 pre-defined modes which can't be set to a specific limit...
Any help/advise would be highly appreciated!
Thank you,
Mark.

Didnt realize this was not on the 5508, +5 Scott.
I guess the next best option is to ACL/QOS on the wired side for that subnet in question.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

FireFox limitation with WD ABAP

Hello,
We have the webshop built in WD ABAP. It is not integrated in the portal. Stylesheet is done with help of ThemeEditor. We find certain limitations in the way it is displayed with FireFox. I would appreciate if someone could help:
1. Dynamic links to action is not been displayed.
To display the menus on the left we have the Links to action filled in the table(present in the layout). This is done dynamically. We can see this links in the IE but not in FireFox. However if I place the link to action UI element in the layout at designtime, it is displayed with FireFox.
2. The pageHeader font size is changed manually in css to give right fontsize (since no option to change from the Theme Editor) is displayed correctly in IE but with Firefox there is no change. (Same as original)
Can somebody please help me resolve this issues at the earliest?
Many thanks,
Dharmi

Hello Rainer,
Thank you for your prompt reply. The version we have is
SAP_BASIS 700 0009 SAPKB70009 SAP-Basis-component Basis Support Pack.
Is it possible for you to email me the PAM, I could not find the one which points to Web Dynpro ABAP (Just Web Dynpro) at service.sap.com/PAM?
If yes, please do so at [email protected] or [email protected]
Thanks much,
Dharmi
Message was edited by:
Dharmi Tanna

Sole proprietor flag - limitation with BBPGETVD

Similar Messages

Maybe you are looking for