Solid Edge-SAP integration

Hello,
1. I am having cad files with names, like pump.par, 1234-PUMP.par. In Solid Edge-sap integration there is an option in which we can have the file name as document name when we create a dir. As document numbering is internal or external with only numerical, am I correct in saying for this in Document Type number assignment we would put 'external number range' with user exit and in User Exit design something with help of available Badi's (with some developers help) and then only file names could be  passed to DIR names.
2. Also in solid edge-sap integration its written that for different versions of dir, the files below them should have the same name otherwise the links get lost, for example SEP-pump-000-01 has file name pump.par under it and also SEP-pump-000-02 has file name pump.par under it , but we make changes in design
Thanks,
Paddy

Dear Stefan,
Thanks a lot for your reply. The second answer is very useful. It's good to know files names in dir versions would be "version free" in SE-SAP integration.
You lost the first question. I want to use option, 'set DIR name as file name', so if lets say file name is abc.par, the DIR name would be 'abc'. My question is what number range should I define for the document type. I assume 'external number range with user exit' would be used to make this happen and development would be needed,. Am I correct.
Thanks,
Sachin

Similar Messages

  • Configuration of Solid edge - SAP

    hi all,
    my 1st Q is,
    <b>where are the configuration files of Integration (SAP- solid edge) are stored.</b>
    2nd
    <b>can we modify them using external program.</b>
    i want to know the file as i intent to copy single configured file to several systems.
    <b>eg:</b>
    for inventor cfg files are stored in C:\program files\sap ag\autodesk config\
    and whenever we make changes in config this file gets updated.
    so i can copy this file to no of systems.
    i want similar for Solid edge
    thanx
    Niranjan

    Hi Rehman
    there s no such directory
    i have also checked temp folder in my local settings and also in windows\temp
    no such document found...
    <b>can u tell me a specific file (or may be extension of file ) to look at i ll search on  my pc?</b>
    Thanx

  • How do I pass Solid Edge- SAP configs on multiple computers

    Hello All,
    How do I pass the 'User/System preferences -configs I did on Solid Edge side' on multiple computers on which I am installing the SE-SAP interface. Do I have to go to each machine, open the user/system preferences and then check the boxes, which I did while prototyping.
    How can this process be automated.
    Thanks,
    Sachin

    Hi Sachin
    Goto <b>Link Log</b>
    and press <b>SAVE button</b> in right bottom corner
    choose <b>REG file option</b> and export the entries
    go to any other PC and run the reg file
    i Hope this answers your question.
    Niranjan
    Award if Useful

  • BO Edge SAP integration for mid size companies

    Hi
    Refer http://www.intelligententerprise.com/showArticle.jhtml?articleID=216403200.
    It says here Edge integrates with SAP. Does anyone know if you still required BI NW for this? I've only found that you still need SAP BI NW for this, otherwise you'll only be able to use Crystal reports directly off SAP ERP. Is my logic right, or has SAP come up with Edge integration directly to ERP with Edge serving as it's own data warehouse.

    Hi,
    not sure where you received the information that Web Intelligence will talk to the ERP system by Enhancement Package 04 but I think you are mixing up things here. Part of Enhancement Package 05 for the BusinessSuite (Q4 2009) is an option to expose ERP data to the BI system without any data modelling which then can be used via a BW query.
    Ingo

  • Solid Edge Cad Integration Numbering

    Hello All,
    I am involved in SE Cad Integration. I am using 'internal numbering' schema for creating DIR's for the Part. I want the Drawing DIR to be same as Part DIR but starting with a letter 'D'. For example if a part DIR is 100025/SEP/000/00, when I create drawing out of it and go to Cad Desktop, and furthur create DIR for the drawing, the DIR number should be D100025/SED/000/00.
    How can I achieve the same.
    Thanks in adavnce.
    Sachin

    Hello Sachin,
    perhaps in the RENAME_AND_ADD_FILES method you can read the CAD-Structure one level down, get the document number and add an "D" at the beginning ?
    Stefan.

  • Questions on Cad Integration- Solid Edge and Solid Works

    Hello All,
    I had the following questions related to CAD Integration:
    1. I have my CAD files saved in working directory. I create DIR for them from CDESK (Cad View - Create Document) and want to rename the files as Document Number_Document Description. How can I achieve the same. Again, I want to do the same from CDESK (CAD VIEW)
    2. On Solid Edge CAD integration, I have noticed sometimes when I register the DLL's the 'User/System Preferences from SAP-PLM' on Solid Edge side does not pop up. Can someone tell me what might be the reason and how to fix it. Also if I already registered the DLL's and want to clean them (remove them), so that to try to register DLL's again, where can I go to remove them from Windows registery file
    3. In Solis Edge is it necessary to check in and check out the SEC application (representing .cfg ) in SEA document type. I have noticed if I have the .cfg in my working directory and I check in SEA without .cfg and if  some other person checks out the SEA, the .cfg gets created for him on the fly in his working directory.
    Thanks in advance,
    Sachin

    Hello Sachin,
    1. please have a look at and implement note 645365 - "CDESK: Attaching Solid Edge .cfg file when creating doc.".
    2. If you registered the DLL's once and you want to update them, you only have to copy and replace the old ones with the new ones. You do not have to un-register the old ones.
    The problem with the disappearing Menu-Items or symbols can only be solved by restoring the SolidEdge-Registry-Path...
    3. You can only checkout the CFG-Files if you use the CAD-Desktop.
    You have to add the WSAPPL SEC (*.cfg) to the applications in the CDESK_CUS.
    (CHECKIN, CHECKOUT and COPY)
    Stefan.

  • SAP Integration KIT FOR SAP BO Edge 3.1 Trial

    Hi,
    The SAP Integration Kit 3.1 for BO Enterprise 3.1 is the same for BO Edge 3.1 Trial or there is a specific for BO Edge?
    Because I did the download of BO Edge Trial in the SAP BO area, and install the SAP Integration KIT but the system doesn´t work.
    thanks,
    Rodrigo

    i think that there is a specific Integration Kit for Edge
    good luck
    Amr

  • Creation of JT through SE-SAP integration

    Hello All,
    The inbuilt JT converter SePVADP.exe in Solid Edge when creating the JT's for first time when I check in the document, is creating the JT's with object file extensions for example: If I create a part Bracket.par, the JT which gets created and checked in is Bracket.par. jt. If I create an assembly it creates a JT like XXX.asm.jt I dont want to have these extensions like .par, .asm before JT.
    Is their a way to get rid of the same.
    Thanks,
    Sachin

    Hi,
    Your question is related to SAP Add-On instead of Integration Technology.  Please post it there.
    Thanks,
    Gordon

  • Solid Edge help

    Hi all
    we have integrated Solid edge with SAP by integrator from Gedas.
    Can anyone has help related to Link Log >>
    particularly for
    <b>Link Log >> Solid edge tree >> Properties</b>
    thanks
    Niranjan

    Hi Niranjan,
    as far as I know you can define in the section 'solid edge tree -> properties' the file properties that are displayed in the structure tree for the Solid Edge objects, like SAP document number, SAP description, status, etc.
    So just select -> properties -> change -> and select the properties you like to see.
    Best regards,
    Daniel

  • Crystal Report XI R2 compatablity with SAP Integration kit

    Hi All,
    we have suggested to one of our customer  the Customized pack of BO XI Edge series which include the licensing of Xcelsius , WEBI , Universe designer, SAP Integration kit and Live office...
    He dont want to pay extra for taking the license for cryatal report 2008 as they already using the Crystal Report XI R2 version which they use to do reporting on non SAP data.
    My question is :
    1 - Now they want to do reporting ove SAP data using the existing CR solution they have is it possible ??
    2- Will the integration kit support the CR XI R2 version ??
    3- Can he publish the Crystal Report created by CR XI R2 to the Business Object Edge Series plateform ??
    They just want to use CR to do reporting on data from R/3 side .
    Kindly suggest.
    Regards,
    Mishra,Vibhav.

    Dear Ingo,
    Thanks for the reply.
    Actally we have suggested to our client the latest Edge Series Standard pack solution , excluding the crystal report licensing.
    My question is will the integration kit which comes along with the Edge series will support the existing Crystal Report XI R2 and can the it be integrated with BOE(can he publish the reports created with the earlier version to the Business Object plateform).
    If the above sceanario is not possibe then we have to purchse the older version of integartion and i doubt if we can purchse it stand alone in that case we would be having two integration kits running to solve the purpose.
    Kindly suggest.
    Warm regards,
    Mishra Vibhav

  • Macbook and Solid Edge?

    Hi,
    I want to start my engeneering study next year and am planning on buying a macbook for that. I would go for the white 2.0ghz one with 2 gig ram because I'll use it for audio production too.
    Now my question is: How fluently does Solid Edge work with the macbook? (I'll install XP on it with bootcamp)
    I know i'll be using this program quite alot so it's important that it works OK.
    Thanks in advance
    PJ

    Looking at the requirements for the application, it sounds as if a MacBook Pro may be a better option. The integrated Intel GPU found in the MacBook is pretty much okay for basic office applications and, in some cases, low to moderate resolution 3D games. The requirements for Solid Edge state "It is recommended that you use a graphics card specifically designed for CAD applications.". The Intel GMA 950 is far from being a card designed for CAD applications. More information can be found here:
    http://www.solidedge.com/graphics/default.htm
    It looks like they've tested it on pretty much high-end mobile graphics solutions only. The minimum card requirements from the site are shown below:
    Solid Edge will run on any graphics driver that supports Windows 2000® or Windows XP®. Contact your graphic card manufacturer to determine whether their graphics adapter/driver supports these operating systems.
    For optimal performance, it is recommended that you use a graphic card specifically designed for CAD applications.
    Note 1: A number of consumer cards are based on nVidia TNT and GeForce chipsets. Utilizing these graphic cards may result in decreased performance when opening multiple windows in Solid Edge. The decrease in display performance is related to limited driver support for Unified Back Buffers. nVidia recommends the Quadro line of cards for CAD applications, as it does not have this limitation.
    Note 2: Utilizing a consumer card, one not specifically designed for CAD applications, may result in decreased performance or poor display quality in Solid Edge.
    Note 3: Running with extremely high screen resolution and color depth increases the memory requirements on the system and may result in apparent performance degradation. If experienced, reconfigure the display system to the recommended resolution and color depth for improved performance.

  • Cad - Solid Edge std parts...

    Hi all
    In Cad Integration Module
    <b>Is there any way by which i can restrict the check in of standard parts (like Fastners) in Solid Edge?</b>
    I dont want to check in the original..or can we create dummy doc.
    Regards
    Niranjan

    No response???

  • Solid Edge Document Types

    Hello DMS Guru's
    Can someone help me out with the number of Solid Edge/Cideon sap document types and their extensions
    With Regards
    Jo Pz

    Hi,
    One suggestion is to create a new document type for the files extensions that you want to handle.
    This can help you a lot to have more control on your activity with the external system documents too.

  • Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

    Hi all,
    I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
    Now when I try to go to the login page of CMC or InfoView I get an error:
    type Status report
    message /PartnerPlatformService/service/app/logon.do
    description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
    Is the login page trying to look for the SAP authentication page that was removed ?
    Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
    Thanks for ideas, Timo

    Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
       <context-param>
            <param-name>config.logon.service.context</param-name>
            <param-value>/PlatformServices</param-value>
        </context-param>

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

Maybe you are looking for

  • Problem with Itunes in my Mac

    This is my situation: for tha last three days: We could not complete you Itunes store Requuest: Itunes Store is Temporary unavailable, try later,  help.

  • How to get out of N97mini music player in endless ...

    Hi, here's a tip for those of you who have had the same problem as I. I have found that the music player enters into an endless DRM -check loop if I accidentally press a second time on a song which is DRM-protected before the DRM-check has been initi

  • Taxinn  and Pricing procedure

    Dear MM Experts,                       I am working on ECC 6.0 and decided to implement taxinn procedure. I have made both procedures and it is working for service tax is ok. But It is not working with VAT/CST taxes. It is highly appreciable If any o

  • Cost of Data Mininf option

    Any idea how much the data mining option in Oracle 9i costs?

  • Sorting by Artist

    Hello! I just bought an iPod Nano 6th generation. Is there a possibilty to sort your playlist and music by artist just like in iTunes? I couldn't find it! Thanks... Moreno