Solid state drive Install

Will solid state drives work on the iMac Desktops?

There have been many thousands of posts here about this. Read the More Like This: links at right, and the More Like This: links that will appear on each of those pages, and so on.

Similar Messages

  • My Mac Book Pro has just had a new memory and solid state drive installed. After the installation, the Lightroom tools all became grey. There is no longer any color on the screen other than my picture. Even the color sliders are grey.  Can you please help

    My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!

    My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
    Sliders are white, look different | Mac OS X 10.9 Mavericks
    Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

  • SAT II 2.5" Solid State Drive installed in my Toshiba U200 Notebook won't bootup

    I want to install my SSD in my laptop.  Actually, I already have.  First, I cloned the old HDD, using Acronis Migrate Easy 7.  I also used a USB enclosure to do the cloning.  As far as I can tell, I have a perfect clone of the old drive on the new drive.  My problem is that the laptop will not bootup with the new SSD.  I get error msg: a disk read error occurred.  Press Ctrl+Alt+Del to restart.  I looked in the bios (system setup) and see the Built-in HDD = Primary IDE(IFQH/IRQ14).  Can this setting be changed?  How do you access it.  What I really want to know is did I make a mistake in buying this drive for my old U200?  Thanks, stanthemanc

    You sound like a couple other threads and people.
    The power management in the 2008. 10.8.2 trouble but 8.3 seems okay.
    SSDs always take special care and instructions for handling.
    You do not want to try do you realize that "Open Firmware" died with PowerMacs and you are on EFI? Actually yours got the first taste of UEFI / EFI64 which is of itself enough "off" the standard that it should have been updated if possible, is not blessed certifed by Apple and Microsoft for UEFI under Windows.
    And you have two PCIe 2.x slots and two that are 1.1 slots. Which makes for issues too.
    Things that may be issue and not obvious:
    PRAM battery
    Keyboard or its cable
    any and all external devices
    PCIe cards
    Your video card (which is not listed)
    Faulty FBDIMM(s)
    The fact 10.8 runs on other hardware has no bearing on how well it was tested and implemented on Early 2008 which are entirely different hardware, firmware, processors, etc.
    I saw one person that the front fan had so much dust it was not cooling the system down.
    Which leads to: what are you using to monitor system thermal sensor temp readings?
    And, please do (on a new fresh clean install of Mac OS) uses SmcFanControl 2.4+
    I would hope you kept 10.6.8 and can dual boot, but otherwise, create one for now for testing, some of your reading should have come up with those where it works with SL and had issues with ML (and Lion).
    The lack of Rosetta. The need to do a clean install of ML rather than update to new OS over SL (and carry around old stuff for years and multiple OS's).
    Sometimes the best test for RAM is to replace with known good new set ($31 Amazon).
    Don't rule out video card, especially if it is still the OEM 2600XT or 8800GT.

  • Can a A945US laptop with Vista have a solid state drive installed?

    It doesn't appear many questions get answers around here... I can forsee driver problems...

    Hi:
    Many times questions don't get answers because people just don't know. No one is deliberately ignoring you.
    There are hundreds of HP notebooks out there, and unless someone has actually installed (or attempted to install) a SSD in that particular model, all we can do is speculate.
    I will offer you my opinion. That is all I can do, since I do not own your model notebook and I have never installed a SSD in any notebook or desktop PC.
    Let's start with the manual...
    http://h10032.www1.hp.com/ctg/Manual/c01295803.pdf
    Chapter 3, page 21 lists the supported drives for your notebook series.  No SSD's are listed as optional drives.
    Let's take a look at your PC's architecture...
    Your notebook either has the GM965 or the GL960 chipset. I can't say for sure since I am not quite sure if the T2390 works with just the GM965 or the GL960 or both.
    You can run the Intel chipset ID utility to find out what chipset you have.
    http://www.intel.com/support/chipsets/inf/sb/CS-009266.htm
    If you have the GM965 chipset, theoretically, it should.
    You can see if your notebook is listed in this Crucial site as supported for an SSD
    http://www.crucial.com/uk/store/ssd.aspx
    And according to the site, a SSD is supported.
    http://www.crucial.com/uk/store/listparts.aspx?model=Presario%20a900%20Series&Cat=SSD
    I just happened upon the Crucial UK site. I'm sure the crucial US site has the same search engine.
    Hope this helps,
    Paul

  • Could a solid state drive leak?

    Have another thread on the go regarding fluid leaking from my white MacBook. Exploring avenues outside of the mac itself now. Apple want it taken to the an apple store for immediate inspection but warned I could end up being charged for repairs due to accidental liquid damage, although I didn't damage the machine. No liquid was place around or near the machine. This was a chemical liquid.
    My question is, could the solid state drive installed in the machine have leaked and caused this problem? If its still under warranty and has damaged my whole computer could they be liable to repair or replace this machine? All answer gratefully received. Desperate for advice in this matter,

    I would be surprised if a SSD contained any liquid, but your best source for that information would be the manufacturer of the SSD.
    Best of luck.

  • Can I install a solid state drive in my CQ62-215DX

    I need to replace my hard drive in my laptop and I'm curious first on whether or not I can install a solid state drive in this laptop and if so, are there any recommendations?

    Hi,
    Yes you can, SSD's are much cheaper now. You can buy from the following reliable vendor, it guaranties its products will work:
        http://www.crucial.com/upgrade/HP+-+Compaq-memory/​Presario+CQ62+Series/Presario+CQ62-215DX-upgrades.​...
    You can buy from 120Gb to 960Gb. I bought one Crucial 960Gb last week but from Amazon
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    If the bank account permits, I suggest getting a 1 TB SSD anyway.  One cannot have too much storage. 
    Unless you are having issues with your current installation, a 'clean' install is not necessary.  It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap.  The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
    Ciao.

  • Can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid".

    Hi, anyone know. can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid". any compatibility issues?

    "In addition to TRIM, I just stumbled on this discussion. One of the posters is having some odd difficulties with that combination."
    Yup and that's why I've avoided any 3rd party SSDs.
    I only deal with:
    http://eshop.macsales.com/shop/SSD/OWC
    I've done 6 so far and no problems at all; formatting, installing nothing. Total no brainer. I did have a small formatting problem on my last one but I called them and solved the problem before the guy got on the phone. He immediately offered a return sticker (RMA) but I didn't need it and the MBP is running fine.

  • Should I install a Solid State Drive..?

    Hello I am editing and rendering HD 1080p and sometimes 4k video from an XD Cam in Final Cut Pro 7 running on a 17" 2011 MacBook pro i7 2.2ghz, 8GB DDR3 1333mhz RAM with 720GB 5400rpm Hard Drive. the video is captured on an external 2TB Hard Drive connected via Fire Wire 800. What I would like to know will it be worth me installing a OCZ Vertex 4 512GB SATA 3 Solid State Drive inside my computer and putting 16 GB of RAM in. will it make a difference in the performance of quality, rendering times and other functions on my software and video I output to Blu-Ray..? remembering that the video is coming from the fire wire 800 drive and going back on there until I burn it to blu-ray. Would I need to set my scratch disk to my SSD to see any benefits of having a SSD instead of a normal HDD. Cheers Danny.

    Why not use a Thunderbolt drive? Adding ram isn't going to help but won't hurt. FCP 7 address only a max of 4 GIGs of ram. Your weakest link is the 5400 rpm drive.
    I'm thinking about getting 2 Thunderbolt drives. One for the System OS and the other for media storage.

  • X200 SSD (Solid State Drive) with clean-install of Vista or XP?

    Hi all,
    I apologize for starting a new thread on a new forum; however, I am running out of research time.
    I am about to buy a X200 with the 64GB SSD (Solid State Drive) (and it needs to be bought by tomorrow Can I ask couple questions? :
    1) I am legally using this for business purposes with an MSDN license, so I can and will install any clean OS immediately. With the option to install any Windows OS; which will work best [or at all] with the SSD? (I have read conflicting articles, but most are outdated due to SSD's being so new.)
    2) With only the SSD and without a MediaBase, I read several guides such as This Thread on this Forum on how "fun" a clean install can be...are there any extra difficulties with the SSD?
    I am a software engineer and would normally piece this together my research; however, I am running out of time before I have to decide if the SSD is a viable and installable option at this time (and if I should buy it!)
    Thanks a lot!
    MikeY

    Hello to all.
      I'd like to know why AHCI mode is being suggested to use for SSD's?  Please tell me why. I just don't understand. I think using Raid 0 Array would be the better choice. How does AHCI mode vary compaired to Raid 0 ?  Is AHCI a better Mode? Does it give better performance then Raid 0?
     I see alot of you are having problems setting up SSD's.  I have read the first thing you need to do is make sure the firmware on any SSD you use should be updated.
     I also see a lot of people here talking about the need to install Raid drivers.  This is true with all other OS's, but I have found that after a fresh format, even on a new HD, I just installed Win 7 64 bit ultimate I went right into device manager to see what drivers are needed, & to my surprise all the drivers were already installed, including Raid driver & controller. I set up my Raid 0 Array at the F10 prompt, rebooted with OS disk with master drive after setting up boot sequence, & continued from there no problem with 2 150GB Raptor HD's in Raid 0.
     I have gone as far as to use a Western Digital HD CD utility disc that has a write zero utility & used it to fast write zero's to the first 63 tracks & sectors including track 0 sector 0 where the MBR is written, & I've reformatted & reinstalled Win 7 from that point, & all the drivers still get auto installed. You can go right into device manager & see for your self. The only driver I ever need my be a sound driver update & Graphics driver.  I'm not forgetting that the drivers that are auto installed are generic & may need updating, but what I'm saying is, I haven't seen any yellow question marks or exclamation points in device manager like you do with other OS's before Win 7.

  • Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

    Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

    Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

  • Mac Pro fans run full speed after installing Solid State Drives

    I recently visited the Genius Bar at my local Apple store because my Mac Pro's fans were running at full speed after installing 2 solid state drives. The genius told me that it was because the drives themselves are so small they don't touch the metal tab on the motherboard that reads the drive's temperature, so it defaults to running full speed. Does anyone know how to fix this problem? I've tried smcFan Control but it doesn't let me set the actual fan speed. I'm getting 5200 rpms on my Boost A and B fans, and this causes an insane amount of noise. Can anyone help?

    Which model Mac Pro?
    I have an SSD in a 2009  (MacPro4,1). I removed it from the 2.5 in stamped metal can, and just installed the bare circuit board onto the SATA connector. It does not make any contact with the metal tab below the SATA connector. The only trouble I have is that Tech Tool Pro says its temperature is not optimum when it does disk tests.

  • Do I need a mount to instal a 2.5 inch solid state drive in my iMac?

    Hello all,
    I need to replace the hd in my iMac and was thinking of replacing it with a solid state drive. I found a 2.5 inch hard drive but before I purchase the drive I was wondering if I am going to need a different mounting plate as well? The drive I had in mind is OCZ Agility 4 AGT4-25SAT3-512G 2.5" 512GB SATA III MLC Internal Solid State Drive (SSD).
    Thank you for nay help.

    Looks like an old unanswered question, you need a cheap and simple U-like metal stand, which has the contour of a 3.5 inch HDD, upon which you fix the SSD or any 2.5 ' HDD. This is not absolutely necessary, but you need to fix is somehow there, otherwise you need an adhesive strip or else.

  • Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop

    I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model  and was bought with the machine.
    The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
    The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
    How do I install this HP upgrade on my new HP laptop?

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    YES, Windows 8 and 8.1 should be supported.
    Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
    Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Upgrade my Macbook Pro 17" with solid state drive and RAM?

    My MBP is a 17" mid-2009, 2.8 GHz Intel Core 2 Duo, Memory  4 GB 1067 MHz DDR3, Graphics  NVIDIA GeForce 9600M GT 512 MB.
    I am an architecture student. I use 3D modeling programs like SketchUp, Revit, AutoCad, etc. According to these software websites, my MBP is sufficient. However, when I'm running these programs, I get the apple "beach ball" a LOT, along with a lot of lagging even when I'm working on simple models. After doing some research, it appears that upgrading my RAM to 8GB (my model's max capability) and buying a solid state drive would help my MBP run much faster and much cooler.
    My questions:
    1. What brand and exact product #/link to this (if possible) of RAM (2 x 4GB sticks) and SSD should I purchase?
    2. Which SSD GB option should I purchase? I chatted with OWC online and was given this variety of SSDs.
    http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
    3. I was also given this product bundle recommendation. It's cheaper than buying everything individually, but I'm not sure if I need the tools and I don't understand the purpose/advantage of having the "OWC Express Silver Enclosure".
    http://eshop.macsales.com/item/OWC/YSSDMP240/
    I just want my MBP to run as fast as possible while running my modeling software w/o spending an arm and a leg if possible. But I don't know if it's worth the trouble and expense to upgrade my current MBP, which I love, or just getting a new MBP or Mac desktop. And if I should just get another Mac, I don't know which one I should get.
    Another thing I have seen is the Mac Mini. Is it possible to plug this or any other external device to my MBP in order to accomplish my performance goals without having to modify my MBP or buy another Mac?
    This is the first time I've posted any help questions to the Apple Support Community. I really appreciate any advise you Mac experts can give me. I called one of the Apple Stores, but I was definitely not satisfied with the inexperienced rep's answers.
    Thanks!

    1. OWC or Crucial are recommended sources for memory. You can usually find a 5% off and free shipping code for Crucial on retailmenot.com. On crucial just key in your system information in their memory selector.
    2. Your system likely supports SATA II speeds, so the SSD OWC pointed to would work. I installed one in our 2010 mac mini and it's working well. I originally installed their 6G drive however it ran at SATA I speeds. Turns out the 3G which is specd for SATA II is what was needed and works fine.
    3. The OWC package they recommended includes a case to put your existing hard drive in. That helps to be able to transfer your data back to the SSD then you can use it as a backup drive or as an external storage device.

Maybe you are looking for