Solid state drive without trim using time machine

hi guys,
Due to hard drive failure I got a solid state drive. Samsung 850 pro. I read online about trim support and some have it on and some have it off. Once I installed my ssd i used a memory stick to boot with the Yosemite installer on it and i was up and running. I used time machine to transfer the information from my previous built in hard drive.
My question is - how do I know wether trim is on or off. My mac is working perfectly so I'm at a loss. is my computer safe?
Thanks in advance for your replies.
ps - I'm using a mid 2012 macbook pro.

Well, it depends what applications - if they are part of the system, it's best to simply use the latest copy included already. As for third party, you have to check if a) they are compatible (you did not say if you are upgrading to a new OS or not), and b) do they have any registration number/key that needs to be entered. If you downloaded them, it'd be better to download them fresh. The difference between drag 'n drop and a clone is that a clone copies your entire system including the little bits and pieces which may be in obscure places, so a drag 'n drop method will work with an app that was installed by simply dragging it into the Applications folder - but, if it employs an installer, you don't know where all the pieces are. So, you can try it, but be prepared for some unexpected behavior.
Make sure you put everything in the same spot it originated from...

Similar Messages

  • Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

    Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

    Hello, eco1. 
    Thank you for visiting Apple Support Communities. 
    This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location.  If this is the case then I would recommend taking a look at the article below. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Cheers,
    Jason H. 

  • How do I find my photos on my external hard drive backed up using Time Machine?

    How do I find my photos on my external hard drive backed up using Time Machine?
    My hard drive died so this is my only storage. The hard drive was from an early 2008 Macbook Pro.
    I had recently installed Snow Leopard.

    If they’re in an iPhoto library, look in the Pictures folder of your home folder first. Otherwise, they’ll be in the location corresponding to the one you saved them to.
    (111765)

  • How to store photo's on external drive and still use Time Machine and secondary back up plan

    So, My Macbook Pro is now going on 4 years old and I've accumulated around 15,000 photos in iPhoto now.  I would like to move everything (or at least everything older than 12 months) onto a portable external drive, but i'm not sure the best way to do this and still keep a good back up plan.  My current process is the following -- I have external HD same size as my current internal drive on the MBP, which is formatted that i use Time Machine.  I also have a paid subscription to Crash Plan online cloud back up that is connected to my laptop drive (CrashPlan is constant and easy, so I just USB plug in MBP to EHD a few times a month and that's it).  If I were to move most of my picture/video's/important docs to an external drive, how would I back that up with Time Machine, and if I did, how would I back up my laptop drive with Time Machine also, and what drive would I assign my Crash Plan online account too?  Cant seem to wrap my brain around the easiest and best method.  (In short, I want most pics/video's stored off the laptop so that my HD is not consumed; but still easy to access if needed, and easy to back up)  Also driving this need for a solution is the fact i would like my next lap top to be an Macbook Air, which I know I can't keep my current set up would not work.  Any thoughts are appreciated.

    if your internal drive has 250 GB and the external drive with the iPhoto library as well, your TimeMachine should have at least 1 TB.
    I have read over some of CrashPlans support docs and it sounds like it will be able to back up and restore the iPhoto library, and as long as you restore the entire library and not single photos, it will save and restore all metadata as well.
    I studied their documents to.  They are saying they can backup any filetype. And they are saying the iPhoto libraries or Aperture libraries will be backed up automatically, when they are in in the Pictures folder, because the Home folder will be backed up.
    On their screenshot you can see, that the libraries are backed up as a nested set of folders, and not as a package. That let's me doubt that the dependencies within the package will be treated correctly. To restore from the backup they recommend to restore the set of nested folders.  What I could not find anywhere in the documentation is any information on the filesystem they are storing the backup on. If it is not Apple's MacOS Extended (Journaled, not case sensitive) the restored library may be corrupted, because the internal links in the databases may not work. Try to find out something about the filesystem on the backup servers, before you entrust your iPhoto library to that servers.

  • New Hard Drive- Should I use Time Machine for "fresh" install?

    I have a first generation Early 2008 MacbookPro. Warranty just ended and I want to replace the hard drive w/ the Seagate Momentus XT Hybrid. I'm getting a bunch of spin wheel action and things are just running slowly/sluggish. I'm questioning whether or not I should just do a real "fresh" install and load my applications onto the new drive or use TimeMachine. If I use TM am I not adding all the stuff/files that are not needed? Am I adding bloat that I've collected over the past couple of years? Is it better to start w/ a new clean operating system? I do have CS5 and some photo programs that I think I can reinstall. Anyway I wanted to get people's perspective.
    Message was edited by: mikked

    It's usually best to clean your system up, and deal with any problems before doing major surgery.
    With any other scenario, if something goes wrong, how will you know what it was, much less how to fix it?
    I'd start with this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509].
    Then Verify your internal HD, and repair your Time Machine drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    Then run a +*Repair Permissions+* on your internal HD, via Disk Utility.
    Then replace the drive, do a full system restore and run for a while to be sure the new drive and everything else is ok. See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.
    Then start deleting the apps and files you don't need.
    Note that, unlike Windoze, leftover files and apps may take up a bit of space, but don't cause any performace problems, unless they're actually running.
    The main problems with trying to transfer things selectively are:
    Permissions. If you install OSX and set up a user account, that account, even if it has the same name, may not have permission to restore the files on your backups or other drives.
    Applications. Simple apps can be transferred individually, such as by restoring from Time Machine. Complex ones usually can't, as their installers put other files in other places. If you don't know what and where they all are, and restore them, too, the app won't work properly, if at all. But if you have all the original discs (and serial numbers/purchase keys), you can just reinstall them.

  • Restoring computer with new hard drive & Logic Board using Time Machine

    My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
    Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility, I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
    Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
    Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
    Thanks for any help!

    Arlee wrote:
    My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
    no. you can do a full system restore from TM using the restore utility on the snow leopard DVD.
    Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility,
    snow leopard disk utility?? what exactly are you doing? disk utility is not involved in restoring from TM in any way.
    I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
    Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
    no, this is not how you should do it. connect the AEBS by ethernet. then boot from the snow leopard dvd and use "restore system from backup" from the Utilities menu. it will let you find the backup on the network and do a full system restore from it.
    Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
    Thanks for any help!

  • Can I back-up files to a portable hard drive and not use Time Machine?

    I have a portable hard drive that I use for all of my Time Machine back-ups. I back-up the entire system every two or three weeks. I use the Time Machine software and it works quite well. I'm interested in backing up specific files (photos, documents, etc.) to a second portable drive every six months but I don't want to use the Time Machine software. Is there a simple way to hook up the portable drive (brand new Lacie 500 gb drive), open up the file on my desktop and drag the files to the new drive? Are there special steps I need to perform to avoid formatting the drive for Time Machine? Any tips will be greatly appreciated.

    MacConvert54 wrote:
    Is there a simple way to hook up the portable drive (brand new Lacie 500 gb drive), open up the file on my desktop and drag the files to the new drive?
    You can do that, but you'll have to erase the drive, or delete the previous versions, each time. You might want to look at CarbonCopyCloner or SuperDuper. They're most often used to make full bootable "clones" of your internal HD, but can be set to back up specific files and folders as well. CCC is donationware, so you can try it for a while before sending them some $$ so they can keep it up to date. SD has a free version, but I think you'll need the paid one (about $30, I think) to do this.
    Are there special steps I need to perform to avoid formatting the drive for Time Machine?
    It would be best to format it for Macs, which is the same as Time Machine. What is the problem with that?

  • Using Time Machine to restore to new hard drive missing recent backups

    On Mac Book Pro 2009 with OS X 10.5.8.
    I have been backing up to Time Machine on an external drive since 2009. A few month ago I upgrade to OS X 10.9 Mavericks.
    Trying to install a new hard drive and restoring from Time Machine. Just before installing the hard drive I again backed up to Time Machine.
    Trying to restore from Time Machine.
    Note: this link shows the screen I am on. It isn't from my computer. Just showing for display purpose.
    http://www.imore.com/sites/imore.com/files/styles/xlarge/public/field/image/2014 /03/time_machine_select_backup.jpg?itok=G2WbV0Vu
    "Select a backup. Select the Time Machine backup you want to restore. Only complete backups of Mac OS X appear in the list"
    The problem is, the most recent "complete" restore point in the list is August 2011 (OS X 10.5.8). How can that be? Over the years I have checked Time Machine and I have back ups way past 2011.
    What should I do?
    Thanks

    Daniel Greeney wrote:
    So I just purchased an internal drive (separate from my system drive) to use as a Time Machine drive, for both of my computers (only one partition). Since they will be backing up every day, I will retain much more recent material in case of drive failure.
    Let Time Machine back up every hour, as it's designed. That will protect you best.
    My question is this - if I have a drive failure on my current internal system drive, and the internal Time Machine is intact, is it possible for me to take my external bootable backup (say 3 weeks older than Time Machine in how recently it was backed up), make a cone of that on a new internal system drive, and then use Time Machine to restore that drive to what is most current on Time Machine?
    Does this question make sense?
    The question makes sense until you realize that Time Machine backups contain everything you need (unless you do something silly, like exclude your system files).
    Once the new drive is installed and formatted, you can restore your entire system from the TM backups faster than you can copy the clone to the new internal HD. See #14 in the Frequently Asked Questions *User Tip,* also at the top of this forum. Note that you use the Snow Leopard Install disc only for the Installer on it; you don't install OSX from it.

  • Using Time Machine to restore an *older* BackUp drive

    Here's my situation - I have currently been backing up my 2 computers (A Macbook Pro and a Mac Pro tower) to two separate external bootable drives (not Time Machines). I then take the drives off site in case of theft or fire, and know that if I need to I can always restore from these bootable backups.
    However, because of the time and effort of bringing them in from their offsite location, I only back up once every few weeks, sometimes a month or more. So I just purchased an internal drive (separate from my system drive) to use as a Time Machine drive, for both of my computers (only one partition). Since they will be backing up every day, I will retain much more recent material in case of drive failure.
    My question is this - if I have a drive failure on my current internal system drive, and the internal Time Machine is intact, is it possible for me to take my external bootable backup (say 3 weeks older than Time Machine in how recently it was backed up), make a cone of that on a new internal system drive, and then use Time Machine to restore that drive to what is most current on Time Machine?
    Does this question make sense? I'm essentially trying to use a combination of external bootable drives and Time Machine in order to have peace of mind, knowing that I will have a complete, bootable restore, but it will then be able to become as up to date as the last Time Machine backup.

    Daniel Greeney wrote:
    So I just purchased an internal drive (separate from my system drive) to use as a Time Machine drive, for both of my computers (only one partition). Since they will be backing up every day, I will retain much more recent material in case of drive failure.
    Let Time Machine back up every hour, as it's designed. That will protect you best.
    My question is this - if I have a drive failure on my current internal system drive, and the internal Time Machine is intact, is it possible for me to take my external bootable backup (say 3 weeks older than Time Machine in how recently it was backed up), make a cone of that on a new internal system drive, and then use Time Machine to restore that drive to what is most current on Time Machine?
    Does this question make sense?
    The question makes sense until you realize that Time Machine backups contain everything you need (unless you do something silly, like exclude your system files).
    Once the new drive is installed and formatted, you can restore your entire system from the TM backups faster than you can copy the clone to the new internal HD. See #14 in the Frequently Asked Questions *User Tip,* also at the top of this forum. Note that you use the Snow Leopard Install disc only for the Installer on it; you don't install OSX from it.

  • Solid State Drive For Macbook Pro mid 2012

    Hi Apple Users,
    I would really appreciate some advice, a link would be great too.
    I am using a mid 2012 macbook pro with 16gb ram. After trouble here and there, slowing down here and there to the point I'm about to crack - solution = Solid State Drive.
    I use a variation of 2D & 3D Programs to design with which include photoshop, maya, modo and Mari. My laptop just can't cut it most of the time and I need whatever I can so I can get jobs done without any lag, freezing or spinning ball while my laptop tries to catch up.
    I have browsed around for A solid State drive but what I found is confusing or at least I get somewhat lost in my search of plug and play. My built in hard Drive of 500gb has 350gb spare so going for a 250gb SSD seems the sensible option as I use my external HD to store my files, music etc.
    I don't want to open my macbook and fiddle too much so any suggestions which are near enough 'plug and play' would be great. I am aware I will have to take the casing from my macbook but I want an SSD that -
    - Fits straight into my macbook pro from out of the box
    - I can use my time machine backup to put onto my new SSD without trouble and Can continue getting my design work done.
    Budget wise I don't want to spend over £250 and that reminds me I would like to purchase from A uk website or retailer.
    Please Point me in the right direction of what SSD to buy.
    Really Appreciate your advice.
    Thanks

    Any SSD with a SATA formfactor of 2.5" diameter and a thickness of 9.5 mm will be compatible with your MBP.  Another possibility you might explore is OWC.
    http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
    You may also may find this informative:
    https://discussions.apple.com/docs/DOC-4741
    SSDs are indeed expensive, but is is not my place, nor anyone else's, to tell you how to spend your money.  To dismiss your query by expressing personal bias is a disservice to you and the purpose of these forums.
    I have installed in my MBP a Seagate SSHD (hybrid), 1 TB in capacity.  The cost is a very modest premium compared to a conventional HDD.  Boot and shutdown times are dramatically faster than before but it will not give the same performance as a SSD in processing resource intensive applications.  This is simply to give you an additional alternative to consider.
    Ciao.

  • How do I use Time Machine to downgrade from Snow back to Leopard?

    I have a MBA and optical drive, and I use Time Machine to backup.
    I'd like to revert back to pre-Snow, and pre 10.6.1. Where/how do I do this with time machine? Do I go to a previous date that had the old OS, and just select the System folder and then restore?

    If you want to go back to Leo, then you have two options at this point (ignoring what's above): erase and install (A&I) and archive and install (A&I). I am assuming that you know how to go back with an E&I, but probably don't want to do so now. Post back if you need help with this method. Note that you will need your original Leo install DVD to do either type of install.
    A&I is a good play, under your current circumstances, given that you are not ready, if ever, to do an E&I. Note that Apple doesn't recommend going backwards this far (i.e., going back beyond the current major version, say, 10.6.2.x back to 10.6.1.x) via A&I. But, regardless it is a way to get back to Leo and to pave the way for an restoring with your TM or doing an E&I of Leo in the future assuming your E&I fails to produce an acceptable installation.
    Note that if you go backwards, then you will not be able to preserve user and network settings--which may be a good thing. Fortunately, there is a way to extract anything needed from a prior user home folder. [Here is the explanation|http://support.apple.com/kb/HT2196].
    Even though you don't want Sno any more, it would be nice to have a bootable clone of your Sno installation on an external for safety purposes--as mentioned above. On the other hand, your TM backup takes much of the need to have a clone away. Also, I would repair disk and permissions before archiving and installing and unplug all peripherals during installation, but not your Ethernet connection if you have one.

  • Where and what type of solid state drive should I buy for my early 2008 Mac Pro Desktop??

    where can I buy and what type of solid state drive should I use to upgrade my early 2008 Mac Pro Desktop??

    Rick,
    When you get a chance.... DSLReports is off line: their SQL server decided to take its indexes and access to data. Power. Not enough of the right kind of UPS. Same happened to StorageReview's "Drive Reliability Database" about 8-9 yrs ago.
    dslreports.com is offline
    Fri Apr 20 09:05:55 EDT 2012
    SSD: Loading CS5 plus other little monsters might matter.
    Lots of small I/Os
    latency of 1/100th where nanoseconds replace those "long" milliseconds
    System: Small and fast.
    DLLoyd even goes for short-stroking drives to get and maintain highest I/O
    The new 10k VRs hit 200MB/sec - I still use them and still find them useful, long lasting, feel responsive with whatever I ask of them. I know they get criticized and "cost too much"
    Just bought a new WD Black and yes it is better than the 2008 model I was using.
    600GB 10K $200 vs $150-220 for WD Black. your choice
    I can destroy a 7.2k drive, I have brought ever 10K drive back after a simple WD Extended Test in Lifeguard.
    I don't really care about $$/GB or I wouldn't have just bought Intel 128GB $149
    Database: the pros put the index in memory and page fix (virtual volumes in memory; cache; hold disk drive index in memory). Caching storage has been around for almost 40 yrs.
    Today you can use SSDs as front end cache to hold DB indexes and frequent data for web servers and such adn use slower secondary storage.
    SSD + SAS + 4TB storage
    Separating the system from data: #1 must
    Having data on array: been what I use
    I put a large photo library on 2 x 10K VRs vs SSD and couldn't tell much difference (SSD is soundless of course) But my WD Blacks make as much noise and run 15*C hotter than those 10K (not what you expect?)
    While 10K and 7.2K are in the 140-180MB/sec range, they are in 3.0 to 12.0 ms seeks, not  0.01 ms.
    People wonnder why shrink a drive to 2.5" (or why not go down to 1.8".
    How long does it take to reposition a disk head? how often? the 10K VR travels on outer tracks at 70 MPH. Really trying to fly off into space.
    It uses one step to find the "zip code" and then another DSP to find the "house."
    True of any high density perpendicular recording mechanism.
    And of course while the Raptor-X tried to find a home with famers, Cheetah buyers, the WD 10K line has more of a home where servers and small form factor drives - and 100s of them - can fit in a rackmount server I imagine.
    Anyway.... if SR and DSLReports can drop out of site due to power and hardware failure and loss... we can learn some and hope to protect our own data and investments.

  • Can I use Time Machine to sync my Imac with my Macbook Pro?

    Is it possible to maintain my hard drives in sync using Time Machine?

    No. TM is machine specific and is not ideal for syncing machines. You need syncing software or MobileMe. MobileMe has a 2 month free trial. Oh, cloning software of specific files may work as well depending on what you are syncing.
    [www.apple.com/mobileme>

  • Can I migrate my data from a regular hard drive to a solid state drive using only a Time Machine backup from an external hard drive?

    I just bought a Samsung 830 256GB solid state drive which I will use to replace my 15-inch, 2.53 GHz, Mid 2009 MacBook Pro's stock hard drive. I also keep an external hard drive in which I keep my regular Time Machine backups via FireWire. Would I be able to migrate all my data from it after putting in the solid state drive? I prefer not to use any third-party applications and I do not plan on replacing the SuperDrive with the hard drive that I'm going to remove from my laptop.

    chinodelarosa wrote:
    Would I be able to migrate all my data from it after putting in the solid state drive?
    Yes.

  • I'm looking to but the iMac 27"  with 2TB Serial ATA Drive   256GB Solid State Drive .  Will time machine automatically back up both the hard drive and the solid-state drive?  Ae there any catches or things to be aware of?

    Will time machine on Lion, Mac OS 10.7, automatically back up both the internal hard drive and the internal solid-state drive both inside a 27" iMac?

    Also, you may find this of interest
    TM 101
    http://support.apple.com/kb/HT1427

Maybe you are looking for