SolidState hard drive... how can I use cd's and dvd's

Please help me. This new mac book pro has not DVD_CD player. Is there a way to pug one in?

you can purchase a external Superdrive from Apple or go to best buy and get an external usb cd/dvd drive...

Similar Messages

I did backup from my Imac to external hard drive, how can I unzip that backup to my mac

I did backup from my Imac to external hard drive, how can I unzip that backup to my mac again

It may be Time Machine, but Time Machine doesn't store backups in .zip folders. Open Finder and select your backup external disk in the Finder sidebar, under "Devices". If you are using Time Machine, you should see a folder called "Backups.backupdb".
If you are using Time Machine and you want to restore a full Time Machine backup, there are different methods depending on the Mac OS X version you are using. Open  > About this Mac, see Version and tell me what version you are using

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
Mylenium

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can i use this sript and loade another movie?

Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]

Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal.

How can I use the battery and let it be perfectly healthy?

Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
Andrea

Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220

I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

iPhone - Locating wireless carriers
The above will provide carriers in Singapore that you can use. You would get the SIM card from the carrier. Of course if you are somewhere that has WiFi service then you won't need the cellular connection.

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How can I use wget, cron and Automator to periodically pull a dynamic image from a URL to local storage, and then update a Keynote slide with that image, automatically?

How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?

Any particular reason for those specific technologies? wget does not exist on a mac, although you can nstall it I guess. OS X has curl installed which should do pretty much anything you want to do with wget. cron is being replaced by launchd, although cron still exists on mountain lion.
As far as I can tell from automator all the standard 'actions' to access keynote available to it require keynote to be open and running, but does not provide a function to actually open it. So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
Also, note that cron is being dprecated by Apple and replaced by launchd. that said cron is stil on my mountain lion instalation.
This entry at stackoverflow shows use of cron with curl to get web urls. http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
If I have any time I may try and get this to work as it is quite interesting and new to me. But otherwise, good luck.

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

How can I use a remote CD/DVD drive to install MacOS 10.4?

Hello,
My old iBook G3 needs to be updated to MacOS 10.4 however its CD drive doesn't work. I have an retail copy of Tiger and have put it in my iBook G4 but when I open the installer it doesn't allow me to choose my mounted iBook G3 (which I have connected through a wireless network). How can I use my iBook G4's CD/DVD drive to install MacOS 10.4 on my iBook G3?
Any help would be appreciated.
iBook G4 Mac OS X (10.4.6)

'Making matters worse' seems a bit excessive, since it isn't that uncommon for an optical drive to die in an otherwise perfectly good machine. (Ask parents with inquisitive kids, for example!
Plus, this is an iBook, & I don't believe OWC sells replacement internal drives for them, only for PowerBooks, so it doesn't seem that unreasonable to suggest that he first try something that has a good chance of doing what he wants to do, which is install Tiger on the iBook, rather than suggest anything that may or may not be appropriate for his situation.
Since he already has purchased the DVD, the most he is risking with the TDM approach is the cost of a 6 pin to 6 pin FW cable, which he still should find useful no matter what else he decides to do. If nothing else, it shouldn't cost anymore than the exchange of the DVD for CD's, right?

HT5085 I have purchases (music )that is on ipad and plays but is not in ibary on pc as I changed hard drives - how can i get them back to libary to play on pc and sync ipad without losing them ?

I have purchased music that is on ipad and plays but is not in libary on pc as i cleared hard drive to portable backup ?how can i get back ? and sync ipad without losing it al ?

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

SolidState hard drive... how can I use cd's and dvd's

Similar Messages

Maybe you are looking for