Solitaire City on 2nd Gen. iTouch

I've got Solitaire City on my 2nd gen iTouch. Here's my question for the group. When playing a game and you move a card from the field to the "home row", a bell sounds. On my iTouch I hear a crackle when the bell sounds. I'm just wondering if anyone else hears the same thing, or do i have a screwed speaker.
I hope to hear from others.
Thanks

- Purchase and install version 3.0 of the iPhone/Touch software from the iTunes Store.
- Go into Settings>General and set Bluetooth to On.
Note: The only Bluetooth devices that the Touch will currently sync with are stereo speakers and headphones (NOT headset/mic combos such as you would use with a cell phone).

Similar Messages

HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
help

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Could it be this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

2nd Gen itouch syncing

2nd Gen itouch: I am using Outlook Express on my PC & wish to continue doing so.
Succesfully synced music, photos & bookmarks but will not sync address book. I have tried using Outlook, this does not work and have followed all insructions in manual. Can anyone help?

Can anyone help?
Not here I'm afraid. This is the *Mac OS X Technologies > iSync* forum, which has nothing to do with syncing iPod touch (not iTouch) to Windows PCs.
Try here: Connecting iPod touch to Windows

How do I update my 2nd gen iTouch in order to get angry birds???

How do I update my 2nd gen iTouch in order to get angry birds???

This is the way you upgrade.
What is the problem?
What happens when you do this?
Do you you click Check for Updates on the summary page in the main itunes window?
What exactly have you tried?
What exactly happened?

The battery of my 2nd gen itouch drained. when i tried to charge it, it's already in recovery mode. how can i get it out of recovery mode without restoring?

my 2nd gen itouch went to recovery mode after the battery drained. how do i get it out of recovery mode without restoring it? btw, my itouch is not jailbroken and it's on ios4 (don't know which version). thanks!

you can find softwares like recboot that will remove the recovery mode. you can search it on google
http://www.google.com.np/search?q=download+recboot&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-US:official&client=firefox-a

Can i put iOS5 update on my 2nd gen. itouch?

i have a 16 gig, 2nd gen itouch. can i get the iOS5 software update on it? if so how. and if not, will they make it available anytime soon?

Probably not, if memory serves, iOS5 is only available for iPod touch 3rd generations on up.

The backlight on my 2nd gen itouch has quit...

The backlight on my 2nd gen itouch has quit... I restored the restored the software, but it didn't help - I'm sure its a hardware problem. Does anyone know what the fix for this might cost? Thanks
I couldn't see any other similar questions until this posted just a second ago - in case in helps with the diagnosis, the backlight does come on intermittently, which made me think it was a software problem, but now I'm just not sure.

I would make an appontment at the Genius Bar of an Applew store. It is free except for your time. Apple will exchange your iPod for a refurbished 2G for:
Apple - Support - iPod - Repair pricing
A third-party place may be less expensive: Here us one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
However, it may not be worth it for a 2G iPod.

Activating bluetooth on 2nd Gen itouch

hello
i just got the 2nd gen itouch and was wondering if anyone can provide me with step by step instructions on activating the bluetooth.
Thanks so much.

- Purchase and install version 3.0 of the iPhone/Touch software from the iTunes Store.
- Go into Settings>General and set Bluetooth to On.
Note: The only Bluetooth devices that the Touch will currently sync with are stereo speakers and headphones (NOT headset/mic combos such as you would use with a cell phone).

TS3595 I updated my itunes and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

I updated my itunes (latest verion out as of nov/20/2012) and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

I have a 2nd gen itouch and i tried to restore it...but i took the cord out on accident while restoring...so everytime it turns on it stops at the apple screen with the little loading thing that looks like a flower. it wont even connect to my laptop.help?

ok, so my itouch 2nd gen starts up only to the apple logo but stops there with the loading thing that looks like a flower. it doesnt connect to my laptop either. it got unplugged while trying to restore it on my laptop and now its not rly working. any help? i alredy tried holding both buttons down like more than 100 times and it still doesnt work. so any solutions?

Try placing the iPod in recovery mode and then try restoring the iPOd via iTunes. For recovery mode see:
http://support.apple.com/kb/HT1212

2nd gen iTouch mic support?

I have a 2nd gen iPod touch (8 gig). I purchased a set of apple earphones with remote and mic. Although the manual for the earphones/mic/remote clearly states that they work with 2nd gen iPod touch I can only get the earphones to work. The iPod won't register that a mic is connected and the remote does not work to advance songs or adjust volume.
Is there something I'm missing here? The earphones have 3 bands on the jack and the jack is fully inserted into the iPod. I tested them using the "Voice memos" and "iTunes" programs as those are native and I would hope wouldn't involve glitches.
I also updated iTouch to OS. That didn't seem to help. Is there some sort of setting I'm missing or did Apple goof on the compatibility statements?

Can anyone help?
Not here I'm afraid. This is the *Mac OS X Technologies > iSync* forum, which has nothing to do with syncing iPod touch (not iTouch) to Windows PCs.
Try here: Connecting iPod touch to Windows

Cannot update 2nd gen iTouch to 4.2 because iTunes 10.2.1 won't update

Hello,
I have two problems. One, I need to update my iPod Touch 2nd gen to 4.2 (I am currently running 3.1.3). However, when trying to update I am prompted to update to iTunes 10.2.1 first(I believe that's the one). But the iTunes update won't complete. I get an error message telling me that it wouldn't update and to try it manually. I've tried that to no avail. This has happened several times over the last few months. I keep trying to update iTunes but I always get that error message.
So needless to say, my second problem is that I cannot update my iPod to 4.2.
Is there a away around this? Thanks.

I would completely uninstall Itunes and other associated Apple software and then reinstall the latest versions. The following provides the necessary instructions:
http://support.apple.com/kb/HT1923

On my 2nd gen itouch i accidently hit vpn and now i cant go back to wifi

I can not get back to wifi on my 2nd gen ipod because I went into vpn and now it won't let me do wifi.

To recover from a lost Restrictions passcode:
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to it see:
How to reset forgotten Restrictions...: Apple Support Communities
How to reset forgotten Restrictions...: Apple Support Communities

2nd Gen Itouch Update Software Issue - Help Required.

I've a second gen Itouch that I'm trying to update its software from 3.1.3 to 4.0 as my itouch keeps telling me to. However I plug it into itunes and press "Check for software update" and it says that 3.1.3 is the current version. Anyone help? I'd really appreciate if someone could come to my rescue as I just bought it second hand today after ages of saving and I'm so bummed that it wont let me download anything. So if anyone can help please do!

You have a 1st generation iPod touch then, not a second one. 1st gen iPod can only update to 3.1.3.
To confirm, go to Settings > General > About > Serial Number.
Then enter the serial number on this page: http://support.apple.com/specs/

2nd Gen iTouch Screen/Headphone port problems.

Ok, so my sister has a 2nd gen iPod Touch that was immediately put into an Otterbox case to protect it. It's been a few months and now when she plugs in headphones, the screen flickers on and off if the headphone plug is moved around. I don't know what the heck is the problem and that darn Otterbox protects that thing. Any ideas? Thanks.
Message was edited by: Warheart1188

You have a hardware issue there that would need to be serviced to fix. The socket may need to be replaced. If you are out of warranty, I would suggest a third-party repair shop. It will be cheaper than Apple.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Solitaire City on 2nd Gen. iTouch

Similar Messages

Maybe you are looking for