Sollution to Firefox 3.6.8 issues with Flash 10.1.53.64 !!

Sollution to Firefox 3.6.8 issues with Flash 10.1.53.64 !!
Had the well known problem after upgrading to 3.6.8.
Found that many people had the same problem also.
After investigating A LOT about this one i've found that if you set, in about:config, the parameter " dom.ipc.plugins.enabled.npswf32.dll " to FALSE it solves the problem !!
So...
dom.ipc.plugins.enabled.npswf32.dll == false

While I have not contacted Adobe, I am sure the answer will be don't use Firefox 3.6.8. ( The compliment to the answer you gave. It not Firefox that has the problem but Adobe.)
Since the only solution that I have seen is to disable the key reason to use Firefox 3.6.8 (crash protection) then the problem would appear to be in how Firefox as done the crash protection.

Similar Messages

  • Safari and Firefox seem to have issues with Flash?

    Hi - in the past few days every time I try to view a website with video, both Safari and Firefox hang with the beachball and I have to force-quit. I tested to see if it was just taking a long time to load, and it was still the same after an hour. I've read on this forum that Snow Leopard and Flash have some issues, and I've done everything suggested: un-installed Flash then re-installed the latest version, cleared out Safari cache and reset Safari, repaired disk permissions...I am at a loss. Any ideas are appreciated!

    Hi,
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem.
    http://support.apple.com/kb/TS1594
    Make sure Safari is running in 32-bit mode. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
    If Safari still crashes, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
    Carolyn

  • Firefox hangs on all sites with flash content.

    Firefox hangs on all sites with flash content. If I disable the flash plugin there is no hanging but obviously no flash content either. I have tried all the suggested actions found in the help sections for hanging and plugin problems. The Honda UK site listed below is one of many I am unable to access with flash enabled.
    == URL of affected sites ==
    http://www.honda.co.uk/

    Chris Campbell wrote:
    The key here will be to determine what is different between the machines that work and those that hang.  Of all the systems that fail, they are all Windows 7 32bit?
    Yep, this issue only happens on Windows 7 32-bit machines, currently 6.
    Do you have any 32bit systems that don't fail?
    Yep, the most Windows 7 32-bit machines wont fail.
    What about hardware, are there similarities here?  Attached devices/drivers?  Software that is running at the time?
    These machines are all from DELL. They all have normal hardware, nothing special. Other machines from same type does not affected. Software: All have standard software distributed via Software-distribution (GPO). Only some PCs have special software, but it is not running. No special drives, too.
    Maybe try booting Windows in safe mode to see if it still hangs?
    Good idea, indeed - I will try this.
    We're definitely interested in what's going on.  I'll ask our security and Mozilla folks to see if they have additional clues.
    Thanks!
    EDIT:
    Safe mode: Flash is working! (without disabled Protected Mode!)
    I've set msconfig now to: Custom system start and deselected the boxes to load systemservices and system start elements.
    So, now windows does a non-safe mode boot but no service or element was loaded except the drivers (right?). Flash is not working with this config!
    So, whats the difference between safe mode and normal boot with minimal configuration (see attached picture).
    Only drivers will be loaded, right? If so, I can exclude the network and graphics driver as source: graphics driver are updated right now and network was working in safe-mode.
    Any new ideas?
    Informations about safe-mode

  • Issues with Flash Pro CS5 on Mac

    Hi,
    I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
    Hi have some issues with Flash Pro:
    - when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
    Correct:
    Wrong:
    After entering editing mode:
    - after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
    - after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel.  This happens more when opening many fla in the same time.  Closing and restarting Flash fixes it, for a while.
    Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
    Removing preferences and Application support files didn't help. I also updated Flash  to v. 11.0.1, but no joy.
    Does anyone know what's the problem?
    Thanks a lot.
    Mike

    Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
    I hope this helps anyone else who may run into this problem.
    Take care,
    Branden

  • Having Major Issues with Flash Player

    Using IE 8,  64 bit, flash player 11.4.402.287
    Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open.  This issue has been going on for weeks now.  I have done everything the help said to do and still not working.  I need HELP!

    im using the recent adobe flash player
    windows XP, internet explorer, 10.045.2, 32bit
    im not sure how this works, but im sure all that is correct:)
    if you need additional infomation, just let me know

  • After the recent update I am having issues with Flash based games freezing and not responding.

    After the recent update I am having issues with flash based programs not running or loading correctly.  The programs will not load or take an extremely long time to load compared to jsut a few days ago.  This happens across the board on anything flash based.  Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best.  I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers.  None of this has helped at all.  I am using Chrome and it is up to date and I checked my Flash player and it is up to date.  I am running windows 7 64bit.

    Here's what you're up against guys,
    Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
    And to the first post:  Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

  • Issues with Flash player in CC

    Hi,
    I am facing this issue with Flash in CC. We have recently upgraded our Adobe suite from CS6 Master Collection to Adobe Creative Cloud ENT.
    The video playback in the software(Flash in CC) is incredibly slow and choppy, which makes it difficult for students to work on their animation.
    This is happening with all PCs using Flash CC, there are few students who have Flash CS6 on their PCs and they aren’t having this problem.
    Thanks,
    Ram

    Hi Mohan,
    Thanx for the response. below are my specs:
    Specs:
    Windows 7 Pro, Service pack 1, build 7601
    Intel Core i5 760 2.8Ghz
    5 GB RAM
    Nivdia Gefore GT 220
    Just tried your recommendations.
    The performance issue exists for both the stage/timeline playback as well as test movie. I tried the suggestion to close the timeline and it doesn’t seem to make any difference.
    When playing back footage, the FPS display on the timeline can be seen to fluctuate.
    I’ve also tried another thing: Closing Flash CC and opening the test movie SWF file, which opens in Flash Player 11 and it plays perfectly fine.
    Tanx.. Ram

  • Interface freeze issue with Flash Projector

    I am facing an interface freeze issue with Flash Projector running a flex state based application. A Flash Projector exe was generated from a standalone flash player ver 10.2. The target machine on which the problem occuresd has 10.3.
    Basically "screen freeze" means that the user interface is running as usual on Flash Player, but it's not responding to any user input (like button presses). But if we alt-tab to another application, the state changes in the Flash player. There is display with buttons on the screen, but touching the buttons or doing anything else - it did not respond.  Rebooting the computer fixes the problem.
    Can you suggest why this is happening? Is there any known bug in Flash Player.
    The problem is this is being hard to reproduce on the developer workstation as it doesn't happen always. But it happens quite often on the target machine running an Intel Atom N270. What debugging steps can you suggest?
    Problem Description : http://www.youtube.com/watch?v=z25oV9QWRyk

    First, thanks for the video.  Having this always makes it much easier to understand the problem.  A couple of recommendations.  First, if you feel like this might be a player bug, please add a new bug report over at bugbase.adobe.com and if possible please include any sample code or swf's that can help us reproduce the problem internally.  Linking the video would also be great.  In addition, would you mind reposting this question over on the Flash Professional forums?  This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience who might have additional feedback.
    Thanks,
    Chris

  • Firefox constantly freezing due to issues with Flash. Please help.

    I was running the firefox 20 beta (and have been for a while) when in the last few days, suddenly any time I tried to open any site that used even the slightest amount of flash, the browser would freeze for minutes on end before finally releasing a "plugin error" type message about Shockwave Flash. If i clicked 'continue' it would stay frozen. If i clicked 'stop script' then sometimes it would fix it, but most of the time it would keep freezing and showing that same message over and over until I stopped the process in task manager.
    First I tried to update flash and shockwave- both are up to date. So i decided to delete the files themselves and the programs via add/remove and reinstalled them. Still did not fix the problem.
    Next I tried to do a reset firefox to default state. This didn't work. I tried doing it again with the flash files deleted/uninstalled AND I rebooted the computer and the problem still persisted.
    Finally, I tried to downgrade to a more stable version of firefox, so I downloaded 19 and it still didnt work. Tried the uninstall/re install for flash one more time and nothing.
    At this point, I cannot access about half of the pages I usually go to on the web and I need help here, please anything will do.
    One thing that I noticed that might be helpful is that no matter how many times i uninstalled or reinstalled flash, every time it would try to run, task manager would show two instances of it, each using different amount of memory.
    again, please please help. If there is any solution short of a total wipe it would be greatly appreciated

    hello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.

  • Issues with Flash - Firefox 7.0.1 on Windows 7 & Firefox 3.6.23 on Mac OS 10.4

    I'm having an issue with Firefox vs Flash, and having scoured the web haven't found an answer, so any help appreciated.
    I work on a Flash website which uses URLLoader to load XML - previously working perfectly until Firefox and Flash updated to versions:
    FF 7.0.1 & Flash 11,0,1,152 (Windows 7 v6.1)
    FF 3.6.23 & Flash 10,3,183,10 (Mac OS 10.4.11)
    Data load produces IOError, but not in Safari, IE, Chrome, Opera. Where to start!? Is this a Firefox or Flash issue?

    *BUMP* Does anyone have any ideas? Or has anyone managed to fix this problem for themselves?

  • I am having a very fustrating issue with flash

    I am running flash in IE8 on a win 7 laptop with flash version 10.1 plugin.  i can install it and it will run for a while. but once i restart my system or close my browser and start it up again.. it starts to crash. then the problem will migrate to my other browsers.( firefox and chrome) this has started happening since i upgraded to 10.1 from 9. whatever.  and i cannot just re-install it to get it working again.. i have to shutdown all browsers. uninstall flash through the control panel reboot , then install , reboot then it MAY work. any help would be very appricated. the biggest culprit is facebooks flash app cityville. It is the one that is really causing this issue.

    Hello BaoBae,  Since no one knows what problem you had, since you didn't start a thread, it's difficult to offer your solution to others. Especially when you don't know what their problem is:-) There is no one fix.
    Why go thru everything you have posted here, when the problem may be a simple turning off the hardware acceleration feature? This is just one example. Or how about  an addon in the browser and disabling it and that is the solution?
    Offering a solution before knowing the problem is having the cart before the horse and really isn't helpful.
    You most likely know what your problem was, but no one else does that you are giving your solution to on the threads here.
    If this solution solved whatever issue you were having, that's great. But it won't be for everyone, nor should it be.
    Finding out the problem and then the solution is always the order:-)
    Thanks,
    eidnolb

  • Issues with flash and other adobe products.

    Ok, so i've been using flash player for quite a number of years now aswell as other products like acrobat reader when i used windows, over the years flash player has developed into a totally inneffecient and almost unusable product. on top of the security issues of past with flash player and especially acrobat reader, with remote code execution vulnerabilities, i have, as have thousands of others noticed a very large decrease in performance with flash.
    i should note that a year or two ago, i could play HD flash content no problem, both 720 and 1080 resolutions, full screen without any issue. i would expect it to take up a decent portion of cpu cycles, which it did, i use to be able to run flash content at 720 with about 30 - 50% cpu usage. now it seems with flash 10 my AMD Athlon 4000+ struggles to play even 720 videos. My cpu is by no means a top performer, it is however capable of handling somewhere in the region of a billion instructions per second. for video content to require that amount of data to be handled is rediculous.
    HD content played back on my local machine using a different codec, my cpu barely even uses 5 - 10% cpu time, not only that, these videos have roughly about the same compression rates as flash videos. i just don't understand how flash can require so much resources without taking into account innefficient and bloated code.
    today i tried to access a web page that required flash content to display images, it was not a video, but an image database, going from one page to the next took somewhere in the region of 20 - 30 seconds, while my cpu maxed out at 100% and firefox stopped responding, which is totally unnacceptable.
    it wouldn't normally be a problem if there were good alternatives, but there aren't any, im stuck with this piece of crap software if i want to view any flash content. the only real alternative is to upgrade, which i am not prepared to do if the next version of flash is just going to push those boundries even further for features i don't need.
    my proposal is to:
    1. rewrite the code with effeciency rather than new features in mind, if that means getting able programmers in, then so be it.
    2. make flash modulous, where the basic package provides capabilties to play flash content and separate plugins to provide for all the individual unnecessary features that are not required for basic flash content. surely you can build a package that provides all those plugins for regular users and a basic package + optional plugins for those who know what they want or need.
    it really makes no sense why such a large corporation with all this experience to provide a product that quite simply.. sucks, well it does actually, either your programmers are incapable of creating a stable, efficient product or you are purposly trying to push hardware upgrades onto people. lets not forget that flash content is huge business on the web, adobe flash player has a strangle hold on that market, it would be naive to think that hardware vendors have not approached adobe with specifications to further make the money wheel go round.
    sort it out, because i for one, am in the process of completely removing my dependancy on adobe flash, if the right product comes along, others will do to, in droves. it's a bubble that is going to burst and there is no way back when you have millions of lines of quite frankly, amateurish code.

    Eric,
    The GTX 650 would be priced slightly higher than the GT 640 - and then, the OP would have to "settle" for only 1GB of graphics RAM instead of 2GB. The GTX 650 is currently not available with 2GB of RAM.
    Both the GT 640 and the GTX 650 are based on the same GPU - the GK107, with 384 CUDA cores. The two major differences are that the GK107 on the GTX 650 is clocked higher than the one on the GT 640, and that the GTX 650 has almost triple the memory bandwidth of the GT 640 (80 GB/s versus 28.8 GB/s).

  • Win 8.1 stutter issue with Flash 15.0.0.189

    Greetings -
    I am having stuttering issues with 2 brand new 8.1 computers running flash.
    I've done a fair amount of troubleshooting and I believe it's an issue with Win 8.1 and Flash 15.0.0.189 (I don't know about previous versions.
    Running this version of flash on my Win 8.0, HP works fine in both IE and Firefox
    Running this version of flash on a new (few weeks old) custom built Toshiba Satellite S with Win 7 preloaded works fine in both IE and Firefox
    But then I bought a Best Buy "blue label" Toshiba E45 with windows 8.1 I have stutter with both IE and Firefox.
    No updated video drivers, but I reinstalled anyways. Also uninstalled/reinstalled flash as well as Firefox. I also unchecked " hardware acceleration" no difference. Changed screen resolution on my desktop, still had problems
    Returned it and bought a Lenovo U430 with Windows 8.1 today...still have stuttering on FireFox and IE
    Apps that run Silverlight work just fine.
    It seems to me that there is an issue with Win 8.1 with the most recent version of Flash.
    If an adobe staff member would like me to test the HP or Lenovo U430 further to resolve the issue, please let me know. I really can't handle all this stuttering.  I would really love to help get this resolved asap.
    If staff would like an example, Gracepoint on Hulu. The most recent episode The first stutter came in when 24:56 min were left at the show and then 22:55 min left. I then switched over to IE and had stutter with 21:20 left in the show, 17:56 left, and then 17:02 left.  But it really is random.

    Hey, same problem here. System: ASUS N56JK, nVidia GeForce GTX850M with latest dirver (344.60), Win 8.1, Flash Player version: WIN 15.0.0.189. Browser Opera 25, IE 11.
    Video (full screen and window) stutters time to time. Audio is fine. HTML5 works also fine. Tried all possible variants (disabling HW accel., drivers update, browser update etc.) - nothing helps.
    Dear Adobe experts, you'd better look on to this issue asap, as it's massive. Can't open a bug report, so write it out here. Can send 'DxDiag.txt' file by request if needed.
    Meanwhile will look for Adobe FP alternaitives on Win OS..

  • [FP 11.4 & FF 14.0.1] Firefox hang on every page with flash-content

    Hi at all
    I have a problem with the new Flash Player, let me explain it:
    We have a windows-domain with software distribution via GPO.
    Since update to 11.4 via the msi package (11.3 was previously installed) we have in the meanwhile 3 PCs (all Win7 x32 with FF 14.0.1 and Flash 11.4) with this problem:
    - While loading a page with Flash content, the Firefox simply freezes and have to be killed together with plugin-container in order to work again.
    If this happens, ff and plugin-container have 0% cpu-usage. It freezes and does nothing...
    If I remove Flash: Web-pages are working, but without flash.
    What I've tried:
    reinstall using flash-uninstaller
    Using "normal" end-user web-installer
    Uninstall via Uninstaller and tried 11.3 again
    reinstall Firefox, both 14 and 13
    Nothing helped to bring Flash-support back.
    This happens only on FF, Internet Explorer is working fine...
    Can someone give me a hint?

    Chris Campbell wrote:
    The key here will be to determine what is different between the machines that work and those that hang.  Of all the systems that fail, they are all Windows 7 32bit?
    Yep, this issue only happens on Windows 7 32-bit machines, currently 6.
    Do you have any 32bit systems that don't fail?
    Yep, the most Windows 7 32-bit machines wont fail.
    What about hardware, are there similarities here?  Attached devices/drivers?  Software that is running at the time?
    These machines are all from DELL. They all have normal hardware, nothing special. Other machines from same type does not affected. Software: All have standard software distributed via Software-distribution (GPO). Only some PCs have special software, but it is not running. No special drives, too.
    Maybe try booting Windows in safe mode to see if it still hangs?
    Good idea, indeed - I will try this.
    We're definitely interested in what's going on.  I'll ask our security and Mozilla folks to see if they have additional clues.
    Thanks!
    EDIT:
    Safe mode: Flash is working! (without disabled Protected Mode!)
    I've set msconfig now to: Custom system start and deselected the boxes to load systemservices and system start elements.
    So, now windows does a non-safe mode boot but no service or element was loaded except the drivers (right?). Flash is not working with this config!
    So, whats the difference between safe mode and normal boot with minimal configuration (see attached picture).
    Only drivers will be loaded, right? If so, I can exclude the network and graphics driver as source: graphics driver are updated right now and network was working in safe-mode.
    Any new ideas?
    Informations about safe-mode

  • Help please? Static audio, Crashes, ActionScript Errors and more issues with Flash Player 16

    So, this is the first time I'm posting in here and I'm sorry if I mess up or smth.
    Anyway, this is what happened:
    - Firefox tells me Flash Player 15 is vulnerable
    - I update to the newest version
    - After the update I run into several things that are highly annoying.
    First of all:
    - I can't watch any livestreams anymore, neither on picarto nor on twitch. The video keeps loading and buffering, then works for a second or two and then goes back to buffering OR alternatively the video would stop whilst the sound continues or vice versa. (My wifi connection is super fast and I never had any problems until the update)
    - On youtube videos only load for a second or two, then the audio vanishes and the video crashes. (Never had that issue before, EVER)
    - The audio is incredibly wonky, aka, depending on the bass or sounds I hear static noises and weird sounds. (This only happens on videos that require flash, the sound is fine when playing CDs )
    - When watching videos and pausing it or going back a few seconds to rewatch something, the audio suddenly is completely gone.
    - Flash player crashes A LOT
    EDIT: Another Issue appeared:
    - When watchign videos using the Blip player (used by some websites) I get ActionScript errors which then result in crashes
    I'm using:
    Packard Bell EasyNoteLS
    Windows 7 Home Premium
    Firefox 34.0.5
    Adobe/Shockwave Flash 16.0.0.235
    What I've tried to do:
    - revert back to an older version of Flash (but it kept telling me to update so I gave up on it)
    - Try to enable "hardware accelaration" BUT, when right clicking on the Flash Symbol on Adobe's site FF freezes and tells me that Flash player crashed
    - Found out that I already have hardware accelaration enabled and it still keeps crashing
    - I deleted all of its local cache
    - downloaded and installed the debug version
    But none of it helped in the slightest.
    I really hope someone can help me fix this OR that adobe soon comes with a patch/update that fixes all these things ;_____;
    Thanks for reading and helping!

    Just to let you know, I don't tend to send all reports but here are a few from within the last week:
    [@ hang | WaitForMultipleObjectsEx | RealMsgWaitForMultipleObjectsEx | CCliModalLoop::BlockFn(void**, unsigned long, uns…
    https://crash-stats.mozilla.com/report/index/8f9d816a-8fa9-475a-9b6c-b660a2150109
    https://crash-stats.mozilla.com/report/index/a415ab2a-1321-4056-b263-83c212150109
    I tend to submit crash reports most of the times lately but yeah--
    Also, someting that really bugs me are these Actionscript errors because I can't upload a crash report for those--
    (they are more rare now but still happen occasionally)
    EDIT: Added photo of one of the Actionscript Errors when trying to play videos using the blip-player

Maybe you are looking for

  • Exception Handling Concept Gone Bad!!

    Okay, this is by far the most embarrassing hack of code I've done thus far . . . but it works. I am trying to run a select where if there is no data or null returned, place it into the value "v_pidm', and then let the action occur. Simple enough, rig

  • XSL-FO square bullet HEX Code

    I am working on XSL-FO and HEX code "▪" for small black square is not working correctly. It is being replaced by "#" in my PDF output. Is there a place in the ckeditor files where we need to add this HEX code to work? Or if someone knows other HEX co

  • Prices on invoices not mantained - Discounts - Special Prices

    Hello everybody, I'm developing with SBO2005 A PL7 and DI API. I have this problem with an our addon that generates invoices. If I set this properties: .Lines.Price = X .Lines.DiscountPercent = Y and I have Stock Management - Price Lists - Special Pr

  • Our first time

    So, you may have gathered from the title; My wife and I have started this beautiful journey into the social, collective, artist and eccentric communities which are more along our lines of topics and events. We are both artists, my wife a painter and

  • CAML Query fetchmore than 5000 items or not?

    Hi Friends, I have 100000 items in my SharePoint list. I want to retrieve only 50000 items. Is it possible through SPQuery(CAML query)? or It will through any errors threshold value more 5000 items fetching from the SPQuery? Please anyone help me. Th