SOLMAN 3.2 abap only install. Adding Java?

I'm running SOLMAN 3.2 SP10+ on WEBAS 6.20.
Is there a note anywhere that tells me how I might add the java stack components to this install?
We had some advice early on in our implementation that said we didnt really need the Java stack.  As we move forward with BI and EP it has become pretty clear that we should at least have it on our SOLMAN install.
Thanks in Advance,
M.
P.S.  Also thanks for the SOLMAN forum. Finally :P

Hello Michael
For normal SolMan operations you don't need the java stack (but a windows client! SolMan Transactions don't work with the JavaGui).
If you have a Netweaver04 system with SP-Stack >= 11 you can use the Solution Manager Diagnostics as a separate installation, see the link
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000634682&
I cannot tell more, because have decided to wait for SolMan 4.0 (March 2006) which will have it incorporated.

Similar Messages

  • Install ABAB stack after a JAVA only install

    Does anyone know if I can install the ABAB stack after allready doing a Java only install. We are in the porcess of upgrading our EP5 Portal to a NW04 portal version. In EP5, the unification technology for web-gui is on a separate server were-as in NW04 it is integrated into the ABAB stack during an Add-In" installtion. The problem is that I allready did a JAVA only install and I now need the the unifier capability in the portal.
    Any suggestions ???

    Hi Stephen and all the others in this message,
    The only install options are:
    Install Abap only
    Install Java only
    Install Abap+Java add-in
    So it's not possible to add a Abap install to a Java only installation. SAPInst has no options for this. Also rewriting all the startup scripts and stuff will be more work than just doing a new install Abap+Java add-in.
    Best regards,
    Hay

  • Impact of Installing BI Java on an ABAP only BI 7.0 system

    Afternoon Everyone,
    I'm looking to answer a couple of questions around installation of BI Java on an ABAP only BI 7.0 system.
    Firstly, I am looking for some guidelines around common problems we would expect to see if a BI java stack is implemented on a BI 7.0 system that is currently ABAP only.  I would like to be able to gauge the impact of any such exercise, so we can translate that into extra project effort (both technically and functionally).
    Secondly, I am looking for suggestions around the areas where the post Java install regression testing should be focused so we can ensure the existing functionality of the system is unaffected by the install & activation of the BI Java stack.
    I’d be really grateful for any input you would be able to provide around these questions!
    Thanks
    Tim.

    Hi,
    Pls Look at note 917950, esp. Problem_Analysis.zip in Attachments for the Installing BI Java on an ABAP only BI 7.0 .
    For  Some more thoughts ,pls chk below link
    https://www.sdn.sap.com/irj/sdn/threadmessageid=3034054#3034054
    What are the pros and cons of installing java+abap stack for portal?
    WAS 6.4 with Java or ABAP + Java
    http://help.sap.com/saphelp_nw70/helpdata/en/29/ff9036e1e4b603e10000009b38f889/frameset.htm
    *pls assign points,if info is useful*
    Regards
    CSM reddy

  • Introscope Host Agent for ABAP only instance, fails with java.lang.NullPoin

    Hello,
    I'm trying to configure the Introscope Host Agent Adapter for ABAP 7.02 instance.
    Solman Version is 7.1 ST 4, BASIS SP9.
    I did created the Trust relationship between DAA and hostctrl and
    also the same setup working find for Java Instance or ABAP+java Instance,
    I'm not sure whether IS Adapter can be installed for ABAP only Instance.
    Log file from Solman:
    java.lang.NullPointerException
    at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:119)
    at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setJCoUserAndPwd(AgentConfigWriter.java:1085)
    at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setLogonData(AgentConfigWriter.java:1075)
    at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.createJcoDestinationVO(AgentConfigWriter.java:677)
    at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.prepareSapAgentConfiguration(AgentConfigWriter.java:284)
    at com.sap.sup.admin.wily.hostagent.Setup.setupAgentConfiguration(Setup.java:272)
    Thanks
    Srikanth M

    Hi
    I am sure, it is logically incorrect, how you deploy byte code agent in abap only instance
    Introscope Bytecode Agent runs on managed systems based on J2EE engines to report data to the Introscope Enterprise Manager, so it has to be setup only for Java Stacks.
    Please check with the wily config guide again.
    I am watching this thread for further view from others.
    Thanks,
    Jansi

  • SAP BI 7.4 ABAP Only, Do i need Java stack

    Hello,
    We are implementing BI and currently we only installed BI ABAP Stack only, customer will look for reporting and dash boards In future. Customer also has plan to implement SAP Business Objects. Could you please advise me here
    Do we need BI Java stack for BOBJ ? With out Java can we do reporting and dash boards ? Can some one please help me to understand
    Please
    Thanks,
    Aravind

    Hi,
    SAP Business Objects Business Intelligence 4.0 is installed on any machine ( windows/unix, depending on your architecture). It is integrated with a backend BW(also called BI) system. Now this BW(BI) system needs to be dual stack ( both ABAP and JAVA; as many features of SAP Business Objects Business Intelligence 4.0 requires BW java portal).
    You cannot add ABAP ( like an add-on) to already installed java stack. ( though the reverse is possible, but not with NW 7.3).
    What you can do now is to install NW 7.3 ABAP as a separate system and then integrate your NW java with your ABAP ( i.e, change the UME from java databse to ABAP in your java stack). This has to be done as ABAP+JAVA installation option ( as a single instance) is not available for NW 7.3 ( exception being for PI and Solution Manager). No further change in SAP Business Objects Business Intelligence 4.0 is required.
    For more infor refer to
    BI and BO - ABAP, Java or Dual stack
    Regards

  • Error while Installing the Java Add-In for an Existing ABAP System

    Hi all,
    I need help, i am Installing the Java Add-In for an Existing ABAP System
    SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
    These are the last few lines on the sapinst.log.
    INFO 2009-05-21 12:35:12
    Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:18
    Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:19
    Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc\tbx.
    INFO 2009-05-21 12:35:21
    Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
    INFO 2009-05-21 12:35:22
    Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    INFO 2009-05-21 12:35:23
    Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    FCO-00011  The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
    Thanks in advance for any help.
    Kiran Chebrolu

    Hi,
    Hope this note would solve your issue, please read carefully and validate with your issue
    Note 1032019 - Java Add-In: Error when you create the SCS instance
    below notes give your suffice information.
    Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
    Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
    Note 1025789 - RUNR3CMD generates CPF0006
    regards
    nag

  • Installing the Java Add-In for an existing abap system

    Hi, Currently we are Installing the Java Add-In for an existing abap system.
    Following the steps (Installation guide):
    1) We sucessfully installed the Central Services Instance (SCS)
    2) We sucessfully Installed the Database Instamce Java Add-In
    Our problem comes in the third step
    3) Central Instance Java Add-In
    When the system prompts me the SAP System Identification (Select the central instance of your local host).
    I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
    (The same value)
    I chose anyone, and click next.
    The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
    Any help is appreciated, and I will reward points if helpful.
    Regards

    I followed an advice made for a sap consultant, and delete some profile files.
    I had the following files
    DEFAULT.1.PFL
    DEFAULT.2.PFL
    DEFAULT.BAK
    DEFAULT.PFL
    DEV_DVEMGS00_bsomtymx005
    DEV_DVEMGS00_bsomtymx005.BAK
    DEV_SCS01_bsomtymx005
    START_DVEBMGS00_BSOMTYMX0
    START_DVEBMGS00_bsomtymx005
    START_SCS01_bsomtymx005
    after to delete the files, I have the following files
    DEFAULT.BAK
    DEFAULT.PFL
    DEV_DVEMGS00_bsomtymx005
    DEV_SCS01_bsomtymx005
    START_DVEBMGS00_bsomtymx005
    START_SCS01_bsomtymx005
    Then, I restarted the installation, and the sapinst allow me to continue with the installation.
    I really do not know if the installation will be sucessful, but this issue is solved.
    Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

  • Install BI Java Add-in for ABAP system error

    Dear all:
    I want to install Java Add-in for my ABAP system. My ABAP is SR3
    Nw04s. During the CI install for Java Add-in steps: install software
    unites, i got one error like this:
    Error: Aborted: development
    component 'caf/eu/gp/model/eap'/'sap.com'
    Mar 17, 2009 2:28:29 PM Error: Aborted: development
    component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'3', grouped by software component 'SAP-
    EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'3':
    Caught exception during application deployment from SAP J2EE Engine's
    deploy API:
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT
    deployed. The Deploy Service returned the following error:
    com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected
    exception. java.net.SocketException: Connection reset
    Exception is:
    com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception. Nested exception is:
    java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(SocketInputStream.java:168)
    at com.sap.engine.services.rmi_p4.Connection.run
    (Connection.java:395)
    at java.lang.Thread.run(Thread.java:534)
    Can you give me some advice about this? Thanks.My JDK 1.4.2_19 for IA64.

    thanks

  • How to install  AS JAVA to exsting AS ABAP

    Hi,
    A task is assigned to me to fulfill the requirements of BW consultant for preparing the DASHBOARD.
    I got the below requirements from him :
    1. NW04s with J2ee engine
    2. Configuration Of ICM
    3. BI Content 3.5.3 SP6
    4. NW04s SPS14 (Visual Composer)
    5. Enterprise Portal 6.0 Or 7.0
    My current BW system configuration is: -
    OS: - SUN Solaris
    Database: - Oracle 10g
    SAP: - Ecc 6.0 SR1 (ABAP)
    *SP level: -
    SAP_BASIS: - SAPKB70011
    SAP_ABAP: - SAPKA70011
    SAP_APPL: - SAPKH60003
    SAP_BW: - SAPKW70012
    My queries regarding above requirements are
    1. I already have installed BW on ECC 6.0 (ABAP),Can I install JAVA stack in existing ABAP system? How ?
    2. How can I configure the ICM?
    3. What is BI content 3.5.3 SP6 & how can I install it?
    4. How can I install Visual Composer (NW04s SPS14)?
    Please help me to understand the above queries to fulfill the requirements.
    Thanks,
    Sachin

    Hi,
    1. I already have installed BW on ECC 6.0 (ABAP),Can I install JAVA stack in existing ABAP system? How ?
    A. Yes. You can install BI java stack as a separate Instance like ABAP instance. Just run the ./sapinst and select java stack.
    2. How can I configure the ICM?
    A. Use tcode:SMICM and check the all services. Then use tcode = SICF and activate all , Right click on Default option and select activate all servies.
    3. What is BI content 3.5.3 SP6 & how can I install it?
    A. BI_CONT 3.5.3 is used for extra features of BW.
       Use tcode = SAINT, then install BI_CONT3.5.3 based on steps.
    4. How can I install Visual Composer (NW04s SPS14)?
    A. Its simple. Better download visual Composer installation from SMP(http://service.sap.com/download or http://help.sap.com)
    Regards,
    Srini Nookala

  • WAS 6.40 SR1 - abap client copy after java addon install

    After installing the WAS 6.40 SR1 abap+java central instance and database instance... we inadvertently proceeded to install the java add-on (j2ee). We realized we needed to do an abap client copy of "000" to a new client.
    Is there a way to do the client copy, then point the java engine at the new client?
    If not... what are our options. Is there a way to just uninstall the existing java-addon, do the client copy, then re-install the java-addon? We're hoping that this is correctable and we don't need to do a full re-install.
    Thanks in Advance for any assistance.

    Hello,
    can anybody help me?
    Regards,
    Ralf

  • Best practice to install Bi-Java

    Hi,
    We are in the process of designing the system landscape for our client. We have installed NW04s usage type EP on one server. Now we need to decide on where to install the BI-Java usage type. So:
    1. Is adding BI-Java on the existing EP usage type is recommended
    2. What is the best practice:
      a> EP and BI-Java on the same server
      b> EP and BI-Java on separate servers
    What are the pros and cons of each choice.

    Hi,
    When you install BI JAVA, it will have its own EP and AS JAVA usage types under it. You have no option with this as they are required to run BI JAVA (just like you have AS ABAP under the BI usage type).
    The decisions you do have are:
    1. Should BI JAVA be installed on the same server as the BI usage type? (this is your choice)
    2. Should you use the EP usage type within the BI JAVA for your enterprise portal deployment or just keep it dedicated for BI usage only and use a separate EP usage type for your enterprise portal deployment. (most customers will do the latter option due to patching and upgrading options).
    Please see the SAP NetWeaver 2004s master guide for more information. In addition we are updating the master guide with more information on this area. It should be published quite soon.
    Cheers,
    Mike.

  • Why SMD agent on ABAP only?

    OK.  I don't get it.  Why install SMD Agent on ABAP only systems???
    Isn't SMD Agent used primarily for Java???
    I have 37 systems of which only 8 have a java component.  If I install SMD Agent everywhere I'll
    need a much bigger SolMan server!!!
    What is SAP policy on SolMan 7 Enh 1 OS/DB migration???
    Can I migrate from this little Intel Linux box to a serious AIX LPAR?
    Will SAP give me a migration key???
    Ken Chamberlain
    University of Toronto

    About the migration, you can migrate without problems. You'll need study the following process "Heterogeneous system copy".
    There's a component that checks just this kind of problems related with migration. BC-INS-MIG.
    Check the documentation below.
    http://www.sapdb.info/homogeneous-and-heterogeneous-system-copy/
    http://www.fulleffectsolutions.co.uk/Html/technical-sap-hetero.html

  • Installation Of Solman 7.1 aix Oracle failed with Java Error

    Dear All,
    We are doing SOLMAN Installation 7.1 SR1 AIX Oracle.
    Now the installation stopped at the 19th phase "IMport ABAP"as in the attached screenshot.
    OS : AIX 6100-07-02-1150
    Database:  Oracle 11.2.0.3
    Java Version currently maintained:  java version "1.4.2"
    When i checked in log File  import_monitor.java.log  (  /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS) ,
    [root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] cat import_monitor.java.log
    java version "1.6.0_45"
    Java(TM) SE Runtime Environment (build 6.1.051)
    SAP Java Server VM (build 6.1.051 23.5-b02, May 30 2013 05:04:21 - 61_REL - optU - aix ppc64 - 6 - bas2:197575 (mixed mode))
    Required system resources are missing or not available:
      Import directory '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1' does not exist;
      Import directory '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP2' does not exist;
      Import directory '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP3' does not exist;
      Import directory '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP4' does not exist.
    [root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS]
    Also i checked all the above import Directories [
    '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1'
    '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP2'
    '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP3'
    '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP4'
    ] and all the above import directories are present in my system.
    Later from the above log, i compared the Java Version of our System
    [root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] java -version
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20110630 (SR13 FP10) (JIT enabled: jitc))
    [root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] which java
    /usr/java14_64/jre/bin/java
    Kindly clarify the below Queries.
    1)Is the above Solman installation error was due to Java version? If so, do we need to install   java version "1.6.0_45" in Solman Server to proceed with the installation.
    2)Cant we proceed the Solman installation with the current Java version (java version "1.4.2") of our System .
    3) What is the actual Prerequistes to be maintained for JAVA.  I have downloaded the Installtion guide from SMP.
    but in the installation guide, The exact java version to be maintained to proceed with the Solman Installation 7.1 SR1 is not mentioned anywhere.
    4)If we install the Java 1.6, do we need to start Solman installation from the scratch . Any reboot required after installing java 1.6?
    5)Because of the inconsistencies in java version in our System, The installation shows the Error " Import directory does not exist  "?
    6)Please tel the cause of the Error
    Kindly assist to proceed with the installation
    Regards,
    Gayathri.K

    Hello Gayathri
    The import_monitor.java.log says the JRE used is 1.6 - java version "1.6.0_45"
    There must be multiple JRE's installed on the system.
    Run the below command and check the output
    ls -lad /usr/java*
    Few things I would try.
    Is the '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1' an NFS mount ? If yes use a local file system.
    Create a directory called /SMINSTALL and move all from /cddumps/Solman_Export_Cds
    It should look like /SMINSTALL/51042607_1/DATA_UNITS/EXP1
    Start the installation.
    Try to use Java 1.4 or 1.5 and see if that helps.
    You need to set the environment variable JAVA_HOME before starting the installation.
    export JAVA_HOME=/usr/java14_64/jre
    Are there any files/directories under 51042607_*/DATA_UNITS/EXP* ?
    Regards
    RB

  • How do I populate 0CCMSATPH for ABAP only instance

    Hi All,
    I have inherited a SAP Solution Manager installation and I am trying to configure the system correctly.
    In an Early watch report for one of our ABAP only systems (ERP6) it states
    Reading performance data from BW returned neither data nor an error code. A timeout may have occurred.
    Infocube: 0CCMSMTPH used in section 'Workload Overview <SID>'.
    So I determined that this related to End to End Analysis and configured SOLMAN accordingly and am now getting data for SOLMAN itself in this cube but nothing else.  I also determined that the Extractor WA (STATISTICAL RECORDS SECONDARY EXTRACTOR-0CCMSATPH) from Extractor FWK Administration is responsible for this data.
    So my question is this, where does this extractor come from as I don't appear to have this extractor for the ABAP system it's complaining about?
    SMS uses SMDAgent but that's because it's a dual stack system but for an ABAP only system surely this isn't required, if this is where the extractor comes from?
    Also a related issue, in the log for this extractor for SOLMAN it has the following message "DL: Warning: Component not found in Target Structure:0INFOPROV".  What is this and should I be concerned?
    Thanks
    Craig

    Does this topology/configuration make sense? Yes.
    To set up "agent only" instance:
    1] Install MDEX,
    2] Install PlatformServices (answer N for running EAC),
    3] On Central server update AppConfig.xml (add definition for new dgraph),
    4] On Central server "runcommand.sh --update-definition"
    5] Install Deployment Template by running deploy.sh (answer N for integrate with Workbench),
    6] Start ECA, which starts dgraph - $ENDECA_ROOT/tools/server/bin/startup.sh (Make sure you don't have eca.xml in $ENDECA_CONF/conf/Standalone/localhost)
    7] On Central server "initialize_services.sh",
    8] On Central server "runcommand.sh DistributeIndexAndApply"
    Is the agent only server suppose to also have Workbench and/or our application (configuraitons)?No and no.
    How does the Control server know there is another instance which is running with just an EAC agent?The AppConfig.xml on the Central server instance needs to be updated. Don't use the Workbench EAC admin console to do this. Only use that interface for stop/start and monitoring. Any permanent config changes you should make to AppConfig.xml by hand.
    How is the dgraph process on the agent only instance started?$ENDECA_ROOT/tools/server/bin/startup.sh
    How do I "turn on" an EAC agent only instance/server?
    Edited by: EndecaJoe on Nov 9, 2012 8:55 AM

  • SAP NetWeaver 7.02 SP9 64 bit AS ABAP Trial Vers w Java(TM) 6 Upd 31 Oracle

    Hallo all,
    I'm going to install
    SAP NetWeaver 7.02 SP9 64 bit Application Server ABAP Trial Version
    It is said that
       JRE 1.4.x or JRE 1.5.x (for installation only)
    is required and that
       (JRE 1.6 is not supported)
    Actually on my Windows-7-PC I installed
      Java(TM) 6 Update 13 (64-bit) Sun Microsystem, Inc.
      Java(TM) 6 Update 31 Oracle
      Java(TM) Platform, Standard Edition
               Runtime Environment
               Version 6.
    Is it possible to install
      SAP NetWeaver 7.02 SP9 64 bit Application Server ABAP Trial Version
    under my JRE-version?
    Very kind regards for your support
    Frank Hastrich

    Dear Frank,
    In case of ABAP only server JDK is required by sapinst to install the system so i think it should work for you.
    If you are able to start sapinst then you can install Netweaver ABAp server.
    Regards,
    Vipin

Maybe you are looking for