SOLMAN 4.0 - SP15 - SPAM stops -saplsfes
Hi all
We are running in a deep trouble now with Support pack 15 installation on Solution manager 4.0. I started the SPAM with SP15 queue and it was running fine until it started with sapkb70014.
Whats the problem with this patch? Even sapkb70013 had similar issue. Is that these patches are getting released before proper testing? Whatever, but customers are running in deep trouble with these ever long running patches.
SP15 is running for more than 36 hours now, constant increase in transport logs. We are unable to use the system for past two days. When we try to login it says ABAP error code: Error and a blank page followed by syntax error at program saplsfes. The known issues with SP15 didnt have this issue updated yet. I have opened a high priority message and waiting for SAP's answer.
Any one came across this issue? I dunno how to stop the batch job since Im unable to get into the system. And also Im worried to shut down the system to restart since transport logs are growing.
Please advice.
Thanks
Subbu
Hi Subbu,
we went into same troubles while implementing SP stack 15 into SolMan.
We waited for over 24 hours regarding the import of SAPKB0013.
Running
brconnect -u / -c -f stats -t SYSTEM_STATS
brconnect -u / -c -f stats -t oradict_stats
on our ORACLE DB fixed the problem and performance was very good again so the import went fine.
Thanks for the hint!!!!!
Regards,
Claus
Similar Messages
-
hi all,
I am importing SAP_APPL patch (SAPKH60004) on our development system.
we have ECC 6.0 with MAXDB database.
the import stopped by saying
spam status : modify Ajustments.
next action : perform Adjustments
any sugestions
thnx and regards
Edited by: kavitha l on Apr 12, 2008 11:13 AMAdjust the Modification in SPAU, and later continue with SPAM
You can also note the programs affected in SPAU and adjust them after the SPAM. Make sure you do the adjustment before you apply the next level patch for the same. -
Console spam: Stopping Handoff advertising
I am not normally one to be too worried about Console log messages, but I just noticed a huge amount of spam in my system log.
I am getting this message pretty much continuously:
16/11/2014 13:36:56.308 sharingd[349]: 13:36:56.307 : Stopping Handoff advertising
I am getting about 100 of these every hour!
So Does anyone know what this means and how to stop it???!
ThanksI have the same problem.. The way i feel it is that my machine freezes all the time :-(
Part of my log:
17/11/14 15.40.17,323 sharingd[232]: 15:40:17.322 : Starting Handoff advertising
17/11/14 15.40.25,686 sharingd[232]: 15:40:25.685 : Starting Handoff advertising
17/11/14 15.40.34,477 sharingd[232]: 15:40:34.477 : Starting Handoff advertising
17/11/14 15.40.41,118 sharingd[232]: 15:40:41.117 : Starting Handoff advertising
17/11/14 15.40.50,106 sharingd[232]: 15:40:50.105 : Starting Handoff advertising
17/11/14 15.40.59,200 sharingd[232]: 15:40:59.199 : Starting Handoff advertising
17/11/14 15.41.06,376 sharingd[232]: 15:41:06.375 : Starting Handoff advertising
17/11/14 15.41.15,371 sharingd[232]: 15:41:15.371 : Starting Handoff advertising
17/11/14 15.41.24,798 sharingd[232]: 15:41:24.798 : Starting Handoff advertising
17/11/14 15.41.30,906 sharingd[232]: 15:41:30.906 : Starting Handoff advertising
17/11/14 15.41.36,439 sharingd[232]: 15:41:36.438 : Starting Handoff advertising
17/11/14 15.41.38,440 sharingd[232]: 15:41:38.440 : Stopping Handoff advertising
17/11/14 15.41.39,117 sharingd[232]: 15:41:39.116 : Starting Handoff advertising
17/11/14 15.41.47,908 sharingd[232]: 15:41:47.907 : Starting Handoff advertising
17/11/14 15.41.56,865 sharingd[232]: 15:41:56.864 : Starting Handoff advertising
17/11/14 15.42.05,864 sharingd[232]: 15:42:05.864 : Starting Handoff advertising
17/11/14 15.42.13,442 sharingd[232]: 15:42:13.442 : Starting Handoff advertising
17/11/14 15.42.22,392 sharingd[232]: 15:42:22.391 : Starting Handoff advertising
17/11/14 15.42.30,911 sharingd[232]: 15:42:30.910 : Starting Handoff advertising
17/11/14 15.42.39,933 sharingd[232]: 15:42:39.933 : Starting Handoff advertising
17/11/14 15.42.49,183 sharingd[232]: 15:42:49.183 : Starting Handoff advertising
17/11/14 15.42.52,064 sharingd[232]: 15:42:52.063 : Starting Handoff advertising
17/11/14 15.42.59,054 sharingd[232]: 15:42:59.053 : Starting Handoff advertising
17/11/14 15.43.03,864 sharingd[232]: 15:43:03.864 : Starting Handoff advertising
17/11/14 15.43.05,865 sharingd[232]: 15:43:05.864 : Stopping Handoff advertising
But i also see thise a lot:
17/11/14 15.40.07,146 discoveryd[51]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:16716
Do any of you see this as well?
Best regards. -
Error while doing transport to Quality from Solman
Dears,
I am using Solman 7.0 SP15.
I have recently configured Charm,Now to test it funcationality I created one transport and as per process released it by solman.
Now I am trying to import this request by Solman into QAS but it is giving error:
TMS communication error with TMSSUP#QAZ.DOMAIN_DEV
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSSUP#QAS.DOMAIN_DEV
System Response
The exact error message of the system is:
Name or password is incorrect (repeat logon)
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
I checked all RFCs are working fine with authorization test,RFC TMSSUP#QAZ.DOMAIN_DEV is also working fine but its created with clicked logon screen option that i read is OK.
We have one RFC destination to 000 Client of our domain controller DEV.
Please suggest do i nead to create RFC destnations to QAS and PRD also to import requests or what is the root cause of this issue.
Shivam
Edited by: Shivam Mittal on Jan 22, 2009 9:30 AMHi,
TMSSUP#QAZ.DOMAIN_DEV Client 000 ...
Looks like the user who performs action "import to qas" does not exist in QAZ (000).
/cheers -
Hi,
I am having problems configuring SolMan to use data collected from SLD to populate SMSY. I have configured a number of development and test systems in RZ70 to send information to SLD via the server and gateway which i can clearly see in Netweaver SLD. Now i am trying to configure SMSY_SETUP to use SLD to populate SMSY. I ran SLDCHECK to check and it failed on the RFC connections which ic created according to note 1057720 and it finds the connections LCRSAPRFC, SAPSLDAPI but they fail with the message:
RFC ping returned exception with message:
Error when opening an RFC connection
I checked SLDAPICUST and changed the password for SLDAPIUSER which works if i log into Netweaver SLD but SLDCHECK still fails. i followed the troubleshooting document "System Landscape directory problem analysis scenarios" using the flowcharts but it does not describe in detail what it means by Analysis in JCo RFC provider: server configuration then -> start JCo RFC destination on page 7. I had a look at SMGW but i cannot make sense of it. I guess if the LCRSAPRFC, SAPSLDAPI connections worked then i would expect to see an entry in "logged clients" with the program ID under TP name, setup in the RFC connection. Can someone please assist me in this?
Using: SolMan 4 ABAP SP15
Java SP is yet to be updated.
UNIX server. At the moment it test system setup with Java and ABAP servers running on single UNIX server.
regards,
Manisorted it out myself...
-
Why am I getting 30 to 40 spam emails daily since switching to firefox Didn"t happen in IE8
Since making firefox my default browser, I am bombarded daily with spam email. This didn't happen when IE8 was my default browser. It's driving me crazy.
I can't think of a reason for you to see more spam in Firefox than in IE. Are you using the same email service, same Inbox?
If you make IE your default browser (you can always start Firefox using its shortcut without making it the default browser), does the spam stop? -
SAPCCM4X agent reports active eventhough its stopped at OS level
We are having sapccm4x agent running on NW PI 7.1 system connected to Solman 7.0
When we stop the agent or if the agent process stops / killed, normally its reported at SAP level as Inactive and availability as 0
On Solman system
RZ21 --> Technical Infrastructre --> Display Topology --> Agents for Solman system SID --> Agent for Remote SAP system -->
the particular agent status is ONLINE and it tests properly
Also
RZ20 --> CCMS Technical expert monitors -> CCMS Selfmonitoring --> SID --> CCMS Agents
Reports the status and availability MTE as green
But at OS level
ps -ef | grep ccm
sapccm4x -stop pf=<instance profile path>
it says AGENT IS STOPPED
I cleared shared memory as well using command
sapccm4x pf=<instance profile path> -initshm
Please help, Thanks
Regards
ShanmugaThanks Ragu,
I tried the same
But since SAPCCM4X is connected to Solution manager as its Central monitoring system
On Solman:
RZ21 --> Segment overview --> did not list SAPCCM4x entry for this managed system
It lists its own local segments
Hence on managed system
RZ21 --> Segment overview -->
SAP_CCMS_hostname_SID_01 Appl. Server hostname_SID_01 - Reset to Warmup status
And then started and stopped agent at OS level, still its reporting active -
Problem:
in MMC solman server has been permanently stopped. I have checked out for Services, restarted the systems, but the server doesnt starts.
please give the solution
database SQL Server.Hi,
Post the startsap log and stopsap log files and also dev_w logs.
Regards
Naveen -
SPAM on Exchange when using "anonymous" authentication on frontend connector
Hi all,
I have Exchange 2013 SP1 installation with all roles on one box. My initial configuration worked fine, I was able to send and receive emails just fine. Yesterday however, I noticed that emails were not flowing anymore and when I checked the Queue viewer,
I saw thousands of SPAM emails being sent - most of them sent to yahoo.com.tw domain. I managed to clean the Queue and I unchecked the anonymous authentication on the default frontend connector and the SPAM stopped but we cannot receive emails anymore (sender
gets 530 5.7.1 Client was not authenticated message).
As soon as I enable anonymous, SPAM starts again. I don't have an external relay, I am sending email directly from Exchange. Can you guys offer any advice as to how to go about this? How do I enable send/receive emails without getting all this SPAM?
DBSo, I managed to get a hang of it, we are in the process of acquiring a third party anti-spam solution, but in the meantime, I stopped spammers using my server by using the built in Exchange AntiSpam agents. I followed the suggestions in this article:
http://www.allspammedup.com/2013/11/exchange-2013-anti-spam-technologies-the-sender-filter-agent/
and set the sender filter agent to block certain addresses and, more importantly, to block empty sender messages. It is all fine for now, but I will keep monitoring it.
DB -
Why are Contact Forms being pounded with SPAM?
Is anyone else experience an unusually high volume of SPAM in thier contact forms?
I have two clients getting pounded with SPAM.
Thanks in advance for your help.The spam stopped once we applied the filters for the Comments and the Akismet is sitting there in the system now so they just need to fully role out the control into forms which will do a lot.
The Amazing thing with that which I need to check with the engineers that I thought is that BC is run by BC, so if they are using Akismet I want to check to see if they are pooling all the spam filters applied on all BC sites into one central database that ALL sites have access too. If they are doing this - SWEET, if not I am going to suggest they do.
THat would mean if your being spammed what you block will mean sites I build will not get those same spam and so on.
Making the captcha more secure agaisnt OCR will make them harder to use so there is negatives you got to weigh up. -
Hi colleagues
Is EHPI supported to execute Solman 7.0 SP15 to 7.01 SP28 ?
I would like to optimize the time of this process and I think EHPI can help me here.Hi Kumar,
Please use SAINT for updating SAP Solution Manager 7.0 to SAP Solution Manager 7.0 Enhancement Package 1. For more
information please refer the note 1169247
1169247 - Additional info for Solution Manager 7.0 EHP1 update
Thank You.
Regards,
Deepika -
Error while importing SAPKB70013 component?
Hi,
We got Solman 4.0 running in windows 2003 server.
When i tried to import the BASIS sp components SAPKB70013, SPAM stopped at XPRA_EXECUTION stage with the following error
"Method push_client is not declared or inherited in the class CL_FDT_STORAGE_DB"
I went thru the sap note 822379 (Known problems with SPs in SAP NW 7.0s)
But i could not find any solution from this note to resolve this issue.
Appreciate your help.
RamHI,
In SPAM i got the following components:
SAPKB70013
SAPKA70013
SAPK-400C4INCPRXRM
SAPKITL423
And here is queue log details:
Post-import method SFW_AFTERIMPORT started for SFBF L, date and time: 20080825172919
Post-processing for SFBF BF_TRANSTEST was already performed successfully earlier
Post-import method SFW_AFTERIMPORT completed for SFBF L, date and time: 20080825172919
Post-import method ACID_CREATE_INCLUDE_AFTER_IMP started for ACID L, date and time: 20080825172919
Post-processing for ACID BADI_CONFLICT_CHECK was already performed successfully earlier
Post-processing for ACID BGRFC_SCHEDULER was already performed successfully earlier
Post-processing for ACID FDT_CALL_SEQUENCE was already performed successfully earlier
Post-processing for ACID FDT_CHECK_GENERATED_RESULT was already performed successfully earlier
Post-processing for ACID FDT_GENERATION_ERROR was already performed successfully earlier
Post-processing for ACID FDT_PROCESSOR was already performed successfully earlier
Post-processing for ACID FDT_STORAGE was already performed successfully earlier
Post-processing for ACID FDT_UNKNOWN_OBJECT was already performed successfully earlier
Post-processing for ACID SBTI_XBP_EXT was already performed successfully earlier
Post-processing for ACID SFW_API was already performed successfully earlier
Post-processing for ACID SFW_TREE was already performed successfully earlier
Post-processing for ACID WDR_CHECK_P13N was already performed successfully earlier
Post-processing for ACID WDR_CONFIG_CHECK was already performed successfully earlier
Post-processing for ACID WDR_EVENT_HANDLER_NOT_FOUND was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_COMPONENTS was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_DYNAMIC was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_EVENTS was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_NAVIGATION was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_P13N was already performed successfully earlier
Post-processing for ACID WDR_RUNTIME_PHASEMODEL was already performed successfully earlier
Post-import method ACID_CREATE_INCLUDE_AFTER_IMP completed for ACID L, date and time: 20080825172919
Post-import method AFTER_IMP_NROB started for NROB L, date and time: 20080825172919
Post-processing for NROB FDT_GENNRR was already performed successfully earlier
Post-import method AFTER_IMP_NROB completed for NROB L, date and time: 20080825172919
Post-import method AFTER_IMP_SXCI started for SXCI L, date and time: 20080825172919
Post-processing for SXCI BADI_DB2CCMS was already performed successfully earlier
Post-processing for SXCI BPM_SPI_AS was already performed successfully earlier
Post-import method AFTER_IMP_SXCI completed for SXCI L, date and time: 20080825172919
Post-import method AFTER_IMP_SXSD started for SXSD L, date and time: 20080825172919
Post-processing for SXSD EXT_SDL_CALLBACK was already performed successfully earlier
Post-import method AFTER_IMP_SXSD completed for SXSD L, date and time: 20080825172919
Post-import method FDT_AFTER_IMPORT started for FDT0001 T, date and time: 20080825172919
Program terminated (job: RDDEXECL, no.: 17290000)
See job log
Execution of programs after import (XPRA)
End date and time : 20080825173106
Ended with return code: ===> 12 <===
| ######################################
Date
Time
Message
MsgID/No./Ty
25.08.2008
17:29:02
Job started
00
516
S
25.08.2008
17:29:04
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
25.08.2008
17:29:04
All DB buffers of application server rambasis were synchronized
PU
170
S
25.08.2008
17:30:20
ABAP/4 processor: SYNTAX_ERROR
00
671
A
|25.08.2008 |17:30:20 |Job cancelled
Thanks
Ram -
Import Basis Support Package 7.00 error
Hi All,
I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
- Write down the Support Packages and Add-Ons that have conflicts.
- Leave this screen by choosing 'Cancel' (F12).
- Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
- Define the extended queue again in the Support Package Manager.
- Import the queue. The Support Package Manager executes all steps from
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Conflicts Between Add-On ST 400 and Support Packages
Software Component Release Support Package Information on
Conflict Resolution
SAP_BASIS 700 SAPKB70009 Include CRT
Can anyone guide me how to proceed.
Thanks,
Sailesh KHi Shailesh,
You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
1. Conflict Resolution Transports (CRT)
A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
P1
CRT1
P2
CRT2
SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
P1
P2
CCRT1
SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
Cheers,
Shyam -
Installation error during creation of user SAPJSF
Hello,
i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
OS:windows 2003 enterprise 64bit
DB:db2 udb
SOlman: 7.0 including EHP1
The error from "sapinst.log":
WARNING 2010-09-17 10:32:40.906
Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
Sep 17, 2010 10:30:30... Info: Formal password check successful
Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:32:40... Info: Leaving with return code 4
The error from "UserCheck.log":
Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
Sep 17, 2010 10:36:59... Info: Formal password check successful
Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:38:56... Info: Leaving with return code 4
Edited by: DimitrisDimas on Sep 20, 2010 5:38 PMhi
wat s ur JDK version??
please refer this,
[SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
jansi -
How to increase emails in email app, newb with Mac
Using the native email app on the Mac, how do i increase the date range of emails that are displayed? Seems it only gave me a couple months of old emails. My ipad3 has no issues with this. Still new to the Mac, not sure which os, def a 10.x.x. Thanks in advance
I wanted to bounce an email from a real person I know,
in real life, I told the person to stop emailing me.
And if they don't stop emailing you, what is bouncing going to do?
Better to create a new email address.
If my bounce doesnt' work I'll just keep junking.
I suspect that would be a far better option.
I wasn't going to bounce spammers....hellowww LOL
Good. Some people believe that bouncing SPAM stops it. There have been
similar requests here before.
Dave
Maybe you are looking for
-
I Have Adobe Reader x and Adobe Acobat 5.0 installed, I am running Windows 7. looking at it I believe Acrobat 5.0 is not compatable. Can I just uninstall it ? do I need both Reader x and 5.0?
-
How to set column names in OVS search help of ALV EDIT
Hi All, I have a OVS search help for my ALV EDIT column.This OVS will have two columns,I need to give the names(name1 , name2) to the columns. I am writing the below codo in phase 0. ls_text-name = 'Column1'. ls_text-value = 'name1'.
-
Old printer with new wireless modem/rout​er
i just installed a new wireless modem/router and need to get my printer to work with my comps....i think i need to reassign the IP address and enter the wep...but dont know how
-
Cannot select TC in TM for Setup
Hello, This is my first time posting in the forums, and I'm fairly new to Macs, so forgive me if I don't do a good job of describing my problem. I just bought a new Macbook (hurray!) and a time capsule. I already have an Imac, both using Leopard. I h
-
Could not activate InfoObject (Runtime Error = UNCAUGHT_EXCEPTION)
Dear Experts, I got stuck on activating an existing InfoObject-A after changing one attribute. Situation - there was no data in the InfoObject at all. - change attribute from InfoObject-B1 to InfoObject-B2 - activate InfoObject-A - got short dump Sho