Solman 4 SR3 MOPZ issue

Did a fresh Solman 4 SR3 install. Completed the post install config. Cannot activate OSS connection yet due to firewall rules. Two issues:
1) when doing the Part II config wizard step, an error occurs and the config step terminates. Nothing in the system log.
2) MOPZ does not exist. Tried adding roles, etc. Still cannot run the transaction. Am I missing an add on or something?

Hi TJ,
useful input for analysis, also if via customer message might be the environment of the regarding job. In order to get it do the following:
Signon as <SID>ADM
call qp2term
ps -ef | grep <SID>
    (gives you an overview of active processes, grep the PID <pid> of your process)
ps eew <pid>
HTH,
   Thomas

Similar Messages

  • Solman SR3 - Questions

    Dear all,
    I have just started installation of Solman SR3 in HPUX/oracle 10g. I have few basic questions
    1. When I start the installation from the installation master, the check box for unicode system (recommended) is by default enabled, when I try to uncheck the box it is not allowing since it is checked and grayed out? does that mean it will install unicode version?
    2. Also I only need to install ABAP stack for solman, we don't want to have AS Java. But there is no option in SR3 to install ABAP alone? does solman needs to have both the stacks?
    Thanks
    Senthil

    1. When I start the installation from the installation master, the check box for unicode system (recommended) is by default enabled, when I try to uncheck the box it is not allowing since it is checked and grayed out? does that mean it will install unicode version?
    Yes - because non-Unicode installations are deprecated and shouldn´t be installed any more.
    2. Also I only need to install ABAP stack for solman, we don't want to have AS Java. But there is no option in SR3 to install ABAP alone? does solman needs to have both the stacks?
    SolMan is ABAP + Java by definition, you can´t separate them (unfortunately).
    Markus

  • Word 2000 with SolMan and EWA issues

    Hi,
    Having a number of issues. It seems since updating SolMan to SP24 EHP1 i cannot open EWA reports in Word 2000 (updating to latest version is out of the question due to business politics). I have tried a number recomendations from OSS notes but none work. I get this error message when i select standard or short version
    Required file not found -> see long text
    Message no. DSVAS813
    No usable file was found for the active Office version in the report defintion.
    Procedure
    Processing cannot continue.
    Please notify the person responsible for this session type or for the SAP Solution Manager, specifying the session number, session group, session type, version number and the number of the message short text.
    To find session information, in the Service Session Workbench, choose Goto -> Technical Information. Specify the Office application and version (which you can find by choosing ? -> Help -> About... ) and the number of the message short text.
    To create a message to SAP, choose Help -> Create Support Message.
    The issue can be resolved by changing the report definition in the Service Session Workbench or importing a newer version of the session definition.
    I am not sure how to change the Word version in technical Information, it seems not so "helpful" help page and how to change the report definition. Any help on this would be appreciated
    I also needed to know how to send previous SAP EWA reports. The landscape is setup to send the EWA reports to SAP on a monthly basis and i need to change this to weekly. i have had a look at the EWA setup operations and it is active and all boxes are ticked.
    thanks,
    Mani

    Hello Mani,
    You can send the data for ABAP system to SAP and process the EWA reports and they can be accessed via your
    Service Market Place inbox, if that was an option you were seeking. How to do so, you need to follow SAP Note 207223.
    The periodic SDCCN EWA task can be scheduled to recurr weekly.
    EWA data on Satellite ssytems is usually only available for the past 3 weeks, as there is no intent to store the data.
    Of course any EWA report can also be opened (click the link on the left side in DSWP) in HTML, so this could be a work around to get any existing or furture EWA reports generated on your Solution Manager system.
    Unfortunately, because Word 2000 is no longer supported by Microsoft, there is little that can be done now, that you are on Word 2000, and have upgraded to an SP level that no longer supports Word 2000. This is your issue.
    However I think I have provided some alternatives to get the reports.
    Regards,
    Paul

  • MOPZ  Issue

    Dear Guru's,
    After configuring the MOPZ, if we try to approve the added SP in solution manager. When I click "Confirm Files in Download Backet" under t-code solution_manager -> Change Management -> Maintenance Optimizer -> Transaction ID -> its throwing a Runtime Errors which has been mentioned below.
    =====================================================================================================
    Runtime Errors RAISE_EXCEPTION
    Date and Time 23.12.2008 15:48:49
    Short dump has not been completely stored (too big)
    Short text
    Exception condition "NOT_FOUND" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    Error analysis
    A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the
    exception
    condition "NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    Trigger Location of Runtime Error
    Program CL_SM_DATA_SENDER_RFC=========CP
    Include CL_SM_DATA_SENDER_RFC=========CM003
    Row 24
    Module type (METHOD)
    Module Name GET_DESTINATION
    =====================================================================================================
    OS : AIX 5.3
    DB : DB2 9.5
    SAP : Solution Manager 7.0
    Suggestion appreciated.
    regards,
    Guna

    Dear All,
    Thanks for your suggestions...
    Mr. Gagan Deep Kaus suggestion won't applicable, coz we have 3 columns in AISUSER t-code.
    Mr. Paul, 1140822 has been implemented and also sub-notes mentioned also implemented.
    Mr. Miguel Ariño, yes your rite we have 3 columns and I use only one customer number and also that Badi deactivated.
    Still I'm facing the runtime errors and also its showing System messages in solution_manager t-code,
    System Messages:
    Error No destination for SAP customer number 20405164
    Runtime Errors         RAISE_EXCEPTION
    Date and Time          03.05.2010 20:53:36
    Short text
         Exception condition "NOT_FOUND" raised.
    What happened?
         The current ABAP/4 program encountered an unexpected situation.
    Error analysis
         A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the exception condition "NOT_FOUND".
         Since the exception was not intercepted by a superior program, processing was terminated.
         Short description of exception condition:
         For detailed documentation of the exception condition, use
         Transaction SE37 (Function Library). You can take the called
         function module from the display of active calls.
    Trigger Location of Runtime Error
         Program                                 CL_SM_DATA_SENDER_RFC=========CP
         Include                                 CL_SM_DATA_SENDER_RFC=========CM003
         Row                                     24
         Module type                             (METHOD)
         Module Name                             GET_DESTINATION
    Could anyone suggest me a solution to close this issue.
    regards,
    Guna

  • CCX 5.0(2) SR2 to SR3 upgrade issue

    Good day.I'm going to upgrade our ccx 5.0(2) from SR2 to SR3.
    As i found out in manual,before upgrade,i should copy wfavvid folder to another location.
    But there's no any step what i need to do with this directory then.
    My question: after upgrade,is there need to replace updated folder with backed up one?
    Or this folder need to be copied only if upgrade was unsuccessfull?
    Thanks.

    Hi,
    I think the copy of wfavvid is simply a safeguard in case you have problems with the upgrade.  You do not want to copy that directory back after the upgrade otherwise.  Just copy it to another location for safeguard and run the upgrade.  Restart when prompted and you should be good to go.  If all is well after testing you can get rid of the copied wfavvid directory.
    Thanks,
    Mike

  • Solman Road Map Issue

    Good Day,
    I have created the new Roadmap using the RMDEF/RMAUTH  and i want to use that Roadmap in one of my Projects in Solution Manager.I have selected the Same Roadmap in Scope of the Project in (Project Administration),But the Structure or Hierarchy which i Created in Roadmap is not showing in the Project.
    Can someone help me with that or if you guys can tell me how to Upload the New Road map in Solman Correctly.
    Thanks and waiting for a Positive Response.

    Hi
    If you are talking about creation of structure in solar01 then it has to be done in solar01 only via the Structure tab
    If  you press F4 and choose the Business Process Repository and you can select all the Business Scenario like Procure to Pay etc which are to be used in you project here
    for non sap scenario directly edit or write it ant then save.
    you can check below link
    https://websmp103.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
    Hope it clarifies your doubt
    Regards
    Prakhar

  • NW SR3 installation issue can't find NW export DVD 3/3

    Hello,
    I'm pretty decent installing SAP on unix and I'm now learning on windows 2008 R2 SP1/MS SQL 2005.  I'm also accustomed to downloading the NW install master, export CD's and unicode kernel dvd.  So here is my question:
    I'd like to just install NW 7.0 SR3 ABAP only to play around and kick the tires on windows.  I've downloaded the following DVD's to start the install:
    NW Install Export 1 of 2  51033493_1
    NW Install Export 2 of 2  51033493_2
    Install Master windows x64  51038621_13
    NW 7.0 SR3 UC-Kernel 7.00 Windows Server on x64 64bit   51033508_15
    I've already installed MS SQL and SAP jre.  SAPINST runs fine up to the point where I point it to the NW export DVD's.  There are only 2 export DVDS for an install but 3 DVDS for an upgrade.  The install is failing trying to find the third export DVD, but there are only 2 for an installation.  I've also doubled checked my install master was correct as well.
    It's probably something simple, but I'm stuck....
    TIA
    Scott

    Hello and thank you for the response.
    I was setting up a distributed landscape. I had already installed the global host and I was receiving this message while trying to install the database instance.  I've since started to download NW 7.3 for Windows.  I spoke with a co-worker and it made sense for a demo landscape to use the latest version.  I hope to have better luck with 7.3. 
    Thanks again for the reply.
    Edited by: Scott McCullough on Sep 5, 2011 2:49 PM

  • Check Index Existence - Trex SOLMAN Solution Database Issue

    Hi Experts,
    I have done all the configuration part for having solution database functionality in SAP SOLMAN system. Our basis team has also installed TREX successfully.
    But while checking in transaction CRMC_SAF_TOOL, everything is green except Check ndex Existence.
    We are getting the below error messages:
    Failed [Check=Index Existence ,Knowledge Base=SDB ,Language=E]
    Failed [0 ]
    Failed [No. of Documents=1-]
    On discussion with Basis Team, I came to know that Indexes are getting created at putty level and while going to the indexes (Menu - Goto- Indexex (F8) in CRMC_SAF_TOOL, everything is seems to be fine and successful. No error there.
    Please suggest where I am going wrong as I am still not able to search in IS02.
    Thanks & Regards,
    Madhu

    Hello,
    Sometimes this error is seen when an older version of Trex being used.
    Are you on a current version of Trex? If not you may want to consider upgrading to a current version?
    Additionally, sometimes documents saved via content management cannot be indexed,
    as no url can be determined for them.
    4. knowledgebase SDB_ATTACHMENT:
       The URL's do not get determined and this is why nothing would be
       put to TREX.
       Herefore, please follow the following note:
       685521 Logon data for /sap/bc/contentserver service
    This may explain the HTTP:/no. DOcuments =1- error ???
    So please ensure you have set the URL for the content server as per Note 685521
    Regards,
    Paul

  • MOPZ issue for E-Rec 6.0 Server

    Hi Experts,
                 I configured MOPZ in solution manager for E-Rec 6.0 server, If i choose calculate the files automatically I am getting error as " No Addon Product Version allowed for transaction: SAP E-RECRUITING 6.0 (01200615320900001315)". Kindly help me.
         Thanks in advance.
    Regards,
    Sampath.

    Hi Sunny,
                Sorry if i go to system -> status -> our server is "SAP NetWeaver 2004s", But is is E-recuirement server, if i go to smsy i can able to find SAP E-RECURTING. Here my doubt is i need to register under SAP E-RECURTING or I need to register under SAP NETWEAVER.
                Kindly help me.
    Regards,
    Sampath.

  • SolMan Wily discovery issue

    Hello
    On my SolMan setup my system cannot find my CA Wily installation.
    I installed it into E:\usr\sap\CCMS\Wily, Windows service is working fine, I also installed management services without any problems but Solman is not recognizing it.
    My Solman is 7.1 SP12 and I also installed latest patches to Java stack.
    How can my Solman recognize Wily?
    Best regards

    Hi Kaan,
    1st Check Wily and agents are running.
    2nd Check Maintenance mode is set to OFF in agent admin
    3rd Share the details in INFO in above screenshot.
    OR
    Delete users SM_INTERN_WS and SM_EXTERN_WS and delete all logical ports using system preparation steps and then re-run these steps
    Regards

  • MOPZ issue :Unable to create new transaction

    Hello All,
    We have recently installed ECC6 EHP5 ready, and now want to apply the latest patches for it.
    when I try to create new transaction from DSWP-->change Management -->Maintenance Optimizer -->Crete new trasaction  it is throwing an error .
    I have sufficient authorizations from both ends (solmon system and to my s-user)
    Solmon roles  -->YY(SOLMAN_BASIS_MAINTAIN)     
                                YY(SOLMAN_DSWP_ADMIN)          
                                YY(SOLMAN_ISSUE_MGMT_MAIN)     
                                YY(SOLMAN_LANDSCAPE_MAIN)     
    S-User Roles  --> Maintain System Data Authorizations
    System Details:
    EHP1 SOLMON 7.0
    AIX5.3/ORACLE 10g
    Can any one guide me what is the exact problem and how to avoid the same.
    ERROR Log from the dump raised
    A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the
    exception
    condition "NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    url level error log which showed on the browser
    Error when processing your request
    What has happened?
    The URL http://ussappsm00.corpnet2.com:8055/sap/bc/webdynpro/sap/wda_mopz_plan was not called due to an error.
    Note
    The following error text was processed in the system PSM : Exception condition "NOT_FOUND" raised.
    The error occurred on the application server ussappsm00_PSM_55 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_DESTINATION of program CL_SM_DATA_SENDER_RFC=========CP
    Method: GET_ASSIGNED_SUSERS of program CL_MO_SMP_ADAPTER=============CP
    Method: LOAD_SHORT_TEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
    Method: LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
    Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system PSM in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ussappsm00_PSM_55 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ussappsm00_PSM_55 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 800 -u: RRD42469 -l: E -s: PSM -i: ussappsm00_PSM_55 -w: 0 -d: 20110715 -t: 041437 -v: RABAX_STATE -e: RAISE_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Awaiting your response.
    Best Regards
    Rakesh

    Hi,
    You will need the standard SAP Change Management work center role assigned to you. If custom role it should be derived from this role SAP_SMWORK_CHANGE_MAN
    Regards,
    Srikishan

  • SolMan / BW Logical System Issue

    Hello all, I am having a SolMan/BW related issue and would really appreciate some advice. I realize some of this is for the BW forums and will cross post (I normally dont)
    ENVIRONMENT
    New installation of Solution Manager EhP1 (19). System name is ED0. We are running Windows / MS SQL
    System is only for Solution Manager ops (client 001), and CUA master (client 950).
    BACKGROUND
    We want to use full SolMan capabilities. This seems to include some limited BW interaction. We do not use BW in the landscape, so will rely on the "internal" BW in SolMan.
    During installation, our person made a new client (000 > 400), set it as default (login/system_client), then ran tc:RSA1 and activated the content. (This sets the client)
    Client 400 HAS NOT BEEN USED FOR ANYTHING other than the initial installation, and subsequent activation of BW. It has no connections to other systems, no data, cubes, or anything
    PROBLEM
    We were NOT AWARE that he had ran RSA1 and activated content, and began using client ED0_001 as our PRODUCTION SolMan client.
    We are now unable to run RSA1 in anything but client 400.
    We are unable to change the client 001 logical system name because Solution Manager has been built around it.
    TROUBLESHOOTING
    We changed table RSADMINA / field BWMANDT to 001 from 400. This changed the error from "You can only run in client 400" to "The logical system name has changed" (exit only)
    In sandbox I duplicated this problem, then deleted the 400 client (with T000 entry). Changed the login/system_client to 001, RSDAMINA to 001, and ran function module RS_MANDT_UNIQUE_SET (set i_mandt to 001). After restart, RSA1 gives same error, logical system name changed"
    On same sandbox after #2 above I attempted tc: BDLS to see if it would let me assign an exisiting logical system. It did not
    QUESTIONS
    Will it have any impact on Solution Manager operations to have the "BW Client" on ED0_400 while Solution Manager production is on ED0_001?
    Is it possible to change the BW operating client to 001 from 400? (said another way, can I change the current logical systems BW is keyed with to a different, but existing, logical system)
    Assuming the answer to Q1 is yes, and the answer to Q2 is no, what steps need to be performed to make BW fulfill the SolMan requirements?

    Updated Information - Answer to Question #1
    I am embarrased I missed this section in the master guide the first time around.
    There are three major options to consider when planning your system landscape in regards to BI.
    BI in the Productive SAP Solution Manager Client
    In this scenario, BI is used in the same productive client as SAP Solution Manager. This option allowsfor simpler configuration, and isolates the BI activities conducted for solution life cycle management from the data on a production BI instance. This is SAPu2019s recommendation.
    BI in a Separate Client on SAP Solution Manager
    In this scenario, BI activities are conducted in a separate client on the SAP Solution Manager system. This scenario provides increased security, as user access is more restricted. However, you must maintain users separately and this increased your administration effort. There is no technical benefit.
    BI in a Separate, Non-Productive BI System
    In this scenario, the BI activities are conducted in a separate, nonproductive BI system in the landscape. Data is sent to this system from the SAP Solution Manager system via RFC. This is only needed in rare cases for sizing purposes.
    I will leave the question unanswered in case someone has an easy rememdy to changing the BI client logical system, as I would like to have it in my productive client if possible.  However I am relieved I have the option of running it separately in case that can't be done.

  • MEdia disk for Solman 4.0 Sr3 Instalaltion master

    Hi Experts,
    I want to install Solution manager 4.0 SR2, can any one please suggest me the media i need to download for Solman 4.0 Installation master SR2 (Media disk no). I can find the Solman Sr3 Instalaltion master but i coulld not find the Sr2 Disk.
    Please help me with this.

    Hello, See ora_sql_results.log
    Are you trying to install this solman for a customer ? If yes, then you should go for latest release solman 7.1
    Thanks

  • SSO Issues while opening a ppt file document only from Solution Manager

    Hi Experts,
    Version - Solman 3.1
    Issue
    =====
    While trying to open a Powerpoint(ppt) file document, from the service provided by Solution Manager thru a weblink:
    1.A SSO authentication request of the server pops up requesting to authenticate Windows userid/password
    2.After entering the windows password the first time..authentication is requested again..At times on the second chance of authentication, the request is successfull and the powerpoint document opens.. But we have faced issues wherein the issues had persisted for 5-6 chances and only then the ppt document opens.
    3.Point to be noted is that even if the SSO authentication of the windows password is cancelled even the first chance the document opens..
    4.Issue is only with powerpoint document and not with word document..
    Going by point 3.. there is no relevance of the windows authentication to popup since authenticating or not authenticating doesn't matter.
    Issue unknown is why is that whenever only a ppt document from Solman is being opened does the SSO Windows authentication window of Solman server opens.. Is there any settings to be considered..
    Regards,
    Nagendran

    Since I am new to the field requesting the kind quick help by java experts here to help me change the code so that I would be able to search a web apge saved on disk and search and highlight a word in that page ....
    Thanks in advance........
    Looking forward for your kind suggestions......1) Did you write that code? If yes, proceed to 2). If no, I charge 150 euros/hr. Let me know when you want me to start.
    2) Post the code for a program that opens a text file with the following in it:
    hello world
    and prints the contents out using System.out.println().
    3) Modify the program in 2) to determine if the file contains the word "yes". Post the code.
    4) An html file is no different than the text file in 2).

  • Mopz - Requested Attribute Change Package 'TXGLO=====600' not deliverable.

    HI ,
    I am trying to generate the stack files in Solman using Mopz for upgrade from ERP 6 EHP 5 to EHP 7.
    But in step Choose Add-on Products i get below error
    Requested Attribute Change Package 'TXGLO=====600' not deliverable.
    Message no.BORMMSGDELTACALC164
    Any help would be really appreciated.
    Thanks.

    Hello,
    so far, the reply I have received is that it should be possible to implement TXGLO 601 during this Support Package update.
    I am not sure I agree with that take, I will discuss whether it is possible to release the ACP in some way. It does not look easy though.
    Best regards,
    Miguel Ariño

Maybe you are looking for