SolMan 7.0 + IDES ERP 6.0 on 1 machine for 1-man-show with MaxDB?

Sorry - I know that what I've done is unusual and somewhat suspect, but anyway: I've successfully installed -just for personal interest- both (SolMan 7.0 plus IDES ERP 6.0 SR3) on 1 machine, which is a very small PC with Windows Server 2003 x64 and MaxDB. I can start SolMan OR I can start ERP. But every time the used memory climbs up to about 10 to 12 MB.
If I would start both in parallel (but I hav'nt done that yet because I had not the courage to find it out), real + virtual memory might not be sufficient (and the mainboard of the pc does not allow more than 4 MB of memory).
Has everyone ever tried to downsize the default parameters of sapinst to the lowest possible values for a 1-man-show? I wunder what the minimum values for all the parameters of such a SolMan + ERP on MaxDB configuration might be, that would perfectly work if there would be only 1 user?
Is there any help or interest in this? If I could not receive helpful answers, it might be possible to me to provide the results of my furthers studies. But I would really prefere to make use of other collegues' experiences first. Thank you for your answer.

> Sorry - I know that what I've done is unusual and somewhat suspect, but anyway: I've successfully installed -just for personal interest- both (SolMan 7.0 plus IDES ERP 6.0 SR3) on 1 machine, which is a very small PC with Windows Server 2003 x64 and MaxDB. I can start SolMan OR I can start ERP. But every time the used memory climbs up to about 10 to 12 MB.
> If I would start both in parallel (but I hav'nt done that yet because I had not the courage to find it out), real + virtual memory might not be sufficient (and the mainboard of the pc does not allow more than 4 MB of memory).
Hi there,
first of all - you're talking about Gigabytes instead of Megabytes are you?
Thought so... Anyhow, it doesn't matter how much RAM you can put into the machine, since Windows supports virtual memory, a.k.a. a pagefile.
So basically it's not a question if the whole thing would run, but rather a performance question.
The next thing is: you didn't try it. Why not? What bad thing should happen?
Move on - try it out.
MaxDB will start as well with a very small data cache.
NetWeaver will start with only a few disp+work processes and perhaps you don't need a J2EE instance.
Depending on what you want to do, you can save a lot resources.
regards,
Lars

Similar Messages

  • Problem with integration of IDES ERP 6.0 EHP4

    Dear friends,
    We have to integrate  IDES ERP 6.0 EHP4 sytem to Solutionmanager 7.1 SP4.
    We are not able to add the product instance SAP ERP 6.0 as mentioned in:
    http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
    Under landscape verification, selection for IDES system in product assignements is red, it's requires not only "ABAP technology for ERP EHP4" , but also "SAP ECC Server" with Productversion SAP ERP 6.0. As allready mentioned, it's not possible to add under TC "/nLMDB".
    Thanks for any hint
    Kind regards
    Thomas

    Hi Thomas,
    In LMDB, until you have maintained the details properly status shoudl be red.
    For technical content, you have to manually add all the details , like system name, host, DB server credentiials, instance number,
    product instances, software component versions.
    you can edit that using techical system editor.
    you can get the LMDB demos on service.sap.com\rkt-solman
    please check,
    Thanks,
    Jansi

  • IDES ERP 2005 ECC 6.0 SR2 - unicode  configuration

    Hi Experts,
    I successfully installed IDES ERP 2005 ECC 6.0 SR2 - unicode on windows 2003 32 bit with oracle10g on my home computer.
    The system has inbuilt mySAP Business Suite components: BW 7.0/SEM 6.0, SRM 5.0, CRM 5.0, SCM 5.0, GTS 7.0 etc.
    I can find the data of the IDES model company in client 800. but when I login onto client 001 I am not able to access model company data with the help of transaction mm03.
    RFC connections are ok between the clients.
    I will be thankful if you could address my following query:-
    Is there any way to access model company data from one client to another client on the same computer.
    Please help!!
    Edited by: Gurdeep Antil on May 5, 2009 5:43 PM

    I suggest you ask in another forum. This forum is for portal related questions. I will however say that the general rule is you can only look at data in the same client to which you have logged. This is the basis for all SAP security.

  • IDES ERP 6.0 incl. EHP5 Installation on Windows 2008(R2) , Oracle 11g

    Dear Team
    Is the installaiton of IDES ERP 6.0 incl. EHP5 possible on Windows 2008(R2) and Oracle 11g?
    Thanks & Regards
    Lakshmi

    Hi,
    You can check for this information at https://service.sap.com/pam
    PS: This is the not the right forum for this question.
    Regards,
    Vishnu

  • IDES ERP 2004 Database Instance

    Hi sdn gurus,
    I am try to install the ides erp 2004, database(MS SQL 2000 enterprise edition).The central instance installation was successful but database instance is stalling at Database load(post processing stage)with an error in the log file as
    sapparam: sapargv( argc, argv) has not been called. sapparam(1c): No Profile used. sapparam: SAPSYSTEMNAME ...
    Can anybody give me an idea how to solve this problem Thankz in advance
    Yogi.

    The DB load part of the installation is lengthy so I suggest letting the installation finish and then try to start sap.
    If the installation aborts during the load process , retry.
    Thanks,
    Damien

  • IDES ERP 2004 - System Requirements

    I am about to install IDES ERP 2004 on a test desktop system and I would like to know if you have recommendation over the minimum system required.
    I am installing it over XP professional.
    I am installing it using minimum system landscape (AS + DB on the same machine).
    This is what I was aiming for:
    Single PROC, 3 Gb RAM, 500 Gb Disk. Am I too high?
    Any suggestions?
    Thanks
    Message was edited by: Leonardo De Araujo

    Hi Satish,
    I have sent you the ERP 2004 Master Guide and the ECC 5.0
    installation guide. The IDES installation is same as a DB
    instance installation. You have to select the IDES DVDs
    for ECC 5.0 during SAPInst. For more on ERP 2004 guides
    visit http://service.sap.com/instguides -> mySAP Business
    Suite -> ERP -> ERP 2004.
    Hope it helps
    Regards
    Srikishan

  • IDES ERP 2004 installation / Solution manager

    I am about to install IDES ERP 2004 on a test desktop system and I would like to know if I also need to install solution manager, any suggestions?
    Thanks
    Frank

    Hi Frank,
    Welcome to SDN!
    You can find the guide for ERP 2004 installation at
    http://service.sap.com/instguides -> ERP 2004. Its
    the same as a DB instance isntallation. You just have to
    provide the IDES DVDs. No need to install the solution manager.
    Regards
    Srikishan

  • I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    Looks like its fixed.     I am syncing it now.      A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well.  My old phone is now an 8 gig ipod.  the books app no longer works and that *****.....but better than nothing...

  • HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

    my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

    By the way, i am using Windows 7 x64 and updated itunes

  • Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

    Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help., Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

    Remember you can only build an iPad app using your Single Edition solution (which is included in your CC membership). So you'd need a Pro or Enterprise version of DPS to be able to create the Android version.
    You can create pop-ups in InDesign using the slideshow options and a multi-state object. But it's all manual labour so you'll spend a lot of time on this, also depending on the layout of your design.

  • Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

    Hi all,
    I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
    SAP ECC 6.0 7.00 - 64bit
    SAP ECC 6.4 7.01 - 64bit
    SAP BI 7.1 7.01 - 64bi
    I was wondering whether there are compatibility issues with any of the above mentioned versions.
    Your feedback is appreciated.
    Regards,

    Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
    [http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

  • How to Map ERP account group on SAP Cloud for customer

    I am puzzled that i do not find a way to configure ERP Account Groups to SAP Cloud for Customer solution. Am i missing something or some workaround is possible to do have that available in a ERP<-> HCI <-> C4C scenario.
    Regards
    Apoorva

    Hello Apoorva
    This is the Business Partner Role Code  - it maps to customizing in ERP for: 
    Logistics - General -> Business Partner -> Customers -> Control -> Define Account Groups and Field Selection for Customers
    -ginger

  • HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • Can we unlock an iphone which one locked with an email address and password.I have no idea about the email address and password for the icloud

    can we unlock an iphone which one locked with an icloud email address and password.I have no idea about the email address and password for the icloud.can any one help me about this.

    It sounds like you are talking about an iPhone that has been Activation Locked.  This article explains:
    http://support.apple.com/kb/PH13695
    If so, the iPhone can never be unlocked without the original Apple ID and password.  This is an anti-theft measure.

  • HT1727 I am trying to sync my iPhone/iPad and I am getting a message "This update is for an app download with a different Apple ID.  Sign in with that ID and try again."  I have tried everthing including resetting my apple ID and password.  Ideas?

    I am trying to SYNC my iPhone and mine iPad and I am getting the message "
    This update is for an app download with a different Apple ID.  Sign in with that Apple ID and try again."  I do not have another apple ID.  I have tried everything including resetting my password.  Everything I can think of.  Ideas?

    Hi julia151,
    I would first use this article to make sure any extra Apple IDs were not accidentally created when signing up for one of Apple's services:
    Apple ID: Finding your Apple ID
    http://support.apple.com/kb/HT5625
    If you can't locate one, try using this article to delete and redownload your app:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Cheers!
    - Ari

Maybe you are looking for