SOLMAN 7.0 Installation Error BDS_CONN22
Hi,
I encountered a problem when installing Solution Manager 7.0 on Windows with DB2 for LUW 9.1
During Import ABAP phase I got the following error:
(DB) INFO: BDS_CONN22 created #20080721171911
(DB) ERROR: DDL statement failed with SQL error
( CREATE UNIQUE INDEX "BDS_CONN22~0" ON "BDS_CONN22" ( "CLIENT", "LOIO_ID", "CLASSNAME", "CLASSTYPE", "LOG_SYSTEM", "OBJECT_KEY" ) ALLOW REVERSE SCANS )
(SQL error -205)
error message returned by dsql:
SQL0205N Column or attribute "CLIENT" is not defined in "SAPSOL.BDS_CONN22". SQLSTATE=42703
(DB) INFO: disconnected from DB
Anyone knows how to resolve or bypass this error. I am stuck with the installation.
Thank you.
Hi,
Check with following link
1. http://www.cs.toronto.edu/db/courses/343/Summer2003_L5201/DB2/msgs_2.pdf
2. Check the DB connection at OS level
Regards,
Srini Nookala
Similar Messages
-
Solman 4.0 installation error at Import Abap phase
Hi All,
I have started installing Solution Mangaer 4.0 and in the Import ABAP phase i am getting the following error.
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070219155320
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070219155406
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: APPL_DIAL created #20070219155406
(DB) INFO: APPL_DOMA created #20070219155406
(DB) INFO: APPL_DTEL created #20070219155406
(DB) INFO: APPL_ENQU created #20070219155406
(DB) INFO: APPL_FUGR created #20070219155406
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_FUGRG" ( "AREA" , "DEVCLASS" , "OBJ_NAME" ) AS SELECT T0001."AREA", T0002."DEVCLASS", T0002."OBJ_NAME" FROM "TLIBG" T0001, "TADIR" T0002 WHERE T0001."AREA" = T0002."OBJ_NAME" AND T0002."PGMID" = 'R3TR' AND T0002."OBJECT" = 'FUGR')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ISM\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070219155406
Can you see to that and guide me what needs to be done.
Thanks in advance,
Sailesh KHello Sailesh,
The SQL error 942 error occurs when an object that does not exist is
referenced.
R3load creates views on several tables and fails creating
"APPL_FUGRG" because one of the tables referencing is missing
on db-level.
This is most probably due to an error which happened during the
import/load of tables before. It might also be that some load
processes are missing completely.
There may be some corruption of the export files, e.g. when NFS mounted
filesystems or wrong mounted CD-ROMs used
Another reason could be that SAPINST was restarted when there were still
some R3load processes running (Note 454368).
Please check for existence of "bck" files in the same directory
where the SAPVIEW log is (files like SAPVIEW.TSK.bck).
If there is, please retry the load with R3load, by adding the
command -merge_bck according to Note 455195.
Hope this helps,
Dolores -
Adobe creative cloud installation error 201
adobe creative cloud installation error 201
How to solve this problem?Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You -
I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!tools is at the top of the apple updater but dont get your hopes up
-
Software Update, 10.6.6 installation error!!
Hi all, hope someone can help.
I have a Mac Pro running 10.6.5. I upgraded to 10.6.5 recently and had problems with this. When using Software Update, it would download, log out and install only to get an error at the end saying it couldn't install, with no explanation of why. I did some investigation and it boiled down to Safari (one of the updates in the list to install along with 10.6.5) wasn't being replaced. I had to delete Safari from my applications folder before updating. I tried rebuilding permissions and even installed from the installers from the apple download page. but until I deleted Safari from my apps folder it would fail every time.
Since I assumed that it was a corrupt copy of safari and all other update went ok I assumed I had fixed the problem.
Now I'm trying to install the update of 10.6.6 via Software Update. and I'm getting the same problems. It downloads, reboots, installs then at the end says that it was not installed because of an error and promps me to restart.
I have downloaded the update and run it from the desktop and it goes through the install as follows:-
Installing
optimizing system
Moving files
installation failed.
It seems that it isn't able to replace existing files on my system with new ones therefore fails the install.
Has anyone got any ideas? I have repaired permissions with disk utility and tried repairing them while booting from the 10.6.3 system disc, still no joy
Many thanksWorse problem here. I get the installation error then the computer attempts to reboot and I get locked at the gray background apple screen. Tried safe boot power on +SHIFT a status bar comes up and goes 3/4 away across and locks. Running permissions repair from Mac OEM disk set was no help. Had to do a time machine restore. Seems my install error is catastrophic. On the upside time machine works very well.. A bit disappointed with my Windows-esque crash
-
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)
I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR
I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
deniseHi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Installation error in invoking target 'agent nmhs'
Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size 1336624 bytes
Variable Size 922749648 bytes
Database Buffers 553648128 bytes
Redo Buffers 12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-KhaffafHi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13. -
iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Windows 7 Production Premium CS4 language pack installation error + solution
Ok. Long story short...(For solution scroll all the way down)
Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
...BUT
Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
Ok. So...Questions shortly:
How to get my Production Premium installation work in Windows 7 and get back to work?
How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
EDIT:
Well...This is what I got from the error report:
Adobe After Effects CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Encore CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Flash CS4 Extension - Flash Lite LangPack Common
Error:
Error 2.
Adobe Flash CS4 Payload LangPack (en_GB)
Error:
Error 2.
Adobe Illustrator CS4 LangPack (en_GB)
Error:
Error 2.
Adobe OnLocation CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack_x64
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Soundbooth CS4 LangPack (en_GB)
Error:
Error 2.
LangPack (British) for DeviceCentral
Error:
Error 2.
Tried installing different language but it still won´t work...
Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
Any ideas anyone?
EDIT:
Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
EDIT:
SOLUTION...
Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
Hope this tip is helpful!
Now...Back to work!WOH, just what I needed.
My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen! -
Windows 7 installation error: "Apple Mobile Device" failed to start.
Towards end of recent iTunes software update on Windows 7, I had an installation error within starting services "Apple Mobile Device" failed to start, etc. Pressed IGNORE option. Appears to install but fails to load saying msvcr80.dll missing.
Any ideas. The old version of iTunes now loads ok but will not connect to my iPhone 4S. It crashes when the iPhone option is clicked.You need to follow the instructons of tt2 in https://discussions.apple.com/thread/5822086 to straighten that out.
-
Installation Error SAP NW CE 7.1 Java on Windows 2003 SP2
Hi folks,
I am getting an installation Error when trzing to install the Preview Version of CE7.1
Installation will terminate in Step 28 of 34 with the Message
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Anz Ideas how to terminate the Installation_
Best Regards
ChrisHi,
I solved the issue bye updating jvm manually. Both jspm and update manager didn't update successfully.
Thanl you for your support.
Resolution (to support adobe document services for my specific instalaltion)
Check JVM version in Netweaver u2013 open file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf. See SAP JVM version
(e.g. sapjvm version: 5.1.055)
If SAP JVM version is earlier than 5.1.0.55 apply the patch from SAP Note 1469491:
1) Download patched JVM from the link provided in SAP Note 1469491 for
required platform
2) Unpack downloaded SAR archive using Netweaver SAPCAR tool
3) Check JVM version and platform in file sapjvmmanifest.mf. E.g.
sapjvm os: NTintel
sapjvm version: 5.1.055
u201Csapjvm osu201D should be the same as in the installed NW JVM u2013 see file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf
4) Stop Netweaver services
5) Substitute Netweaver JVM folders
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvm_5 and
c:\usr\sap\<NWinstance>\SYS\exe\jvm\NTI386\sapjvm_5.1.0xx by SAP JVM
from the patch package
6) Start Netweaver services -
Installation error message 1603 for itunes 8.0.2.20
Need help. Installation keeps failing. Says that it cannot install. I'm on XP Professional. Removed all Itunes and QuickTime software using MS Uninstaller. I've disabled ant-virus and firewalls. Below is the text from the ItunesSetup.txt in the temp directory
=== Logging started: 2/6/2009 15:06:18 ===
Command Line:
Using single-platform PRODUCTCODE.
Product to install: {F5C63795-2708-4D15-BF18-5ABBFF7DFFC8}
Information on cabinet file 'C:\Documents and Settings\TaranDiya\Desktop\iTunesSetup.exe'
Total length of cabinet file : 68878416
Number of folders in cabinet : 1
Number of files in cabinet : 7
Cabinet set ID : 0
Cabinet number in set : 0
RESERVE area in cabinet? : no
Chained to prev cabinet? : no
Chained to next cabinet? : no
fdintCABINET_INFO
next cabinet =
next disk =
cabinet path = C:\Documents and Settings\TaranDiya\Desktop\
cabinet set ID = 0
cabinet # in set = 0 (zero based)
fdintCOPY_FILE
file name in cabinet = iTunes.msi
uncompressed file size = 37101056
fdintCLOSEFILEINFO
file name in cabinet = iTunes.msi
fdintCOPY_FILE
file name in cabinet = QuickTime.msi
uncompressed file size = 27953664
fdintCLOSEFILEINFO
file name in cabinet = QuickTime.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2083840
fdintCLOSEFILEINFO
file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = AppleMobileDeviceSupport.msi
uncompressed file size = 13441536
FDICopy() failed: code 4 [Corrupt cabinet]
Executing: "C:\WINDOWS\system32\msiexec.exe" /i "C:\DOCUME~1\TARAND~1\LOCALS~1\Temp\IXP055.TMP\iTunes.msi"
Returning: 1603I am not sure about this particular error number. Looking it up in Windows Installer error messages, it says file in use, restart may be required. But I am not certain that it is a Windows installer error message.
It certainly is worth trying a restart.
I would also clear your temporary Internet files and re-download iTunes.
Also clear your temporary directory as that seems to be where the error occurred.
This article on trouble installing iTunes includes instructions for clearing the temp folder (towards the end of the page) and also other things to try.
http://support.apple.com/kb/HT1926 -
I'm trying to download iTunes on Windows Vista, get system adminstrator won't allow this kind of installation error. What should I do? It's 64-bit.
Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems
Maybe you are looking for
-
Help with purchasing with from another country's Music Store
I'm trying to buy some song from the German iTunes Music Store but iTunes won't let me because my credit card isn't a German credit card. I don't see why this is a problem because the artist and Apple are still going to get money from my purcashe, ju
-
How to specify maximum No. of Sales Orders ?
Hi SD Gurus, The problem is that I want to give my Customer a special discount for 1st 10 orders, after that the condition type will be deactivated from 11th sales order. Can u all tell me the process ? Regards Rajarshi
-
Org unit not reflecting in Infotype 0001
Hi, While hiring a new employee, the"Organizational Unit" is not getting reflected in Organisational Assignment IT 0001. This "Orgn Unit" field is showing the default value as "Zero" Please can anyone tell me what could be the reason & how to rectify
-
Call Bean from normal java class
Dear Friends, Is it ok to call an entity bean or session bean frm normal Java class. (Java class is in the same application as the beans). Is there a special way to lookup the beans from normal java classes. Thanking You, Chamal.
-
Attribute Importance - Measure Influence of single classes
Hello, I've been solving an Attribute Importance problem recently and identified the most influential factors. Now i want to find out which particular classes of this attribute have the strongest relation to the target. If you take the affinity card