Solman 7.0 - Question regarding "New Maintenance Optimizer Transaction"

Hi All,
Since I'm quite new on Solman transactions, while monitoring my queue, I found 4 tickets that says "New Maintenance Optimizer Transaction".
This is what's inside:
"Internal Note SOLMAN_ADMIN 08.04.2014 08:41:25
The status was set to the value 'Selection'"
Can someone help me on where to find information regarding this, or if this is something I should take a look at?
Thanks!

Hi Bua,
Somebody has created an new maintenance transaction from MOPZ of solman, which is used for generated XML for applying support packs and EHPs.
Selection mean, that the user was selecting the components but has now done anything or updated the status
Divyanshu

Similar Messages

Maintenance optimizer transaction dont see product version for a solution

Hi,
I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
Please guide

Hi Shashank,
If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
Use below steps:
Run Transaction Solman_Workcenter.
Select the Solution Manager Administration tab.
Click Solutions.
Either.
Create a new Solution to add the logical component, or add it to an existing solution.
If a new solution...
Click on New.
Give the solution a name.
Set the Solution Data settings.
Now the Solution exists.
Select an existing solution that you want the System to be placed (can be the new one).
Add the Logical Component to the Solution.
If the system is other than Type Production then...
Go to change edit mode.
Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
Save.
Regards,
Divyanshu

Only 1 Instance show up on Maintenance Optimizer Transaction

Dear all,
I got another issue relate to Maintenance Optimizer transaction under dswc, I have 2 satellite systems under 1 logical component.
On the first step of MO transaction , I select Product Version SAP ECC 6.0, there is only 1 system appear, in fact in my logical component there are 2 systems ( in SP Stack screen both systems appear normally)
Anyone know the cause, or there is any further set to be done ? Thanks...
Edited by: sketcher on Jun 3, 2009 3:02 PM
Edited by: sketcher on Jun 3, 2009 5:21 PM

Hi Sketcher,
In MOpz, you are selecting the product version ECC 6.0
check once if both those remote systems are difined as ECC 6.0 in SMSY or any other product version ? Second system might be defined of type ERP
and, are you able to see all the systems as 'green' in SMSY -> Solution landscape -> select that particular solution and see if the systems assigned are green or not. Also, by selecting the particular system in the same screen, once check include/exclude button and check consistency then.
and, Are you able to see EWA service sessions for both of those systems in that particular solution view ?
Try to go through these Notes
Note 1020789 - Maintenance Optimizer: Allow all systems to be selected
and if the problem is related to the product version, then you should change the product version to the type of ERP instead of ECC 6, I forgot the exact note number for this, but you can try the below one for this
Note 1022072 - Maintenance Optimizer: "No Data Available" message

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

Problems when creating a new "Maintenance optimicer transaction"

Hi!
When I'm creating a new maintenance transaction in the field product version I have no choice it shows "Not available": I´ve already defined the Solution manager.
I´ve followed the spro conf. steps.
My Solution manager is 7.0 patched at:
SAP_BASIS     700                     0015
SAP_ABA             700                     0015
PI_BASIS             2005_1_700     0014
ST-PI             2005_1_700     0006
SAP_BW             700                     0016
SAP_AP             700                  0011
BBPCRM             500                   0011
CPRXRPM     400                     0012
BI_CONT             703                     0008
ST                     400                     0016
ST-A/PI             01J_CRM500     0000
ST-ICO             150_700             0013
ST-SER             700_2008_1     0002
I've found that SLD_UC and SLD_NUC RFC´s failed, the connection test gives this error msg "program SLD_UC not registered" alternatively the NUC one.
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host msfsaptest / sapgw10
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 46
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Sep 11 13:15:27 2008
Error Details     VERSION: 2
Thanks in advance.

Hi,
Try to get some more error info, e.g. like this:
try {
Z_Bupa_Search_By_User_Input searchByUser =
new Z_Bupa_Search_By_User_Input(); "PROGRAM STOPS HERE
} catch (Exception e) {
    msg.raiseException(e.getMessage(), true);
msg.reportSuccess("<<<------"); "THIS LINE DOES NOT
good luck,
Roelof

Error when trying use the Maintenance Optimizer Transaction

I have finally gotten through a major headache setting up a SM box, but now when I try to use the maintenance Optimizer, i get the following messages and it won't go any further.
Information Procedure 8000000051 Saved
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
It stays on the screen to select the logical component and just keeps saving the procedure. I have tried deactivating the old procedures but nothing is working.
Any Ideals.

There was a configuration error, fixed it

Equium M50-216 - Question regarding new installation

Hi there,
Recently rescued an Equium M50 laptop from my flat mate. Was in a bit of disrepair. she said i could have it as couldn't get onto the internet and it appears to be missing some vital files.
Managed to get the wireless working again and removed some of the rubbish that was on it, but there are some bigger issues for instance. Anything USB I plug into it will not install as there are no drivers on the HDD.
I think it probably needs to be formatted and have Windows XP Home Edition reinstalled but I don't have any disks for it and don't want to spend hundreds buying new software for it. Please let me know what my best options are.
best regards
Ed

Hi there,
I have updated windows fully, although there are 7 updates that fail to install. all of them related to Windows Net Framework. Have removed previous installations and tried again to no avail.
Plug and play devices that should install automatically do not install. I have two USB sticks that install automatically (plug and play) on several computers and laptops but both fail to install on this laptop.
When asked to install i have a choice of automatic or choosing a destination myself, i choose Auto.
When that fails i choose 'from a specific location' which also fails, and then i choose the option 'Don't search. I will choose the driver to install'.... in this part there are no drivers to choose from. its like the driver folder has been wiped.
Anyone ever had this problem?
Cheers

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Problem with Maintenance Optimizer...

Hello gurus,
I had a problem which I didn´t reached a solution...
When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
Help me please...! TKS
Best regards,
Joao Dimas

Hi Vijay,
When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
The link above, have you sure that's correct?
What´s the exactly name of document that you refer??
Thanks in advance,
Best regards,
Joao Dimas

Maintenance optimizer downloads error

Hi,
While I am doing the downloads for EHPI Upgrade but after choosing target, it gives me this error.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Message no.BORMMSGDELTACALC164
Please help
Thanks

Hello,
I see that the ACP 'EA-FINSERV617' is released for customers.
I cannot find any issue with the settings for this package.
Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
Best regards,
Miguel Ariño

Maintenance Optimizer List displays many unfinished transactions

Hello,
In our solution manager, many unfinished maintenance transaction are displayed:
<i>8000000080 New Maintenance Optimizer procedure 3: Medium New 15.10.2007 05:30:05 DDIC
8000000071 New Maintenance Optimizer procedure 3: Medium New 24.09.2007 07:52:45 DDIC
8000000070 New Maintenance Optimizer procedure 3: Medium New 12.09.2007 22:13:56 DDIC</i>
These are not relevant and were created while training. How can I get rid of them??
Any help appreciated.
regards, Shantanu

Hello,
We still cannot get rid of this one. Any experts on these please??
regards, Shantanu

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

Error in maintenance optimizer generating Stack File XML

Hi all,
In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
*Collecting XML adjustment input data done with error or warning.
Message no.AGS_MOPZ_PLAN_MSG144*
The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
Thanks a lot.

Hello,
Please check if the SPAM level of the Solution Manager is the latest.
If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
Best regards,
Miguel Ariñ

Deleting existing maintenance items in maintenance optimizer

Hi all,
is it possible, to delete existing maintenance items in maintenance optimizer?
Kind regards
Andreas

It is possible to delete the maintenance optimizer transaction using the steps below:
SE38
-> Run report "CRM_ORDER_DELETE"
-> Enter the maintenance transaction number(ID) of the transaction in "Business Transaction Number" and "SLMO" for "Business Transaction Type"
-> Execute
If the client role is set to 'Production', you would need to temporarily set it to 'Customizing' in order to delete the MOPZ transaction via the report above.
In general, it is possible to follow the note 1329247 and use the archiving object CRM_SERORD with transaction type SLMO to
archive maintenance optimizer transactions. Please note that only maintenance optimizer transactions with status "Completed" or "Withdrawn" can be archived. The transactions can be displayed using transaction code "/tmwflow/maintenance".
It is possible to archive EWA services via the report RDARCH_ARCHIVE_DATA_SOLMAN as described in note 546685.

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Solman 7.0 - Question regarding "New Maintenance Optimizer Transaction"

Similar Messages

Maybe you are looking for