Solman 7.1 and Netweaver 7.3 on the same server

Hi,
I am trying to install a new test environment for SAP Manufacturing execution 6.0.
That software requires Netweaver 7.3, which in turn requires Solution manager for applying Service packs.
My question is:
Can I install Solution Manager 7.1 and Netweaver 7.3 on the same application server running Windows 2008 R2 64-bit?
The DB will be MS SQL server 2008 64-bit.
I Have noticed the following so far:
- Solman requires much lower versions of JCE policy files than Netweaver. Will there be a conflict?
- Solman installation asks for Kernel NW 7.20. Why not Kernel NW 7.3?
Hope that anyone can answer this
Br,
Johan

Hi,
As right said above, Solman is a standalone installation on web application server,
You can refer this FAQ for further guidance [Solman FAQ|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b442d4ea-0c01-0010-a8ad-a4c2eaaf6b76]
check more of SAP solman 7.1 inst guides here
https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000735220&
Thanks,
Jansi

Similar Messages

  • RAC and RAC One Node on the same server?

    Hello all,
    Anyone know if having RAC and RAC One Node on the same server is possible, supported, and recommended? Our architecture group is moving towards this configuration as a standard, and I need solid direction about feasability.
    Thanks for any help you can provide.
    Jack Silvey| CVS Caremark | Executive Advisor, IT Systems | CVS Caremark

    Yes you can have the RAC and RAC one on the same cluster. For support and recommendations raise a service request with oracle support  

  • XI and R/3 Running on the same Server.

    Hello Friends!
    One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
    Now I have again the same challenge, I have only one machine to run R/3 and XI.
    Does anyone know if it is possible to do?

    Hi Tadeo,
    from ERP 2004 you can install XI on the same server.
    Regards,
    Udo

  • BI 7.0 and ECC 6.0 in the same server

    Dear experts,
    In my company the scenarion is like, we have installed ECC 6.0 in server where development work is going on.
    Now we have requirement to implement the BI 7.0 in the same server as already BI content is existing in the same server.
    My question is
    Is it possible to implement the BI on the same server?
    If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
    If No, then what is the use of the BI contents in the ECC 6.0 server?
    Regards,
    SUD

    Hi
    > it possible to implement the BI on the same server?
    Yes, why not? But that will be a separate SAP installation with different SID.
    >If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
    Yes, that is possible. Both the system will be having different Logical system name. You have to create a source system connection from ur BI to ECC system and then data extraction is possible.
    >If No, then what is the use of the BI contents in the ECC 6.0 server?
    BI Content in ECC is there to facilitate data extraction from ECC to BI. It would provide you the structure of data extraction. Presence of BI Cont does not mean a ECC system will be working as BI system.
    Hope this clarifies your doubt.
    Regards
    Anindya Bose

  • Oracle AS and Oracle 9i Client on the same server

    Hello,
    We have a Window 2000 server with Oracle 9i Client. A number of applications running on this server relies on Oracle 9i Client. Could I install Oracle AS on the same machine without causing any problems to the applications using Oracle 9i client?
    Thanks
    Slava

    Oracle software is multi home aware - which means you can install 10 different Oracle products and versions, each in its own unique Oracle Home directory, and switch between and run all 10 different products - even at the same time (assuming sufficient resources on the platform).
    You cannot "+consolidate+" different Oracle Homes - it is an unwise thing to do. The Oracle Universal Installer (OUI) has the means to determine when installing a new product, whether or not you have the option to install into an existing Oracle Home.
    And with OUI you also have the means to uninstall products in which case you can remove the corresponding Oracle Home from your platform.
    Note though that despite multiple homes, certain configuration files will be shared (e.g. +/etc/oratab+ on Unix systems). In such a case you may need to manually update such a configuration file after removing an Oracle Home from your system.
    Oracle XE sports its own installer (setup.exe on Windows) - so it does not use OUI. But it is multi-home aware - and can co-exists with other Oracle products in their specific Oracle Homes.

  • Connection broker and RemoteApp manager role on the same server OK?

    Hello. I may have what seems to be a strange request here. I have a currently working 3 node TS farm consisting of 2 Terminal Servers with the RemoteApp role on them and 1 server running the connection broker. All is running fine but the RemoteApps I have
    published are prohibited to have the clipboard enabled for them due to PCI DSS compliance. I wanted to install some other apps and have the clipboard enabled but since it seems that the clipboard is a server setting and not a per app setting, I was hoping
    to just install these apps right on the server running the connection broker vs building a separate new TS server to host them. These other apps do not need to be in the load balanced environment.
    Can I just install the RemoteApp role on the CB server without any interruption to the farm?
    Thanks,
    Joe

    Hi Joe,
    Thank you for your comment.
    Can you let me the OS version of RDS Server?
    For better understanding, I can explain you that; RemoteApp is not a role which you need to install. But you need to install RD Web access role and then you can publish RemoteApp through that. For eg. If you are using Server 2012\R2 then you need to create
    a collection and after that you can publish the RemoteApp feature which you or your user can use through RD Web Access. 
    As per your comment you have already TS role installed, then you can install RD Web access through role based installation, select the role and server on which you want to install it. Please refer beneath article if you have server 2008 r2.
    Remote Desktop Web Access (RD Web Access)
    http://technet.microsoft.com/en-us/library/cc731923.aspx
    Hope it helps!
    Thanks,
    Dharmesh

  • GRC AC 5.3 and GRC Process Control on the same server

    Hello,
    Can we install SAP GRC AC 5.3 and GRC Process Control 3.0 and GRC Risk Management 3.0 on the same box/ same server.
    Is there a OSS Note, which talks about having the above 3 components on one box?
    Thanks,
    Imran

    Hello Imran,
      1- My 3 question ARE do I need a separate JAVA Stack for GRC Process Control and seperate JAVA Stack for GRC Access Control
    -> No, you can have them installed on save Java stack.
    OR
    Can I use the same JAVA Stack for GRC Process Control & GRC Access Control?
    -> Yes, you can. You have to make sure that you are on SP10 or above for Access Control as only then it will support NW Java 7.01.
    2- Can I use EP 7.0.1 installed on same server for both GRC PC 3.0 and GRC AC 5.3?
    -> Yes, you can.
    3- Can 1 single AS JAVA Database contain both GRC Access Control VIRSA Tables and GRC Process control tables at the same time?
    -> For process Control the tables reside on the backend SAP as it is webdynpro ABAP application and for access control the tables reside on the Java database as it is java and webdynpro JAVA application.
    Regards, Varun

  • Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

    We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
    Thanks
    Jane Zhou

    Kaushal,
    Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
    Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
    Thanks
    Jane

  • BI and ECC 6.0 installation in the same server

    Hello SAP Experts,
    I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
    Thanks & Regards
    Vanitha

    Hi,
    For installing BI,  you have to install Netweaver.
    You already have ECC 6.0 in the System.
    As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
    Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC  System.
    In future you  may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
    I have not seen any scenario where OLTP and OLAP System are in the same box
    But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

  • Exchange 2013 Windows Server 2012 NLB and DAG on the same server

    Hi all, I am installing Exchange 2013 infrastructure with two servers. 
    Both servers have the CAS and Mailbox roles. 
    For mounting on High Availability, will create a DAG. 
    Client Access I have no external Network Load Balancer. 
    I thought about installing the NLB servers in the DAG members, this could not be done before. 
    I do not know if in Windows Server 2012 and Exchange 2013 
    Can I install NLB on members of a DAG? 
    regards
    Microsoft Certified IT Professional Server Administrator

    Hi,
    I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
    role running on separate servers.
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
    Thanks,
    Angela Shi
    TechNet Community Support

  • SQL 2000 AND SQL 2005 ON THE SAME SERVER

    Hi all ,
    I have an installation of    SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
    I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
    Thank's a lot.
    Antonio Voce.

    Hi,
    yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
    look at following blog
    http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
    also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
    but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005  then install solman 4.0
    regards,
    kaushal

  • APO and BW in the same server, is possible?

    Hi Experts,
    We have an BW 7.0 installation, and we are thinking about to install APO in the same server.
    - Is this possible? 
    - Is there any application that integratte BI (Netweaver 2004s) and SCM-APO?
    - I will have only one login or are the separate applications  with individual user and loggin?
    >> Could you give me any link with sap recomendations about this?
    Thank you in advance!

    Hello,
    BW is integral part of APO system & this is mainly used for APO Applications (DP). However yau may not be able to load APO on server where BW is already in place.
    In case you are using BW extensively for other application, recommendation is to have independant BW sytem.
    with regards
    Mangesh A. Kulkarni

  • Null and empty string not being the same in object?

    Hello,
    I know that null and empty string are interpreted the same in oracle.
    However I discovered the strange behaviour concerning user defined objects:
    create or replace
    TYPE object AS OBJECT (
    value VARCHAR2(2000)
    declare
    xml xmltype;
    obj object;
    begin
    obj := object('abcd');
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    obj.value := '';
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    obj.value := null;
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    end;
    When creating xml from object, all not-null fields are transformed into xml tag.
    I supposed that obj.value being either '' or null will lead to the same result.
    However this is output from Oracle 9i:
    <OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
    <OBJECT_ID><VALUE></VALUE></OBJECT_ID>
    <OBJECT_ID/>
    Oracle 10g behaves as expected:
    <OBJECT><VALUE>abcd</VALUE></OBJECT>
    <OBJECT/>
    <OBJECT/>
    However Oracle 9i behaviour leads me to the conclusion that oracle
    must somehow distinguish between empty string and null in user defined objects...
    Can someone clarify this behaviour?
    Thus is it possible to test if object's field is empty or null?

    However Oracle 9i behaviour leads me to the conclusion that oracle
    must somehow distinguish between empty string and null in user defined objects...
    Can someone clarify this behaviour?
    Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
    I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs.

  • Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

    I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

    Just use the same ID.
    These may alos help:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

    Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

    Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
    If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

Maybe you are looking for