Solman 7.1 instalation show oracle not install

Dera all
I install oracel 10.2.0.5 on window 2003 and then i set ENVarible also but when i install  it show that oracle not install, please guid me how i solved problem
Nainesh

Hello,
No need to 'update', just clean up everything from that windows 2003 server.
Re-begin with the installation procedure -
1. First of all - Read the installation Guide two three times
2. Try to have latest OS release if possible, for e.g. Windows 2008 R2
3. Start with SAP installation, Read the installation Guide and SAP Notes
4. Go with latest Oracle release 11.2.0.2, Read the installation Guide and Notes
Thanks

Similar Messages

  • IOS installed apps showing as not installed in App Store

    This problem seemed to start when I was unable to pay my Apple bill. As is usual, the App Store wouldn't allow me to download apps and updates but I signed out my account and then back in and all of my pending app updates disappeared and in the Purchased section, it showed all of my apps as Not Installed in the way of it displaying the iCloud icon rather than Open button. I figured this was due to my Apple bill being unpaid so I forgot about it. Now at the end of the month when I was again able to pay my bill, I did so and yet my apps are all still showing as Not Installed, I should note though, that my apps are installed, available on my springboard and are usable. So I signed out my AppleID and signed back in but still no change.
    I can just go through my Purchased list and press the iCloud button and it again recognises that the app is actually installed and then displays the Open button, but, I have maybe 300 apps installed on a Purchased list of over 1,000 apps so this would be a real pain.
    Is there any better way for me to reconfigure these apps so they return to normal state?

    Hello CCC,
    It is happening on the following devices:
    iPhone5
    iPhone5s (two)
    each have a "Family" generated iTunes account which has been associated to my iTunes account as the organizer. I would probably like to see it resolved on the iPhone5s (son and daughter) first and then the iPhone5 (wife).
    2. I am also experiencing issues with "Mail" using IOS 8 in that email will not delete from my inboxes (same devices as above)...
    3. I also have an issue with iCalendar not syncing events to my family members devices (iPhone5 and iPhone5S) using IOS 8. I entered my son's volleyball games into calendar on my macbook which is associated to my apple id as organizer and none of the other devices  associated to other family iTunes account received the updates. I have an iPhone5 as well and I received the updates.
    4. I am also experiencing issues with Family not recognizing pictures of family members which I have been trying to get fixed up.
    I don't think I have ever experienced this many glitches when updating to a new version from Apple before:(. I sure hope this is not going to be the new norm.
    I have also noticed that Health kit does not allow you to change the unit of measures within the application that it forces you to use the country's standard. This might be fine for younger individuals but as for me who grew up learning imperial and changed to metric halfway through school I would prefer the option to choose which unit of measure to use.
    Thanks for taking the time to respond,
    Dregor104

  • TS1702 i tunes say will install but app not install to my iphone 4s

    i tunes say will install but app not install to my iphone 4s

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • When i downloaded itunes and try to launch the program it says a installed component is not installed. What does that mean?

    When i downloaded itunes and try to launch the program it says a installed component is not installed. What does that mean?

    Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Oracle not installing in WINDOWS 2003 SERVER

    I cound not able to install oracle 10g in windows 2003 server. But its working fine in windows xp. I dont know for what reson its not installing. Once autoexec.exe is started, Its showing a black screen with please wait...... But after
    10seconds its disappearing . Kindly help me. It says its DEP (DATA EXECUTION PREVENTAION) some thing like that.

    It's a Windows "issue", not Oracle :
    http://support.microsoft.com/kb/875352
    Nicolas.

  • ECC6 SR3- oracle not installed

    i start installing sap central instance and oracle on windows server 2003 - 64 bit. first i install oracle software then start installing the sap central instace and after taking exports sap shows error saying oracle is not installed however all the oracle files are existing- any help will be appreciated.
    is there any 64 bit oracle software available for SR3. i know 64 bit patch is there.
    should i change the oracle home manually though it create the oracle directory automatically

    Hi Rizwan Syed,
    I think you have installaed 32bit oracle software and installing 64 bit sap.
    Install 64 bit oracle and then 64 bit sap.64 BIT ORACLE will be there in the same package.
    Regards
    Ashok Dalai

  • Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

    I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
    using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
    My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
    completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
    April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
    server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
    in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
    I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
    My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
    I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

    I just started having the same problem.
    I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
    I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
    I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
    I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
    Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
    I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
    I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
    I proceed to kick off the 100+ downloads needed before i left and left the console up.
    When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
    an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
    I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

  • Oracle Not Installing

    Hi
    I am running Windows XP Professional 64 bit version and I downloaded Oracle 11g along with Client from Oracle's website, but it is not installing.
    Download from the website was successful and also successfully unzipped. I then doubled clicked the setup icon, whiched launched the console window, but then I get an error message, which repeats down the console window "Unable to create file error 23".
    When I downloaded the package, I did ensure that it was the 64bit version I downloaded. Further, I checked on Oracle 10g R2, and this gave the same error message. The funny thing is that Oracle 10g Express installed, but I don't want the express version.
    Can someone please advise me on how to correct this problem to get the install to work?
    Thanks

    Hello,
    You wrote:
    The funny thing is that Oracle 10g Express installed, but I don't want the express version.Do you mean that you made several Oracle installations ?
    Did you choose the 11.1.0.6 or the 11.1.0.7 version (starting with Windows 2008) ?
    You may check the requirement before the installation on the enclosed link:
    [http://download.oracle.com/docs/cd/B28359_01/install.111/b32305/toc.htm]
    Hope it can help.
    Best regards,
    Jean-Valentin

  • Mavericks installed but app store shows "download" not "installed"

    I installed Mavericks on my new (Christmas 2013 Macbook Air) and updated all other apps associated with Mavericks.  When I visit the app store it shows download on Mavericks app but all others show "installed".
    I checked the app installed and in "about this mac" it shows I have 10.9.1.  Why won't the app store show it is installed and should I do something else to complete the install?

    Asked and answered a zillion times since the advent of OS X Lion as a direct download. Please do a forum search before posting.
    The Mac App Store is about apps, not whether an OS is installed. What you got from the MAS was an app, the OS X Mavericks Installer. It self-deletes when it finishes successfully installing the OS. The reason it says Download is in case you need to download the installer app again.

  • HT204088 I installed iphone 5 from iTunes backup but still have one app showing [ ! ] not installed can not find file . How do I get rid of this pop up

    I installed iphone 5 from itunes back up and get a pop up [ ! ] app not installed can not find file. I have looked through everything that have with "CANADA" in the app title. That is the only info there is.

    If you haven't found out which app it is then if you go into list view in the Apps part of your library do any of the apps have an exclamantion mark against them ? If they do then they are the one(s) that iTunes can't find the actual app file(s) for - if you delete that app from your library then if it is still in then you should be able to re-download it via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes, or you can just download it directly on your phone via the Purchased tab in its App Store app

  • T540p Energy Manager shows "Battery not installed"

    Strange issue with my T540p: After having the machine running for the whole day unattended on mains power I come back to a grey Battery symbol with a mouse-over "battery not installed". The battery provides power, as the computer continues to run when disconnected from mains. Shutdown, taking out battery, wait does not change anything. The machine is a Win 7 x64 Power Manager and drivers installed via Lenovo Systems update, dirvers are current, no new available. Did anybody experiance this issue?

    Thank you for your reply, richk! I have tried numerous things, restart, with battery either connected to the mains or not, restart without battery but with mains , taking out battery while it was running. I checked, whether there are old Software/Drivewr packages with the software recommended by ColonelONeil, checked for new drivers, reinstalled energy manager - same thing... Is thereany software, i can use to check whether there is communication with the battery? By the way, I see a new BIOS version, but I can not install as the process requires a "fully charged battery"...

  • LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    Hi ASMX,
    Welcome to the HP forum!
    Your HP Probook is a commercial product.  I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial Forum/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    In the mean time here is a link to your homepage.HP ProBook 6560b Notebook PC Support
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Install error "could not install some modules:"

    After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
    Warning - could not install some modules:
         Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
         Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
    I try to reinstall with the option "repair install" and after that I still get the same error.
    by the way I installed both jdk and the ide. I have an older jdk still on my computer.

    Thanks for response!
    To start the Application Server, open a terminal
    window
    or command prompt and execute the following:
    asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
    Or, on Windows, you can choose
    Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
    Default Server No, in my Programs menue, there's no Sun Microsystems.
    Says Starting and Stopping the Application Server
    chapter of The J2EE 1.4 Tutorial:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
    I browsed the tutorial, it doesn't provide such a trouble shooting.
    Are you sure that you have application server
    installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
    What should I do? Thanks!
    Jenny

  • Imovie did not install, imovie did not install

    idownloaded imovie but it did not install  i cannot find the application

    Unless you have an iOS device, you need to download it from the Mac App Store(or install it from an iLife DVD or the computer's original disks if the computer's running 10.6.8 or earlier) and not the iTunes App Store.
    (87521)

  • Tecra sound card driver will not install "driver was not installed" message

    Hello
    I have a Tecra 9100,running XP pro with s/p 2 and when I try to install the Yamaha AC-XG sound driver it will unzip the files then looks like he's loading the files thru InstallShied, but then a error message comes up "driver was not installed" I have tried several different ways but no success,any help would be greatly appreciated.

    Hi,
    You are using now 6.10.6159.0 D (SP43935.exe) version? Right?
    So uninstall Your audio drivers and try to install previous version 6.10.6087.60 C from here.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for