SolMan 7.1 Java for ABAP Stack ?

Hello
Witch JVM for SAP Solution manager 7.1
OS: Linux x86_64
DB: MAxDB
SAP JVM for Diagnostic agent
PAM provide SAP JVM or IBM JAVA for Java stack, but for ABAP ?
Regards
Eric

Hello
I understand that SAP recommend "SAP JVM" for Diagnostic Agent and Java Stack.
but PAM only mention SAP JVM for stack Java, my Solution Manager 7.1 is a central system (ABAP+JAVA).
Solution Manager JAVA Stack
IBM JSE 1.4.2 64BIT      LINUX REDHAT EL5/X86_64 64BIT      Released      16.05.2011
SAP JVM 4.1                  LINUX REDHAT EL5/X86_64 64BIT      Released      17.05.2011
SAPINST prompt for installing a Java Development Kit, JDK Directory.
I've find information regarding SAP Java Switch Tool, but nothing for SAP JVM installation during SAPINST?
Regards
Eric MOUREY

Similar Messages

SMSY for ERP JAVA and ABAP Stack

Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
I am using Somlam 7.1 on Oracle Linux system.
ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
J12 and T12 systems are connected via JCO.
SLD has been defined for both stacks and they are using the local SLD for the SolMan.
Your help is much appriciated.

Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
I was reading SAP Note 1344564, It states
III.Some Main Instances include other Main Instances (E.g., in SAP
ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
EP Core.). If the including Main Instance is installed, it's not
necessary to mark the included Main Instance(s) for relevance.
Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
Your input is appreciated.
Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

Communicate link between Java and ABAP Stack for https

I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..

Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique.

JAVA and ABAP stack support pakages

Hi,
I am new on installation of solution manager server.
I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
Thanks Reza

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

Rapid Installer for ABAP stack

Hi,
Can anyone help me find the links to download of Rapid Installer for ABAP stack?
I have downloaded NW Rapid Installer 2.5 but apparently that is just Web AS Java. That's what I could conclude from the documentation that was downloaded with Rapid Installer 2.5. I might be wrong as I am a newbie.
Thanks in advance.

Rapid installer is only for stand alone Java stack.
- Digesh Joshi

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

Java and ABAP Stack

Hi All,
I am still not clear about role/function of java and abap stack in XI.
Can anybody explain?

Sireesha,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
please go through links::
ABAP and JAVA in Netweaver stack
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

Problems with MiniSAP-Installation JAVA and ABAP Stack

Hi,
I am a freelance SAP application developer had bought the book and SAP Interactive Forms by Adobe, in order to incorporate me into the topic. In chapter 3, the installation and configuration of an exercise Systemes is described so that you can perform the practical part. I downloaded at the website mentioned the installation files and have performed the installation as described in the book. I have also stopped the service as described in SAP DB WWW.
The installation of the JAVA section runs smoothly and is operational after the installation. The ABAP part crashes, however. According to my research, it is because the ABAP part is also intends to install a MAXDB, although the Java-part has realized this already. Anyone know what I need to do, so I only described as the application server of the ABAP part of getting installed and not again the MAXDB.
Regards

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

Configuring ADS for ABAP stack

Hi,
I am trying to configure ADS for my ECC 6.0 server. It has only ABAP stack. WHen i execute the test report FP_PDF_TEST_00 with sa38 it gives me the following error:
Test Program: Version Information (for Analysis Only)
USAGE ERROR
ERROR CODE : 2
ERROR MESSAGE : ADS
Invalid HTTP connection: ADS
I do not understand how to create the RFC connection ADS since this is only an ABAP stack.

Hi Sridevi
Olivier is right, You need to have ADS configured on Java stack.
Check out the following links for more:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd998b-494f-2b10-c2ab-e3513a857f62
and
ADS connection test in ABAP failed with ADSUser
and
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_wiki&query=timesheet&searchmode=similar&similardocsuri=/wiki/sdn_wiki/wiki/display/emtech/how%2bto%2bconfigure%2bssl%2bfor%2bwebdynpro%2bjava%2band%2bbi
I hope this helps
Regards
Chen

Smsy initial_setup java and abap stack

Hi guys,
I have make an update of my system Solution manager in EHP1 7.1 SP03.
Now i have in the transaction SMSY :
1 more system SOL_NABP (ABAP STACK) initial_setup
1 more system composent SOL (JAVA STACK) initial_setup.
What are these systems (initial setup) ? Do i have to launch it ? How ?
Thanks to help me

Hi Jean,
You need to assign some roles to your user.
please see the link below, may be it will help you and give you a direction..
Solution Manager work center
Regards
Tripti

SAProuter for Jco between Java and ABAP stack

When configuring Jco at Java only, there is an option to use SAProuter.
This is not for SMP download or OSS support.
So is there any document for this kind of SAProuter usage?
Thanks!

I don't quite understand why you need SAProuter between 2 SAP instances, which means they locate in 2 different network segments and cannot communicate each other directly. But let's assume this scenario:
1. ECC in network A, IP 10.10.10.1;
2. Portal in network B, IP 192.168.1.1;
3. SAProuter has 2 adapters, IP 10.10.10.2 and 192.168.1.2.
Make sure all message server and dispatch info are maintained correctly in service file (or corresponding file on other platform) on all 3 hosts, and then when you configure Portal Jco connection routestring you need is /H/<SAProuter IP>/S/3299 to enable them communicate each other. Usually this is for security purpose of potential network attack to SAP hosts from user IP, for instance:
4. All public users in network C, IP 172...*, then you need a SAProuter which has 3 adapters.
Regards,
Effan

SLD required ? if i'm having java and abap stack

Hi,
   How to call a aRFC if i have abap and java stack both installed in my machine,
Thanks,
santhosh.
Message was edited by:
        vanama santhosh

Hi Vanama,
                   U need SLD configured on ur system.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/44/bbb4aaf6cd673be10000000a1553f6/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/44/bbb4aaf6cd673be10000000a1553f6/frameset.htm</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796</a>
U can check this on ur system itself
http://server:port/sld/doc/sld.pdf
Then Jco is also required
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e</a>
regards
Sumit

Error creating Webservice Client in JAVA for ABAP Webservice(WSDL file)

Hi all,
I have created a webservice from a funtion module in the backend.
Using soamanger I downloaded the wsdl file using "Open WSDL document for selected binding" link.
I tested this web service in backend and it is working fine.
Now I am trying to generate JAVA cilent for this webservice using Eclipse and Axis,but getting the following error
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy):
faultCode=INVALID_WSDL: Encountered unexpected element '{http://schemas.xmlsoap.org/ws/2004/09/policy}Policy'.:
    WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element
'{http://schemas.xmlsoap.org/ws/2004/09/policy}Policy'.:
    at com.ibm.wsdl.util.xml.DOMUtils.throwWSDLException(Unknown Source)
    at com.ibm.wsdl.xml.WSDLReaderImpl.parsePortType(Unknown Source)
    at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source)
    at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
    at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
    at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
    at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:516)
    at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:495)
    at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361)
    at java.lang.Thread.run(Unknown Source)
Please let me know,wat needs to be done for this error to get resolved
Thanks
Santhosh

Hi,
I am also getting the same error while generating the client class from IBM Rational Application Developer IDE.
Here is the error I get.
WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
     [java] at com.ibm.wsdl.util.xml.DOMUtils.throwWSDLException(Unknown Source)
     [java] at com.ibm.wsdl.xml.WSDLReaderImpl.parsePortType(Unknown Source)
     [java] at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source)
     [java] at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
     [java] at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
     [java] at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
     [java] at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:516)
     [java] at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:495)
     [java] at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361)
     [java] at java.lang.Thread.run(Thread.java:571)
Did you find out the cause of this issue?
Thanks & Regards,
Vijay

ABAP Stack vs ABAP + Java Stack

Hi All,
We currently have two SAP systems (one for FI and one for HR) both running on ECC 5.0 using a separate ITS box to provide CATS (via FI system) and ESS (via HR system)
We are about to upgrade to ECC 6.0 and replace the existing ITS with the Enterprise Portal.
The EP box will have both the Java and ABAP stacks applied. Now to the crux of the issue...
Do we need to
1. Install both the ABAP and Java Stacks on both the upgraded SAP systems
2. Just install ABAP stacks on both upgraded SAP systems
3. Install ABAP on FI and ABAP + Java on HR
4. Install ABAP + Java on FI and ABAP on HR
I have looked through a number of threads but haven't found a definitive answer to my question...
Your help will be rewarded...with points that is!!
Thanks,

Hi All,
We currently have two SAP systems (one for FI and one for HR) both running on ECC 5.0 using a separate ITS box to provide CATS (via FI system) and ESS (via HR system)
We are about to upgrade to ECC 6.0 and replace the existing ITS with the Enterprise Portal.
The EP box will have both the Java and ABAP stacks applied. Now to the crux of the issue...
Do we need to
1. Install both the ABAP and Java Stacks on both the upgraded SAP systems
2. Just install ABAP stacks on both upgraded SAP systems
3. Install ABAP on FI and ABAP + Java on HR
4. Install ABAP + Java on FI and ABAP on HR
I have looked through a number of threads but haven't found a definitive answer to my question...
Your help will be rewarded...with points that is!!
Thanks,

Java Stack and ABAP Stack

Hi Experts,
i am now confused about these two stacks: Java Stack and ABAP Stack.
for IR objects, like DT, MT, SI, MM, SM, Action, Process Integration Scenario
for ID objects, like profile agreements, receiver determination, interface determination,
1. where are these objects stored in? Java or ABAP stack?
and i know Adapter Engine is run on JAVA Stack while Integration Engine is on ABAP Stack.
2. how do they call the objects stored in different stack during processing?

Hi,
1. where are these objects stored in? Java or ABAP stack?
These objects are basically developed on the JAVA stack, when they are activated their runtime version is created on ABAP stack, which you can check in SXI_CACHE transaction.
2. how do they call the objects stored in different stack during processing?
Runtime versions of these objects are responsible for the execution of the interfaces.
-Supriya.

SolMan 7.1 Java for ABAP Stack ?

Similar Messages

Maybe you are looking for