SolMan 7.1: SAP_BASIS does not fulfill the prerequisites

Hello experts,
in the phase "configuration of managed systems", step 2 I get the following error:
Error
SAP_BASIS does not fulfill the prerequisites (installed: 700 SP0000, expected: 700 SP0001)
Action
Please check SAP Note 1483508 for more information
Check Context
Managed systems prerequisite | ABAP Managed system prerequisite | SYSTEM =ET4~ABAP
Info
SAP_BASIS fulfills the prerequisites (702 SP0000)
Check Context
Managed systems prerequisite | ABAP Managed system prerequisite | SYSTEM =ET4~ABAP
Info
The definition of Technical System 'ET4~ABAP' is correct
Check Context
Managed systems definition | Managed System Definition Status | SYSTEM =ET4~ABAP
The note doesn't help me at all. I have the following releases:
Managed system: SAP_BASIS     702     0007     SAPKB70207
Solman: SAP_BASIS     702     0008     SAPKB70208
No one of both systems is SAP_BASIS 700, does anybody have an idea how to solve this?
Note 1572183 - Authorizations for SAP Solution Manager RFC user is already implemented in managed system.
Thank you and best regards, Basti

Hi Basti,
May be the issue with the system details not update in the solution manager LMDB and SMSY.
Better goto the solution manager system -> LMDB -> Resynchronize the SLD detaisl for ET4 system. so it will fetch the latest details from SLD( also check in the SLD, ET4 having latest update and check the last update details) and update in the ET4 system, also check the job LMDB* . it will fetch all the details and updated in LMDB.
After syn also system is not update, try the below option
Goto SE38 and run the report RLMDB_SYNC_TECHNICAL_SYSTEM.and follow the below document
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/f6/a41e0402664451b9c4640ff4513527/content.htm
After ET4 system update, run the managed system setup it will solve the issue
Rg,
Karthik

Similar Messages

  • Managed system SOL~JAVA does not fulfill the Diagnostics prerequisites

    Hi Experts,
    I am getting error error while doing manged System configuration in Solman through solman_setup.In step 2 during prerequisite check I am getting error "Managed system SOL~JAVA does not fulfil the Diagnostics prerequisites" for java and abap too. In LMDB I checked the Host assigned to this technical system.Please refer screen shot for the entry. Please suggest where I am committing  mistake.
    Thanks
    Aditya

    Thanks Karthik & Kamil,
    During SLD preparation in System Preparation phase I had updated the CR/CIM of SLD but I committed a mistake that I applied the CR (From 8.x to 9.0) and then (From 9.x to 9.y) without doing it sequentially from (1.x to 2.0) then from (2.x to 3.0) and so on as per 669669. It didn't give any error.As of now it is showing CIM1.6.38 and CR 9.13. Is my current problem related to this?
                                                                                                                                                    Current error message is saying (The definition of Technical System 'SOL~ABAP' is not correct: 'SOL~ABAP': Technical System must be installed onat least one Host.) similarly for Java (The definition of
    Technical System 'SOL~JAVA' is not correct: 'SOL~JAVA': Technical System must be installed on at least one Host.).In LMDB I can see in technical system Abap and Java has host assigned to it.Plz suggest.
    Thanks
    Aditya Roushan

  • Manager System does not fulfill the Diagnostics prerequisites

    Hi experts,
    I am in Solution Manager 7.1 SP11, step Managed Systems Configuration .The Managed system is one Java application server (Portal).
    In step 2: Check Prerequisites I am getting error:
    Managed system <SID>~JAVA does not fulfill the Diagnostics prerequisites
    ERROR->Cannot get Software Components installed on Solution Manager
    More info->Method call failed; the method GET_SC_67838200100200019681 of the class MANAGED_PREREQ_CHECK does not exist
    Action->Check the current SP Software Component list on SAP Service Marketplace: http://service.sap.com/sap/bc/bsp/spn/swdc/sps/default.htm?pvnr=01200314690900002795
    Check  Context->Managed systems prerequisite | Diagnostics prerequisite Java | SYSTEM =<SID>~JAVA
    detail
    No More Info for this problem!
    Who can give some advise to solve this ?
    Regards
    Leo

    Hi Leo
    Check this note & this should help this issue
    , 2001501 - Cannot get Software Components installed on Solution Manager
    Looks like known issue, ID 67838200100200019681 shows relevant.
    regards
    Swami

  • SCCM setup does not recognize the prerequisite components- Component Manifest

    I read previous topics.  The ansers referred to log files.
    I have read the log file.
    The error indicate the ConfigMgr.manifest.cab does not exist.
    Cannot find file anywhere.
    I am sure something is wrong.  Anyone please advise.

    hi,
    Could you try to download ConfigMgr.manifest.cab from following link and copy into specified download folder. And then try it again. It seems SCCM cannot find ConfigMgr.manifest.cab to download required updates.
    http://go.microsoft.com/fwlink/?LinkId=95663
    HTH.

  • InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in valu

    Hi Gurus,
    There is a query which is related to master data. While updating the infocube we are getting the error “InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in value 58240”, we have maintained the ref. integrity value 58240 in BW but still getting the same error message.
    Please help me out in this issue.

    Hi Bhanu Gupta,
    I have checked it in the SID Table of Product Group /BIC/SZPRODGRP it exists in the SID table, but when i try to look into the CUBE with the particular product group it says that it does not exist with that value.
    I have seen many of your replies which are quite knowledgeble.
    Please advise me soon what is to be done.

  • Installing ST-A/PI Addon : "OCS package SAPKITAB9L does not match the current software component vector"

    Dear Gurus,
    When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
    My downloads ;
    1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT  (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
    ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
    2 - SAPKITAB9K==> CSR0120031469_0081131.PAT  (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
    ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
    3 - SAPKITAB9L==> CSR0120031469_0076956.PAT   (ST-A/PI , 01Q_731 , Package Level=0002)
    ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
    I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
    What could be problem ?
    Here is system components ;
    SAP_BASIS
    740
    0005
    SAPKB74005
    SAP Basis Component
    SAP_ABA
    740
    0005
    SAPKA74005
    Cross-Application Component
    SAP_GWFND
    740
    0005
    SAPK-74005INSAPGWFND
    SAP Gateway Foundation 7.40
    SAP_UI
    740
    0006
    SAPK-74006INSAPUI
    User Interface Technology 7.40
    PI_BASIS
    740
    0005
    SAPK-74005INPIBASIS
    Basis Plug-In
    ST-PI
    2008_1_710
    0007
    SAPKITLRE7
    SAP Solution Tools Plug-In
    BI_CONT
    757
    0001
    SAPK-75701INBICONT
    Business Intelligence Content
    BI_CONT_XT
    757
    0001
    SAPK-75701INBICONTXT
    Business Intelligence Content for Bobj I
    SAP_BW
    740
    0005
    SAPKW74005
    SAP Business Warehouse
    CPMBPC
    801
    0005
    SAPK-80105INCPMBPC
    CPM Business Planning and Consolidation
    POASBC
    100_731
    0005
    SAPK-10205INPOASBC
    POA Shared Business Components

    in 000 client but now i am getting DUMP ;
    Category               ABAP Programming Error
    Runtime Errors         CALLBACK_REJECTED_BY_WHITELIST
    ABAP Program           SAPLSTPA
    Application Component  BC-CTS
    What happened?
        An RFC callback has been prevented due to no corresponding whitelist
        entry being configured. The original RFC called function module "RFC_TP" in
        the target system with destination "CALLTP_WindowsNT". The callback called
         function
        module "TRINT_PROGRESS_INDICATOR" in its own system.
    Error analysis
        Function module "RFC_TP" was called. This execute an RFC callback via ABAP
        statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
        . This action resulted in this ABAP short dump.
        This action was triggered explicitly by the application in transaction
        "SAINT               " and in ABAP main program "SAPLSAINT_UI".

  • Infoobject 0doc_number does not fulfill ref.integrity in record 1

    Hi BW Experts,
    I am facing an error in quality server "infoobject 0doc_number does not fulfill ref.integrity in record" while scheduling the infopackage. But it was working fine in development server.
    While scheduling the infopackage i have choosen the option "always update data if no master data exists for the data"
    Also tried with the "Do not update data if no master data exists for a characteristic"
    Can anyone help me with solution as this issue is critical for me.
    Points rewarded.

    Ganesh,
        I want to add one more point... i can't comment whether do we need to add the Referencial Integrety Check for Document Number .i.e 0DOC_NUMBER.
    One thing i want to say is that It is mainly for BW integrated with Flat Files, DB Connect etc. also for SAP Systems if any conversion routine exists. Other wise SAP Systems will provide correct Data. If other non-SAP Systems connected to BW, it's better to add that Check. That will put some extra check while loading data. still it is good practice.
    1. Try with Option Load Data without Master data.
    2. if above option won't work, try load Master Data first. It will create SID for New Documents. then load the Transactional Data.
    I think you already tried 1st option. you didn't tried 2nd option.
    Let me know how it goes.
    Regards,
    Nagesh Ganisetti.
    *Keep Update the Status that will help us.

  • OCS package SAPKITL437 does not match the current software component vector

    I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
    Lalit Kumar

    I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
    Lalit Kumar

  • Err : crm :- nfoObject 0CRMCC_CAT does not fulfill ref. integrity

    Hi all,
    when i  tried to load the data from crm to bi i am geeting the error as
    InfoObject 0CRMCC_CAT does not fulfill ref. integrity in record 4 in value DDCE7E1500654BF1A798005056A53FFA
    but i already checked the refrence integrity check box.
    please help me on this issue
    Regards,
    siva.

    hi  Ajeet,
    thanks for ur valuable reply ..I can able to see only one checkbox related to Referenical intergrity in the Infosource.
    Can you pls help where are the two places we can able to see Referenical intergrity Options.
    Pls suggest.
    Thanks,
    Siva.

  • Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record

    Hi every body
    I Triggered a load and the load failed giving the error  'Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record 799 in value 0599 '.
    Can anybody explain me clearly the meaning of the error.
    Thanks&Regards
    Raghavendra Reddy Bijevemula

    Hi,
    Check whether the value has maintained in the SID table for the info object YEKEYBRND thru BIC/SYEKETBRAND..
    if it exixts the u have to repair ur infoobject in the RSRV.
    Check the link..
    http://help.sap.com/saphelp_bw31/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
    Re: Referential Integrity check
    Regards-
    MM
    Assign points if it helps
    Message was edited by: vishnuC
    Message was edited by: vishnuC
    Message was edited by: vishnuC

  • InfoObject 0DOC_NUMBER does not fulfill ref. integrity in record

    Hi
    I am getting this error
    InfoObject 0DOC_NUMBER does not fulfill ref. integrity in record
    Please help me resolve this issue.
    Thanks,
    Amit

    Hi Amit,
    I think in the infopackage u will have setting load data eventhough no master data exist.This will help u to fix the data load.During Transaction data  loading usefully the Referential will be checked if u have enabled the option in infopackage.
    U have Two Solution to this issue :
    one to load the master data before transaction data
    another one u can set in infopackage load data eventhogh no master data Exist in the infopackage.
    Assign points if this is useful
    regards
    Arun

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Any idea what this errorr means? the data type of the reference does not match the data type of the variable

    I am using Veristand 2014, Scan Engine and EtherCat Custom Device.  I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.  
    I created a new Veristand project
    I added the Scan Engine and EtherCat custom device.
    I changed the IP address and auto-detected my modules
    i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
     So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
    Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
    Any thoughts?
    Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Preparing to synchronize with targets...
    • Querying the active System Definition file from the targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.
    • Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Preparing to deploy the System Definition to the targets...
    • Compiling the System Definition file...
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Sending reset command to all targets...
    • Preparing to deploy files to the targets...
    • Starting download for target Controller...
    • Opening FTP session to IP 10.12.0.48...
    • Processing Action on Deploy VIs...
    • Setting target scan rate to 10000 (uSec)... Done.
    • Gathering target dependency files...
    • Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
    • Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
    • Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
    • Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
    • Closing FTP session...
    • Files successfully deployed to the targets.
    • Starting deployment group 1...
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details:
    Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    LabVIEW: The data type of the reference does not match the data type of the variable.
    =========================
    NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    • Sending reset command to all targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.

    Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef?  I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).  
    Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
    You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671  
    Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
    Kevin W.
    Applications Engineer
    National Instruments

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

    I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

Maybe you are looking for

  • Cost Analysis Issue

    Dear friends, We are maintaining the Material cost, Maintenance cost everything in INR. So, when the Internal Material cost for any PM order is taken the INR is displayed. But now if I need the report of all the Internal Costs or any costs in general

  • When in chat rooms the systen times me out after 5 minutes, says it caused by inactivity. can this be changed?

    system times me out after being in room after 5 minutes, says it is because of inactivity. can this please be changed? thanks

  • 1.3 save as preflight problem

    in acrobat, when we do a save as 1.3 preflight check (we do this to flatten transparencies among other things) acrobat ask you to save the new document and after this it does the preflight action. We then open the new 1.3 document and the new documen

  • HT201317 Shared photo stream

    Hi all, Can subscribers add photos to a shared photo stream? Thanks

  • Simple  Fact Calculation Help

    Hi Team I need help in creating a simple fact calculation. I need to create a fact column that should give the lastest transaction amount , if the type of the transacion is "DEBIT". for example if there 100 transactions are there, and out of that onl