SolMan 7.1 SP10: Managed Systems Configuration: client 000 OK, client 100 error

Hello,
after installing SolMan 7.1 SP10 successfully I also completed the steps "System Preparation" and "Basic Configuration".
Now I'm connecting the managed ABAP systems to the Solution Manager by performing step "Managed Systems Configuration".
After several other ABAP systems I'm now connecting our productive CRM 7.0 EHP1 system "CM3" (SAP_BASIS 702).
I also connected the CRM development and CRM quality assurance system without a problem.
For client 000 everything worked fine, the RFC destinations were created and a green light is shown.
Now the problem is to connect the productive client 100:
The log for Activity RFC Connection says:
The corresponding dev_rfc tracefile says:
**** Trace file opened at 20140326 164911 W. Europe Standard Time, by disp+work
**** Versions SAP-REL 720,0,523 RFC-VER U 3 1468763 MT-SL
======> Name oder Kennwort ist nicht korrekt (Wiederholen Sie die Anmeldung)
ABAP Programm: SAPLSM_SETUP_API (Transaction: )
Called function module: FUNCTION_EXISTS
User: SOLMAN_ADMIN (Client: 001)
Destination: 0050568713C71ED3AD9FC4F78AC9D9EB (Handle: 16, DtConId: 27FEB4E356BCF14F99EB0050568713C7, DtConCnt: 1, ConvId: 64734943,{27FEB4E3-56BC-F14F-99EB-0050568713C7})
EPP RootContextId: 0050568713C71ED3AD9FB7AD4C4859EB, ConnectionId: 0050568713C71ED3AD9FB784232C59EB, ConnectionCnt: 1
EPP TransactionId: BDFDB4E3626AF14899EB0050568713C7
But both users taken to execute this step (SAP Solution Manager Administrator "SOLMAN_ADMIN" and Managed System Configuration User "SM_ADMIN_SM3") exist and have the correct provided password.
Does anyone have a clue?
Kind regards
Rüdiger Höckel

Hello Ranjith,
thanks for your quick response.
The ST-A/PI software component is the same on all systems: 01Q_700 #2.
SolMan system: SM3
CRM systems: CM0 (ok), CM1 (ok), CM3 (problem with client 100, client 000 OK).
I also tried the recommendation found in the SAP Community Network
(http://scn.sap.com/thread/3483642) but this didn't help either:
1.Delete system from LMDB.
2.Delete system from SLD of solman.
3.Re- register the system to SLD of solman(rz70 for AS ABAP)
[the LMDB synchronizes with the SLD every 10 minutes, system CM3 is visible again in the LMDB]
4.Now follow the steps in managed system configuration.
The wizard worked fine for client 000 but throws this error for client 100.
I use all the latest installation and configuration guides.
For this step I'm using the guide "Managed System Configuration" that is available in the SOLMAN_SETUP wiki.
https://websmp206.sap-ag.de/~sapidb/011000358700001120342013E.pdf
Kind regards
Rüdiger
P.S. In total I have already connected eight systems (SAP_BASIS 700 to 731) but this is the first system that gives an error.

Similar Messages

Managed System Configuration Error for MDM 7.1 SP09

Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note 1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.

Dear ,
Haseeb,
I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
1940337 - RCA template for Solution Manager 7.10 SP10
This note should resolve your problem. This note has the updated template for MDM.
It did for mine
Thanks
Amit

Syntax error in program CL_AC_METRIC_REPOSITORY=======CP When going to managed system configuration in solman 7.1

Dear SAP Gurus,
Good Morning.
I'm getting error in managed system configuration in solman 7.1. Error is like
The system preparation and Basic configuration in working fine, but when we are going to click the managed system configuration Error getting like this.
Solution Manager Version : 7.1
SP Level : SP5
Thanks in Advance.
Regrads,
Kumar BN

Hello Kumar,
I would suggest moving this discussion to this space in SCN: http://scn.sap.com/community/it-management/alm/solution-manager
That will help get you a quicker response.
Thank you,
Kristen

Managed System configuration in Solman 7.1 sp11??

Hi All,
I have done new installation of solman 7.1 and upgraded to sp11.
I did system preparation and basis configuration in solman_setup.
I have one query how to add ERP production system to SLD and how to do managed system configuration for that.
I want to add ERP Production system and Managed configuration for that and MOPZ,EWA configuration ERP Production system.
Please help me in this...
Here i attached screen shot for your reference.
Presently in managed system Only Solman system is visible.
Thank in Advance
Chandra

Hi,
Please chekc th ebelow guide
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://websmp104.sap-ag.de/~iron/fm/011000358700000209862011E/012002523100005267752014WRK2?TMP=1407918324257#bkm_show1_…
go to Configuration of SAP Solution Manager
Normally y this demo and guide will be available http://service.sap.com/rkt-solman
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Normally after addition in SLD ,system will adding the system in LMDB ,then added in smsy automatically. check the Job LMDB*
Update the CR content in SLD , check th below note fpor the smae.
Note 669669 - Updating the SAP Component Repository in the SLD
LMDB FQA:
Landscape Management Database (LMDB) – FAQ
Product system Editor in LMDB:
New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki
Rg,
Karthik

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

SQL Error 0 during DBACockpit setup in Managed System Configuration

Hi All,
I'm getting SQL Error 0 during DBA Cockpit setup in Managed system configuration. I'm trying to connect MsSQL 2005 from Linux system(Solution Manager 7.1 SP10). I have installed necessary ODBC and microsoft drivers. Any suggestions will be appreciated.
Regards,
Pragadees

If I've understood you correctly, you are trying to setup a remote database connection from an SAP Solution Manager system running on Linux with a database which is NOT MSSQL to a database which is MSSQL running on Windows.
In that case have you checked these SAP notes ?
1265134 - DBA Cockpit: Connecting a remote database
1388700 - SolMan 7.0 EHP1 Database Warehouse for MSSQL
Regards
RB

MAnaged system configuration error in solution manager

Hi,
While doing managed system configuration getting the error, below versions are using.
MDM 7.1 SP10 Import server and Solution manager 7.1 SP10.
Can anyone help me?.
Regards
Chandra

Two cases you have
1) Satellite system
Re-install The DIA agent and give correct (port numbers )SLD details
Once you re-install the DIA agent, run Rz70 from satellite system
data will pull from satellite system to central SLD.
2)Run SLD check from Solman system , check its successful or not
Go to LMDB and check satellite system
After re-Synchronize technical system from SLD
Thanks ,
Rahul yedapally

Plug-in status not performed in Managed system configuration

Dear Experts,
I had configured Managed system configuration in SolMan 7.1 SP10. I could find plug-in status " not performed" (grey) in solman_setup screen . Below screenshot for your reference. I had highlighted the plug-in status in blue for easy recognition. Please provide your valuable inputs.
Thanks,
Phani.

Hi Phani,
It is an open issue, pls see below; you might have to hang on till SP12 is available.
1954303 - The Plug-in Status (ST-A/PI) Grey for Managed System In Solution Manager SP10 and SP11.
A fix for this issue is planned for SP12, please note that this is subject to change
Regards,
Vivek

Error in Managed system configuration.

Hi Folks,
In Solman 7.1 i am configuring my Java system in managed system configuration on the last phase of configuration which is "Check Configuration" i got the below error...
Can any one guide me on this....
I installed the Diagnostic agent as well as willy inter scope.
Regards,
Anil.

check the note which describes your problem
1776959 - Solution Manager 7.1 Manged System configuration. Error: Timezone from managed system could not be retrieved: Timezone of J2EE Engine (GMT+01:00) does not match the timezone of the diagnostics agent (Europe/Berlin)
Resolution
Open the instance.properties file of the J2EE Engine on the managed system
Locate the parameter "-Duser.timezone=" and its value
If the -Duser.timezone is not set the JVM uses GMT
Set the -Duser.timezone parameter in the JVM of the SMD Agent. If there was no "-Duser.timezone in the J2EE's instance.properties file use the timezone that was indicated in the error message e.g. GMT+01:00 (from the above error message, this might differ on your environment) To do this:
Locate the smd.properties file (for newer agents the files is called: smdagent.properties)
The path is: .../usr/sap/<DiagnosticAgentSID>/SMDA<SYSNumber>/SMDAgent/smdagent.properties
The -Duser.timezone= parameter of the Diagnostics Agent and the SAP J2EE engine need to be set to the same timezone. That means the string needs to be the same for both parameters
e.g.
If the -Duser.timezone= parameter of the J2EE engine is set to -Duser.timezone="GMT+01:00"
set the Diagnostics Agent parameter to:
smdagent.javaParameters=-DP4ClassLoad=P4Connection -Xmx256m -Xms256m -Duser.timezone="GMT+01:00"
Restart the Agent
Re-run the "Configuration Check" in the "Managed System Configuration"
Please make sure that the time zone configuration is correct according to the SAP recommendations: http://wiki.sdn.sap.com/wiki/display/Basis/Timezone+changes+best+practices

Software Prerequisites in managed system configuration are not fulfilled

Hello dear Forum,
I'm facing a problem when I configure a PI system in managed system configuration. I register the Netweaver PI AS ABAP technical system to solman's SLD directly(run RZ70), and collect the information of the Netweaver PI AS JAVA from the PI's sld. I don't know whether it matters.
The following error occurs when I Check Prerequisites:
J2EE-FRMW does not fulfill the prerequisites (installed: 7.11 SP0, expected: 7.11 SP001)
But I don't know how to find J2EE-FRMW 7.11 SP001 and do some update, please give me some advice.
Best regards and thanks for your help,
Pany

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

Warnings in Managed System Configuration

Dear all,
We are in the process of connecting a satellite system to Solman 7.1 and to monitor its datas.
So in Managed system configuration for system, we are facing some warnings in step 8 and step 11.
In step 8(Configure Automatically),Generate System level metrics ended with a warning i.e "The Diagnostic Agent for Introscope Enterprise manager could not be found"
In step 11,(Configuration),Configuration check ended with warnings.
i.e Errors found during the last 20 run for extractor
Kindly suggest on how to proceed further.
Thanks,
Regards,
Hasan

Hello Diego,
Sorry for the late reply..
Yea the Enterprise Manager is running.
When i tried the URL which you had given, it is displaying as 404 not found.
Also when i start the Diagnostic agent in the SOLMAN, it is getting started and it is showing green LED in MMC, but when I try to connect the Diagnostic Agent to Solman in Basic configuration step, it is turning yellow and displays as,
""Access denied by the Managing System
Check username/password
Managing System details:
host hllsap12
port 8103
Last operational status 272"
After this the Diagnostic agent turns to yellow in MMC also..
Kindly advice,
Thank You,
Regards,
Hasan

Managed system Configuration Diagnostics Prerequisites check fail

Dear All,
My solman_setup initial configuration part and basic configuration part all passed without error. And when I do the managed system configuration part , first I choose the solution manager itself and the client 001 to config , and then the maintain connection passed OK , but in the next step , check Prerequisites, it fails. The Navigation Button just open a link to the SAP Service Market Place, and the IMG documentation just let me to see the note 1010428. The deatl part of the execuation result of the Prerequisites open a page but with error statement as below :
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any comment will be appreciated.
Enddy.

Hello Enddy,
This sounds as if you have yet to configure the HTTP services in SPRO or have misconfigured them. Please review your configuration for the HTTP Services as it should resolve your issue.
Please review the diagnostics URL to see if it helps you out:
http://service.sap.com/diagnostics
Also, please review the following SAP Notes which will also guide you through diagnostics and solution manager setup/installation:
1010428 End-to-End Diagnostics
1145779 SAP Solution Manager 7.0 Installation
1163836 Solution Manager Diagnostics required for troubleshooting
Also pay attention to the relevant notes listed on the bottom of these. If you follow these documents, I'm sure you will have your issue resolved.
Hope this helps you out!
Thanks,
Mark

Managed system configuration step 8: No Admin User Id provided for TS SID

Hello experts,
I face the following problem in step 8 of managed system configuration (Configure automatically, SolMan 7.1 SPS 3):
All Activities fail (except Activate services) with the following Details message:
No Admin User Id provided for TS <SID> (ABAP)
Any hint?
Thanks and best regards, Basti

Hi Sunny,
I don't find anything where I can provide the user information. It just uses the actual user (SOLMAN_ADMIN). Can you tell me where to provide the user for this step?
Managed system configuration -> step 8 Configure automatically -> SSO Setup
Thank you, Basti

SolMan 7.1 SP10: Managed Systems Configuration: client 000 OK, client 100 error

Similar Messages

Maybe you are looking for