Solman and AccessDB

Hello Team
Currently we are using AccessDB to maintain contact details of Jobs in SAP environment.
Could you please let us know if AccessDB can be migrated to solution manager and if yes please guide me to the place where more details can be found
.Also to waht other platforms AccessDB can be migrated to other that sharepoint.

> Any note on using the zones/LDoms? If not, then I can go with normal installation.
1178190 - SAP on Sun LDOMs
870652 - Installation of SAP in a Solaris 10 zone
Those notes don't explain how to set up the LDom or the zone, they explain that it's possible to do so. Those are operating system tasks, consult http://docs.sun.com.
> Also one technicallity? the solman installation, I have not updated the oracle patch to 2.0( at present 10.2.0.1.0). bcos it never asked for the patch installation. So while ecc installation, I think the installation ask's for the patch cd? right??
No.
10.2.0.1 is NOT supported, I wonder why you were able to install SolMan. Read the installation guide, it tells you to
- install Oracle when requested by sapinst
- install the latest patchset (which is 10.2.0.4)
- install the latest interim patches (as of now ~ 28)
and THEN continue with sapinst.
The same is true for ERP 6.0 installation. Sapinst will not ask for a database patch CD.
Markus

Similar Messages

What are the roles/profiles required in solman and satilite system.....

Hi All,
What are the list of roles/profiles (for SOLMAN and Satellite system) required to create logical instance etc... for monitoring and tasks.
Regards.
kumar

Hello Kumar,
please have a look at the Configuration Guide for SolMan on the SAP Marketplace. ALso for information on required documentation, see SAP Note 1088980.
Best regards,
Annett

Connect Solman and third party system

What kind of RFC destination do I need to create in order to connect with Aris, I've already created TCP/IP connection but the test failed and throw an error:
Return code: 242
Location: SAp gateway on host/service
Detail: No connect of TP from host xxxx after 20 sec
I created a blue print in Solman and I can see it in Aris but it´s impossible to synchronize them Aris shows "Model type SAP allocation diagram is not allowed in the current filter" I think it's because the RFC connection doesn´t work
Can you give some advice, thanks!!

Hi Sankaranarayanan,
The details about TDMS is available at the following links
SAP Test Data Migration Server
Please go through the following web sites.
http://service.sap.com/instguides and http://service.sap.com/slo
https://websmp207.sap-ag.de/customdev-tdms
Regards,
Srila.

Is it possible to install Solman and ERP on the single Host

Hi,
I want to install Solution Manager 4.0 and ERP ECC 6.0 on a single Server.
So is it possible to choose the System-ID e.g. "XA0" for Solman4.0 and "XA1" for ERP ECC 6.0.
Firstly, do I need to demand two Installationnumber, one for SOLMAN and the other for ERP.
Secondly, how should I deal with the Systemnumber should I choose 00 for java and 01 for ABAP and which number should I choose for ERP.
Finally, how is it possible to access to the two system with only one server, naturally using the SAP Logon. Do the Systemnumber has a real impact on that.
Please, send me a respond as clearly as possible. I will be thankful for that.
Ps. I installed the two systems before, but unfortunately I used the instancenumber 00 for ERP. The impact on that, that I wasn't able to access Solman anyway. I used the same System-ID for Solman and ERP, does it really matter?
Regards,
Kais

Hi Kias
1. Yes
2. Depending on if you are highly available you may need more system numbers - for example there are SCS and ASCS components. I would recommend installing 10 apart (system 00 and system 10). It makes little different which number is which.
3. Yes, system number relates to something called ports. ports are used to listen for incoming traffic of that type. (I listen on port 3200 for the ECC system GUI traffic, I listen on 3310 for the solman RFC traffic).
If you are in the same local network as the segment you will be able to access all ports on a server, but if through a firewall or various other part of the network you are likely to need to request a few ports to be opened.
You cannot have different systems on the same number due to on one executable (not just SAP) can use a port at a time.and also such local thing like shared memory would not make this feasable.
As you installed two systems on the same system number you can start either one successfully, as long as the other is stopped at the time.
I hope this help
regards
Graham Newport

SolMan and SNMP traps?

Hi experts,
I'm searching some information about the possebilities with SolMan and SNMP traps.
I know that it is possible to send SNMP traps from SolMan to e.g. an external monitoring tool, to send alert information (CCMS/RZ20) to this monitoring tool.
But is it possibel to recieve SNMP traps in SolMan and e.g. create Service Desk tickets out of them?
Thanks
Thomas

Thomas,
Can you please share your experience about sending SNMP traps to solution manager? I am trying to find information on how to configure Solution Manager for receiving the SNMP traps. Please guide me on this.
Thanks
DG

Solman and JDI !!!

Hi All,
<b>Solution Manager:</b>The SAP Solution Manager supports you throughout the entire lifecycle of your solutions, from the Business Blueprint thru configuration to production operation. It provides central access to tools methods and preconfigured content, that you can use during the evaluation, implementation, and productive operation of your systems.
whereas
<b>Java Development Infrastructure:</b>SAP NetWeaver Java Development Infrastructure (also named Development Infrastructure). It enhances the concept of an IDE by server-side services, which centrally provides the development teams with a consistent development environment and supports the software development during the entire life cycle of a product(Dev->QA->Prod).
can we correlate and establish a linkage between
Solman and JDI if so what points we you will consider.
Your inputs will be highly appreciated....
Regards,
RK

Hi Venkat,
good question.
Short answer is: the Solution Manager is a tool to ORGANIZE changes in a System Landscape, the NWDI is the tool to PERFORM the task for Java Development.
So both tools are meant for the same task, but on different layers. The Solution Manager uses the NWDI to perform Java Development and Modification. Besides, the Solution Manager is using a few more tools to perform the tasks, that are described by it (e.g. Software Lifecycle Manager, TMS, ...).
Have a look at the <a href="https://websmp206.sap-ag.de/instguidesnw2004s">Installation Guides for NW2004s</a> --> Installation
Best regards,
Timo

Difference between SOLMAN and ASAP Project Selector

How different is SOLMAN from ASAP Project Selector as far as roadmaps for standard SAP Implementation methodologies are concerned? Does SOLMAN consist of questionnaires like is the case with ASAP Project Selector?

Hi Namrata
1. How different is SOLMAN from ASAP Project Selector as far as roadmaps for standard SAP Implementation methodologies are concerned?
A. The SOLMAN is a different tool altogether. it is an enhancement to the ASAP Methodology for the latest versions of SAP. In SOLMAN we will select the required business and its processes supplied by the SAP. Whereas we need to change the necessary modifications to the required objects and do the enhancements to the default configurations. In SOLMAN we need to define the landscape very initially. If a project is implementing with SOLMAN, then each and every request should be routed through SOLMAN and stored in SOLMAN and also each and every requirement as well as all BPP should be kept in SOLMAN. And configuration will also be done from SOLMAN itself, whereas earlier in ASAP methodology this doesn't exist.
2. Does SOLMAN consist of questionnaires like is the case with ASAP Project Selector?
A. SOLMAN will not consist any questionnaires like in ASAP project selector. It is an extension to the ASAP methodology. for preparing the as is study we need to follow the ASAP methodology, and for preparing the blueprint and configuration, we will use the SOLMAN.

Configuration in Solman and Satellite system for Support message creation ?

Hi ,
I want to send a support message to solman from the ( help menu -> create support message )
of my satellite system.
any one tell me the settings that i have to make in both the sattelite system and the solman for sending a support message.

Hi,
the necessary steps are described in Solution Manager IMG documentation.
Also you can find that information in the web blogs in this forum.
In a nutshell:
- activate Service Desk in Solution Manager (incl. BC-Sets)
- maintain System Landscape, RFCs and iBase
- create key users (business partners)
- maintain number ranges
- assign roles
- maintain table BCOS_CUST in satellite system
You should just follow the corresponding customizing steps in tx: SPRO.
/cheers

Word 2000 with SolMan and EWA issues

Hi,
Having a number of issues. It seems since updating SolMan to SP24 EHP1 i cannot open EWA reports in Word 2000 (updating to latest version is out of the question due to business politics). I have tried a number recomendations from OSS notes but none work. I get this error message when i select standard or short version
Required file not found -> see long text
Message no. DSVAS813
No usable file was found for the active Office version in the report defintion.
Procedure
Processing cannot continue.
Please notify the person responsible for this session type or for the SAP Solution Manager, specifying the session number, session group, session type, version number and the number of the message short text.
To find session information, in the Service Session Workbench, choose Goto -> Technical Information. Specify the Office application and version (which you can find by choosing ? -> Help -> About... ) and the number of the message short text.
To create a message to SAP, choose Help -> Create Support Message.
The issue can be resolved by changing the report definition in the Service Session Workbench or importing a newer version of the session definition.
I am not sure how to change the Word version in technical Information, it seems not so "helpful" help page and how to change the report definition. Any help on this would be appreciated
I also needed to know how to send previous SAP EWA reports. The landscape is setup to send the EWA reports to SAP on a monthly basis and i need to change this to weekly. i have had a look at the EWA setup operations and it is active and all boxes are ticked.
thanks,
Mani

Hello Mani,
You can send the data for ABAP system to SAP and process the EWA reports and they can be accessed via your
Service Market Place inbox, if that was an option you were seeking. How to do so, you need to follow SAP Note 207223.
The periodic SDCCN EWA task can be scheduled to recurr weekly.
EWA data on Satellite ssytems is usually only available for the past 3 weeks, as there is no intent to store the data.
Of course any EWA report can also be opened (click the link on the left side in DSWP) in HTML, so this could be a work around to get any existing or furture EWA reports generated on your Solution Manager system.
Unfortunately, because Word 2000 is no longer supported by Microsoft, there is little that can be done now, that you are on Word 2000, and have upgraded to an SP level that no longer supports Word 2000. This is your issue.
However I think I have provided some alternatives to get the reports.
Regards,
Paul

How to fetch data from SolMan and move it into SAP BI?

Hi all,
I have the portal activity report data residing in the SolMan ( achieved by configuring portal and SolMan). I need to extract this data from Solution Manager into SAP BI, such that i can report on the data in SAP BI using the BEx tools. How will i proceed with it ? Your response is higly appreciated.
Regards,
Divya.

Hello Divya,
You must set up E2E Diagnostics for the managed system (portal system).
You can accomplish this by running transaction solman_setup in the Sollution Manager and ensure that Initial and Basic Configurations are performed. Afterwards, you must follow the Managed System Configuration (also in solman_setup) for the managed system.
Afterwards you must activate some specific Portal Activity Data Collectors following the note 1309740.
Best regards,
Guilherme Balbinot

SolMan and Dev client

Hello!
We are in the configuration phase now using SM4.0. Our SolMan-Prod is connected to the Dev client (Golden client) as target. The team is configuring using solar02 and accessing the IMG and completing the configuration document. Some team members access the Dev client directly and complete the configuration, My question is,
How do I restrict access to the Dev client directly by the team members?
The team members should have access to the Dev-IMG thro' SolMan only and not directly. That way there is better control in the configuration phase.
Appreciate any inputs.
Thanks.
Mike

Hi Mike,
I have heared colleagues saying that it can be achieved by restricting access to SPRO in the DEV system.
But the RFC connection b/n SolMan & the Dev system should have full access.
Let me know whether it helps.
best regds,
Alagammai.

SolMan and multiple SAP customers

As a consultant, I'm in the middle of installing and configuring SolMan 4.0 for a client. This client is currently running many SAP systems as they have gone through a couple mergers over the past few months/years. As a result, they have multiple SAP Customer numbers.
Now when you enter the Global Settings for the system you only have the option of ONE "S" id which of course is associated with ONE customer. As a result certain functions, like Maintaining Service Connections, sychronizing data with the Support Portal and other things don't work correctly.
Is there any any way around this limitation? The customer is working with SAP to merge the contracts, and hence get all systems under one customer, but due to contact jurisdicational issues this could take a while
What I need is either a way to put multiple "S" ids under the Global Settings (and of course have the system try them all until the function works) or be able to associate ONE "S" id with multiple customers. Is this possible?
Thanks.

Hi Murray,
currently the only way is to merge contracts under one group key as the customer does. We plan a functionality within Solution Manager to solve this problem also for customers that do not belong to the same group but there is no definite schedule for this. Sorry I can give you no other answer.
Regards
Andreas

Average Response Time Different in SLR/EWA (in solman) and ST03 (in satelli

Hi All,
We find that the average dialog response time shown in SLR and EWA reports of Solman is much lower (250 ms) whereas the dialog response time shown in ST03 transaction of the system (XI instance) is high 2000 ms.
Which one is correct and how can I correlate these two values if both are right in their own way.
regards

Hello,
The data source is ST03, therefore unless there is an issue with the collectors, you should assume the ST03 data is correct.
Pleae run RTCCTOOL on the managed system and ensure ST-PI and ST-A/PI are current.. Also make sure your SAPOSCOL is current.
There is a possibility that there was an error during preparing the transport to send the data back to Solution Manager, so scan the SDCCN task logs for any errors/warnings on the managed system. You can also check the transport to see what vaues are being returned to Solman's service session. If the have the same value as ST03 at this point, then there is an issue witht eh EWA/SLR provcessing. If the data is not the same here as ST03 then there was an issue with the SDCCN tasks.
If the data collection is not at issue and the transfering of that data to Solution Manager service session had no errors, then Please follow Jared's recommendation, as this would then be an issue processing the service sessions, and this could be due to outstanding Service Content updates. This can be checked with transaction code AGS_UPDATE.
Regards,
Paul

Solman and Content Server

Hi Gurus,
There is demand on my project to configure Content Server with Solman. My stance is that , why we need Content server or KW , if Solman already has the capability of storing documents ( road map and project documents-BBPs stc.) in its own repository.
Is my stance sound Ok, if yes then is there ia any way we can see the contents of thses folders?
waithing...point swill be awarded for any help

Hi,
you do not NEED a content server in conjunction with Sol Man to store documents. But you CAN make use of one if thats your requirement.
Maybe you expect a large appearance of documents and want to keep the Sol Man Database small. Maybe the company is already using a content server for storing other kind of documents.
Sol Man got the capability to store documents internally (/KWCUST/) so it's not a must to use a content server.
/cheers

Config through SolMan and lock SPRO on ECC?

Hi all,
My client wants to use SolMan 7.1 for all configuration and lock SPRO on ECC systems.
1) Is it possible to lock SPRO completely at ECC side and enforce everyone to use SolMan for configuration?
2) In what cases we need to open SPRO at ECC?
Someone from my project was mentioning that some custom configuration or special settings needs to be done in ECC and for that have to logon ECC system and use SPRO. Is that true?
Thanks for looking this problem. Any suggestions or comments will be helpful and appreciated!
Regards,
Shaun

Hi
You might check this thread too for how to lock spro
How disable SPRO from Sap_new and Sap_All profile
if all the users have documented the config elements in solar02 of solman then only it is possible for you to lock spro of satellite system.
because if they want to config anything which is not there it wil be a problem
secondly if they say smthng is not there in solar02 they can try manual addition in solar02 and then you can lock spro in satellite
hope above helps
regards
prakhar

Solman and AccessDB

Similar Messages

Maybe you are looking for