SolMan ChaRM - System landscape not ready yet

Hi all,
We are configuring ChaRM for an implementation use, therefore all the systems are not set up yet.
Is it possible in SolMan to define logical component without "real" systems ?
We saw that in STMS it was possible to create virtual systems, but how do we link these virtual systems to SolMan ChaRM ?
Is it possible to define a virtual system landscape and to build and configure ChaRM scenario with this ?
Thanks a lot for all your help,
Regards.

Yes, it is possible to define a development system and virtual systems (Q- and P-System).
Via transaction SMSY you can describe the planned Q- and P-System at first as 'virtual'.
Create transport routes with transport buffers as you would do for existing systems.
Define the buffers as they should be named in future.
For experimental purposes we connected our IDES-System to our development SolMan system.
In this environment we could map such a ChaRM-configuration.
In the meantime we practiced it in our production SolMan system, too.
Best regards
Horst

Similar Messages

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

Storage messages not ready yett

i can not get my messages up on my mobile it just says message storage not ready yet, can i fix it thu my lapyop if i plug my mobile to it and if so how do it do it thanks

Hi,
I think that happens mostly in Nokia phones..You can try by connecting your phone to the computer and then installing Nokia PC Suite. From PC suite try to delete the unwanted messsages..
That is just one of the solution..Here is a link from Nokia that will give you few more tips..
message storage not ready yet
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

C220M3 LSI Storaged Raid Subsystem not ready yet 9271-8i

New C220M3 with 9271-8i out of box with 2.0.1b firmware
Control H doesn't boot into WebBios, instead I get EFI Shell with map:cannot find required map name.
Press ESC in 1 seconds to skip startup.nsh, any other key to continue
From the CIMC I select 2 drives to create a drive group and it fails with message;
Error: Storage Raid subsystem not ready yet
See screenshot;

Make sure the optionROM for the raid controller is enable in the bios.
1)Reboot server
2)Press F2 when you see the option to go into bios
3)go to advance
4)select the last option here I believe it is LOM and PCIe
5) verify that in slot 2 the optionROM is loaded

I TRIED TO ACTUALIZE MY SOFTWARE, BUT THE RESTORE SYSTEM HAS MORE THAN 36 HOURS AND IT IS NOT READY YET.... IT SEEMS STOPPED. BUT IA CANNOT RETRY, 'CAUSE IT WILL BEGIN AGAIN FRO THE START..... WHAT CAN I DO TO RESTORE CORRECTLY?

my ipad 2, is not restoring from the last setup.... it is taking more than 36 hours and is not ready, is not finished yet....it seems like stopped... But it is not getting any progress. What I must do to restore and start up again?
Thanks
ALEXCG

If the restore has stopped on the iPad then try putting it into recovery mode : http://support.apple.com/kb/ht4097

"the system is not ready"

hi
i working in web project and and no error in compilation but once the project
running get this message:
07/03/08 00:20:42 Error initializing server: IO Error: The device is not ready
07/03/08 00:20:42 Fatal error: server exiting
Process exited with exit code 1.
i don't know the problem in RAM or hard drive or what
but i have 1GB RAM and good free space
please , can any body help me?
thanks

Frank
............ welcom and thankyou, I'm sory for late
infact i dont try another unzipining JDeveloper
but every project i try to run same error
i will try new unzipping and comeback again
thankyou Frank again

Epson scanning very slow - Universal binaries not ready yet...

I just bought a iMac Dual Core to replace my G4 iMac 1.25Ghz. Both have 2gb of RAM. I am scanning my own art work to place on the web and to send by email.
It turns out that scanning with my Epson scanner is not a bit faster. I just replaced the scanner in January with the latest model.
After contacting Epson support, it turns out that no universal binary drivers are available and the current version is extremely slow...
I just want to say that I find this extremely disappointing, there are a so many Epson scanners out there, and than this....
And Epson can't / doesn't want to say when this will be fixed...
Thank you for contacting the Epson Connection.
We are currently testing new drivers for the Intel Duo Core System Macs.
Once the testing is complete, new drivers will be posted on the applicable Epson Support web-sites. Due to the complexity of this process, we cannot promise an exact date for availability. Please check the Epson Support web-sites for any new driver postings at support.epson.com.
iMac Dual Core Intel Mac OS X (10.4.5) 2gb memory

I found Universal Binaries for my Epson Multifunction CX6600
so check out frequently ...
Thierry

Timeout parameter in SolMan-ChaRM

Hi,
I need to know the parameter which decides the timeout for tcode SM_CRM in SolMan 7.1
the ABAP gui closes after about 5 mins of inactivity whereas the web browser of tcode SM_CRM remains open for long time(about 1 hour)
What are the parameters which decide these timeouts for both ABAP gui as well as web browser in SolMan Charm System.
The reason behind the need to know this is the java threads in our systems are all getting consumed resulting in JAVA stack getting crashed.
We suspect the SM_CRM is the culprit as it remains open for long time and this tcode is being used widely in our project.
OS : AIX
DB : oracle
-Ujjwal

Assuming you are talking about the timeout value for the web interface, it is in the {installdir}/ocas/conf/ocwc.conf file. The parameter you want to change is ssn_timeout. I believe you will need to restart ocas to make it effective.

Logon to system is not working in ChaRM solman 7.1sp2

Hello,
I have configured Urgent change in solman 7.1sp2 version.
Logon to system is not working in Landscape bar.
Please help on this.
Regards,
Karthik

No authorization issue. Using the RFC's i am able to logon to satellite system.
In Solman 7.1 ChaRM , Creation of Request for Change(Rfc) in CRM Web Client UI Interface.
So they removed Logon action in SMHF, added in Landscape Block in portal page.
Both Logon to system(Landscape Block) and Maintenance cycle (Related Transcation block) not able to open.
It doesn't show any error in trace.
I have created the SAP ticket for the same.
Rg,
Karthik

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

System landscape changes after activating charm

I need to change the system landscape on a maintenance project. I need to add an additional QA client to the project landscape. I have open change requests that I can not move to production yet so I can not complete the project. I have created another project and tested forcing the cycle closed and creating a new cycle, but the change docs are associated to the old cycle number. I have followed the steps in the charm FAQ for closing inconsistent project cycles (note 933705), but I couldnu2019t re-associate the change docs with the new cycle or project. I would think the need to change the landscape when you have open change docs would come up fairly often. If someone has successfully done this would you please provide the steps?
Thanks
Jeff

Hi Jeff,
ChaRM supports the logical component changes and also with modifiable transport orders.
Please take a look at the following link:
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
6. Changes in the logical components of a project where Charm is already activated
8. Completing a task list
A task list can be closed even with modifiable transport orders according to note 1071412 "Completing a task plan with changeable transport requests".
Then when you create a new cycle, the system automatically assigns these processes and objects to the new cycle. This is also logged in application log. To display the log entries, you can use transaction /TMWFLOW/MAINTINST. Navigate to the tab with your project type (usually the maintenance project) and choose 'Create...' and 'Execute'. Then select the required project and choose 'Messages at Time of Creation'.
Other related notes: 1354638, 1344191 and 1158885.
Best Regards
Fernando

Solman configration for system landscape having virtual buffers

Hi All,
We are having a system landscape with virtual buffers in the TMS.TMS transport path look like this
*Dev -> Virtual Buffer -> Quality -> Virtual Buffer -> Production*
We need to configure ChaRM for this landscape. We are able to get virtual system details in Solman and created the project. But ChaRM is failing while we try to import the transport requests to Quality.
Can you please guide us to configure solman for this landscape.
Thanks in Advance,
Shaju

hi,
if the goal is to have a better control of what is going to QA
the move to the QA happens anyway in 2 steps
you might want to control the release in your development (via solman). In this case just control the action "test transport"
you might want to control the import in QA. In this cas you manually import in QA
I don't see the added value to have an extra virtual system
SOLMAn will support your process with real system. You can send to a virtual system why not (we are using this technique for other reason), but it is a dead end
TMS won't support your landscape scheme because the move of a transport to the next system is related to the import from the previous system. If it is a virtual buffer you won't have the possibility to import it virtually.
Unless a Guru knows a magic trick I am convinced a virtual path won't work in our case.
I hope my explanations were enough to explain the constrains we have
best regards

You do not have permission to view the System Landscape Directory.

Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.

Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino.

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

SolMan ChaRM - System landscape not ready yet

Similar Messages

Maybe you are looking for