Solman Configuration for Portal.

Dears,
We have installed solman 7.0 and configured it for all our ABAP stack servers.
But now we want to configure it for our EP 6.0 also.
Please suggest how can it be done.
Is it possible to create RFCs in EP.
Shivam

Hi Ankur,
Thnx for the informartion.
So only I have to register the server in SLD beside it all actions will be taken care by systems.
Can you plz also sugget me how can i do register.
Shivam

Similar Messages

What is the initial account and password for Portal ?

Hi all:
I installed BW and Portal . I want to do some configuration for Portal , but don't know what the initial account and password? could you please give me a hint ?

If you get really stuck, you can try to activate the emergency user. See http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/bb6ca4f5fe307be10000000a42189b/frameset.htm for details.

Alert Mail configuration in Solution Manager 7.1 for Portal Runtime errors

Dear Friends,
We have EP7.01 SP5 installed on windows environment with Oracle DB. Also we have SAP EHP 1 for SAP Solution Manager 7.0.
Please help to provide steps to configure
proactive mail alert configuration ,
GRMG for High availability
Any portal runtime errors
for PORTAL services in Solution Manager.
Regards,
Venkat.

Hello Venkat,
You will have to include the Portal system in the Central System administration of your Solution Manager.
As the EP system will be monitored by a sapccmsr running with -j2ee option this one can be configured separately. The agent will be started using the monitoring segment of the J2EE instance and therefore can be started more than once.
Here you should also use the latest sapccmsr agents.
The following link provides details on the required agents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
Please refer the below notes.
214247 RZ20: Questions on configuration of monitoring data
704349 Activating the CCMS monitoring for TREX 6.1 (NW2004
Note the EP system can only be monitored by using the SAPCCMSR agents. and then by implement a central autoreaction method you can generate e-mails from CCMS.
Automatic emails will get generated when certain thresholds are met. You must configure the thresholds from the central monitoring system for the nodes that you want email to be generated.
Please follow the steps in the note to configure central auto reaction.
429265 CCMS monitor architecture: Central auto-reaction
In the central monitoring system ( Solution Manager in your case ), Goto RZ20, choose the monitor for the nodes that you are monitoring. Select the node, click properties, & check the threshold values.
Also refer to the following notes:
547024 - Transfer the EP 5.0 Monitoring-Data to SAP CCMS
644783 -P 6.0 Monitoring via CCMS / SolMan
Also, check the following link that has information on portal monitoring :
http://service.sap.com/~sapidb/011000358700002004322004E
I guess this is a whole lot of information to assimilate and will be helpful to you to setup what you intend to.
Regards
Amit

Want to delete all the mails in the mail box configured for BPM Portal

Hi All,
Do you have idea to perform this activity.
I want to delete all the mails in the Dev mail box configured for BPM Portal.
Server and mailbox details as given below :
Mail a/c = Y00123
Mail server = sap.mail.com
Thanks, Sanjay

http://java.sun.com/developer/onlineTraining/JavaMail/contents.html
http://www.jguru.com/faq/view.jsp?EID=17035
if you know the password of the account, i think you can also access the mail using mail client, like you use outlook to deal with your company mail daily.

Basic configuration in GRC 10 for portals

Hi Gurus,
Could you please tell me the basic configuration details in GRC 10 for portals.
Thanks,
Mukesh

Hi Mukesh,
You can refer to https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
However there is no such guide on Portal integration with GRC, you might need to follow below steps:
1- Create one HTTP type RFC connection between GRC and Portal system.
2- Create System Alias in portal system for GRC system
3- Deploy the GRC Portal content in Portal system
5-Portal content comes with 5 work-sets and one security role.You can assign the portal role that comes with the Portal content to user in Portal and also GRC roles to the same user in GRC system.
Hope this helps.
Regards,
Ameet

Need info to configure SSL for Portal Server in EP6SP2

Hello,
We need to configure SSL for Portal Server. We are using J2EE 6.20 Patch 25 and EP6SP2P4. The ITS is already using https and it creats lots of Session issues since Portal is not in https.
Is there any OSS Note or How to guide to configure Portal to use SSL.
Thanks.
- PK

Hi Marcel,
Thanx for your Post, I have a Question, we will use CISCO for load balancing and SSL termination but I have a big issue, the URL in the portal applciation is always the same ant the URL in the borwser, I guess al the other URL´s are in the Frames, how will we configure the SSL termination for the login page in example if the URL in the Browser appears always the same?
Thanx in Advanced!!!

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh

Error starting Portal or Commerce Server when Configured for Oracle

I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

I finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

LSO -- where in configuration do you enter URL for portal / corses

LSO -- where in configuration do you enter URL for portal / corses

Hi Matt,
Another address not mentioned in the other posts is the CMS address where your courses are physically stored. In the IMG you will find it here:
Training & Event Management - SAP Learning Solution - Learning Portal - Content Player - Specify CMS Address
Enter the appropriate http: address beside the setting CPCFG/RSURL
Once a learner clicks to launch a course from the portal, the system will go find the appropriate course in the CMS directory and then find the Content Plyer address previously mentioned to launch the course.
Hope this helps.
Best regards,
Danielle

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Configure of Portal Content for Material

Hello,
Need some direction on Configuration of Portal for Material, What would be the Web Dynpro application for Portal Configuration?
Web Dynpro Application: MDG_BS_MAT_OVP or USMD_ENTITY_VALUE2
Application Configurations: BS_MAT_OVP_03
We are working on MDG 6.1.
Regards, Srihari

Thanks Abdullah,
As per MDG doc, Portal shall import USMD_ENTITY_VALUE2. My question is we need to give Web Dynpro Application & Application Configurations and additional parameters to configure XML content.
So what would be the Webdynpro ID here.
Regards, Srihari

Portal Gateway configuration for Proxy functionality

Hi All,
Are there any customers out there configuring their Portal Gateway to go through
a Proxy server and then have the proxy server pass requests to the Portal server?
Or do you recommend configuring the Portal Gateway to go through the Portal server(via the gateway proxy add-on)?
Does anyone have pros or cons for the 2 scenarios?
Please email me at [email protected]
Thanks,
Chris Wilt
TransCanada

The proxy add ons with the portal server have both http and netlet proxy deamons, if your using netlet then the recommendation would be to use the netlet proxy for netlets and httpd proxy for http traffic.
If your not using netlets then you can put in a proxy server between the gateway and server. I have seen different customers use either of the two for security and varying reasons specific to their environment.
The httpd and netlet proxies are primarily used when there is a requirement to clamp down the number of open between the gateway and the server. Generally there would be a firewall between the gateway and server and for security reasons you don't want to open a lot of ports, so in that context with the gateway and netlet proxies you only open two ports in addition to profile server port and 443 if your running gateway on ssl.
HTH ..

Solman for Portal

Dear Expert,
can u inform me, what kind main utility of solman for portal and how to implement this utility ?
Thank.

Hi,
Check this link -- Workload analysis for EP
https://websmp201.sap-ag.de/~sapdownload/011000358700001094822007E/SP13_E2E_WL_Ana_EP.htm
Check this as well.
https://websmp201.sap-ag.de/~sapdownload/011000358700001094862007E/SP13_Wily_EP.htm
This should solve your problem.
Feel free to revert back.
-=-Ragu

Help required for MSS configurations on Portal

Hi Experts,
Can someone please send me Portal Configuration guide or some kind of document on how to configure MSS --> Overview and Organisation services. Do I need to pass any parameters or any other configurations required?
Please help me.
Earlier responses would be much appreciated.
Thanks
Uday

Hi uday,
Please find the below links
MSS Configuration within SAP Portal: Organization Structure
ESS/MSS configuration in Portal as a part of HCM
http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/1a6493d09849448a0537ee6727e799/frameset.htm
Hope it helps...
Thanks,
Rahul.

Solman Configuration for Portal.

Similar Messages

Maybe you are looking for