Solman connection with DEV + prodcution server

Dear friends,
Pls give the link for
1. SOLMAN configuration .... connection with DEVELOPMENT server and PRODUCTION server
2. Then .. if any document or pdf is uploaded in Development .. It is also display in SOLMAN.
thanks
Lee

Dear Lee,
Here are the steps to connect an Satellite System to Solman applicable to both Dev and Prd Systems :
1. Create the Server / Database / System Component in transaction SMSY (
Landscape Components ) to define the system to Solman. In the System component ensure that you have generated RFC's to the relevant clients of the satellite system using the Generate RFC function.
2. Then in transaction SMSY itself , Create an Logical Component for the product amd product version of the system and assign the system to the logical component as per the logical role of the system like DEV / QAS / PRD.
3. Then Create an Solution in transaction DSWP and add the Logical component to the Solution in the Solution Settings.
Bingo. Here you are set to either setup system monitoring for the satellite system or to generate EWA's for the satellite system or to configure Service desk and all other related scenarios.
I hope these steps help you configure Solman.
Regards
Amit

Similar Messages

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Failed to Establish Connection With SQL Database Server in Essbase studio

I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
Swathi

Thanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions?

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

Essbase Studio - Failed to Establish Connection With SQL Database Server

Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
Michelle

Michelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

JMX Connectivity with the Adminstration Server - Weblogic 9.x

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Does Thunderbird automatically maintain a constant connection with the email server?

Hi all,
I have only recently installed Thunderbird and I was wondering whether the software maintains a constant connection with the email server(s)?
I have a few email accounts configured and I need to be notified immediately when a new email arrives in an inbox of any of them, so would it be possible for the program to maintain a constant connection, if doesn't do os already? Is there an add-on for this?
Thanks!

If you click on the name of your email account (such as *****.gmai.com) and view settings for this account, and Server settings, there is an option to Check for new messages every XX minutes. I would not recommend a setting of less than 5 minutes.

Airport Express connectivity with a remote server

I have gone to our ISP already with this question, but they cannot assist me. I am hoping someone here will be able to assist me in solving this problem. My boss wishes to connect to our server at our company from his home using an Airport Express. The company's server is housed on our work site and connected to an internal network. This network is in turn connected to our ISP via a DSL modem. We opened the ports needed in order to connect with the server in house and redirected incoming traffic to the server's internal ip address. We had our boss test connecting to the server from his home. He could not do so. We were asked to have him try connecting directly to his DSL (also from the same ISP as what our company has). He will be doing that this evening. However, this does not help the fact that this diminishes the whole idea of him having wireless capability in his home or when he is traveling. We had our ISP test accessing our server remotely using Telnet, and it was successful. They were connected directly, however, not using a wireless network.
Is there something that we are missing here involving some sort of setting? Or is this something I need our ISP to dig into further? Please let us know if you have any ideas or suggestions. Thank you.
Apple iBook Mac OS X (10.4.7)

To combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General. Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
Also you can refer below link
http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

PeopleTools 8.49 PeopleSoft Database Cannot Connect with MS SQL Server 2005

Folks,
Hello. I am working on PeopleSoft PIA. My system is Windows Server 2003, MS SQL Server Express 2005 Standard, PeopleTools 8.49. I am setting up PeopleSoft Database \PsMpDbInstall\setup.exe and got the errors as follows:
Error: Setup fails to connect to SQL Server. The default settings SQL Server does not allow remote connection.
Then I type in "sqlcmd" in Command Prompt and got the same error as follows:
Name Pipe Provider: Could not open a connection to SQL Server. MS SQL Native Client: the default settings SQL Server does not allow remote connection.
In order to fix SQL Server 2005 remote connection problem, I have done the 3 steps as follows:
Step 1: In SQL Server Surface Area Connection, enable local and remote connection, TCP/IP and Name Pipes, SQL Server browser Startup type "automatic" and status "running".
Step 2: Create exception for SQL Server 2005 and SQL Server browser Service in Windows Firewall.
Step 3: Add the default SQL Server Port 1433 into Windows Firewall.
But the above 3 steps cannot resolve SQL Server Express 2005 remote connection problem. Can any folks help to resolve this problem ?
Thanks.

Folks,
Management Studio can connect with SQL Server 2005 successfully.
I have turned off Windows Server 2003 firewall completely. But "sqlcmd" in Command Prompt still connect with SQL Server 2005 because its remote connection is not allowed.
Is the "not allow remote connection" problem caused by Windows Firewall or SQL Server 2005 itself ?
Thanks.

Oracle Connectivity with MS SQL Server. ORA-00972: identifier is too long

I have linked Oracle Database with MS SQL Server using HS and DB Link.
DB Link Script:
CREATE DATABASE LINK "FCHH"
CONNECT TO SA
IDENTIFIED BY <PWD>
USING 'LISTENER_FCHH';
Links tested successfully.
Now "SA" user in Microsoft SQL Server has multiple databases i.e. Master,SecurePerfect,SecurePerfectHistory. when I try following command
select * from "SecurePerfectHistory.DBO.BadgeHistoryTable"@FCHH
ORA-00972: identifier is too long

ORA-00972: identifier is too long
Cause: An identifier with more than 30 characters was specified.
Action: Specify at most 30 charactersAman....

Solman connection with DEV + prodcution server

Similar Messages

Maybe you are looking for