SolMan-HPQC Integration - Field Mapping

Hi,
All the installations and configurations are done on both SolMan and QC.
Blueprint Integration is done and working fine.
During Defect Integration, when we try to do "Field Mapping" in QC, getting the below error message.
"The number of required defect fields in Quality Center is different from the number of required support message field in Application; Make sure the number of required fields is equal in both systems before you continue"
Once clicked "OK" to error message, there are no SAP Fields listed on both 'required fileds' and 'Non-required fileds' Columns.
Any solutions to resolve this issue?
Thanks,
Veera

Hi,
In the future, please reference the product being used to communicate between SOLMAN and HPQC. I assume this may be SAP TAO? Either way, you may be getting quicker replies to assist in resolving your problems this way.
Regards,
Mark

Similar Messages

Catalog integration in MM (html - SAP-field mapping)

Hi Experts! When integrating Catalog with MM (ME21N and ME51N), the only customizable entry in the IMG is the call-structure. Anyone who knows the transaction codes / tables for HTML-SAP-field mapping (OCI) for this scenario ?? (For PM/CS/PS-orders this is available, but I have not managed to find this for MM)...
brgs ziggy

to pull Metadata from CMS repository into MM, you will have to configure the CMS Integrator and run that CMS Integrator, this you can do from the CMC
as Werner mentioned SAP BW Integrator is being added for next MM release
its not possible to import Metadata from Excel Sheet into MM, you will need a Integrator to do that, MM supports Integrator for CMS, Data Services, RDBMS, and there are few more Integrators that are provided by MITI (it requires a separate license)
I don't think it will be possible to mimic the impact and lineage

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

In XI Mapping multiple fields mapping to single target field.

Hi Friends,
In XI Mapping multiple fields mapping to single target field.
For example my requirement is :
Source Fields:(This RFC BAPI Structure)
Empno                0-1
EmpName           0-1
Address             0-1
Taget Field is:
Details               0-1
The above three fields passed to the Details Field. Here i am using Concat function
But i have one query on that on,Every field having "line Break" required.
Can you please help me out above this requirement.
Thanks in Advance,
Sateesh N.

If you want a line break between the three fields, then try
passing a,b,c to the udf and in the udf you would have
return a+"\n"+b+"\n"+c;

ABAP code which will use function module during field mapping in LSMW

Hi,
During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
Please help...
Regards,
Tushar.

Hi Tushar,
You can write in FORM ROUTINE and LSMW.
I hope you know how to write ABAP code at field level.
If not ...
Come to change mode->select the field->Rule->ABAP Code
write a perform statement in ABAP code at field level.
<b>PERFORM test</b> using val
             changing valu.
Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
this is the place where you can write some code for
<b> FORM test</b> using value
          changing value1
FM call....
.ENDFORM
Get the value1 returned and use for the Field population.
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

Integrating Google Maps in Oracle Apex and 404 Not found error page

Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
Anyway, any help or suggestions are appreciated.
thanks
rtp
Edited by: RTP on Jun 24, 2011 10:30 AM

Hi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
Thanks!!

LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

Dear All,
We have a need to enable CUP Functionality (we use GRC AC 5.3) for one of our oldest R/3 systems - on 4.6C. All other R/3 backends are on 4.7+ releases, so it's a multiple backend configuration for GRC AC.
However, LDAP Field Mapping functionality is missing in 4.6C. It was enabled through LDAPMAP in the higher releases only.
At the same time, I discovered in one SAP HR document a diagram, which shows that indeed 4.7+ can map and post data directly to LDAP, but for 4.6C and below you can use WebAS 6.10+ as an LDAP Gateway. Meaning that 4.6C calls through RFC some functions in the higher release R/3 system to use its functions for Field Mapping and further transfer of user data to the target LDAP server.
But... I can not find anywhere how to configure 4.7 / 6.0 servers to act as an LDAP Gateway for the older 4.6C server to bypass its limitation - absence of built-in LDAP Field Mapping functionality.
Advice on how to realise this concept will be highly appreciated.
Thanks,
Laziz

Hi,
In order to migrate users, groups and password you have to use the command ldapaddent as you did with this sintax:
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/group group
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/passwd passwd
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/shadow shadowNote that you must use passwd instead of people container.
I suggest you to check this article from BigAdmin http://www.sun.com/bigadmin/features/articles/nis_ldap_part1.jsp
G.

Example of a custom field mapping?

Ok, I admit it I am struggling here. I have simplified my example from
what I actually have.
I have a table that models a flat hierarchy
ID | START_DATE | END_DATE | CLASSNAME | FIELD1 | FIELD2 | ...
one of the objects in my hiearchy (CashFlow) has a field that is in fact
another object called DatePeriod that contains two fields startDate and
endDate.
I understand that what I am trying to do is embed the DatePeriod object
inside of the larger object when it get's persisted.
I have the following metadata set-up
<class name="CashFlow" persistence-capable-superclass="InstrumentFlow">
<extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<field name="accrualPeriod" embedded="true"/>
</class>
and for my DatePeriod object
<class name="DatePeriod">
<extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="startDate">
<extension vendor-name="kodo" key="data-column" value="START_DATE"/>
</field>
<field name="endDate">
<extension vendor-name="kodo" key="data-column" value="END_DATE"/>
</field>
</class>
Every time I try to fetch a CashFlow object I get an error as KODO is
trying to select the column 'ACCRUALPERIODX.'
What am I doing wrong? Do I need to use a custom field mapping? If so
where is the documentation to help me write a custom field mapping?
A second question would be what happens if the DatePeriod object is used
in a couple of places, I don't want to tie it's persistence to the
INSTRUMENT_FLOW table.
All help gratefully received
Cheers
Matt

As you suspect, Kodo 2.x does not support embedded class mappings. Kodo
3.0 will support embedded mappings.
In the meantime, you can create a custom mapping, but unfortunately our
documentation for custom mappings is lacking right now. Given how simple
your DatePeriod object is, you're probably better off with something
simpler (and as a bonus, less bound to Kodo):
Just make your DatePeriod class and the field that holds the DatePeriod
instance non-persistent. In the class that has the (now non-persistent)
DatePeriod field, add two new persistent fields for the startDate and
endDate. Then just use internal logic to construct the DatePeriod from
the startDate and endDate. You can do this using the
javax.jdo.InstanceCallbacks methods, or just do the logic in your setter
and getter methods for the DatePeriod.

How to change field mapping in IDOC

Hi Experts,
My requirement is to create a purchase requisition automatically through an interface using the IDOC sent by a *source client*.
For this i have used PREQCR as the message type, PREQCR02 as basic type.
E1BPEBANC & E1BPEBANTX are the segment type i have to use.
I have created a Z process code in which the function module that i have used is IDOC_INPUT_PREQCR.
With the help of this i can map all the field values to PR.
Now there is a field in this idoc called vendor which comes from the source client.
Now the value that is maintained in this field(vendor) should go to the Text Id that is maintained at the header level. ( i.e. the header text. i.e. In transaction ME51N, the text IDs which we can see at header level, the vendor value should go in one of this text Id ).
Now how do i do this, because I am using standard funciton module IDOC_INPUT_PREQCR in which there is already field mapping that this vaue should go in this field and so on...
Do I have to use an exit for the same ?? If yes then which is the exit ??
Please suggest.
Regards,
Priti.

Hi,
I think there is no userexits available during the processing using function module "IDOC_INPUT_PREQCR". You have to copy this function module to a Z function module. Change as per your requirement and attach the new function module with the Z Process code created by you.
Regards
Vinod

Field Mapping of CREMAS05 IDoc..!!

Hi Gurs ,
Iam trying to map the following fields in CREMAS05 Basic IDoc Type but unable to find the correct mapping field segments in the IDoc.
Fields need to be mapped are:
1.Building Code
2. Pan No
Can anyone suggest me which segment and field i need to use for the above fields mapping..? or if i extended my idoc with some custom table how i will map into Standard field .
Thanks .
Hemant Gulati(A1)

Hi Jurgen ,
Thanks for Reply .
Vendor Master Idoc CREMAS05
i have extended my idoc with some zfields . in zfield i have Building code and Pan no
like zbuild and zpanno i need to map these in ADDR1_DATA-BUILDING and J_1IMOVEND-J_1IPANNO respectively .
Thanks & Regards
Hemant Gulati(A1)

LSMW field mapping Rule-ABAP code

Dear Guru!
I'm new to ABAP, but I have to write a little in ABAP.
I create a LSMW project using BAPI for changing standart price of material.
Input data: material, price, posting date.
The point is: system should found in table MBEW all valuation areas and valuation types fo which the material record is exist and cang price for all these records.
I wrote a code for these fields in Field Mapping menu. But it puts in only one record whereas I need it to execute BAPI for all records.
I wrote the folliwing:
VALUATIONAREA                Valuation Area
                   Code:    tables MBEW.
                            select * from MBEW
                             where MATNR = ZHEADER-MATNR.
                            E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY.
                            endselect.
VALUATIONTYPE                Valuation Type
                   Code:    select * from MBEW
                             where MATNR = ZHEADER-MATNR.
                            E1MATERIALVALUATION_PRICECH-VALUATIONTYPE = MBEW-BWTAR.
                            endselect.
May be it's simple, may be not. But I don't know how do do it.
Will be grateful for any hints.
Thanks.
Edited by: assoli on Aug 3, 2011 3:51 PM

select endselect goes like a Loop, so if you don't store the value in some table (internal table), only the last row will be available to you as it will be overwritten everytime in the loop.
There is no need of using 2 selects, one select itself will give you all the data for that material in MBEW table. I don't understand what you are doing with
E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY
Is E1MATERIALVALUATION_PRICECH a structure ? You need somethng like
select * from MBEW
where MATNR = ZHEADER-MATNR.
E1MATERIALVALUATION_PRICECH-MATERIAL             = ZHEADER-MATNR
E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY.
E1MATERIALVALUATION_PRICECH-VALUATIONTYPE = MBEW-BWTAR.
Append E1MATERIALVALUATION_PRICECH to itab.             "(itab is internal table)
endselect.
Then use that itab for your purpose.

Help needed - Field Mapping

Hi,
Detail:
========
I have a class called CustomerSpecificField extending another class
NameValueTimestamp which contains 3 attibutes name, value, timestamp.
In my package.jdo file when i tried to map my fields, I got the following
exception. the attibutes in the parent class are not at all recognized for
mapping.
JDO Info
========
<class name="CustomerSpecificField">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="ADB.UP_CUST_SPEC_FIELD"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
</extension>
<field name="name">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="NAME"/>
</extension>
</field>
<field name="timestamp">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="TIMESTAMP"/>
</extension>
</field>
</class>
Error:
=======
Exception in thread "main" kodo.util.FatalException: java.io.IOException:
org.xml.sax.SAXException:
file:/C:/kodo-jdo-3.1.3/bin/com/bo/package.jdo [Location: Line: 65, C:
37]: Field "timestamp
" is not declared in "CustomerSpecificField".
[java.lang.NoSuchFieldException]
NestedThrowables:
java.io.IOException: org.xml.sax.SAXException:
file:/C:/kodo-jdo-3.1.3/bin/com/bo/package.jd
o [Location: Line: 65, C: 37]: Field "timestamp" is not declared in
"CustomerSpecificField". [java.l
ang.NoSuchFieldException]

I have a class called CustomerSpecificField extending another class
NameValueTimestamp which contains 3 attibutes name, value, timestamp.In JDO, each class can only persist fields that it declares. So you
need to make your superclas a persistent class and map it, and reference
it with the persistence-capable-superclass attribute from your subclass.

Problem in lsmw. step: display field mapping and conversion rule

hi,
The IDOC structure to be mapped is missing in step 5[lsmw using IDOC]. Hence target structures are missing in auto gnerated conversion program.
As a result the the step Convert Data step is failing.[Converted data cant be generated]
I am using standard BAPI charcteristics as my Basic Type.
Anyone having idea why the target structure is missing??..

The problem is solved....The field mapping was missing coz i didnt assign the target structure properly....

Auto field mapping not working

Hi,
I am working on LSMW for transaction DGP2. for the 5th step ( 5 Maintain Field Mapping and Conversion Rules), this functionality is not working niether I am able to assign manually. The source structure might have problem. How should I find out the error in which step and how to sort out that?
Thanks in advance,
Rgds,
Madhuri

Hi Chenna,
I have given same structure for this one. Still its not working.
please help.
Thanks
Rgds,
MAdhuri

SolMan-HPQC Integration - Field Mapping

Similar Messages

Maybe you are looking for