SOLMAN & IDES ERP 6 installation on same host

Hi all,
I have to install solman 7 & IDES erp6 on the same host.
first iam going to install solman as need for solmankey.
my issue is that do i need to instal java jdk, oracle, patch and all which are same for both or only export .
how do i go abt after solman installation
Please advice
Regards,
palle

Hi ,
Ofcourse only installing JAVA once at /opt will work.
The sapinst automatically detect the java from /opt folder .First install your solman system & then install with your ECC.Here i would like to recoomend that you go for separate database for both instance as it will give you more easiness as well as less administrative efforts while working with the sysyem after installation.
Hence the correct order of instalaltion will be something like this::
1.install java at /opt
2.set JAVA_HOME & other display variables
3.start sapinst & install CI of solman
4.in between it will prompt you to ask to install oracle s/w
5.install oracle s/w with required patches assume its 10.2.0.4
After successful installation of solman refer same sequence for ECC installation as said from point 2.That means you need not to install java & directly for ECC you can start installation from point 2.
Thanks..
Mohit

Similar Messages

Is it possible to install Solman and ERP on the single Host

Hi,
I want to install Solution Manager 4.0 and ERP ECC 6.0 on a single Server.
So is it possible to choose the System-ID e.g. "XA0" for Solman4.0 and "XA1" for ERP ECC 6.0.
Firstly, do I need to demand two Installationnumber, one for SOLMAN and the other for ERP.
Secondly, how should I deal with the Systemnumber should I choose 00 for java and 01 for ABAP and which number should I choose for ERP.
Finally, how is it possible to access to the two system with only one server, naturally using the SAP Logon. Do the Systemnumber has a real impact on that.
Please, send me a respond as clearly as possible. I will be thankful for that.
Ps. I installed the two systems before, but unfortunately I used the instancenumber 00 for ERP. The impact on that, that I wasn't able to access Solman anyway. I used the same System-ID for Solman and ERP, does it really matter?
Regards,
Kais

Hi Kias
1. Yes
2. Depending on if you are highly available you may need more system numbers - for example there are SCS and ASCS components. I would recommend installing 10 apart (system 00 and system 10). It makes little different which number is which.
3. Yes, system number relates to something called ports. ports are used to listen for incoming traffic of that type. (I listen on port 3200 for the ECC system GUI traffic, I listen on 3310 for the solman RFC traffic).
If you are in the same local network as the segment you will be able to access all ports on a server, but if through a firewall or various other part of the network you are likely to need to request a few ports to be opened.
You cannot have different systems on the same number due to on one executable (not just SAP) can use a port at a time.and also such local thing like shared memory would not make this feasable.
As you installed two systems on the same system number you can start either one successfully, as long as the other is stopped at the time.
I hope this help
regards
Graham Newport

ECC6 and Sol Man on same host

Dear All,
1. I want to install SolMan on Solaris 10. Please guide me from start..
2. I want to install SolMan and ECC6 on the same host. What is the procedure I need to follow( I mean from creating the LV ..)
Please guide.

1. I want to install SolMan on Solaris 10. Please guide me from start..
Use the official installation guides, they contain everything you need
http://service.sap.com/instguides
2. I want to install SolMan and ECC6 on the same host. What is the procedure I need to follow( I mean from creating the LV ..)
This is also covered in the guides.
Are you going to use VxFS? If you´re on Solaris 10 try ZFS - MUCH easier to configure and handle!
Markus

IDES ERP 2004 installation / Solution manager

I am about to install IDES ERP 2004 on a test desktop system and I would like to know if I also need to install solution manager, any suggestions?
Thanks
Frank

Hi Frank,
Welcome to SDN!
You can find the guide for ERP 2004 installation at
http://service.sap.com/instguides -> ERP 2004. Its
the same as a DB instance isntallation. You just have to
provide the IDES DVDs. No need to install the solution manager.
Regards
Srikishan

SolMan 7.0 + IDES ERP 6.0 on 1 machine for 1-man-show with MaxDB?

Sorry - I know that what I've done is unusual and somewhat suspect, but anyway: I've successfully installed -just for personal interest- both (SolMan 7.0 plus IDES ERP 6.0 SR3) on 1 machine, which is a very small PC with Windows Server 2003 x64 and MaxDB. I can start SolMan OR I can start ERP. But every time the used memory climbs up to about 10 to 12 MB.
If I would start both in parallel (but I hav'nt done that yet because I had not the courage to find it out), real + virtual memory might not be sufficient (and the mainboard of the pc does not allow more than 4 MB of memory).
Has everyone ever tried to downsize the default parameters of sapinst to the lowest possible values for a 1-man-show? I wunder what the minimum values for all the parameters of such a SolMan + ERP on MaxDB configuration might be, that would perfectly work if there would be only 1 user?
Is there any help or interest in this? If I could not receive helpful answers, it might be possible to me to provide the results of my furthers studies. But I would really prefere to make use of other collegues' experiences first. Thank you for your answer.

> Sorry - I know that what I've done is unusual and somewhat suspect, but anyway: I've successfully installed -just for personal interest- both (SolMan 7.0 plus IDES ERP 6.0 SR3) on 1 machine, which is a very small PC with Windows Server 2003 x64 and MaxDB. I can start SolMan OR I can start ERP. But every time the used memory climbs up to about 10 to 12 MB.
> If I would start both in parallel (but I hav'nt done that yet because I had not the courage to find it out), real + virtual memory might not be sufficient (and the mainboard of the pc does not allow more than 4 MB of memory).
Hi there,
first of all - you're talking about Gigabytes instead of Megabytes are you?
Thought so... Anyhow, it doesn't matter how much RAM you can put into the machine, since Windows supports virtual memory, a.k.a. a pagefile.
So basically it's not a question if the whole thing would run, but rather a performance question.
The next thing is: you didn't try it. Why not? What bad thing should happen?
Move on - try it out.
MaxDB will start as well with a very small data cache.
NetWeaver will start with only a few disp+work processes and perhaps you don't need a J2EE instance.
Depending on what you want to do, you can save a lot resources.
regards,
Lars

Central NetWeaver Installation and DB Instance on same host?

HI all,
Would like to ask a question about NetWeaver installation.
If I choose central installation, means Central Service Instance, DB Instance and Central Instance will be on the same host, but can my DB, say SQL Server reside on separate host?
If not, is it correct that I have to choose distributed installation? So if distributed installation, can I install Central Service instance and Central intance on one host, and DB instance and SQL Server on another host?
Thanks,
Kelvin

Hi KL:
You can get this answer directly from the Installation Guides.
You can download the installation guides for NetWeaver under: https://service.sap.com/instguides
Hope this helps!
Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com

IDES ERP 6.0 incl. EHP5 Installation on Windows 2008(R2) , Oracle 11g

Dear Team
Is the installaiton of IDES ERP 6.0 incl. EHP5 possible on Windows 2008(R2) and Oracle 11g?
Thanks & Regards
Lakshmi

Hi,
You can check for this information at https://service.sap.com/pam
PS: This is the not the right forum for this question.
Regards,
Vishnu

Problem with integration of IDES ERP 6.0 EHP4

Dear friends,
We have to integrate IDES ERP 6.0 EHP4 sytem to Solutionmanager 7.1 SP4.
We are not able to add the product instance SAP ERP 6.0 as mentioned in:
http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
Under landscape verification, selection for IDES system in product assignements is red, it's requires not only "ABAP technology for ERP EHP4" , but also "SAP ECC Server" with Productversion SAP ERP 6.0. As allready mentioned, it's not possible to add under TC "/nLMDB".
Thanks for any hint
Kind regards
Thomas

Hi Thomas,
In LMDB, until you have maintained the details properly status shoudl be red.
For technical content, you have to manually add all the details , like system name, host, DB server credentiials, instance number,
product instances, software component versions.
you can edit that using techical system editor.
you can get the LMDB demos on service.sap.com\rkt-solman
please check,
Thanks,
Jansi

SAP ERP Installation

Hi
i would like to install SAP ERP 6
Could you help me which files i need to download from market place?
I have dowloaded
SAP ERP 6.0 SR3 Installation Export 1 of 6 to 6 of 6 ;
ERP 6.0 SR3 Upgrade Master Windows Server on x64 64bit ;
SAP ERP 6.0 SR3 Components ;
SAP ERP Central Component 6.0 SR3 Language DVD Hebrew
But where is the sapinstall.exe `?!?!
I need it till tomorrow, i hope you could help me...
I dont have any SAP - System installed on this system. On another i have the crm 7, but we want it seperate.
Is ERP and ECC the same one?
regards

Hi
Below are the things you needed for installing ECC6 on windows 64bit sytem
www.service.sap.com/swdc
-->Download
-->Installations and Upgrades
-->Search for Installations and Upgrades
and enter the label name provided below
EXE 51033500_1 SAP ERP 6.0 SR3 Installation Export 1 of 6
RAR 51033500_2 SAP ERP 6.0 SR3 Installation Export 2 of 6
RAR 51033500_3 SAP ERP 6.0 SR3 Installation Export 3 of 6
RAR 51033500_4 SAP ERP 6.0 SR3 Installation Export 4 of 6
RAR 51033500_5 SAP ERP 6.0 SR3 Installation Export 5 of 6
RAR 51033500_6 SAP ERP 6.0 SR3 Installation Export 6 of 6
ZIP 51033525 SAP ERP 6.0 SR3 Components
ZIP 51033526 BS 2005 SR3 Java Components
ZIP 51033508_15 NW 7.0 SR3 UC-Kernel 7.00 Windows Server on x64 64bit
ZIP 51034992_13 ERP 6.0 SR3 IDES Inst. Master Windows Server on x64 64 bit
IDES ERP 6.0 ECC 6.0 SR3 Note 1244548
http://www.saptechies.com/ides-erp-60-ecc-60-sr3-note-1244548/
Regards
Uday

IDES ERP 2004 - System Requirements

I am about to install IDES ERP 2004 on a test desktop system and I would like to know if you have recommendation over the minimum system required.
I am installing it over XP professional.
I am installing it using minimum system landscape (AS + DB on the same machine).
This is what I was aiming for:
Single PROC, 3 Gb RAM, 500 Gb Disk. Am I too high?
Any suggestions?
Thanks
Message was edited by: Leonardo De Araujo

Hi Satish,
I have sent you the ERP 2004 Master Guide and the ECC 5.0
installation guide. The IDES installation is same as a DB
instance installation. You have to select the IDES DVDs
for ECC 5.0 during SAPInst. For more on ERP 2004 guides
visit http://service.sap.com/instguides -> mySAP Business
Suite -> ERP -> ERP 2004.
Hope it helps
Regards
Srikishan

Multiple IDM instances on same host

Can multiple Identity Manager app server instances be run on the same host, connecting to the same db? If so, how is this accomplished. From what I see Identity Manager instances attempt to register themselves using the host name. Is there a property in the properties file that can set a unique name?

It appears to be possible, at least in IDM 7.1
The release notes and Installation guide reference a setting called waveset.serverId that you set in your application server startup script like so:
-Dwaveset.serverId=Name
This would allow each JVM to identify itself differently from any others running on the same physical server.
I haven't tried this yet myself, so caveat emptor.
Jason

Creation of Standby database on same host

Hi All,
I am using oracle 9.2.0.1.0 on windows XP machine.
*I want to create the standby database for my primary database on same machine.
But both tha data base is heaving diff instance as well as the diff database name say "ASHU" for primary & "TEST" for standby database.
I took the backup of all datafile and copied it in the standby location.
Generate the standby control file also and copied to the standby location.
But when i am going to start the standby database it is giving the below error:
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> alter database mount standby database;
alter database mount standby database
ERROR at line 1:
ORA-01103: database name 'ASHU' in controlfile is not 'TEST'
How to rectify it? Please help me
(* This is only for learning pupose , that's why i am going to create both on same host"

>
SQL> alter database mount standby database;
alter database mount standby database
ERROR at line 1:
ORA-01103: database name 'ASHU' in controlfile is not 'TEST'
How to rectify it? Please help me
>
You do not change the dbname of the physical standby database. They always must have the same name as the primary.
Here is a snippet from my standby initialization file for a 9i installation. Notice the parameter LOCK_NAME_SPACE that was replaced in 10g with DB_UNIQUE_NAME
db_file_name_convert=('E:\PRIMA','E:\PHYST')
db_name='PRIMA'
instance_name='PHYST'
service_names='PHYST'
lock_name_space='PHYST'
log_archive_dest_1='LOCATION=E:\PHYST\ARCHIVE'
log_archive_start=TRUE
log_archive_format='%t_%s.arc'
log_file_name_convert=('E:\PRIMA','E:\PHYST')Kind regards
Uwe
http://uhesse.wordpress.com
Edited by: Uwe Hesse on 27.07.2009 13:36

JDK error in SolMan 7.0 installation

I am installing SAP Solution Manager 7.0 on Windows 2003 Server R2 Enterprise x64 and Oracle 10.2.0.4 Patch 8
During the installation its asking me to install a JDK and enter the location.
But when I give the path C:\j2sdk1.4.2_12 it says this JDK does not support the 64-bit data model!
Notes:
1. I have already installed 64-bit PI 7.1 without errors on this same host with this same JDK and OS/DB
2. I searched for 64-bit JDK but only JDK 6 is available and I dont think SAP supports this yet.
3. Besides, I understand that 64-bit JDK is specially available only for SAP customers but I am unable to find it on service.sap/swdc
4. I searched SAP Note 723909 as mentioned in the installation guide but could not get much info out of it.
Can someone tell me how to proceed?
Thanks

I got the download link in SAP Note 941595
Its http://java.sun.com/j2se/1.4.2/SAPsite/download.html
Related links:
What are prerequisites for SAP ISA (Internet Sales)
/message/2787330#2787330 [original link is broken]

2 mta in the same host

hi,
i'm trying to make some test with an antivirus. i have only one server i installed ims 5.2 (smtp at port 10026) with iDS 5.2 (port 389), and i installed another iMS in the same host but the smtp is at port 25, before i install the antivirus software i tried to make some test with the IMS.
both iMS share the Directory Server.
first i send an email at port 25 then the server send the message at port 10026 in the same sarver (i saw the logs and it did it) but in the instance that use the port 10026 only enqueue the mail, does anybody have any idea of what is going on!, maybe the things i'm testing are wrong. ....
When i run the ./msg-stop smtp in the instance that use the port 25 then the instance with the port 10026 delivery the enqued mail..

thanks for your answer..
i read the documentation that you send,
but the documentation of the antivirus say that needs two mta to make a special configuration, the thing is the doc say that needs 3 servers:
1 mta/IN (pto 25)
1 server AV (100025)
1 mta (pto 10026)
the thing is that i only have one server, and i'm trying to do the same configuration with my server..
The people that sell the Av software said that they can do the same configuration in one server but using like mta Postfix.
i'm tryin doing the same with IMS.

How to divide SAPS when having two instances on same host

Hello
I wander how to divide SAPS when having two instances on same host. By looking at st06?
Thank you in advance

Yes SAPS is nothing but the CPU power used by the SAP systems. SO if you have 2 SAP systems stacked on the same server, check the CPU utilization over a period of 7 - 10 days, average out & that should give you a fair bit of idea.
- Regards, Dibya

SOLMAN & IDES ERP 6 installation on same host

Similar Messages

Maybe you are looking for