Solman + Quality Center 9.2 Integration

Hi
Has anybody used the Solution Manager and Quality Center 9.2 together. I am wondering if there is a plug-in available to integrate solution manager with quality center 9.2. If anybody can throw some light, the help will be highly appreciated.
I am aware that there was a plug in available for the earlier version Test Director 7.0 and Solution Manager. But with the new version I am not sure.
If anybody can throw some light as to what are the advantages and disadvantages that will really help us decide for our work.
Thanks
Rakesh Jain.

Hi Praveen,
I am getting the same error
"No requirement found in project <Project name>
Message no. QC_INTEGRATION030"
we are using Solman Ehp1 and Quality Center 10.0 patch 16
Please help
regards
Naveen

Similar Messages

How do i start doing SolMan integration with HP Quality Center?

Hi guyz,
I am new in this SAP field with zero knowledge on it and my first task being assigned to me is to integrate SolMan with HP Quality Center. So how do i start? What do i need to know before doing the integration? As iI know by far SolMan need to have QC adapter to communicate with HP Quality Center. What is the adapter anyway? Correct me if i'm wrong. Really need you guyz expertise on this. Thanks.

Hi,
The SAP Solution Manager Adapter for SAP Quality Center by HP is an interface between
SAP Quality Center by HP and SAP Solution Manager. SAP Quality Center by HP extends
SAP Solution Manager testing capabilities u2013 together they achieve a full integration of test
people, test processes and test data in the SAP Solution Manager Application Management
Platform. The integration on SAP Solution Manager side is realized via the SAP Solution
Manager Adapter for SAP Quality Center by HP.
After installing the Adapter, please check the Note: 1285941 for the installation of EIM versions and Solution Manager versions.
Please refer how to guide in Learning Maps.
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706460&_SCENARIO=01100035870000000202&
We have to check for the activation of SM_QC_AD Enterprise Addon from IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate
Solution Manager Enhancements.
Then follow the IMG activity transaction spro: Scenario Specific Settings-> Third Party Integration-> SAP Quality Center by HP-> Integration Test Management & Integration Defect Management.
Hope this helps.
Thanks,
Raghavendra.

SolMan integration with HP Quality Center

Hi Friends,
Is there any way by which we can integrate Solution Manager with Mercury Quality Center?
Please let me know.
Thanks,
Rock

Hi Rock,
The short answer is - yes, you can, after buying a 'Adapter' that SAP sells.
I am not sure if you have already seen some relevant pages and still have this doubt. In any case, I have listed some places where you would find relevant literature.
(1) http://service.sap.com/rkt-solman
In the above link, after supplying your OSS ID and password, you have access to various training documents. One of the links contain SAP Tutor and PDF files on this subject.
(2) For Adapter information, please got to the following link:
http://service.sap.com/upgrade
Click on Product Availability Matrix and then search for Adapter QC in Quick Search for Product Versions box.
You would get a window message that confirms that the Adapter is made available by SAP since 13.03.2008
(3) You also find some more information from 'Online Help' section on Solution Manager
Trust this helps.
Regards,
Srini

Quality Center/Solman configuration help

Hi. We're having some issues with our Quality Center/SolMan integration. We had it set up and working, and now "something" changed but we're not sure what, and our QC guru quit a few weeks back
We seem to be having authorization issues, but we're not sure where the config issue is. We have a user trying to push data from the Solman instance to Quality Center - when we look in the QC App server log, we see this.
com.hp.erp.ei.service.sm.base.exceptions.AuthorizationException: User is not authorized to perform the action PushBlueprintAction
the user is an admin on the QC system, the ID that was initially configured in Solman to handle the transfer also 'seems' to have the correct permissions. Where do we need to start looking to solve this?
What other information can I provide to help this out?
Thanks!
Bernie.

Hi Bernie Krause
1. Please check this back group communication user is not get deleted:
SAP_QC_INTERFACE Authorization for background communication user
2. check this also:
SAP Quality Center by HP
See IMG activity: Information and
SAP_QC_BY_HP_ADMIN Full authorization to configure, send and receive
data to/from Quality Center; needs to be assigned
additionally with respective role for Implementation
3 Did you check the Security guide under the communication channel
Solution Manager to Quality Center by HP uses following protocol SOAP
For more accurate details go to : https://websmp207.sap-ag.de/securityguide
you should be fine...
Regards,
Santosh Asuthkar

Are you utlizing SAP's Quality Center with Integration to Solution Manager?

Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
Abu

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

HP Quality Center Enterprise Integration problem

Hello,
I have a problem with the Solution Manager Enterprise Integration for Quality Center. I configured the adapter without any problems. Anything set up, BUT when I try to export the Business Blueprint in solar01 using send to quality center I always get the error QC_INTEGRATION030 "no node selected", even though I selected nodes for export and also the entities have a document in the quality prerequisites.
Does anybody have a clue what I'm missing, or where the problem is?
Any help would be appreciated.
Thanks in advance!

The root cause seems to be
XRFC> -
<
XRFC>                                                                     <
XRFC> TRACE SOAP RUNTIME - trace records                                  <
XRFC>                                                                     <
XRFC> -
<
XRFC> E SOAP_RUNTIME 20090512110746.8590000 : CL_SOAP_RUNTIME_CLIENT      <
XRFC> ->EXEC_PROCESSING Exception handling in SOAP runtime                <
XRFC>                                                                     <
XRFC>                                                                     <
XRFC> E SOAP_RUNTIME 20090512110746.8590000 : CL_SOAP_RUNTIME_CLIENT      <
XRFC> ->EXEC_PROCESSING SOAP Fault Exception caught: : com.mercury        <
XRFC> .erp.spi.qcsmintegration.service.UnknownException                   <
XRFC>                                                                     <
XRFC> -
XRFC> End of user trace
Would that help?
Please let me know how I can further circle the problem

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

HP's Quality Center Integration with SharePoint 2010

Hello,
I am having an requirement to access all the records from HP's Quality Center 11 and import those in SharePoint List.
Is there any way we can consume the web services exposed by QC and utilize the same in SharePoint to retrive the data ?
Also, I don't have an access to the SharePoint Server, So Is there any way I can
connect to the QC from Client Side Scripting or Is there any OOB options which lets SharePoint to connect to the QC to retrive the items ?
Any help on this will greatly appreciated.
Thanks in advance.

You'll need some form of access to get a proper solution in place, one of which would be 2010 Business Connectivity Services(BCS)
http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

ECatt automatic testing and solman vs. HP quality center?

Hi!
We are planning to implement eCatt automatic testing functionalities as part of current solution manager test plan management tools so that part of test cases in target ERP system would be launced in tester worklist as automatec cases.
How do you see is there any advantages in eCatt if compared to HP Quality Center testing? Advantages and disadvantages of both?
Edited by: Arto Heikkilä on Nov 11, 2011 11:48 AM

Dear Alagammai,
How r u?
PFA the link which explains whole process with snapshots.
https://websmp204.sap-ag.de/~sapidb/002007974700000223272007E/QC.pdf
Please reward points if it helps.

Using Quality Center (v9.0) to automate testing in SAP- questions/guidence

Hi,
First time on the expert forums for me. Hope you are able to help provide some guidance on this area for me.
Overview is our client is looking to fully automate testing in SAP for patches/upgrades/new developments by using Quality Centre v9.0 (which was implemented for test management as part of upgrade to SAP ERP 6.0)
I am starting to investigate this for them and looking for some answers on queries I have / guidance on whta is required to meet this objective.
- I have read mention of "SAP Quality Centre". Is this different to HP Quality Centre that we currently have installed? If it is different to HP QC do you need the SAP Quality Centre version installed to be able to automate the testing? Or is SAP QC if you just want to do it stand alone without using Solution Manager?.
- To automate testing in QC 9 is the implementation of SAP Solutions Manager required to enable it?
- Are other tools required to be implemented to enable the automation of testing in SAP ERP with HP Quality Centre ? eg for the process modelling (I read about the use of ARIS earlier?) or is the modelling done in SAP Solution Manager functionality?
- Is there qa brief overview anywhere on SAP or HP site that states the steps to automate the testing. eg Is the detail in QC for the transactions/parameters to use for each test or is this in SAP Solution Manager/Modelling tool? Also effort required in the implementations that are required (application wise) and effort required to get tests set up to the level required for the automated testing.
Any help/advice is greatly appreciated. As you can tell I am coming at this form a point of nearly zero knowledge on how it all fits together/effort required.
Thanks

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

Hp Quality Center Adapter for Solution Manager two-way

We just recently installed the SAP Adapter for Quality Center 2.0. The installation worked to the point of sending requirements to QC but when we try to send test results to Solman we just get a "In progress" and it never completes.
We reviewed the QC logs and we don't see the url information for Solman in the log. It just blank. Does anyone have any idea of what the issue could be.

Hi
I'm actually in a project where we want to integrate SAP SolMan Stack 18 (EHP1) with HP QC 10.0. So, to my knowledge, we need to have from SAP the SAP Adapter for QC 2.0 (which you have installed) and from HP the HP Enterprise Integration Release 2.0.
My problem now is, that I can't find anywhere on sap.com this SAP Adapter for QC 2.0. There is only 1.0 available.
So, as you can imagine, I would be very eager to know where you got this Version 2.0?
At the moment we got, officially from SAP, this name form a responsible in India who we should contact and nothing else.
Thanks for clarifying and helping.
Thomas

Quality Center Adapter - Connecting Multiple Solution Manager Systems

We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.

I have answered this question in this post below:
http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
To quote myself
Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
Hope that helps.

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

Solman + Quality Center 9.2 Integration

Similar Messages

Maybe you are looking for