Solman Road Map Issue

Good Day,
I have created the new Roadmap using the RMDEF/RMAUTH and i want to use that Roadmap in one of my Projects in Solution Manager.I have selected the Same Roadmap in Scope of the Project in (Project Administration),But the Structure or Hierarchy which i Created in Roadmap is not showing in the Project.
Can someone help me with that or if you guys can tell me how to Upload the New Road map in Solman Correctly.
Thanks and waiting for a Positive Response.

Hi
If you are talking about creation of structure in solar01 then it has to be done in solar01 only via the Structure tab
If you press F4 and choose the Business Process Repository and you can select all the Business Scenario like Procure to Pay etc which are to be used in you project here
for non sap scenario directly edit or write it ant then save.
you can check below link
https://websmp103.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Hope it clarifies your doubt
Regards
Prakhar

Similar Messages

Road Map Step Label Changes Issue

Hi Gurus,
I am working for ESS business package. I have changes FPM application to read Edit as "Display" for Road map step. I have tested it and transported it to test system.
The changes were working fine till yesterday; today when i tries to test the application the road map step is reverted back to read as Edit not Display. I do not find any one changed the FPM application.
what would be the reason.
my observations are like; I had some changes in some component and deployed it and have transported NWDI transports to Test system. i suspect this transports have changed the FPM application.
Please suggest me on this issue,.
Points will be awarded..
Thanks
Srikanth

Hi Srikanth,
the short answer
You modified the FPM application from within the portal, using the Self-Service Administrator portal role, right? The point is that this content is also contained in the SAP_ESS SC in NWDI. It's contained in all those cfg DCs you see. They basically contain a (zip)archive that contains other (zip)archives that contain different XML files that eventually describe the FPM application. So what happened is that you modified the FPM application at runtime, but your changes were overwritten when the cfg DC was deployed afterwards.
the details... and the questions...
Concerning those cfg DCs. They're a very specific type of DC. The type is "Enterprise Portal" and the subtype is "Portal Content". In NWDS, this is described in the following XML file: C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.ide.eclipse.component.provider_2.0.0\componentTypes.xml When I was using NWDS 7.0 SP12, this particular type of DC was not visible (if I remember it correctly), i.e. I could not create a new DC of this type. NWDS SP12 also didn't contain the necessary plugin, com.sap.portal.pcd.ide.eclipse.nwdi.ui.NewPortalContentWizard, as described in the same XML file (or at least I couldn't find it). Since I installed NWDS SP14, the plugin is present and I can create this type of DC myself. But that doesn't help me that much, since the wizard just creates some empty DC and I don't have a clue how to populate it with the content of the FPM application. Unfortunately I also don't have a clue about how to modify the existing cfg DCs in SAP_ESS.
BTW, the change you made, a small textual change, is relatively easy to do: unzip the archive(s) in the cfg DC, modify the text in one of the XML files (for some reason the translation of the roadmap steps are present 4 times, if my memory doesn't fail on me) and zip everything again. This works fine for me.
the $1 million question...
Obviously, what I really like to know: how to modify the FPM applications on the portal using the Self-Service Administrator role (that's easy) and export it to a suitable archive that can be imported in the (SAP_ESS) cfg DCs? As long as this is not possible, meaning I don't have a clue how to do it, I'm forced to deploy the modified FPM applications, which I exported as an epa file, after each NWDI transport. And this is not very practical...
I hope my (probably a bit too complex) explanation makes any sense.
If someone else knows more about this subject or how to deal with it, please let us know. tnx!
Kind regards,
/Sigiswald
Edited by: Sigiswald MADOU on May 23, 2008 2:30 AM
I posted the same question in the NWDI forum: (ESS) FPM applications, cfg DCs & Enterprise Portal / Portal Content DC

What is Road map Analysis, Issue tracking,, Monitoring, Reporting?

Hi
Friends
what is Road map Analysis, Issue tracking,, Monitoring, Reporting?
can any one clear my doubts in detail full points will be given

Dear Venkat,
Your questions are very high level questions.
Roadmap Analysis: This term is generally used in SAP Implementation where we compare the project status with the SAP roadmap. Generally in ASAP Roadmap, we have SAP specified standard deliverables, and there can be custom deliverables as per the client's requirements. If we need to do an analysis of custom deliverables viz standard deliverables or standard roadmap viz custom roadmap, we call it as roadmap analysis.
Issue Tracking: Very broad level term - can be in Implementation as well as support projects. Issues are either support problems or implementation problems which are documented and recorded for solutioning and approval. These are generally steering committee terms used in a project.
Monitoring: Again a broad level term. Any watch process can be termed as monitoring. Eg: Monitoring of Backup; Monitoring of System health check etc.
Reporting: Again a broad level term. It is the same as defined in the english dictionary. Nothing related to any process in SAP with technical solution in mind.
Regards,
Anirban

ESS FPM: To achieve a particular Road Map Pattern

Hi,
We require to achieve below mentioned functionality for one of the Custom Developed Web Dynpro objects.
Functionality to be achieved
Using EP 7.00 feature; wherein Roadmap is designed on EP side using FPM Application and FPM Views and Web Dynpro DC contains only Fc and Vc components (there is no Cc component on WD side); we need to get below road map behavior for the custom developed application u2013
Custom developed Application has:
(1) 4 steps - OVERVIEW, EDIT, REVIEW and SAVE, CONFIRMATION.
(2) Overview screen has got 3 buttons u2013 BTN1, BTN2 and BTN3
(3) Navigation requirement is u2013 when BTN1 is clicked, control should go to REVIEW and SAVE screen from OVERVIEW screen and then is BACK button is clicked (on Review and Save screen) control should come back to OVERVIEW screen from REVIEW and SAVE screen if BTN1 is clicked.
If BTN2 or BTN3 is clicked, control should go to EDIT screen from OVERVIEW screen and follow normal path as EDIT à REVIEW and SAVE à CONFIRMATION and the same way if BACK button is clicked on REVIEW and SAVE control should come back to EDIT screen, here again if BACK button is clicked control should go back to OVERVIEW screen.
So in short it should be u2013
BTN1 clicked
OVERVIEW ---> REVIEW and SAVE ---> CONFIRMATION
OVERVIEW <--(BACK button)--REVIEW and SAVE
BTN2 or BTN3 clicked
OVERVIEW ---> EDIT ---> REVIEW and SAVE ---> CONFIRMATION
OVERVIEW <--(BACK button)EDIT <(BACK button)--REVIEW and SAVE
All the above behavior should be satisfied using FPM road map.
Thanks,
Mahesh.

I had a similar issue where my authentication was happening in 'login.do'. To solve this issue, In my filter, I checked if the request uri was 'login.do'. I tested it and it works. Hope this helps!
public class AuthorizationFilter implements Filter {
private FilterConfig config = null;
public void init(FilterConfig config) throws ServletException {}
public void doFilter(ServletRequest servReq, ServletResponse servRes,
 FilterChain chain) throws IOException, ServletException {
 HttpServletRequest httpReq = (HttpServletRequest) servReq;
 if (httpReq.getSession().getAttribute("userinfo") == null) {
 if (httpReq.getRequestURI().endsWith("login.do")) {
 chain.doFilter(servReq, servRes);
 } else {
 config.getServletContext().getRequestDispatcher("/login.jsp").forward(servReq, servRes);
 } else {
 chain.doFilter(servReq, servRes);
public void destroy() {}
}

Disabling the Sub Road map steps in web dynpro abap

Hello Experts,
I am using Floor Plan Manager for Road map(FPM_GAF_COMPONENT).
I have 5 main road map steps of which the second one has 3 ( 2.1, 2.2 , 2.3 ) sub road map steps.
I have a requirement of enabling only the sub road map step in which we are presently in.
The other sub road map steps should be disabled.
Like if i am in 2.2 then 2.1 and 2.3 should be disabled.
I have solved this issue for main road map steps but unable to find a way for doing the same with Sub Road map steps.
Please help me out in this.
Thanks in Advance,
Shravan Varma

Substeps are not shown automatically, they are to be enabled at runtime .
See in page 35/36 adding/activating substep
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0d500f5-5205-2e10-43a6-dd023a5d0818?QuickLink=index&overridelayout=true

Custom Road Map step in Annual Enrollment not clickable

Problem Describtion: In our Annual Enrollment, AE,(via ESS) we had introduced three additional road map steps. Application is working absolutely fine. But there is a small catch.
In standard Annual Enrollment (AE) application I can navigate to next step by clicking on the Road Map itself. But this is not happening for the customized road map step i.e. I can not navigate to next step by simply clicking on it.
Any ideas why this is happening?
Please let me know if more information is needed to fully understand the issue.
Cheers!
Aditya

Problem Describtion: In our Annual Enrollment, AE,(via ESS) we had introduced three additional road map steps. Application is working absolutely fine. But there is a small catch.
In standard Annual Enrollment (AE) application I can navigate to next step by clicking on the Road Map itself. But this is not happening for the customized road map step i.e. I can not navigate to next step by simply clicking on it.
Any ideas why this is happening?
Please let me know if more information is needed to fully understand the issue.
Cheers!
Aditya

Europe Road Maps

I don't suppose there are any eBooks that are good quality road maps of European countries like those provided by Michelin. Because most of my iPad use will be off line (in the car) I cannot rely on maps requiring an Internet connection. I have a 3G iPad pre-ordered so can't browse the Apple bookstore myself. Would be a cool use, if available.

Hi Bill,
Yes, that's my intended approach. This year will be the first time I try it.
Sim's are easy to cut, at least with a decent pair of scissors. The risk is making sure you don't cut into the etched area. That's an issue of cutting in a straight line. If I mess up, I'll go back to the TIM shop and ask for another one. They may charge €5 for another one or may give me one on the house, depending on how much interest they have in the iPad. There's a margin of error around the etched area. I trimmed a sim years ago as it was a bit too big for my phone. It was a snap. Not the major trim a microsim requires but follow a line and it should be ok. For a template, I'll use the adaptor card, print out a few copies of the template and maybe pack a bit of 2-sided tape. Again, this will be a first time for me.
As with any wireless option, there are tons of prepaid plans. What we normally do for the phone is a €3/week plan that gives us unlimited calls in Italy and free incoming calls and sms (don't recall the cost per sms, minor). We sms out of the country and ask people to call us back. We're always with friends so being able to call within Italy is important for us. We usually do 3 or 4 countries so we get a country card for each one as the multi-country cards can get expensive.
We've never done data but every plan I've looked in a few European countries is €25 to €40 for a month. The TIM offer I know of charges €9 for a month, 100 hours data and €2/hour if I go over the 100 hour limit. To add a voice option to it is probably not much cost but I don't know. There are frequently no activation fees. If there are, they're not much, <€10. For me this is fine for email and a few needed web searches.
I also hope the MotionX gps is out by the time I leave in July. Its supposed to be out with the introduction of the 3G model.
I hope this will do it as it's about all I know at the moment. We are both in unchartered territory.

Implementation road map

can some one pls guide me to an implementation road map for my first SAP FI project. thnx

Hi,
Normally SAP Projects are Implementation,support and upgradations and rollouts.In Implementation Project most of the companies following ASAP methodology if you follow the sap guide lines they devided project into 5 phases.1)
Project preparation:Here Project will be Kick Off happen Client management and Project Management and they will do the Planning for whole project
2)Business Blue print:Here we will study the clients Business process and keep on discussing for better understanding of Busines Process.In this phase we will be giving SAP Overview sesssions by each module to Process owners and core team.Core team will prepare the AS-IS document it replica their present business based upon that Consultants will prepare TO-Be document it replicates where its addressing in SAP System.After Taking sign Off from client configuration will start the consultants in Development system.
In this phase consultant will give the on the job training to core team for better understanding of SAP terminology and futures of SAP
3.Realisation:Configuration will be start the consultatns as per the BPD(Business Process document)After completing the configuration in development system they will be transport to Quality system for testing the data once testing is confirm from the consultants,test scrips will be prepared and give its to core team for testing the scenoires.
Normally in sap testing are unit testing,system testing,system integration testing,UAT(User Accepting Testing)
4)After completing Testing Phase any final configuration any unsolved issues will be close this phase.In this phase consultans will give the master data templates to core team for uploading of master datas and transaction datas from legacy system to sap system for this we will plan the cut off data.
5)Go Live and suport its the continuous process.

XSLT mapping issue in parent child relation

Hi Guys,
i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
IDoc structure is as below
<ZLOIPRO1>
<E1AFKOL>
 <A></A>
 
 <E1RESBL>
 <MATNR>1</MATNR>
 <CHARG>1</CHARG>
 <ZSBL>
 <MTART>ABC</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>2</MATNR>
 <CHARG>2</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>3</MATNR>
 <CHARG>3</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
</E1AFKOL>
</ZLOIPRO1>
As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
I hope i am clear. Please let me know if any solution for this.

Hi,
Try this
<xsl:if test="./ZSBL/MTART == 'ZHA1'">
<xsl:for-each select="./E1RESBL">
<MATNR>
 <xsl:value-of select="./MATNR"/>
</MATNR>
<BATCH>
 <xsl:value-of select="./CHARG"/>
</BATCH>
</xsl:for-each>
</xsl:if>
You might need to do some changes in the above.
Thanks,
Prakash

EA4500 – Smart Wi-Fi interface and Windows Network Map issues

I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

Credit memo and MAP issue

Hello Guru's
I have 2 issues, and i am unable to understand the system logic for the same
Issue 1:-
We have an Intercomapny scenario
sequence of transaction is as follows
1. Create Return purchase order (document type NB) - Intercompany purchase
2. Post return goods receipts - movement type 161
3. Post credit memo with respect to return purchase order
4. Cancel the movement type 161 - using 161 movement type
System allows me to cancel the document created using 161 movement type
Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
Issue 2:-
I have a strange MAP issues which is flactuating very drastically
the scenario is as follows
Store stock is 10 ea, stock value is 1000, MAP is 100
DC map is 25
When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775)
Please advise if there is any way we can control this behaviour
I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
Appreciate if you can guide me to help
Regards
Amit

Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards,

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Mapping issue - if value matches on of several conditions

Hi champs,
I have a mapping in PI 7.1 of an invoice-xml to a INVOIC02-idoc.
I am mapping the invoice sums to E1EDS01-segments and just want to map five of several qualifiers. So I have set up a mapping for the qualifier field SUMID that just maps those five qualifiers, and map the SUMME-field from inbound message as it is.
Now it shows that our vendors send more than those five qualifiers I have in my mapping. Since I don´t have any control of the SUMME-field all seven values get mapped into the Idoc (generating seven E1EDS01-segments), but only the five segments with my mapped SUMID get the SUMID-field. So I get in total seven E1EDS01 segments in which I get only the SUMME in two of them.
So my question is: Are there any pretty ways to handle this kind of mapping issues besides using a lot of equalS, if and or?
I would like to be able to say (in as simple a function as possible) that if qualifier in field A is X, Y or Z then map the value in field B to SUMME. How do I do that? BTW I am not a java-programmer so advanced java-codes are not a good way for me to handle it.
regards,
Glenn

Write an UDF with this code:
public void <UDFNAME>(String <FieldName>,Container container){
If (<FieldName> == "X" || <FieldName> == "Y" || <FieldName> == "Z"){
return <FieldName>;
Edited by: spantaleoni on Mar 16, 2011 4:04 PM

Mapping issue with context again

I again need help with a mapping issue. I dont know how to handle the contexts to get this working in the xi graphical mapping tool. I have previously logged a question regarding this structure but the requirements have now changed.
I have a source document that has multiple delivery line items and for each delivery line item, there are multiple handling units. Each handling unit contains the line number of the delivery line item it belongs to. This structure has been simplified below.
Source Sample
<DOCUMENT>
<DELIVERY_LINEITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</DELIVERY_LINEITEM >
<DELIVERY_LINEITEM >
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</DELIVERY_LINEITEM >
<HANDLING_UNITS>
<HU_LABEL>123</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>456</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>789</HU_LABEL>
<HU_ITEM>
<LINENUMBER>20</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
</DOCUMENT>
Source Structure
DOCUMENT 1..1
DELIVERY_LINEITEM 1..unbounded
LINENUMBER 1..1
MATERIAL 1..1
HANDLING_UNITS 1..unbounded
HU_LABEL 1..1
HU_ITEM 1..1
LINENUMBER 1..1
In the target structure, I need to output each handling unit along with the corresponding DELIVERY_LINEITEM material. Target structure has been simplified below:
Target Sample
<DOCUMENT>
<ROW>
<PACKAGING>
<HU_LABEL>123</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>456</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>789</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</PACKAGING_ITEM>
</ROW>
</DOCUMENT>
Target Structure
DOCUMENT 1..1
ROW 1..unbounded
PACKAGING 1...1
HU_LABEL 1..1
PACKAGING_ITEM 1..1
LINENUMBER 1..1
MATERIAL 1..1
Note, 1 ROW in the target structure = 1 HANDLING_UNITS from the source structure.
Can anyone help me to achieve this? I do not know how to map the relevant DELIVERY_LINEITEM\MATERIAL from the source structure to the target structure.

JM,
Please find the solution. Reply back if it helps or not
http://www.flickr.com/photo_zoom.gne?id=1045178998&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179010&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179022&size=o
Results :http://www.flickr.com/photo_zoom.gne?id=1045179134&size=o
Code used:
for(int j=0;j<Handling_Linenum.length;j++)
for(int k=0;k<Delivery_Linenum.length;k++)
if(Handling_Linenum[j].equals(Delivery_Linenum[k]))
result.addValue(""Material[k]"");
result.addContextChange();
Best regards,
raj.

How to set the color for road map steps

hi all,
my requirement is like ,whenever i select my step in a roadmap it has to be set in yellow color and others has to be in default color.
thanks,
Siva.

Hi......
Its Very Simple......
Create an action for the road map.
for example..... if you have three step in it....
by default the first step will be in active only...
ie., Yellow colour
if you click the second step and it should be active means.... if you have to create a event....in the property of the Roadmap
Create the on action select event....
in that event.....
try to use this code.... based on your scenario.....
set context data
    DATA: road_node TYPE REF TO if_wd_context_node,
          road_data TYPE if_componentcontroller=>element_roadmap.
    road_node = wd_context->get_child_node( 'ROADMAP' ).
    road_data-step = step.
    IF step = 'CHOOSE'.
      road_data-prev_enabled = abap_false.
    ELSE.
      road_data-prev_enabled = abap_true.
    ENDIF.
    IF step = 'END'.
      road_data-next_enabled = abap_false.
    ELSE.
      road_data-next_enabled = abap_true.
    ENDIF.
    road_node->set_static_attributes( road_data ).
navigation
    wd_this->fire_navigate_evt( step ).
Hope this will help you
Thanks & reagrds
Raja

Solman Road Map Issue

Similar Messages

Maybe you are looking for