SOLMAN_SETUP: browser doesn't react on buttons pressing
Hi all.
We are configuring SAP SM 7.1 SP4
When I start the transaction SOLMAN_SETUP and IE window opens - I can't do anything. I can see the first overview page, but when i press on navigation menu or others links/buttons - nothing happens.
What can it be?
Thanks.
Srikishan D wrote:
Hi,
>
> Please check this thread:
>
> Solution Manager 7.1 SP4: Session Timeout during SOLMAN_SETUP
>
> I faced a similar issue, but got a time out error too before the screen becomes unresponsive.
>
> Perhaps a kernel update, ITS update or the note mentioned in the thread should solve the issue.
>
> Regards,
> Srikishan
Hi, Srikishan D.
Thank you for such a quick answer.
We do not have any pop-up window but will try to follow your steps.
Similar Messages
-
ipod nano 6 gen hangs when turning off the backlight. That is, it does not respond to button presses on the touch screen. He also has just a white screen instead of the desktop display. Tried to rearrange the screen from another Ipod nano, but nothing came of it - all the same ... What should I do?
Hi Rc_Drifter,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano. Restoring the device may resolve the backlight issue as well.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I hope this information helps ....
- Judy -
Most of the time, menu button deosn't react at all, no matter hom many times I press it, in home screen mode, and it takes more then 10 seconds to press and hold for multitask menu to appear.
I already have the latest software installed.
Help anybody ?I have restored factory settings, the process went all the way trough, but it didn't solve the problem... I had no applications running in the background, or 3rd party themes, so i guess it's the hardwear issue. As I was afraid, I'm gonna have to take it for repair...
Intrestingly, the same situation is with the green button... Only the red one is vivid and reacts in a matter of second..
The green one either doesn't react at all, or reacts once in a ten presses.
As for GPRS, GPS, WiFi, camera, speakers, keyboard, everything works just perfect..
I'll report probably in two weaks, since that's the amount of time it usually takes for service in Serbia...
Damn it !
Thank you anyway ! -
When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first
Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
Thanks so much.
Annick -
What should i do if my ipod doesn't light up after pressing the main button on the front?
What should i do if my ipod touch doesn't light up after pressing the main button on the front of the screen?
and also what should i do if i am unable to connect my ipod too the internet over wi-fi?Perhaps your iPod is turned Off? Try pressing the On/Off switch on the top side until the Apple logo appears on the screen.
Regarding WiFi problems read the following:
http://www.apple.com/support/ipodtouch/assistant/wifi/
http://support.apple.com/kb/TS1398 -
My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol
Hi Kappy Thanks for your answer. I did a reboot on my Macbook as suggested and this operation is going on non stop for 14 hours and on the screen always appears the same message that you can see in the picture in attachment. Any ideas?
-
I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?
Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking. -
"iPhone 5" sometimes doesn't wake up when pressing on the start or power buttons
Hello Everyone,
I'm facing a little problem with my new iPhone 5.
When it goes into sleep, sometimes doesn't wake up after pressing on the start or power buttons, and I have to wait 5 to 15 seconds until it is ON again.
Do you have any idea Why is that?
Regards,
WilliamHi William,
There is a section in this article that troubleshoots when a button is slow to respond:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically, this section:
Buttons and Switches
The Home button is slow to respond
Cheers!
- Ari -
How can I reset a locked ipad that doesn't react anymore?
Hey guys!
i have a problem:
Yesterday all of a sudden my iPad didn't work properly anymore. At first it was flashing ins stripes with different colours. I tried to fix it by shutting the iPad down, but since it was flashing to much it was not possible to click on "shut down". Therefore i just locked it.
After a while I wanted to try again, but as i pressed the home button, the screen got a little lighter, but it didn't turn completely on. (The screen was almost black and you couldn't see any buttons or anything else). And now it even stays completely black and doesn't react to anything anymore.
I wanted to reset the iPad to get to know if it's a hardware or a software problem, but it is locked with a code and since it's not reacting anymore i can't enter it.
By now I've also never synchronised my iPad with my computer.
What can I do? Does anyone have an advice for me?
How can I reset my iPad without entering the Code in the iPad itself?
Thank you for your help everybody!Hopefully you should be able to reset your iPad, therefore try this: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
The Apple logo ought to appear after about 10 seconds.
If you don't see the Apple logo, then this could be bad news.
Normally, the following instructions will resolve a forgotten passcode:
http://support.apple.com/kb/HT1212
But if you can't see anything on the screen, then it's bad news again.
If you have never synced your iPad with iTunes nor with iCloud, then you won't have a backup of your iPad either. Yes, more bad news, because the data on your iPad is most likely lost.
Try to get at least some life back into your iPad in order to save the data of your device via a backup.
Good luck! -
How can we give a padding-right:28px; to a frame in firefox, while all the other browsers are supporting the padding style which firefox Mozilla browser doesn’t . can anyone help me on this.
That should be working.<br />
Can you post a link?
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25<br /> -
The iPhone went out and doesn't react on anything. What to do?
My Iphone 4 went out and doesn't react to any actions. I connect to the charger and occurs nothing. I press on the inclusion button, it doesn't react. + Power too doesn't react to combinations of the Home buttons.
did not help((((
Connect it to your computer ITunes starts and says that you can not synchronize with the siphon. only if sdet recovery. do recovery hangs on stage waiting for iphone and then gives an error 4005. already I don `t know what to do. -
my iPod touch doesn´t react to anything what I do. Theres just a black background and this white loading sign but it doesn´t move. can anyone help me? thank you!
Oh Guten Tag.
If your Home Button works, you should be able to reset - press the Home and Main button at the same time for 15 sec. Then press the main button for 2sec to have it restart.
Do what I said earlier:
I would advice you to go to the link I sent you above: https://selfsolve.apple.com/GetWarranty.do and ask for an exception.
I don't promise that they'll change it but they may, mainly if the problem of the Home Button is going on since more than half a year (still within the one year warranty) and you just explain that you did not know that you could have changed it at the time and now it's completely dead.
If you really want to recover all your stuff and are living in the US, you should go to the nearest Genius bar and see what they can do. -
-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
How to call a dynamic URL on 'button press' event, in MVC-based BSP
Hi,
My requirement is as below:
On selecting a row in table view, and pressing a button, I need to open a browser.
The Browser URL depends on the row selected.
The key field from table view, is added at the end of the URL string.
Shortly, I can say that, I am getting a value on row selection & want to pass it to button event.
In Views Section, there are 2 tags- (1)table view & (2)button.
Right now, I have put the code for getting the key field, in DO_HANDLE_DATA method.
In Button's OnClientClick method, I have called the Javascript to open the browser.
If I now write the code to concatenate the key field value to form the dynamic URL in 'OnClick' method,
it will be called only after the browser is opened.
(as OnClick event is executed only after OnClientClick event is executed)
Could anyone please tell me what event (and in which tag) can be used to solve this.
Is there any event which is triggered, as soon as the row is selected, & before the button press event is triggered ?
Would really appreciate responses made to this query.
Thanks,
Nisha Vengal.Hi Nisha,
The crux of your issue here is that you want to call the event triggered with onClick before calling the event triggered on onClientClick. This can be achieved by the following code in the function called on the onClientClick.
function fn_button()
htmlbSL(this,2,'b_row_selection:onInputProcessing()');
window.open("new_page",target="BLANK");
Here, fn_button is the javascript function called on button click, and b_row_selection is the event triggered on the onClick event of row selection.
Try this out and let us know if it works for you.
Regards,
Saurabh -
Sending an object from client to server always on button press
What I need is to send an object from client to server but I need to make server wait until another object is sent. What I have is the JFrame where you put the wanted name and surname, then you create a User object with these details and on button press you send this object to the server. I just can't hold the connection because when I send the first object, server doesn't wait for another button click and throws EOFexception. Creating the while loop isn't helpfull as well because it keeps sending the same object again and again. The code is here
public class ClientFrame extends JFrame {
private JButton btnSend;
private JTextField txfName;
private JTextField txfSurname;
public ClientFrame() {
this.setTitle(".. ");
Container con = this.getContentPane();
con.setLayout(new BorderLayout());
txfName = new JTextField("name");
txfSurname = new JTextField("surname");
btnSend = new JButton(new AbstractAction() {
@Override
public void actionPerformed(ActionEvent e) {
SSLSocketFactory f =
(SSLSocketFactory) SSLSocketFactory.getDefault();
try {
SSLSocket c =
(SSLSocket) f.createSocket("localhost", 8888);
c.startHandshake();
OutputStream os = c.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
InputStream is = c.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is);
boolean done = false;
while (!done) {
String first = txfName.getText();
String last = txfSurname.getText();
User u = new User();
u.setFirstName(first);
u.setLastName(last);
oos.reset();
oos.writeObject(u);
String str = (String) ois.readObject();
if (str.equals("rcvdOK")) {
System.out.println("received on the server side");
} else if (str.equals("ERROR")) {
System.out.println("ERROR");
//oos.writeObject(confirmString);
oos.close();
os.close();
c.close();
} catch (ClassNotFoundException ex) {
Logger.getLogger(ClientFrame.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
System.err.println(ex.toString());
btnSend.setText("send object");
con.add(btnSend, BorderLayout.PAGE_START);
con.add(txfName, BorderLayout.CENTER);
con.add(txfSurname, BorderLayout.PAGE_END);
this.pack();
setSize(200, 150);
setVisible(true);
public class TestServer {
public static void main(String[] args) {
try {
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(new FileInputStream(ksName), ksPass);
KeyManagerFactory kmf =
KeyManagerFactory.getInstance("SunX509");
kmf.init(ks, ctPass);
SSLContext sc = SSLContext.getInstance("TLS");
sc.init(kmf.getKeyManagers(), null, null);
SSLServerSocketFactory ssf = sc.getServerSocketFactory();
SSLServerSocket s = (SSLServerSocket) ssf.createServerSocket(8888);
printServerSocketInfo(s);
SSLSocket c = (SSLSocket) s.accept();
InputStream is = c.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is);
OutputStream os = c.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
boolean done = false;
User u;
while(!done){
u = (User) ois.readObject();
String confirmString = "rcvdOK";
String errorString = "ERROR";
if (u != null) {
System.out.println(u.getFirstName() + " " + u.getLastName());
oos.writeObject(confirmString);
} else if (u == null) {
oos.writeObject(errorString);
is.close();
s.close();
c.close();
} catch (Exception e) {
System.err.println(e.toString());
}Thanks for any help, btw this doesnt need to be via ssl, the problem would be the same using only http. Please anyone help me:)
Edited by: Vencicek on 7.5.2012 2:19
Edited by: EJP on 7/05/2012 19:53
Edited by: Vencicek on 7.5.2012 3:36Current code fails because it's sending still the same entity again(using while loop)No it's not. You are creating a new User object every time around the loop.
which makes the system freezeWhich means that you are executing network code in the event thread. Don't do that, use a separate thread. At the moment you're doing all that sending inside the constructor for ClientFrame which is an even worse idea: you can never get out of there to the rest of your client program. This is a program design problem, not a networking problem.
and doesn't allow me to set new parameters of the new entityI do not understand.
I need to find a way to keep Server running even when the client doesn't send any data and wait until the client doesnt press the send button again to read a new object.That's exactly what happens. readObject() blocks until data is received.
Maybe you are looking for
-
Cannot find file/exclamation point!!!
Some of my music in itunes will not play, it seems completely random which ones play and which ones decide not to. One day the song may play and the next day the exclamation point will appear beside the song when I try to play it. Please help, this i
-
Mapping the "fn" key to a key on an external extended keyboard
Is it possible to map the "fn" key found on Macbooks to a key (such as the RH Control Key) on the current Apple extended keyboard? I use an extended keyboard with my Macbook Pro and wish to have access to the fn functions like I do on the Macbook's k
-
hp pavilion dv6 7023 laptop with win7 preinstalled. while upgrading to win 8.1 pro through usb when it asks for the hard disk partition to install windows to..as i select any of my partition it gives error that windows cannot be installed on this par
-
JTabbed pane customize title on selection
Hi all i want to change the title font when a tab is selected.I add a ChangeListener to my JTabbed pane to intercept tab selection and to change font via html. I have some proble ex: if i click on tab4, it correctly change font but the tab2 take the
-
Hello, My problem has to do with JVM encoding. I have the following error: Error:th encoding of your Java VM is different from the OpenCms encoding Java VM file encoding: Cp1253 OpenCms encoding: ISO-8859-1 How can I change the Java VM encoding to mu