SOLMAN_SETUP - DIAGNOSTICS Prerequisites fails for BI_CONT

Hi,
We have installed a new Solman 7.0 EHP1 (with new SR1 DVD/media) and then updated it to SP27. SP27 patching has been done with the SPS stack - and this has automatically installed/updated new component ST-BCO and updated BI_CONT to 706 SP1.
During Post Installation configuration, under SOLMAN_SETUP, we have observed that "DIAGNOSTICS Prerequisites" step is failing with the message
Component BI_CONT: release 706 is incorrect, expected 704: see note 1274287
Component BI_CONT: SP level 0001 is incorrect, expected 6
As per SAP note 1274287, our system meets minimum system requirements for BI_CONT.
But not for ST-BCO as minimum requirements is - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
My questions are:
Any idea why the Diagnostics Prerequisites are still failing.
I can't find this patch anywhere in sap service marketplaceso any idea from where to download this.
Appreciate your views on this asap, please.
BR
Davinder

Appreciate your quick response. Following the recommeded Note -- solves my first problem - wow.. Thanks again for this.
Will really appreciate if you can clarify on my second query also, please-
"Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27" - our system meets all the prerequisites, except for the component ST-BCO - our system has ST-BCO 400 SP0.
But requirement is to have Support Packages 1 (SAPK-40001INSTBCO).... which i am not able to find out from SAP Service marketplace,
Any idea how this can be downloaded, please
Requirements with component ST400 for SP27
    o  Solman 7.0 SP27 ABAP-Stack:
       -  Support Package Stack 08 for SAP WEB AS 7.01 AS ABAP
       -  Support Package 08 for PI_BASIS 701 (SAPK-70108INPIBASIS)
       -  Support Package 08 for SAP_ABA 701 (SAPKA70108)
       -  Support Package 08 for SAP_BASIS 701 (SAPKB70108)
       -  Support Package 08 for SAP_BW 701 (SAPKW70108)
       -  Support Package 19 for CPRXRPM 400 (SAPK-40019INCPRXRPM)
       -  Support Package 22 for SAP_AP 700(SAPKNA702)
       -  Support Package 18 for BBPCRM 500 (SAPKU50018)
       -  Support Package 07 for CRMUIF 500 (SAPK-50007INCRMUIF)
       -  Support Package 01 for BI_CONT 706 (SAPK-70601INBICONT ?)
       -  Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
       -  Support Package 27 for ST 400 (SAPKITL437)
       -  Support Package 04 for ST-PI 2008_1_700 (SAPKITLRD4)
       -  Support Package 00 for ST-A/PI 01N_700SOL (SAPK-01NS2INSSA)
       -  Minimum Support Package 24 for ST-ICO 150_700 (SAPK-1507OINSTPL)
       -  Minimum Support Package 07 for ST-SER 701_2010_1 (SAPKITLOS7)
BR
Davinder

Similar Messages

  • Oracle 11g upgrade prerequisite fails for all the values

    Hi,
    We have planned Oracle upgrade from 10.2.0.4 to 11.2.0.2. We have
    followed the upgrade guide Database Upgrade Guide "Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". Our OS versionis HP-UX ia64 B.11.31. According to the upgrade guide we have set all the environment vairables. And started the Oracle 11.2.0.2 software installation prerequisite with the command " ./RUNINSTALLER -check " The result of the prerequisite check was giving the all the parameters are failed. But the parameters like Physical memory, orasid user also showing failed eventhough we are having 16 GB of physical memory & we logged on
    with orasid it self and all the parameters are showing failed.
    We have check the Oracle metalink note#169706.1,  According to the note we have valid version of HP-UX 11.31 and some patches are already installed and some of them are not installed. But the prerequisite check showing all the patches are in failed state irrespective of some installed patches.
    Regards,
    Sreekanth

    Hi there
    For DB upgrades to 11g there are couple technical notes .
    SAP Note No. 1431793
    SAP Note No. 1431797
    SAP Note No. 1431800
    Hope them can be useful
    BR
    Venkat

  • SolMan_Setup - Check Prerequistes fails

    When running "Managed System Configuration ->Check Prerequisites" job SMSSETUP:AGS_MS_CHECK_PREQ fails with error message "Incorrect call of RSTG".
    Job Log:
    Date       Time     Message text                                                                           Message class Message no. Message type
    11.02.2012 12:02:06 Job started                                                                                00           516          S
    11.02.2012 12:02:06 Step 001 started (program RAGS_SISE_STEP_JOB, variant &0000000000017, user ID RBECKER)      00           550          S
    11.02.2012 12:02:06 Imported p_stepid:AGS_MS_CHECK_PREQ                                                         00           001          S
    11.02.2012 12:02:06 Imported p_sp:E445AA90817AB01274A39A5689330703BEAEAA01                                      00           001          S
    11.02.2012 12:02:06 Imported p_sp_tsk:N73ABAP$N73DATABASE                                                     00           001          S
    11.02.2012 12:02:06 Imported p_exepar:ALL                                                                       00           001          S
    11.02.2012 12:02:06 Check Prerequisites started                                                              SISE_CONF       189          S
    11.02.2012 12:02:06 Execute STEP_ID:AGS_MS_CHECK_PREQ                                                           00           001          S
    11.02.2012 12:02:06 Execute activity: Diagnostics Prerequisites for system N73~ABAP                          SISE_CONF       199          S
    11.02.2012 12:02:07 Incorrect call of RSTG                                                                      00           023          A
    11.02.2012 12:02:07 Job cancelled                                                                               00           518          A
    Anybody an idea how to solve this problem?
    Best regards
    Roman

    Hello!
    Have you checked if the managed system actually fulfills the diagnostic prerequisites??
    for solman 7.1
    Note 1478974 - Diagnostics in SAP Solution Manager 7.1
    Note 1483508 - Solution Manager 7.1: Root Cause Analysis pre-requisites
    for solman 7.01
    Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP28
    Cheers,
    Diego.

  • Manager System does not fulfill the Diagnostics prerequisites

    Hi experts,
    I am in Solution Manager 7.1 SP11, step Managed Systems Configuration .The Managed system is one Java application server (Portal).
    In step 2: Check Prerequisites I am getting error:
    Managed system <SID>~JAVA does not fulfill the Diagnostics prerequisites
    ERROR->Cannot get Software Components installed on Solution Manager
    More info->Method call failed; the method GET_SC_67838200100200019681 of the class MANAGED_PREREQ_CHECK does not exist
    Action->Check the current SP Software Component list on SAP Service Marketplace: http://service.sap.com/sap/bc/bsp/spn/swdc/sps/default.htm?pvnr=01200314690900002795
    Check  Context->Managed systems prerequisite | Diagnostics prerequisite Java | SYSTEM =<SID>~JAVA
    detail
    No More Info for this problem!
    Who can give some advise to solve this ?
    Regards
    Leo

    Hi Leo
    Check this note & this should help this issue
    , 2001501 - Cannot get Software Components installed on Solution Manager
    Looks like known issue, ID 67838200100200019681 shows relevant.
    regards
    Swami

  • Managed system SOL~JAVA does not fulfill the Diagnostics prerequisites

    Hi Experts,
    I am getting error error while doing manged System configuration in Solman through solman_setup.In step 2 during prerequisite check I am getting error "Managed system SOL~JAVA does not fulfil the Diagnostics prerequisites" for java and abap too. In LMDB I checked the Host assigned to this technical system.Please refer screen shot for the entry. Please suggest where I am committing  mistake.
    Thanks
    Aditya

    Thanks Karthik & Kamil,
    During SLD preparation in System Preparation phase I had updated the CR/CIM of SLD but I committed a mistake that I applied the CR (From 8.x to 9.0) and then (From 9.x to 9.y) without doing it sequentially from (1.x to 2.0) then from (2.x to 3.0) and so on as per 669669. It didn't give any error.As of now it is showing CIM1.6.38 and CR 9.13. Is my current problem related to this?
                                                                                                                                                    Current error message is saying (The definition of Technical System 'SOL~ABAP' is not correct: 'SOL~ABAP': Technical System must be installed onat least one Host.) similarly for Java (The definition of
    Technical System 'SOL~JAVA' is not correct: 'SOL~JAVA': Technical System must be installed on at least one Host.).In LMDB I can see in technical system Abap and Java has host assigned to it.Plz suggest.
    Thanks
    Aditya Roushan

  • Installing sccm 2012 error -prerequisites failed sql

    Hi
    While I'm start installing the SCCM 2012 R2 in windows 2008 R2 ,
    SQL version : Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)   Sep 21 2011 22:45:45   Copyright (c) 1988-2008 Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (VM)
    I'm getting the error below  , Please advise what is the error below
    INFO: Attempting to load resource DLL...  $$<Configuration Manager Setup><09-17-2014 16:50:26.223+420><thread=2800 (0xAF0)>
    Failed to connect HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL registry key for reading on SQL Server [SCCM2012.DDS.com].  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    WARNING: failed to retrieve port number for SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    WARNING: failed to retrieve port number for SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    INFO: Registered type SCCM2012.DDS.COM MASTER for SCCM2012.DDS.com master  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    INFO: Registered type SMS Master for SCCM2012.DDS.com master  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    INFO: Registered type SCCM2012.DDS.COM CM_CHK for SCCM2012.DDS.com CM_CHK  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    INFO: Registered type SMS ACCESS for SCCM2012.DDS.com CM_CHK  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    INFO: Attempting to load resource DLL...  $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: SCCM2012.DDS.COM MASTER.  $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
    ERROR: Failed to connect to SQL Server 'master' db.  $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
    INFO: Prerequisite rules for primary site fresh installation are being run.  $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
    INFO: Verifying Configuration Manager Active Directory Schema Extensions.  $$<Configuration Manager Setup><09-17-2014 16:51:29.808+420><thread=2956 (0xB8C)>
    INFO: Found DS Root:CN=Schema,CN=Configuration,DC=DDS,DC=com~  $$<Configuration Manager Setup><09-17-2014 16:51:29.839+420><thread=2956 (0xB8C)>
    INFO: Verifying Configuration Manager Active Directory Domain Function Level.  $$<Configuration Manager Setup><09-17-2014 16:51:29.839+420><thread=2956 (0xB8C)>
    INFO: Found Domain Function level: 4~  $$<Configuration Manager Setup><09-17-2014 16:51:29.855+420><thread=2956 (0xB8C)>
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)~  $$<Configuration Manager Setup><09-17-2014 16:51:29.870+420><thread=2956 (0xB8C)>
    Checking runtime v2.0.50727...~  $$<Configuration Manager Setup><09-17-2014 16:51:29.870+420><thread=2956 (0xB8C)>
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.~  $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
    Checking runtime v4.0.30319...~  $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.~  $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
    Supported WSUS version not found~  $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
    INFO: Checking Installed SMS componants on:SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
    CTool::GetServiceAccount : Failed to get Service [MSSQLSERVER] start account on server [SCCM2012.DDS.com]. Win32 Error = 1060.  $$<Configuration Manager Setup><09-17-2014 16:51:29.979+420><thread=2956 (0xB8C)>
    ERROR: Failed to get sql service account, Server:<SCCM2012.DDS.com>, instance:<>.  $$<Configuration Manager Setup><09-17-2014 16:51:29.979+420><thread=2956 (0xB8C)>
    INFO: 'User State Migration Tool' component of ADK is installed.  $$<Configuration Manager Setup><09-17-2014 16:51:29.995+420><thread=2956 (0xB8C)>
    INFO: File C:\Windows\smstsvc_test_4.exe does not exist. No zapping needed.  $$<Configuration Manager Setup><09-17-2014 16:51:29.995+420><thread=2956 (0xB8C)>
    INFO: test loop count:0.  $$<Configuration Manager Setup><09-17-2014 16:51:36.235+420><thread=2956 (0xB8C)>
    INFO: smstsvc_test_4 Return result <7>  $$<Configuration Manager Setup><09-17-2014 16:51:36.235+420><thread=2956 (0xB8C)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: SMS Master.  $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: SMS Master.  $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: SMS Master.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    ERROR: The current user does not have administrative rights on computer: SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    ERROR: Prerequisite checking stopped on this machine.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    INFO: Checking Windows Cluster.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    INFO: WMI namespace root\MSCluster not exists on SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    INFO: 'Windows Deployment Tools' component of ADK is installed.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    INFO: 'Windows PE' component of ADK is installed.  $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: TEST_ROLE_ACCESS.  $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
    *** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.  $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
    *** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).  $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
    *** Failed to connect to the SQL Server, connection type: TEST_ROLE_ACCESS.  $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
    INFO: File C:\Windows\smstsvc_test_5.exe does not exist. No zapping needed.  $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
    INFO: test loop count:0.  $$<Configuration Manager Setup><09-17-2014 16:57:53.186+420><thread=2956 (0xB8C)>
    INFO: smstsvc_test_5 Return result <-1>  $$<Configuration Manager Setup><09-17-2014 16:57:53.186+420><thread=2956 (0xB8C)>
    INFO: Checking Windows Cluster.  $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~  $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
    INFO: WMI namespace root\MSCluster not exists on SCCM2012.DDS.com.  $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
    INFO: File C:\Windows\smstsvc_test_6.exe does not exist. No zapping needed.  $$<Configuration Manager Setup><09-17-2014 16:57:55.432+420><thread=2956 (0xB8C)>
    INFO: test loop count:0.  $$<Configuration Manager Setup><09-17-2014 16:58:00.611+420><thread=2956 (0xB8C)>
    INFO: smstsvc_test_6 Return result <0>  $$<Configuration Manager Setup><09-17-2014 16:58:00.611+420><thread=2956 (0xB8C)>
    INFO: SCCM2012.DDS.com is a 64 bit operating system.  $$<Configuration Manager Setup><09-17-2014 16:58:02.639+420><thread=2956 (0xB8C)>
    Robert

    ERROR: The current user does not have administrative rights on computer: SCCM2012.DDS.com
    So make sure that the user perfoming the installation AND the computer account if the site server is local admin on the remote server plus sysadmin in SQL.
    Torsten Meringer | http://www.mssccmfaq.de

  • Event code: 4005 Event message: Forms authentication failed for the request. Reason: The ticket supplied was invalid.

    When i was run my web application in everyday morning(after that issue was not reproduced), it was immediatly redirected to logout page
     while i perform any task after login.Session_end function was called unfortunately.
    Event log as follows 
    Event code: 4005 
    Event message: Forms authentication failed for the request. Reason: The ticket supplied was invalid. 
    Event time: 10/10/2014 10:36:33 AM 
    Event time (UTC): 10/10/2014 5:06:33 AM 
    Event ID: a268f3dd45da406dadd78773a858067f 
    Event sequence: 4 
    Event occurrence: 1 
    Event detail code: 50201 
    Application information: 
        Application domain: 463c736b-2-130573911817035712 
        Trust level: Full
    The output while session_end() was called is as follows
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Program Files\Common Files\Microsoft Shared\DevServer\11.0\WebDev.WebServer40.exe'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\WebDev.WebHost40\v4.0_11.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost40.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Windows.Forms.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Caching\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Runtime.Caching.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Build.Utilities.v4.0\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.Build.Utilities.v4.0.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
    A first chance exception of type 'System.ArgumentNullException' occurred in System.Core.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.RegularExpressions\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.RegularExpressions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.3ly5lssc.dll', Symbols loaded.
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in System.Web.dll
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
    'iexplore.exe' (Script): Loaded 'Script Code (Windows Internet Explorer)'.
    The thread '<No Name>' (0x2178) has exited with code 0 (0x0).
    The thread '<No Name>' (0x22c0) has exited with code 0 (0x0).
    The thread '<No Name>' (0x3c4) has exited with code 0 (0x0).
    The thread '<No Name>' (0x2198) has exited with code 0 (0x0).
    The thread '<No Name>' (0x19e0) has exited with code 0 (0x0).
    The thread '<No Name>' (0x21c8) has exited with code 0 (0x0).
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.yz9nltrj.dll', Symbols loaded.
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Deployment\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Deployment.dll'
    A first chance exception of type 'System.Deployment.Application.InvalidDeploymentException' occurred in System.Deployment.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
    WebDev.WebServer40.exe Information: 0 : [Source : ASP.global_asax ] - <No Message>
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Mobile\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Mobile.dll'
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml.Hosting\v4.0_4.0.0.0__31bf3856ad364e35\System.Xaml.Hosting.dll'
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Entity\v4.0_4.0.0.0__b77a5c561934e089\System.Web.Entity.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Design\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Design.dll'
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'A_7ac34899_0878_4547_ab89_13333f2a2da8'
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_2vnmaiqi.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_axfwmnjt.dll', Symbols loaded.
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\a9a217f9\93d383b9_47e4cf01\myapp.resources.dll'
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    The thread '<No Name>' (0x230c) has exited with code 0 (0x0).
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    Exception was thrown at line 3, column 25599 in http://localhost:51399/myapp/public/jquery-1.7.2.min.js
    0x800a139e - JavaScript runtime error: SyntaxError
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
    The thread '<No Name>' (0x258c) has exited with code 0 (0x0).
    WebDev.WebServer40.exe Information: 0 : [Source : ASP.login_aspx ] - <No Message>
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.ServiceModelSink\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.ServiceModelSink.dll'
    WebDev.WebServer40.exe Information: 0 : [Source : wpcsLibrary.wpcsUserManager.UserAuthenticate ] - <No Message>
    A first chance exception of type 'System.IO.IOException' occurred in mscorlib.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Net.Http\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Net.Http.dll'
    WebDev.WebServer40.exe Information: 0 : [Source : ] - <No Message>
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
    WebDev.WebServer40.exe Information: 0 : Entering method call dbUtilities
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll'
    WebDev.WebServer40.exe Information: 0 : [Source :dbUtilities ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : Exiting method call dbUtilities
    WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
    The thread '<No Name>' (0x24dc) has exited with code 0 (0x0).
    WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
    A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
    A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
    A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
    WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
    WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
    The thread '<No Name>' (0x2590) has exited with code 0 (0x0).
    WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
    WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
    WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Users\E849324\myweb\Finalview\NCI\Source\WIN-PAK 2.0 R5\SourceCode\WPCSWEB\myapp\bin\DoorApp.app', Symbols loaded.
    WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
    WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
    WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
    WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
    The thread '<No Name>' (0x1f04) has exited with code 0 (0x0).
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
    WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Instance.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.set'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    The thread '<No Name>' (0x26c0) has exited with code 0 (0x0).
    Step into: Stepping over method without symbols 'string.Concat'
    Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
    WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Clear'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.List'
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'string.Concat'
    Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
    WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.IconImage.get'
    Step into: Stepping over method without symbols 'string.IsNullOrEmpty'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Label'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Name.get'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Text.set'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
    Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Description.get'
    Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.ToolTip.set'
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over method without symbols 'string.Concat'
    Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
    WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
    Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.Add'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.ToArray'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].set'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
    Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
    Step into: Stepping over method without symbols 'string.Concat'
    Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
    WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
    Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
    Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
    Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
    Step into: Stepping over method without symbols 'System.Web.UI.HtmlControls.HtmlControl.Style.get'
    Step into: Stepping over method without symbols 'System.AppDomain.Flags.get'
    Step into: Stepping over method without symbols 'string.Concat'
    Step into: Stepping over method without symbols 'System.Web.UI.CssStyleCollection.Add'
    The thread '<No Name>' (0x1b04) has exited with code 0 (0x0).
    WebDev.WebServer40.exe Information: 0 : Entering method call ASP.site_master
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
    WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
    WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
    WebDev.WebServer40.exe Information: 0 : Exiting method call ASP.site_master
    A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
    A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
    'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'

    Please post this question to the forums at http://www.asp.net.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • Best Buy 100% Price Match Guarantee FAIL for Elite Plus member!!!

    So during the Black Friday weekend I purchased a Dyson vacuum at a store.  I understand that Best Buy does not match pricing DURING Black Friday weekend.  So on 12/15 Amazon had the vacuum on sale for $26 less than what I paid.  Again, this is not Black Friday weekend but the item was purchased over Black Friday weekend.  So I called in for Best Buy to match the price.  I spoke with someone who seemed like temp help.  It did not sound like she was in a call center and she didn't know much and seemed to be IM'n with someone to get answers.  After initially telling me they would not match the price because the item was purchased during Black Friday I explained that it was no longer Black Friday and Best Buy policy does not obsolve them from matching prices for the next 5-6 weeks (the return date is 1/15/2015) from all items purchased over Black Friday weekend.  If so, no one would buy during Black Friday.  She said she would submit the price match and I would get an email letting me know if it has been approved.  I was patient and waited 2 weeks and nothing.  I called back and was told that the price match department was swamped and to please be patient.  So I waited till today to call back for the return date is in 2 days and still no price match email.  I am now being told that Best Buy only matches their own pricing if not at the time of sale AND they only match the price that same day when they can confirm the price. (which makes sense)  I'm also being told my price match was never sent to the correct department so it has been sitting in case # purgatory for the past month.  Why is any of this my fault?!  I spend over $3500 per year, year after year and I'm supposed to get 'Elite' service.  I know more than the people I'm speaking with on the phone!  I called in with a legit lower price, waited patiently for Best Buy to match, have now spoken with 3 different reps, been told something different each time about the price match policy (every time they were wrong) and now I'm being told because it wasn't matched when they could confirm the price they won't match the price?!  What am I missing?!
    Total Price Match FAIL for Elite Plus member!!!  I can only image how people that aren't Elite are treated! :-)

    Dear iamkraz,
    Thank you for bringing us your business this holiday and for your continued loyalty to us as a My Best Buy Elite Plus customer. I am sorry if your recent experience has left you disappointed after the service you received. I would be happy to help clarify this for you.
    Per our Price Match Guarantee, “At the time of sale, we price match all local retail competitors (including their online prices) and we price match products shipped from and sold by these major online retailers: Amazon.com, Bhphotovideo.com, Crutchfield.com, Dell.com, HP.com, Newegg.com, and TigerDirect.com.” The only price match we would perform after the initial time of sale would be to a lower price in store or on BestBuy.com during your respective Return & Exchange period. You should have been provided with this as the reason for not receiving the price match when you were speaking with our support teams.
    My apologies for any confusion this caused. I would like to get some more details from you about the conversations you had so I may properly document this here at the corporate level for coaching and training. Please check your private messages by clicking on the envelope in the upper right-hand corner while you are logged into the forums.
    Regards,
    JD|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

    "[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
    After patches applied on patch Tuesday the database reports the above error. 
    All accounts are domain accounts and SQLServer uses Windows auth.
    DCDIAG show no errors
    All servers and DC have been restarted,
    Message in db log confirms the connection is being denied due to trust.
    Event log shows same rejection
    Protocols enabled: named pipes, tcpip, memory
    TESTS:
    PortQry: "
    TCP port 1433 (ms-sql-s service): LISTENING"
    Connect with domain admin accounts works from multiple clients systems to DB.
    Cannot connect with newly created domain admin account
    Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
    New standard user also fails to connect.
    NOTES:
    I removed the SSL patch and the IE security update to see if that was an issue.
    ¯\_(ツ)_/¯

    Has someone left the company or has an account of some nature been dropped/replaced?
    Please click "Mark As Answer" if my post helped. Tony C.
    Hi Tony,
    Srry but No.  We just installed the monthly updates.
    I went back and found I had missed removing a patch.  I missed the rollup for Windows Server 2003:
    Event Type: Information
    Event Source: NtServicePack
    Event Category: None
    Event ID: 4382
    Date:  3/12/2015
    Time:  12:26:04 PM
    User:  NETTEST\admin
    Computer: DATA1
    Description:
    Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
    After I removed that is still didn't work but after about five minutes it started working.
    I guess I ned to report that to MS after I research what might be changed to make the patch work.
    Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
    Thanks for replying.
    Well - maybe this will help someone else.
    Thanks again for replying Tony
    ¯\_(ツ)_/¯

  • Portmap translation creation failed for udp src inside dst inside

    Hi!
    I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
    My asa is a main router with addres 192.168.1.1
    UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
    Firewall and NAT on UC500 is disable
    UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
    My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
    the log says
    3
    Sep 07 2013
    00:21:49
    DC
    53
    PBXCUE
    32901
    portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
    I tried exempting uc500 subnets on ASA but that didn;t work.
    Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
    Please help! I am not familiar with CLI.
    I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
    I would be grateful for ideas.
    Lukasz
    global (inside) 1 interface
    global (outside) 101 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 101 0.0.0.0 0.0.0.0
    static (inside,outside) tcp interface https IIS https netmask 255.255.255.255  dns tcp 200 200 udp 200
    static (inside,outside) tcp interface www IIS www netmask 255.255.255.255  dns tcp 200 200 udp 200
    static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255  dns
    static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255  dns
    static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255  dns
    static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255  dns
    static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255  dns
    static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255  dns
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 x.x.x.x
    route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy

    Hello Julio!
    Thank you for your advice.
    I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
    Now I can see everything from all of my inside networks.
    I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
    I am only an enthusiast but my recent successes have given me apetite for more...
    I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
    I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
    access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
    My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
    access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
    access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
    access-list outside_access_in extended permit tcp any interface outside eq smtp
    access-list outside_access_in extended permit tcp any interface outside eq 8080
    access-list outside_access_in extended permit tcp any interface outside eq 23456
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
    access-list outside_access_in extended permit tcp any interface outside eq 13000
    access-list outside_access_in extended permit tcp any interface outside range 8001 8016
    access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
    access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
    access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
    access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
    access-list inside_access_in extended permit ip host IIS any
    access-list inside_access_in extended permit ip any any
    access-list inside_access_in extended permit ip host RBSTORE_NAS any
    access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
    access-list inside_access_in extended permit tcp any any eq 5432
    access-list inside_access_in extended permit tcp any host PBXCUE eq www
    access-list inside_access_in extended permit tcp host PBXCUE any eq www
    access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
    access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
    access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
    access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
    route print shows:
    and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
    How do I change it?
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0      192.168.2.1    192.168.2.126   4250
              0.0.0.0          0.0.0.0         On-link     192.168.1.240     21
          80.51.24.22  255.255.255.255      192.168.2.1    192.168.2.126   4251
            127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531
            127.0.0.1  255.255.255.255         On-link         127.0.0.1   4531
      127.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
          169.254.0.0      255.255.0.0         On-link     192.168.2.126   4506
      169.254.104.126  255.255.255.255         On-link     192.168.2.126   4506
      169.254.255.255  255.255.255.255         On-link     192.168.2.126   4506
        192.168.1.240  255.255.255.255         On-link     192.168.1.240    276
          192.168.2.0    255.255.255.0         On-link     192.168.2.126   4506
        192.168.2.126  255.255.255.255         On-link     192.168.2.126   4506
        192.168.2.255  255.255.255.255         On-link     192.168.2.126   4506
            224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531
            224.0.0.0        240.0.0.0         On-link     192.168.2.126   4506
            224.0.0.0        240.0.0.0         On-link     192.168.1.240     21
      255.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
      255.255.255.255  255.255.255.255         On-link     192.168.2.126   4506
      255.255.255.255  255.255.255.255         On-link     192.168.1.240    276
    ===========================================================================
    I am starting to feel like I am using a bit too much of your friendliness ...
    Best Regards and have a great day!
    Lukasz

  • VPN problem behind ASA5505 -regular translation creation failed for protocol 50

    Dear All,
    I have to connect behind my ASA5505 with an VPN klient to an other site.
    First time i got this failure.
    "Deny protocol 50 src inside:192.168.50.X dst  outside:x.x.x.x by access-group "acl_in" [0x0, 0x0]"
    Than I opened our inside (src 192.168.50.0) network  the UDP 500,4500 TCP 500,4500,10000 and ESP (dest x.x.x.x remote firewall ip).
    access-list acl_in extended permit esp host 192.168.50.0  host x.x.x.x eq isakmp
    access-list acl_in extended permit udp host 192.168.50.0  host x.x.x.x eq 500
    access-list acl_in extended permit eudp host 192.168.50.0  host x.x.x.x eq 4500
    etc.
    After that i could connect for the remote firewall with vpn client but i couldn't reach any PC1s on there side and ping gives back no anwser.
    Deny protocol 50 was solved but i got an other problem:
    "regular translation creation failed for protocol 50 src  inside:192.168.50.X dst outside:x.x.x.x"
    I found somewhere thet lines can help:
    crypto isakmp nat-traversal
    inspect ipsec-pass-thru
    But this wasn't usefull.
    I tried a many thing but i'm stuck.
    Could somebody help me what can i do to solve this problem?
    Thanks for all anwsers!

    The solution was the following for one IP!
    object network x.x.x.x                      (inside IP)
       host x.x.x.x                                  (inside IP)
       nat (inside,outside) static y.y.y.y     (remote IP)

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Process_order api - Validation Failed for Field Bill To

    I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
    For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
    Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
    Here is the procedure I have.
    PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
        CURSOR c_order_parts IS
          SELECT *
            FROM TEK_APEX.TEK_ORD_ORDER_PARTS
           WHERE ORDER_ID = p_order_id;
        TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
        v_order_parts t_parts;
        --Setup variables
        H_Op_Code      VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
        L_Op_Code      VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
        v_install_type VARCHAR2(25) := 'PTO';
        v_source_id    NUMBER;
        v_user_id      NUMBER;
        v_resp_id      NUMBER;
        v_app_id       NUMBER;
        v_debug        VARCHAR2(32767);
        v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
        v_apex_order   TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
        p_header_rec                    OE_Order_Pub.Header_Rec_Type;
        p_header_val_rec                OE_Order_Pub.Header_Val_Rec_Type;
        p_Header_Adj_tab                OE_Order_Pub.Header_Adj_Tbl_Type;
        p_Header_Adj_val_tab            OE_Order_Pub.Header_Adj_Val_Tbl_Type;
        p_Header_price_Att_tab          OE_Order_Pub.Header_Price_Att_Tbl_Type;
        p_Header_Adj_Att_tab            OE_Order_Pub.Header_Adj_Att_Tbl_Type;
        p_Header_Adj_Assoc_tab          OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
        p_Header_Scredit_tab            OE_Order_Pub.Header_Scredit_Tbl_Type;
        p_Header_Scredit_val_tab        OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
        p_line_tab                      OE_Order_Pub.Line_Tbl_Type;
        p_line_val_tab                  OE_Order_Pub.Line_Val_Tbl_Type;
        p_Line_Adj_tab                  OE_Order_Pub.Line_Adj_Tbl_Type;
        p_Line_Adj_val_tab              OE_Order_Pub.Line_Adj_Val_Tbl_Type;
        p_Line_price_Att_tab            OE_Order_Pub.Line_Price_Att_Tbl_Type;
        p_Line_Adj_Att_tab              OE_Order_Pub.Line_Adj_Att_Tbl_Type;
        p_Line_Adj_Assoc_tab            OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
        p_Line_Scredit_tab              OE_Order_Pub.Line_Scredit_Tbl_Type;
        p_Line_Scredit_val_tab          OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
        p_Lot_Serial_tab                OE_Order_Pub.Lot_Serial_Tbl_Type;
        p_Lot_Serial_val_tab            OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
        p_action_request_tab            OE_Order_pub.Request_Tbl_Type;
        l_header_rec                    OE_Order_Pub.Header_Rec_Type;
        l_header_val_rec                OE_Order_Pub.Header_Val_Rec_Type;
        l_Header_Adj_tab                OE_Order_Pub.Header_Adj_Tbl_Type;
        l_Header_Adj_val_tab            OE_Order_Pub.Header_Adj_Val_Tbl_Type;
        l_Header_price_Att_tab          OE_Order_Pub.Header_Price_Att_Tbl_Type;
        l_Header_Adj_Att_tab            OE_Order_Pub.Header_Adj_Att_Tbl_Type;
        l_Header_Adj_Assoc_tab          OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
        l_Header_Scredit_tab            OE_Order_Pub.Header_Scredit_Tbl_Type;
        l_Header_Scredit_val_tab        OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
        l_line_tab                      OE_Order_Pub.Line_Tbl_Type;
        l_line_val_tab                  OE_Order_Pub.Line_Val_Tbl_Type;
        l_Line_Adj_tab                  OE_Order_Pub.Line_Adj_Tbl_Type;
        l_Line_Adj_val_tab              OE_Order_Pub.Line_Adj_Val_Tbl_Type;
        l_Line_price_Att_tab            OE_Order_Pub.Line_Price_Att_Tbl_Type;
        l_Line_Adj_Att_tab              OE_Order_Pub.Line_Adj_Att_Tbl_Type;
        l_Line_Adj_Assoc_tab            OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
        l_Line_Scredit_tab              OE_Order_Pub.Line_Scredit_Tbl_Type;
        l_Line_Scredit_val_tab          OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
        l_Lot_Serial_tab                OE_Order_Pub.Lot_Serial_Tbl_Type;
        l_Lot_Serial_val_tab            OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
        l_ret_status                    VARCHAR2(200);
        l_msg_count                     NUMBER;
        l_msg_data                      VARCHAR2(200);
           --Email information
        v_email_address           varchar2(100);
           v_msg_text                varchar(1000);
           v_subject_text            varchar(1000);
           --Default line information
        v_item_id           NUMBER;
        v_contact_id        NUMBER;
        v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
        v_ship_to_org_id    oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
        v_sold_to_org_id    oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
        v_flow_status_code  oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
        FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
          RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
          v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
        BEGIN
          SELECT *
            INTO v_order
            FROM APPS.OE_ORDER_HEADERS_ALL
           WHERE ORDER_NUMBER = p_order_number;
          RETURN v_order;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_ORACLE_ORDER;
        FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
          RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
          v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
        BEGIN
          SELECT *
            INTO v_order
            FROM TEK_APEX.TEK_ORD_SALES_ORDERS
           WHERE ORDER_ID = p_order_id;
          RETURN v_order;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_APEX_ORDER;
        FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
          RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
          v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
        BEGIN
          SELECT ORDER_SOURCE_ID
            INTO v_source_id
            FROM APPS.OE_ORDER_SOURCES
           WHERE NAME = p_source_name;
          RETURN v_source_id;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_SOURCE_ID;
        FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
          RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
          v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
        BEGIN
          SELECT INVENTORY_ITEM_ID
            INTO v_item_id
            FROM APPS.MTL_SYSTEM_ITEMS
           WHERE SEGMENT1 = p_part_number
             AND ORGANIZATION_ID = p_org_id;
          RETURN v_item_id;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_ITEM_ID;
      BEGIN
        apps.mo_global.set_policy_context('S',3);
        apps.mo_global.init('XXTEK');
        BEGIN
          SELECT USER_ID
            INTO v_user_id
            FROM APPS.FND_USER
           WHERE USER_NAME = 'SYSADMIN';
        EXCEPTION
          WHEN OTHERS THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
        END;
        BEGIN
          SELECT RESPONSIBILITY_ID, APPLICATION_ID
            INTO v_resp_id, v_app_id
            FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
           WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
          --Set current user information
          fnd_global.apps_initialize (user_id      => v_user_id
                                     ,resp_id      => v_resp_id
                                     ,resp_appl_id => v_app_id);
        EXCEPTION
          WHEN OTHERS THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
        END;
        --Get the order information from Oracle and APEX
        v_apex_order := GET_APEX_ORDER(p_order_id);
        IF v_apex_order.ORDER_ID IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
        END IF;
        v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
        IF v_oracle_order.ORDER_NUMBER IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
        END IF;
        apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
        v_source_id := GET_SOURCE_ID('IMPORT');
        IF v_source_id IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
        END IF;
        /* ********** Gather Order Header********** */
        /* ********** Info.              ********** */
        OE_Order_Pub.Get_Order(p_api_version_number    =>      1.0,
                               p_init_msg_list         =>      FND_API.G_TRUE,
                               p_return_values         =>      FND_API.G_TRUE,
                               x_return_status         =>      l_ret_status,
                               x_msg_count             =>      l_msg_count,
                               x_msg_data              =>      l_msg_data,
                               p_header_id             =>      v_oracle_order.HEADER_ID,
                               p_header                =>      NULL,
                               x_header_rec            =>      l_header_rec,
                               x_header_val_rec        =>      l_header_val_rec,
                               x_Header_Adj_tbl        =>      l_Header_Adj_tab,
                               x_Header_Adj_val_tbl    =>      l_Header_Adj_val_tab,
                               x_Header_price_Att_tbl  =>      l_Header_price_Att_tab,
                               x_Header_Adj_Att_tbl    =>      l_Header_Adj_Att_tab,
                               x_Header_Adj_Assoc_tbl  =>      l_Header_Adj_Assoc_tab,
                               x_Header_Scredit_tbl    =>      l_Header_Scredit_tab,
                               x_Header_Scredit_val_tbl=>      l_Header_Scredit_val_tab,
                               x_line_tbl              =>      l_line_tab,
                               x_line_val_tbl          =>      l_line_val_tab,
                               x_Line_Adj_tbl          =>      l_Line_Adj_tab,
                               x_Line_Adj_val_tbl      =>      l_Line_Adj_val_tab,
                               x_Line_price_Att_tbl    =>      l_Line_price_Att_tab,
                               x_Line_Adj_Att_tbl      =>      l_Line_Adj_Att_tab,
                               x_Line_Adj_Assoc_tbl    =>      l_Line_Adj_Assoc_tab,
                               x_Line_Scredit_tbl      =>      l_Line_Scredit_tab,
                               x_Line_Scredit_val_tbl  =>      l_Line_Scredit_val_tab,
                               x_Lot_Serial_tbl        =>      l_Lot_Serial_tab,
                               x_Lot_Serial_val_tbl    =>      l_Lot_Serial_val_tab);
        --Save defaults from first line
        IF l_line_tab.EXISTS(1) THEN
          v_contact_id        := l_line_tab(1).SHIP_TO_CONTACT_ID;
          v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
          v_ship_to_org_id    := l_line_tab(1).SHIP_TO_ORG_ID;
          v_sold_to_org_id    := l_line_tab(1).SOLD_TO_ORG_ID;
          v_flow_status_code  := l_line_tab(1).FLOW_STATUS_CODE;
        END IF;
        --Clear out the line array before adding any new parts
        FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
          l_line_tab.DELETE(i);
          l_line_val_tab.DELETE(i);
          l_line_adj_tab.DELETE(i);
          l_line_adj_val_tab.DELETE(i);
          l_line_price_att_tab.DELETE(i);
          l_line_adj_att_tab.DELETE(i);
          l_line_adj_assoc_tab.DELETE(i);
          l_line_scredit_tab.DELETE(i);
          l_line_scredit_val_tab.DELETE(i);
          l_lot_serial_tab.DELETE(i);
          l_lot_serial_val_tab.DELETE(i);
        END LOOP;
        /* ********** Gather Order Lines ********** */
        OPEN c_order_parts;
        FETCH c_order_parts BULK COLLECT INTO v_order_parts;
        CLOSE c_order_parts;
        FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
          v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
          IF v_item_id IS NULL THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
          END IF;
          --Clear line first
          l_line_tab(i)             := OE_Order_Pub.G_Miss_Line_Rec;
             l_line_val_tab(i)         := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
          l_line_adj_tab(i)             := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
          l_line_adj_val_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
          l_line_price_att_tab(i)      := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
          l_line_adj_att_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
          l_line_adj_assoc_tab(i)   := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
          l_line_scredit_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
          l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
          l_lot_serial_tab(i)       := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
          l_lot_serial_val_tab(i)   := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
          --Set line information
             l_line_tab(i).PRICE_LIST_ID          := v_oracle_order.PRICE_LIST_ID;
          l_line_tab(i).header_id              := v_oracle_order.header_id;
          l_line_tab(i).inventory_item_id      := v_item_id;
          l_line_tab(i).ordered_quantity       := v_order_parts(i).QUANTITY;
          l_line_tab(i).operation              := l_op_code;
          l_line_tab(i).unit_list_price        := 0;
          l_line_tab(i).ship_from_org_id       := v_oracle_order.ship_from_org_id;
          l_line_tab(i).program_id             := fnd_global.conc_program_id ;
          l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
          l_line_tab(i).order_source_id        := v_source_id;
          l_line_tab(i).calculate_price_flag   := 'N' ;
          l_line_tab(i).unit_selling_price     := 0.00 ;
             l_line_tab(i).request_date           := v_apex_order.onsite_date;
             l_line_tab(i).Schedule_ship_date     := v_apex_order.onsite_date;
             l_line_tab(i).promise_date           := null;
          l_line_tab(i).invoice_to_org_id      := v_invoice_to_org_id;
          l_line_tab(i).ship_to_org_id         := v_ship_to_org_id;
          l_line_tab(i).sold_to_org_id         := v_sold_to_org_id;
          l_line_tab(i).ship_to_contact_id     := v_contact_id;
        END LOOP;
    --OE_DEBUG_PUB.DEBUG_ON;
    --OE_DEBUG_PUB.Initialize;
    --OE_DEBUG_PUB.SetDebugLevel(5);
        --Add lines to order
        OE_Order_Pub.Process_order(p_api_version_number            =>      1.0,
                                   p_init_msg_list                 =>      FND_API.G_TRUE,
                                   p_return_values                 =>      FND_API.G_TRUE,
                                   p_action_commit                 =>      FND_API.G_FALSE,
                                   x_return_status                 =>      l_ret_status,
                                   x_msg_count                     =>      l_msg_count,
                                   x_msg_data                      =>      l_msg_data,
                                   p_header_rec                    =>  l_header_rec,
                                   p_old_header_rec                =>  l_header_rec,
                                   p_header_val_rec                =>  l_header_val_rec,
                                   p_old_header_val_rec            =>  l_header_val_rec,
                                   p_Header_Adj_tbl                =>  l_Header_Adj_tab,
                                   p_old_Header_Adj_tbl            =>  l_Header_Adj_tab,
                                   p_Header_Adj_val_tbl            =>  l_Header_Adj_val_tab,
                                   p_old_Header_Adj_val_tbl        =>  l_Header_Adj_val_tab,
                                   p_Header_price_Att_tbl          =>  l_Header_price_Att_tab,
                                   p_old_Header_Price_Att_tbl      =>  l_Header_price_Att_tab,
                                   p_Header_Adj_Att_tbl            =>  l_Header_Adj_Att_tab,
                                   p_old_Header_Adj_Att_tbl        =>  l_Header_Adj_Att_tab,
                                   p_Header_Adj_Assoc_tbl          =>  l_Header_Adj_Assoc_tab,
                                   p_old_Header_Adj_Assoc_tbl      =>  l_Header_Adj_Assoc_tab,
                                   p_Header_Scredit_tbl            =>  l_Header_Scredit_tab,
                                   p_old_Header_Scredit_tbl        =>  l_Header_Scredit_tab,
                                   p_Header_Scredit_val_tbl        =>  l_Header_Scredit_val_tab,
                                   p_old_Header_Scredit_val_tbl    =>  l_Header_Scredit_val_tab,
                                   p_line_tbl                      =>  l_line_tab,
                                   p_line_val_tbl                  =>  l_line_val_tab,
                                   p_Line_Adj_tbl                  =>  l_line_adj_tab,
                                   p_Line_Adj_val_tbl              =>  l_line_adj_val_tab,
                                   p_Line_price_Att_tbl            =>  l_line_price_att_tab,
                                   p_Line_Adj_Att_tbl              =>  l_line_adj_att_tab,
                                   p_Line_Adj_Assoc_tbl            =>  l_line_adj_assoc_tab,
                                   p_Line_Scredit_tbl              =>  l_line_scredit_tab,
                                   p_Line_Scredit_val_tbl          =>  l_line_scredit_val_tab,
                                   p_Lot_Serial_tbl                =>  l_lot_serial_tab,
                                   p_Lot_Serial_val_tbl            =>  l_lot_serial_val_tab,
                                   p_action_request_tbl            =>  OE_ORDER_PUB.G_MISS_REQUEST_TBL,
                                   x_header_rec                    =>      p_header_rec,
                                   x_header_val_rec                =>      p_header_val_rec,
                                   x_Header_Adj_tbl                =>      p_Header_Adj_tab,
                                   x_Header_Adj_val_tbl            =>      p_Header_Adj_val_tab,
                                   x_Header_price_Att_tbl          =>      p_Header_price_Att_tab,
                                   x_Header_Adj_Att_tbl            =>      p_Header_Adj_Att_tab,
                                   x_Header_Adj_Assoc_tbl          =>      p_Header_Adj_Assoc_tab,
                                   x_Header_Scredit_tbl            =>      p_Header_Scredit_tab,
                                   x_Header_Scredit_val_tbl        =>      p_Header_Scredit_val_tab,
                                   x_line_tbl                      =>      p_line_tab,
                                   x_line_val_tbl                  =>      p_line_val_tab,
                                   x_line_adj_tbl                  =>      p_line_adj_tab,
                                   x_line_adj_val_tbl              =>      p_line_adj_val_tab,
                                   x_line_price_att_tbl            =>      p_line_price_att_tab,
                                   x_line_adj_att_tbl              =>      p_line_adj_att_tab,
                                   x_line_adj_assoc_tbl            =>      p_line_adj_assoc_tab,
                                   x_line_scredit_tbl              =>      p_line_scredit_tab,
                                   x_line_scredit_val_tbl          =>      p_line_scredit_val_tab,
                                   x_lot_serial_tbl                =>      p_lot_serial_tab,
                                   x_lot_serial_val_tbl            =>      p_lot_serial_val_tab,
                                   x_action_request_tbl            =>      p_action_request_tab);
    --  OE_DEBUG_PUB.DEBUG_OFF;
        p_return_code := l_ret_status;
        IF l_ret_status != 'S' THEN
          DBMS_OUTPUT.PUT_LINE(l_msg_data);
          IF l_msg_count = 1 THEN
            p_status := OE_Msg_Pub.Get(1,'F');
          ELSE
            FOR i IN 1..l_msg_count LOOP
              p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
            END LOOP;
          END IF;
          p_status := 'Error loading lines<br>' || p_status;
        ELSE
          p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
        END IF;
    --    WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
    --      OE_DEBUG_PUB.GetNext(v_debug);
    --      DBMS_OUTPUT.PUT_LINE(v_debug);
    --    END LOOP;
      EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          RAISE;
      END TEK_ORD_PROCESS_ORDER;Thanks!
    Jonathan Hart

    Hello,
    Try the following
    1) Check if any processing constraints are applied to customer/location
    2) Try to create a new customer and associate internal location.
    Create a new order to reproduce the issue
    Thanks
    -Arif

  • Analysis Authorization failed for Multiprovider

    Hi all,
    We are facing an issue pertaining to the Analysis Authorization for a multiprovider. When we attempt to access a query base on a multiprovider, the program complains that it has insufficient authorization. So we did debugging in the customer exit and we realise it fails to populate the rest of the authorization variables in I_step = 0. Base on our initial investigation this only happens on queries on multiprovider, so is there anything I need to set or do to curb this error?
    Many thanks!

    Best solution is to trace the authorization for your issue in ST01.
    Switch on the trace in ST01 and start your work. if you face authoirzation check failed. look into the trace there you will find the logs and authorization failed for your userid.
    And one more thing, have you got anything in SU53 as authorization check failed?
    Hope this would help you.

Maybe you are looking for

  • How do all users share a libary?

    How do I install ITunes on XP so all users share on libary. Hard Disk space is a concern and I don't want every user to have a separate libary.

  • Trying to add Exchange server to existing O365 Tenant

    Original installation moved mailboxes from Exchange 2010 server to O365 - worked great. Decomissioned the 2010 server, then realized that I needed it to do administration of Exchange on-line. Built new Exchange 2013 Server on-prem, patched to CU3, ob

  • Problem while uploading Image to DataBase

    Hi , i m getting exception while executing code below, is there anything to configure the data base before uploading images onto the database.... Connection con=null; try{ Class.forName("youroracledriver").newInstance(); con = DriverManager.getConnec

  • How to Check for Default Applet Selection

    Hello all, I'm new to the Java Card world, so I'll warn you in advance my questions will be basic. I appreciate your willingness to help us newbies out. I've been given a smart card and applets to dissect an reverse engineer. Currently, Applet 1 is l

  • ViewSet with three rows

    Hello All, I have a scenario in which i want to use ViewSet having three rows. <b>1st Row - View1 (having a Header and RoadMap UI element) 2nd Row - View2 (having a dynamic UI view) 3rd Row - View3 (having Next & Previous buttons to move through the