SOLMAN_SETUP E:000 error

After the installation of SOLMAN EHP1 with SID SOL, i started the transaction in 001 client SOLMAN_SETUP ,
in the web interface while doing the initial configuration in technical configuration step , i am getting e:000 error .
Before that i was getting "system SOL does not exist" to resolve this i tried to add SOL system under solution manager systems in SMSY .After the addition of SOL in SMSY , it fetched the data after two hours with no message server /port etc and error changes to " No host for system SOL" . i further deleted the SOL system from SMSY and now i am getting E:000 error .
any ideas , anything which i need to configure or check before doing the initial configuration.?

>
indian tiger wrote:
> thanks for discussion , however does i need to check any prerequisite for the initial config as no sap document says to manually define the solution manager system itself in its own SLD.
> Also , when i tried to define the solman system in smsy the message server and instance fields are blank and i am not able to select as the select button in not active ( grey)
The Solman_setup > Initial Configuration creates a logical component and the SID for the solution manager will be included.
If the solution manager system is not defined, how can the logical be assigned to a system? Solution Manager is in the system lanscape. It needs to be defined. If it is not in the SLD, it needs to be defined manually in SMSY.
Keep in mind to make changes you need to be in change/edit mode.
I hope this information is helpful.
Regards,
Paul

Similar Messages

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Reinstalled all softwere. Nothing changed.

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. CPU t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Tried SMC, NVRAM, PRAM. Reinstalled all softwere. Nothing changed.

I suspect you have hardware problem with a fan sensor. Doing a software install will not help the machine needs to be taken in for service. If you run Apple Hardware Test in Extended Mode it should reveal the error code. If it does not then run AHT an additional 2-3 times to be sure in Extended Mode. Each pass will take about 30-60 minutes.

IDX2 and it gives me I::000 error

Hi All,
I am trying to import metadata using the IDX2 and it gives me I::000 error. I have checked the authorizations for the user RFCUSER on R/3 and it has
SAP_ALL
SAP_NEW
I am not sure where can I check the log which can show me where could be the problem...
Kind Regards,
Praveen.

Hi Praveen,
Check if these threads give you some inputs:
I::000 error in IDOC to IDOC scenario
::000 message no. SR053
Regards,
ravi

ALC-DSC-213-000 Error on WebService

I created a process/Web Serbice in Workbench that goes out to the edcprincipaluserentity in the repository and pulls back the 'uidstring' from the db table. I have created a DataConnection in Designer that talks back to the LC Server and it connects to the WSDL file. When I invoke the button from the DataConnection link, it does not pull any information back into the output fields.
While in workbench I can put in a test value and can see the results in the XML returned.
I have Disabled sercuirty in ADMINUI for this process and it still does not work.
Livecycle 8.1 is the version.
Below is the error from the server.log.
2009-01-15 13:32:34,990 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
ALC-DSC-213-000: com.adobe.idp.dsc.DSCException: No Credential or Context set
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:84)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 0)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.workflow.engine.PEUtil.propogateFault(PEUtil.java:202)
at com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker$1.doInTransaction(WorkflowDSCInvoke r.java:285)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:282)
at sun.reflect.GeneratedMethodAccessor288.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:389)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy174.doRequiresNew(Unknown S

Paul - in 8.1 there is no parameter for Run As, you only have Security Enable/Disable. Is there someplace else that this would have to be set. I went to Services > Archive Management > Endpoint Management

I::000 error in IDOC to IDOC scenario

Hi,
I am trying to configure my XI to connect to an ECC system. I have a service user ID/password for that ECC system and have configured the relative RFC destination and port. The problem is, when I try to load the IDOC metadata to test my connectivity in idx2, it throws an error 'I::000'.
There are no firewall involved, and I am pretty sure that the service user ID has the relavant authorizations since the user has been copied from my production system. I have a HR system configuration also, and that metadata loaded successfully.
Is there something I am missing?
cheers,
Prashanth

Hi guys,
The issue is resolved.The problem was that the service user ID created on the ECC system for XI to connect to it, had been locked, hence affecting RFC destination, port and inturn, loading of the IDOC metadata in IDX2.
Thanks a ton everyone
cheers,
Prashanth

ABEND RSBOLAP (000): error in class SAPMSSY1 method - after report move Pro

Hi Guys,
We recently moved a report to production and got the following error (500 Internal Error) when executing from Query designer
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
I saw in one of the threads to run the Program RSPOR_SETUP and see if all the 12 steps are ok and they are not but they are not ok in Dev and Qua as well where its running fine. Appreciate if somebody can advise.

Hi,
Check your Query in RSRT properties tab and make necessary settings.
Do OLAP check in RSCRM_BAPI t-code. It will show the inconsistencies in your query.......
Regards,
Suman

4sns/1/4000000001:id0r-0.000 ERROR!!!

I have a Retina MacBook Pro, 2.3 GHz Intel Core i7, 16 GB Ram, is six months. Since I bought the machine travanho lives. Sometimes several times during the day. I took the Apple store in New York and did some tests, but nothing was detected. Now, doing the diagnostic test here at home, I found the error:
4SNS/1/40000001: ID0R-0000.
Anyone know what it is and how to solve?
thank you
André

You really need to CALL AppleCare & advise them of the error. Take full advantage of your warranty.
Also, Apple stores are not the only places that repair Macs. AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)

Error in Solman_setup of Solman 7.1 sp11

Dear All,
I have installed new solman 7.1 and upgrade to sp11.
I have created new client and client copy done by from 000 client.
I started the solman_setup configuration.
While doing system preparation getting error web dispatcher step.
I got struck here from one day onwards.
For your reference i attached screen shots and suggest some solution for this....
Regards
Chandra

Hi,
After doing client copy from 001 and doing solman_setup but same error.
Please give me some solution for this..
I followed sap note 1822831 - Web Service Soap Errors in solman_setup.
But it is not useful for me.
i am able follow that sap note SM_INTERN_WS user is not loging to java system.
"Trying to logon manually with SM_INTERN_WS onto the Solution Manager java stack (eg System Info page) may also help to reproduce the issue, which may in some cases, be due to a misconfiguration of the Java UME."

Bonjour showing error messages in windows logs -- 17,000+ in past week

My windows machine system logs were growing quite large, so I decided to poke around a bit. I found that the bulk of the 17,000 error messages dealt with Bonjour.
here's a couple of examples:from the logs
Error
8/25/2012 11:47:46 AM
Bonjour Service
100
None
Error
8/25/2012 9:42:44 AM
Bonjour Service
100
None
Error
8/25/2012 9:42:44 AM
Bonjour Service
100
None
I'm running Windows 7 Ultimate service patch 1.
Is this normal? What do I need to do to correct this?
tnx
mcm

534/2980
Hi Drake,
Yes, it is common, and I wouldn't worry about it.
These "errors" are not about anything wrong. My guess is that it's a developer jargon to indicate that something didn't happen, only because there is no possibility of it happening given your specific settings/system options.
See for example the statements "System woke from sleep" or "System going to sleep" in "error_log"...
We don't know to what extend these "errors" belong to so many unmodified files that used to do something in UNIX 15 years ago, but are now completely useless, harmless and so small they can't affect Mac OS X performance in any way?
Enjoy your Mac!
Axl

IDX2 Metadata Error Message no.000 File to Idoc senario

Hello Experts,
I am trying to load metadata in IDX2 manually. But it fails and comes out with message Message no.000
I have crossed checked my RFC Destination (SM59) the connection test is successful. The port on IDX1 is created
Similarly the RFC Destination on CRM system is created too. Why is it that my metadata load is giving this message?
Also I created and end to end scenario in XI system for File to Idoc. The file is scheduled in queue for process. The receiver determination has hot started in pipe line process.
To check these when i went to idx2 there is not metadata. hence i tried to load the meta data ... am i searching in right direction?

Yet again like the post in this thread
IDX2 Meta data import fails. I::000 error.
I have been stupid not to check the user on R/3 i spelled the user wrong
Thanks for your support guys

Error occurring in SOLMAN Initial Configuration

I have installed Solution Manager 7.0 EHP-1 on a Windows 2003 64-bit server.
Using u201CClient =001u201D transaction SOLMAN_SETUP, I performing the Initial Configuration, During that time I got below errors.
Server Details :-
         Server name = sapsolman
         SYSID        = SOM
         Database     = SQL
Error -1
           Runtime Errors UNCAUGHT_EXCEPTION
           Exception       CX_FQDN
I resolve by myself by adding u201Cicm/host_name_full = sapsolman.cpt.comu201D in parameter end as well as with u201CC:\WINDOWS\system32\drivers\etc\hostsu201D , and proceeding further with Initial Configuration.
Error -2
When I am creating SOLMAN_ADMIN user I got below error
1- Business Partner 0000000101 successfully created for user SOLMAN_ADMIN
2- Role assignment to user SOLMAN_ADMIN Changed
3- User SOLMAN_ADMIN Sucessfully Created
4- u201C The selected templates do not contain any authorization data u201C      <----- Error
Error -3
               Next step in Initial Configuration returns the following error:
System SOM does not exist      <----- Error
E::000                                       <----- Error
Kindly give solutions for Errors 2nd & 3rd ASAP.

Hello,
FQDN referes to Fully Qualified Domain Name - and this would indicate the FQDN has not been set in RZ10
parameter icm/Host_name_full has not been equated to the fully qualified Domain name of the server.
Is SOM and SID of a System? Has it been declared in SMSY?
Seems you may have some IMG activities left to do in SPRO...have you configured your BC Sets? Have you enabled HTTP Services, etc, etc?
Regards,
Paul

SOAP Receiver Adapter Error in XI RWB - java.lang.NULLPointerException

Hi,
We have a asynchronous scenario in SAP-XI, where we are sending the PO data from SRM to third party (Hubspan / TNT). Proxy is being used at Sender side and SOAP Adapter is used for Receiver Communication Channel.
u2022SRM is sending around 1000 messages through background job and around 995 or 996 messages are being processed successfully and showing the proper XML payload as well in RWB. But 4-5 messages are getting failed in XI RWB for u2018java.lang.NullPointerExceptionu2019. For these failed messages we are not able to see the XML payload as well in XI RWB while these messages are showing successful status in MONI in SRM and XI and we are able to see the payload as well in MONI. The webservice is restarting and trying to send the payload three times in RWB, but it is getting the same Nullexception error.
04.11.2011 16:45:49.715 Success Delivering to channel: CC_B2B_HUBSPAN_RCV
04.11.2011 16:45:49.715 Success MP: Entering module processor
04.11.2011 16:45:49.715 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
04.11.2011 16:45:49.716 Success SOAP: request message entering the adapter with user J2EE_GUEST
04.11.2011 16:45:49.716 Success SOAP: Target url: https://connect.hubspan.net/mh/server/tp=NMHG/ssid=DAA6F0E9AC1000BD03A41B363BBFD676
04.11.2011 16:45:49.999 Error SOAP: call failed: java.lang.NullPointerException
04.11.2011 16:45:49.999 Success SOAP: sending a delivery error ack ...
04.11.2011 16:45:49.999 Success SOAP: sent a delivery error ack
04.11.2011 16:45:49.999 Error SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException
04.11.2011 16:45:49.999 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException
04.11.2011 16:45:50.000 Error Exception caught by adapter framework: null
04.11.2011 16:45:50.022 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
04.11.2011 16:45:50.037 Success The message status set to WAIT.
u2022If we are resending the failed message from XI RWB, it is getting failed again with the same error. On the other hand if we are initiating the message again from SRM to Hubspan for the same PO, it is getting processed successfully in RWB but still not showing XML payload in RWB.
u2022If we are getting the payload from XI MONI for the failed message and doing a test with component monitoring in RWB, it is working fine.
Please help me to solve this issue.
Thanks
Sumit

Hi Sumit,
From my experience, when you transfer SAP POs through PI to external webservice, there should be some validation happens at the webservice layer of the target system before the web service passes the original information to their application layer. The validation can be anything like checking the Vendor address, Checking the correctness of the order ...etc etc . So i would suggest to ask your external web service folks to check if they have any validation in place before they pass the data to their application layer.
As you said only some POs/XMLs are failing, i strongly feel that this could be the issue.
Please note if you receive response code other than 200 from webservice, SOAP adapter treats that as error and send the same message back to AE.
Normally webservices won't send 200 code for any validation error
PS: you can still try to use XMLSpy to post the failed message to the web service to know the exact cause.

Error when Starting LiveCache

Hello all,
The restart of LiveCache is works fine, but I checked the LCTRC#init.log file and I saw the following error:
Installation successfully finished
==================================
11455 2009-01-13 16:21:03.000 ERROR: Could not write to 'teo110_PipeBase::eo110_WritePipe' pipe, rc = 32 - (teo110_PipeBase::eo110_WritePipe)
liveCache LCQ successfully restarted
I did not find sap notes for it. Could you help me on this?
Thanks,
Alberto.

Hello Alberto,
1. If you have the liveCache/MAXDB questions/problems please post
    them at the correct forum Expert Forums » Database & OS Platforms » MaxDB/liveCache :
2. As SAP customer you have option to open the ticket at the component 'BC-DB-LVC'
    to check the system and get the answer from SAP support.
3. May be the problem as in PTS 1145968 , www.sapdb.org/webpts -> Advanced Search & use the PTS number. Please post more details:
       What is the OS of the liveCache server?
       What is the version of the liveCache on your system?
Thank you and best regards, Natalia Khlopina

Error when clicking in the filter zone of a carac. with hierarchy

Hello,
I am using the SAP BI7 version and I have a problem in the BEX anayzer. When I click in the filter zone and when I choose a filter caracteristic that contains a hierarchy I have the following error message and i am killed:
<b>Class RSBOLAP 000:Error in the SAPMSSY1 method: uncaught exception
Class BRAIN 299 System error int the CL_RSR_NET_RSMD_VHS_SVC program and form GET_HIER_NODE_READER:01.</b>
Do you have ever had a same error? what can be solution?
Thanks for your help!
Regards,
Julien

Julien,
Refer to the SAP Note 1013095 - UNCAUGHT_EXCEPTION for queries with hierarchy variables. This seems to be referring your scenario.

Consolidation Error Documentation (CSD)

Hi all,
I have recently ended upon a consolidation engine error (CSD-070, CSD-080). Searching in the forum I have see some threads talking about some documentation about these errors. Could anyone please send that documentation?
About the CSD-070 (No Time available) & CSD-080 (No Group Available) errors, does anybody know what they can be related to?
Kind Regards,
Rafael
Edited by: Rafael Moreno on Oct 2, 2008 2:00 PM

Please find below a list of all errorcodes per stored procedure.
Alwin
MSG     SPRUNCONVERSION
FX-000     ERROR FX-000 Application not Available !
     Appset maintenance in progress
FX-010     ERROR FX-010 Wrong Application, check your logic
     You may have hardcoded a wrong application in your logic.
FX-020     ERROR FX-020 No Currency in your Appset ! You must have a Dimension with dimension type = u2018Ru2019 in your Application. !
     You must have at least one member with CURRENCY_TYPE = R In your currency dimension.
FX-030     Warning : Application without INTCO dimension
     No INTCO Dimension IN your Application.(Dimtype = I)
FX-040     Warning : Application without Flow Dimension
     No FLOW Dimension IN your Application.(Dimtype = S)
FX-050     Warning : Application without Datasrc Dimension
     No DATASRC Dimension IN your Application.(Dimtype = D)
FX-060     ERROR FX-060 No Local currency, You must have a currency with CURRENCY_TYPE Equal to L
     You must have one member with CURRENCY_TYPE = L (Local currency) In your currency dimension.
FX-070     ERROR FX-070 No Entity available in your Application
     You have to select a parameter which is not a parent.
FX-080     ERROR FX-080 No Time available in your Application
     Check if in the TIME Dimension, you have the property "MONTHNUM"
     Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2u2026.
FX-090     ERROR FX-090 Problem IN Category Dimension check properties.
     Your parameter CATEGORY is not valid.
FX-100     ERROR FX-100 Problem IN Category OR Ratedim Dimension check properties.
     Your parameter CATEGORY is not valid OR
     You don' t have the Property FX-SOURCE_CATEGORY In your Exchange Rate Dimension (For Simulation) OR
     The Exchange Rate id you chose doesn't exist.
FX-110     ERROR FX-110 Problem IN Category Or Categhory_for_ope check properties.
     Your parameter CATEGORY is not valid OR
     You don' t have the Property CATEGORY_FOR_OPE In your CATEGORY Dimension OR
     You don' t have the Property RATE_CATEGORY In your CATEGORY Dimension OR
     You don' t have the Property FX-DIFFERENCE_ONLY In your CATEGORY Dimension
FX-120     ERROR FX-120 Problem IN Category Or TIME.
FX-130     ERROR FX-130 No Group available.
     Check if the selected group has the property CURRENCY_TYPE = "G".
FX-140     ERROR FX-140 No Currency avalaible
FX-150     ERROR FX-150 Problem IN Ownership
     Check if you have a base member equal to "METHOD" in the account dimension of the OWNERSHIP cube.
     Check If you have valid information in the OWNERSHIP cube for the selected Category Time.
FX-160     ERROR FX-160 No Entity available
FX-170     ERROR FX-170 No Entity Available
FX-180     ERROR FX-180 No Datasrc to be converted
FX-190     ERROR FX-190 No Rate Application
FX-200     ERROR FX-200 No Rate Extract From FactRate
     No Rate found for the selected category and time.
     Check If the Rateentiy you enter in the parameter is the Same as the one in the Rateentity Dimension
     Check If the Rates in the Rate Cube are in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".
FX-210     Warning : No Rates found in the opening period
FX-220     ERROR FX-220 No Rate for reference currency
     Check If you Pivot currency (The base currency to enter the rate, Rate = 1) is filled.
FX-230     ERROR FX-230 Problem in your Entity Dimension id from your Rate application
     The Rateentity (Dimension from the Rate cube with Evdimtype = E) you chose does not exist
FX-240     ERROR FX-240 : No Rate Extract From MbrRate
     No Rate in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".
FX-250     ERROR FX-250 No Rates found
FX-260     ERROR FX-260 No Rate in Fact corresponding with Rate dimension
     Check If the Rates in the Rate Cube are in the RATE Dimension with Property Ratetype equal to "FX" OR "FX Rate".
FX-270     ERROR FX-270 No Formulas extract from FXTRANS
     No Rate formulas in your Fxtrans Table.
     Check if the application name in the Logic.
FX-280     ERROR FX-280 No values found (T_FIN)
     No values found for the selected Entities . Check if you have values in LC for the selected Entities OR
     Check if the LC values are fro DATASRC with Property IS_CONVERTED not equal to "N"
FX-290     ERROR FX-290 No values found (Entity - T_FINANCETMP)
FX-300     ERROR FX-300 No values found (CLCFXTRANS - T_FINANCE)
     No values found from FACT table for Account / Flow. Check if you have values in LC for the selected Account / Flow OR
     Check our Fxtrans Table.
FX-310     ERROR FX-310 No values found (RATE - T_DATA)
     No account extracted have a corresponding Rate_formula in the Fxtrans table.
FX-320     ERROR FX-320 No values found (ENTITY - GROUPS - T_FINAL2)
     Check your Ownership and your group_currency values.
     SPRUNCONSO
CSD-000     ERROR CSD-000 Application not Available !
     Appset maintenance in progress
CSD-010     ERROR CSD-010 No Subtables. Verify properties FLOW_TYPE, IS_INPUT, SEGNOINV, SUBTABLES_ORIG
     No Flow available, check the flow dimension, you must have the property "FLOW_TYPE"
CSD-011     ERROR CSD-011 No instruction retreived from the ELIM table
     No instruction retreived from ELIM Table.
     Check If the Elim id in ELIM table Exist in the ELIMH Table.
     Check if the Account in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACCOUNT Dimension)
CSD-012     ERROR CSD-012 No instruction retreived from the ELIM Table : GROUP_ACC Problem
     No instruction retreived from ELIM Table. GROUP_ACC Problem
     Check if the GROUP_ACC in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)
CSD-013     ERROR CSD-013 No instruction retreived from the ELIM Table : MINO_ACC Problem
     No instruction retreived from ELIM Table. MINO_ACC Problem
     Check if the MINO_ACC in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)
CSD-014     ERROR CSD-014 No instruction retreived from the ELIM Table : EQUITY_ACC Problem
     No instruction retreived from ELIM Table. EQUITY_ACC Problem
     Check if the EQUITY_ACC in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)
CSD-015     ERROR CSD-015 No instruction retreived from the ELIM Table with FLOW Dimension
     Check if the SUBTABLE_ORIG in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST in the FLOW Dimension)
CSD-020     ERROR CSD-020 No Currency in your Appset ! You must have a Dimension with dimension type = u2018Ru2019 in your Application. !
     No Account extracted from CLCELIM Table, please check the Account from CLCELIM.
     Check if the ACCOUNT in the ELIM Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACOUNT Dimension)
CSD-030     ERROR CSD-030 No Entity Available
     No Entity extracted. Check if you have the Property INTCO and the property CURRENCY in your ENTITY Dimension
CSD-040     ERROR CSD-040 No Account
     No Account Extract from Account Dimension
CSD-050     ERROR CSD-050 No datasrc. Verify Properties DATASRC_TYPE,DATASRC_ORIG, IS_CONSOL
     No Datasrc extracted.
     Check if you have the Property "DATASRC_TYPE" and the property "IS_CONSOL" in your DATASRC Dimension
CSD-060     ERROR CSD-060 No Rules
     No rules in your CLCRULES Table
     Make sure the METHOD from the CLCRULES is not blank.
     Make sure the I_METHOD from the CLCRULES is not blank.
CSD-070     ERROR CSD-070 No Time available
     Check if in the TIME Dimension, you have the property "MONTHNUM"
     Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2u2026.
CSD-080     ERROR CSD-080 No Group Available
     Check if the selected group has the property CURRENCY_TYPE = "G".
CSD-090     ERROR CSD-090 Nothing Extracted From Ownership
     Check if You have the property "IS_INPUT" in the Account dimension of the OWNESHIP Cube
     Check if You have some base member from the Account dimension of the OWNESHIP Cube with IS_INPUT = "Y"
     Check If you have valid information in the OWNERSHIP cube for the selected Category Time.
CSD-100     Warning : Nothing Extract From Ownership for OPENING Period
     Nothing extracted from Opening period in the Ownership cube.
CSD-110     ERROR CSD-110 No AccountOwn available
     Check if You have the property "IS_INPUT" in the Account dimension of the OWNESHIP Cube
     Check if You have the property "RATETPE" in the Account dimension of the OWNESHIP Cube
     Check if You have some base member from the Account dimension of the OWNESHIP Cube with IS_INPUT = "Y"
CSD-120     ERROR CSD-120 No Entity - Method available
     No data found in OWNERSHIP Cube for this method.
     Check if you have METHOD in your ownership cube for the selected CATEGORY - TIME - GROUP
CSD-125     ERROR CSD-125 No Entity - Method available
     No data found in OWNERSHIP Cube for this method.
     Check if you have METHOD in your ownership cube for the selected CATEGORY - TIME - GROUP
CSD-130     ERROR CSD-130 Problem Extracting data from the Fact Table
     No Values found
     Check if You have Some Account from the ELIM Table.
     Check if You have some DATASRC with IS_CONSOL = "Y"
CSD-135     ERROR CSD-135 Problem Extracting data - C_FINANCE
     No Values found
     Check the Account in the FACT Tables
CSD-140     ERROR CSD-140 Problem Extracting data - C_DATA
     No Values found
     Check the Entity in the FACT Tables
     Check the INTCO in the FACT Tables
CSD-145     ERROR CSD-145 Problem Extracting data - C_DATA_ALL
     No Values found for those Account And/Or Flow.
     Check the DATASRC in the FACT Linked to the DATASRC_ORIG in the ELIMH Table.
CSD-150     ERROR CSD-150 Problem Extracting data - C_REPART
     No Values found for those rules.
     Check the method between METHOD Table and your ownership Cube.
     Check your Rules between the RULES Table and The ELIM Table.
     Check The INTCO.
CSD-160     ERROR CSD-160 Problem Extracting data - C_CONSO
     SPRUNCALC
CALC-000     ERROR CALC-000 Application not Available !
     Appset maintenance in progress
CALC-010     ERROR CALC-010 Nothing Extract from CALCACCOUNT TABLE
     Nothing Extracted from CALCACCOUNT Table, check the account, The account must be a as Base Member or an Agregat or a Value in property DIMLIST or a value from property TYPELIM in the ACOUNT Dimension)
CALC-020     ERROR CALC-020 Nothing Extract from CALCACCOUNT TABLE   (FLOWS)
     Nothing Extracted from CALCACCOUNT Table, check the Subtables, The Subtables must be a as Base Member or an Agregat or a Value in property DIMLIST in the FLOW Dimension)
CALC-030     ERROR CALC-030 NoTime extract.
     Check your TIME Dimension
CALC-040     ERROR CALC-040 NoTime extract for YTD
     Check your TIME Dimension.
     Check if in the TIME Dimension, you have the property "MONTHNUM"
     Check if in the TIME Dimension, you have filled properly the property "MONTHNUM". The first Period of the Fiscal year must be 1, and then the second 2u2026.
CALC-050     ERROR CALC-050 NoEntity extract
     Check your Parameter Entity, it must be an base member (Or a list of base member) from the ENTITY Dimension
CALC-060     ERROR CALC-060 NoEntity extract
     Check your Parameter Currency, it must be a base member (Or a list of base member) from CURRENCY Dimension
CALC-070     ERROR CALC-070 NoEntity extract
     No values found, check if you have something to calculate for the selected CATEGORY - TIME - CURRENCY
     Check your CALCACCOUNT Table.
     Check : The account must be a as Base Member or an Agregat or a Value in property DIMLIST or a value from property TYPELIM in the ACOUNT Dimension)
CALC-080     ERROR CALC-080 NoEntity extract
     No Values found.
     Check your CALCACCOUNT Table.
     Check : The SUBTABLES must be a as Base Member or an Agregat or a Value in property DIMLIST in the FLOW Dimension)
     SPCOPYCATEGORY
CCAT-000     ERROR CCAT-000 Application not Available !
     Appset maintenance in progress
CCAT-010     ERROR CCAT-010 No Time available in your Application
     Check your Parameter "Time".
CCAT-020     ERROR CCAT-020 Nothing extracted from the Account Dimension
     Check the property in the parameter.
     Check that this property is in the ACCOUNT Dimension
CCAT-030     ERROR CCAT-030 No Entities available
     Check your Parameter "Entity".
CCAT-040     ERROR CCAT-040 No Currency available
     Check your Parameter "Currency".
CCAT-050     ERROR CCAT-050 No data found
     No data found, check if you have data for the selected CATEGORY - TIME - CURRENCY
     SPCOPYOPENING
COPYO-000     ERROR COPYO-000 Application not Available !
     Appset maintenance in progress
COPYO-010     ERROR COPYO-010 No Datasrc Available
     Check if you have Datasrc with DATASRC_TYPE different from "A"
     Check if COPYOPENING Property is equal to Y
COPYO-020     ERROR COPYO-020 Nothing extracted from COPYOPENING TABLE
     Check your COPYOPENING TABLE
COPYO-030     ERROR COPYO-030 No Time available
     Check your Parameter "Time".
COPYO-040     ERROR COPYO-040 No category available
     Your parameter CATEGORY is not valid OR
     You don' t have the Property CATEGORY_FOR_OPE In your CATEGORY Dimension OR
     You don' t have the Property OPENING_YEAR In your CATEGORY Dimension OR
     You don' t have the Property OPENING_PERIOD In your CATEGORY Dimension
COPYO-045     ERROR COPYO-045 No category available
     Your parameter CATEGORY is not valid
COPYO-050     ERROR COPYO-050 Problem in COPYOPENING Properties
     Check Opening_year and / Or Opening period properties in CATEGORY Dimension.
COPYO-060     ERROR COPYO-060 No Entities available
     Check your Parameter "Entity".
COPYO-070     ERROR COPYO-070 No Currency available
     Check your Parameter "Currency".
COPYO-080     ERROR COPYO-080 No Account available
     Check your COPYOPENING Table
     Check if the Account in the COPYOPENING Table Exist. (as Base Member or as Agregat or as Value in property DIMLIST or value from property TYPELIM in the ACCOUNT Dimension)
COPYO-090     ERROR COPYO-090 No Data found
     Check if you have data for the selected CATEGORY - TIME - GROUP
     SPRUNVALID
VALID-000     ERROR VALID-000 Application not Available !
     Appset maintenance in progress
VALID-010     ERROR VALID-020 Nothing extracted from VALIDATION TABLE
     Check your VALIDATION TABLE
VALID-020     ERROR VALID-020 Nothing extracted from VALIDATION_H TABLE
     Check your VALIDATION_H TABLE
VALID-030     ERROR VALID-030 Wrong Application, check your logic
     You may have hardcoded a wrong application in your logic.
VALID-040     ERROR VALID-040 No Datasrc available
     Check your Parameter "DATASRC".
VALID-050     ERROR VALID-050 No Time available
     Check your Parameter "Time".
VALID-060     ERROR VALID-060 Nothing extracted from VALIDATION - VALIDATION_H Table
     Check your VALIDATION TABLE
     Check your VALIDATION_H TABLE
     Check the validation iD in VALIDATION and VALIDATION_H Table.
VALID-070     ERROR VALID-070 No Data found
     Check if you have data for the selected CATEGORY - TIME - GROUP
VALID-080     ERROR VALID-080 No Data found for the selected period
     Check your PERIOD Property in the VALIDATION_H Table

SOLMAN_SETUP E:000 error

Similar Messages

Maybe you are looking for