SOlman_setup issue at implement SAP Note Step

Hi Friends,
While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
In this step while i am performing the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
And as per the note
when i am executing IB_GEN i am getting below errors.
Object not found - will be created.
No changes made; Saving not allowed
Failed to save object % 1 (Object family 7001).
Kindly suggest on this.
Thank you,
Chowdary.

Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)

Similar Messages

Issue with implementing SAP note 1486147.

I am trying to implement SAP note 1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?

Hi,
Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM

Issue of implement SAP Note

Dear Expert
When I implement SAP note through t-code SNOTE, it shows an alert message "SAP Note doesn't contain valid correction instructions". How should I fix this issue? Any response is appreciated.

Dear Experts
   All SAP Notes I need to implement are :
   1118532, 1068198, 1014997, 599812
   These are all about Czech language.
Our SAP version :
   SAP R/3 Enterprise 470 x 620
Any idea??

Error in TDS Calculation(/4T1) after implementing SAP Note

Dear Experts,
I have implemented SAP Note and followed the steps suggested by SAP. I have processed payroll and found that /4T1 Income Tax 02 is still showing 30,000. Kindly attached screenshots of tax slab and RT for your reference.
Kindly suggest.
Regards
Ravi Kumar

Dear Experts,
It was observed that for senior citizens, system is calculating on 2,50,000 instead of 3,00,000. Kindly find attached screenshot of RT for the employee whose age is 62.
Regards
Ravi Kumar

Implementing sap note

After implementing sap note i am getting this message
You have started to implement corrections that are contained in an SAP Note. However, you have not selected any objects in the overview of the Repository objects that are to be changed. This means that the system has not changed any objects that are in correction instructions 01200615321 00001630720005.
where do i select the objects to be changed

Hi
The transaction code SNOTE is used to implement OSS Notes. With the SNOTE
transaction, it is no longer necessary to register ABAP objects such as report function
modules etc. manually. But data dictionary objects such as screens, tables need to
be modified manually by registering them in OSS system.
In order to use the transaction code SNOTE, the relevant transport which implement
this transaction in the system need to be transported. Please refer to the SNOTE
guide available at http://service.sap.com
this pdf will be helpful
http://www.sappoint.com/basis/snote.pdf
Transaction Code 'SNOTE'
<b>Reward points for useful Answers</b>
Regards
Anji

Implementing SAP Note 837300

We have a situation when we implement SAP NOTE 837300, the following is the information I get, Please Assist anyone.
Diagnosis
    The objects R3TR NOTE 0000837300 and LIMU FUNC SO_OBJECT_MIME_GET cannot
    be edited together because only one of them can be transported out of
    this system. The other cannot be transported out of this system.
System Response
    The function terminates.
Procedure
    Edit the two objects separately.
Regards
Bangani

You have posted your question on the wrong forum. Here is dedicated to SAP Business One System Administration.
Please close your thread and find the proper one to post.
Thanks,
Gordon

Implement SAP Notes

Hi to all,
Can u please tell me about the following:
· Implement SAP Notes No. 730527 to display the error message 330 "Price of goods movement will become negative"

Are you familiar to implementing OSS Notes. Your message asks to implement OSS Note.
Here are details for how to implement an OSS Note. Hope this helps,
Go to Tr Code.SNote
1. Check the OSS no whether already been downloaded or not,
2. if not download it
3. it will be in the New tree.
4. FInd your note and double click on the same. then Pdf will open
5. Read it properly check whether it can be implemented it or cn not be implemented
6. If can be implemented then implemetnte the note and create a request for the same.
7. once implemented then go to consistant portion then change the status of the Notes for this you need to go to the SAP Note and change the note processing status to completed.
Note : Some times the SAP tells to download the files from the Service.sap.com and for some notes u need to create a field or new objects. For this u need to get the Access key from your team and change the same.
Lastly go inside the report and check whether the changes have been done or not.
sometimes changes may not be there. this will lead to problem
Check this thread for more details.
How to Implement OSS note
Reward if this helps.

Implementing SAP Note query

Hello,
My query is , i need to implement SAP Note 1232490. The highest support package applied in my system is SAPKB46C55.
This note is part of support pack SAPKB46C59. Can i apply this note now directly or should i apply SAPKB46C56,SAPKB46C57,SAPKB46C58,SAPKB46C59 ?
If i apply directly,what about if any dependencies exist for that ?how to check the dependencies ?
Our SAP Version -- 4.6C
Regards,
Chaitanya.

i have one more query.
for SAP Note : 1449574
it is written Valid Releases SAP_APPL 46C to higher releases.
But it is also written in SAP note that, this note comes as part of support pack for minimum 500 release.
can i apply this in R/3 4.6C ??
please go through the note pdf and please clear my doubt.
Regards,
Chaitanya.

Error Implement SAP Note

Hi all.
I'm trying implementing a SAP nota 1428256 by SNOTE, but I get an error: "Edit objects separately since they cannot be transported together". In help it says:
   " Message no. TK113
Diagnosis
     The objects R3TR CINS 01200314691         0000837366 and LIMU METH
     CL_IM_RFIDES_TAX_BADI_016     IF_EX_FI_T cannot be edited together
     because only one of them can be transported out of this system. The
     other cannot be transported out of this system.
System Response
     The function terminates.
Procedure
     Edit the two objects separately."
Could you help me? Do you know how to solve this error?
Thanks a lot.
Marta.

Dear Marta,
-TK113, might be user due to a transport layer issue:
1) Run transaction SE80 and choose package.
2) Package name "ID-FI-ES" and choose create.
3) Following should be the attributes.
   a. Package : ID-FI-ES
   b. Package Description : Spain Localization FI
   c. Application Component : FI-LoC
   d. Surrounding Package : APPL
   e. Transport Layer : you probably have here SP9C or SP6B or other
                        > this should be SAP, so please change to SAP
   f. Software Component : SAP_APPL
4) Save and activate the changes.
If you created the package already, please change the transport layer
to SAP and after activation please release the transport request and
retry the note implementation.
I hope this helps.
Mauri

Implementing SAP note 750287, 768456, 813703,

Hello,
I'm having prob with configuration, alert Configuration and Alert Inbox(when ever i click it is showing The requested resource does not exist) to solve the issue i have executed the report RSXMB_ACTIVATE_ICF_SERVICES,and also actiavated the alertinbox in trcode SICF, if i implement following notes is it going to affected the xi system, as i told you we don't have any QA and there is no back up for the system.
Snote 750287,
Snote 768456,
Snote 813703,
Kind regards,
Gayatri Gaddam

Hi,
It will affect the XI system. But I don't think so it will give any problem.. If you get you can revert back the SAP note, if you apply this thru SNOTE transactions..
Regards,
moorthy

Issue while implementing OSS note

Hi Experts,
While Implementing the note 100690 in sap , I am facing the following issue.
The traffic signal light is red and the message text shows as follows:
Object REPS ZKOGLMNG doesn't exist, create it
Object REPS ZKOMENGE doesn't exist, create it
Object REPS ZKORWEM2 doesn't exist, create it
Object REPS ZKORWEM3 doesn't exist, create it
Object REPS ZKORWEM4 doesn't exist, create it
Could you guys help me out in resolving this issue ASAP .
Thanks in Advance
Regards
Sandy

Hi Juan ,
Thanks for the mail,
I had a small doubt over here,
can I follow this procedure:
1). I will ask my ABAP team to create those mentioned objects manually.
2). Then I will implement the SNOTE , so that the corrections will be inserted into those objects.
I do understand your point earlier that to manually apply the corrections (In this case both step1 & 2 will be done by ABAPer's).
Please let me know if above procedure works .
Thanks&Regards
Sandeep

Implement SAP note while upgrade is running

Hello Folks,
In our upgrade, during our downtime phase, we are running into an issue that requires an SAP Note implementation. We started our main instance, but when we go into SNOTE transaction, it is not allowing us to implement any notes. It gives the message "cannot implement/deimplement SAP notes; upgrade is running"
We already tried commands tp unlocksys, tp unlock_eu, but nothing works. We are already past shadow instance switch, so unlocking shadow instance is no good.
Can anyone provide any inputs on how to overcome this issue?
Thanks!

Hi Fahad,
I think you have to implement the correction included in sap notes manually during upgrade.
You can refer to note 1369430. In this note, it is said that:
3. Now use a modification to change the source code for the function
    module ENH_MASS_ACTIVATION and the method
    CL_ENH_TOOL_HOOK_DEF->IF_ENH_OBJECT~AFTER_IMPORT as described in the
    attached correction instructions. You cannot currently use the Note
     Assistant SNOTE to do this. Activate this change.
So you see that it is not possible to use SNOTE during upgrade even after using unlocksys
and unlock_EU command.
Regards
Julia

Implementing SAP note 818051

Hi Experts,
I need to implement the solution described in SAP note 818051 for Z movement types (created as copy of standard).
The above note specifies validity for release till 500 ,(not sure about field "and subsequent") where as the customer is on release 7.1..
Please advise if this note will work for this 7.1 and if not, what were the future releases related to same.
Thanks.in advance
Neeraj Gupta

Hi Neeraj,
Let me clarify something, there is NO SAP-APPL release 7.1,you are probably talking about Basis release (SAP-BASIS or SAP-ABA).
Note 818051 clearly mentioned SAP-APPL package which the highest that you can be now is ECC 600 EHP5 but not 7.1.
Please check with your Basis administrator the package information.
Note says this:
SAP_APPL      <<<<<===== THIS IS THE NAME OF THE PACKAGE (APPLICATION PACKAGE NOT BASIS)
    SAP Application
                                         500          - 500          X
                                         470          - 470          X
                                         46C          - 46C          X
The "X" at the end of the line means that the note is valid to ALL SAP-APPL releases higher than 46C, and also higher than ECC 500 (again this is related to SAP-APPL release/package information).
I believe that this answers your inquiry.
Best Regards,
Vanessa.

Implement sap note

Hello
After implementing a note..is it possible to unimplement it....what i mean to say is that i have implemented a note and the changes have been done and gone to production...now if i want to unimplement the note is it possible...so that the changes done by it are deleted
thanks

Hi,
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/frameset.htm
In exceptional cases you can remove correction instructions that have been implemented. The changes that you implemented are then reset. The SAP Note remains in your system and is reset to the status that it had before you implemented it.
To do this, choose Reset SAP Note Implementation.
Thanks,
JituK

How can i implement sap note on crm

can anyone please tell me how to apply sap note for CRM?

HI Thomas,
1. Releases: A note can be modified in case more changes can be included. In that case, a new 'release' of the note will be created. In snote, you can also find the function 'downlaod the latest version'. This means snote will check the current release in OSS can download it.
2. Reference support pacakge: This is the support pcakge where the change in this OSS note is included. Any SP level equal or higher than that will make the note 'can not be implemented';
3. Correction Instructions: One note can have one or multiple correction instruction. Usualy they're for different releases (620, 640, 700 etc.). But sometimes the CIs are for the same release and they will be implemented into the system sequentially when the note is being implemented.
Normally, when you try to implement a note in SNOTE, go to the note browser, the note then has the 'implementation status'. ' can be implemented' means the note have the valid support pcakge level. 'cannot be implmented' means the note is already included the the support packages. "Not relevant' means the note changes a component which doesn't exist in the system.
Regards,
Satish Mathala

SOlman_setup issue at implement SAP Note Step

Similar Messages

Maybe you are looking for