Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Hi,
I have a problem with configuring managed systems in Solution manager using txn solman_setup. When I select the managed system, enter all the data for the READ destination, TMW destination and Back destination and click "Maintain Connection" the system comes back with message:
ST-PI Plugin not up-to-date for managed system IVE, see note 1274287
When I check the OSS note and my managed system I see that my managed system is already on the right required level for SAP Solution Tools Plug-In which is: ST-PI 2008_1_700.
I did check also for service packs but these do not yet exist.
Can someone help me with this issue?
Next list shows current version of the managed systems:
SAP ECC 6.0
SAP ABA 700 Sp 13
SAP Basis 700 SP13
St-PI 2008_1_700 SP 0
PI-Basis 2005_1_700 SP 13
SAP BW 700 SP 15
SAP AP 700 SP9
ST-A/PI 01l_ECC600 SP 0

I did finally resolve my problem with input from OS which is listed below.
You're using the latest version of ST-PI. There's no patch levels
available to download in this moment. To solve this issue I ask you to
first apply the latest version of this note below. Please, read
carefully step by step this note below and follow all the procedures.
Number 1172948
Short text SAP Solution Manager - Basic functions
After you applied the central note, I ask you to apply these notes belowWhen you had all these notes applied, this issue will be solved.
Number 1274287
Short text End-to-End Diagnostics SP18
Number 1244225
Short text Solution Manager 7.0 EhP 1: recommended
corrections
Please, apply the latest patch level for lmservice too.

Similar Messages

SOLMAN_SETUP - Managed System Configuration - DBA_COCKPIT

Dear SAP Colleagues,
I am currently implementing SMD in my Solution Manager system. I use the guided procedure SOLMAN_SETUP. The first 2 phases - Initial and Basic Configuration are completed.
I have starting the 3rd one - Managed System Configuration - Manual Configuration.
I have started the "Configure DBA Cockpit".
I have no problem with most of my managed systems (ERP, BI, EP)..
But when I want to configure the DBA cockpit for my PI systems, I get error.
Even if I personnaly there is nothing to do with the SAP Product, I get an error when I want to configure my all 3 PI system in DBA Cockpit.
1. I select the Managed System in my list
. The DB Host Name is automatically filled out.
. The DB Name is automatically filled out.
. The Schema Name (Optional) is also automatically filled out.
2. Then I click on Next button and I get this error :
The DB connection is no successfully tested.
Please make sure the parameters below are correct and hit ....
Database Name : XDS
Datbase host : xdsci
TNS Name : ???
User Name : SAPXDS
Password : ???
Question :
1. From where (SLD or SMSY) these information (Database Name, Database Host, TNS Name ...)
related to managed system XDS are uploaded ?
In other terms, where are these technical information pre-configured ? In SLD ? In SMSY ?
2. How may I fix this issue ? I did not configure the other managed system and it perfectly works.
Thanks in advance for your help
Best regards
CP

Hi,
I found this OSS Note : 1265070
You can also connect directly to this link :
https://websmp207.sap-ag.de/~sapidb/011000358700000074392009E
Best regards
CP

SOLMAN_SETUP - managed system configuration

I am attempting to use the SOLMAN_SETUP transaction to establish the managed system connections to my ABAP ECC systems. I enter the required user/password info and execute it. I get one error message in the log that says "Cannot get fully qualified name of the server as400q3". The as400Q3 server is the host where the managed system resides. I do not know where to fix this issue.
Best regards,
Russ

Hi ,
You have to mention it in Txn. SMSY- Server->as400q3->Fully qualified host name.
Also, Please make sure the host file entries are maintained correclty on your solman server.
Hope this helps.
Kindly revert if you face any issues.
Thanks,
Jagan

Managed system configuration, step:Check Prerequisites

hi firends,
We've updated our SLM system up to SP13 and import finished success.
When we starts managed system conf from menu SOLMAN_SETUP - Managed System Configuration - Configure System - Check Prerequisites, execution return error that system prerequisites are not fullfilled.
But from menu Status all SP's are correct
Additionally screenshot added to attachment
please help me to resolve this problem.
P.S. all other steps in Managed system conf wizard finished Success.
Thanks in advance
Shahin

Hi Matthias,
Please review SAP Note 1571442 as it might be helpful in resolving this error message.

SOLMAN_SETUP Wizard - Error on Managed System Configuration

Hi all,
I've installed SAP Solution Manager 7.0 EHP1 (Stack 19) on linux-oracle.
After I start the configuration with SOLMAN_SETUP tcode.
The "Initial Configuration" and the "Basic Configuration" phases are termined with success.
In the third phase "Managed System Configuration", I try to connect itself on client 001 but when I try to generate the RFC Connection I received an error message on wizard when the system create the "Back RFC Destination". If I check this RFC on SM59 tcode it works!!!! I don't understand why I received the error message during the wizard.
Then on "Check Prerequisites" I execute the "Diagnostic Prerequisites" phase and I received 2 error messages:
a) The Introscope Enterprise Manager configuration cannot be loaded. Details:
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration. at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251) at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415) at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461) at com.sap.sup.admin.wily.jdbc.EMOverview.getAllEMgrs(EMOverview.java:220) at com.sap.sup.admin.selfcheck.checks.wily.em.EmJdbcCheck.process(EmJdbcCheck.java:32) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165) at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781) at java.lang.Thread.run(Thread.java:770)
b) The RFC Read Destination is not available for connection to Satellite System (RC=2). Details:
Please check SAP Note 1106900
I find The RFC Read Destination on SM59 tcode and it works if I try to "Connection Test".
Could you please help me to check the two errors??
Thanks in advanced
Moreno

Some more info when I tried to run the setup wizard again.
Step Wilyhost Agent Details
Setup Exception: Empty or no Wily EM host retrieved from secured global config! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination XXX|hostname_xxx_01
Created action xxx -XXX AbapSystem
Created action xxx|hostname_xxx_01 - XXX|hostname_xxx_01 AbapInstance
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exceptions
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:269)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:440)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:87)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:110)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:416)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:328)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:545)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1680)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1950)
at java.lang.Thread.run(Thread.java:571)
hostname is the hostname of the system, i removed it.
xxx is the solution manager sid.

Managed System Configuration - PI7.1 system solman_setup

HI all,
In trying to execute the step "Managed System Configuration" for a PI7.1 system in Solution Manager SOLMAN_SETUP, in the first step to "maintain the connection", its failing immediately with:
Error when opening an RFC connection
Establish connection to System <hostname>(01) - <SID>_001
Any ideas?
Thanks, Neeta

Hello Neeta,
i face the same problem.
Establish connection to System <hostname>(01) - <SID>_001
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=726 Gateway ist not connected to the l...
i check the following and they are all fine.
- ping to PI from solman
- PI IP address in SMSY
Could you tell me which part you configured in SMSY?
regards

Plug-in status not performed in Managed system configuration

Dear Experts,
I had configured Managed system configuration in SolMan 7.1 SP10. I could find plug-in status " not performed" (grey) in solman_setup screen . Below screenshot for your reference. I had highlighted the plug-in status in blue for easy recognition. Please provide your valuable inputs.
Thanks,
Phani.

Hi Phani,
It is an open issue, pls see below; you might have to hang on till SP12 is available.
1954303 - The Plug-in Status (ST-A/PI) Grey for Managed System In Solution Manager SP10 and SP11.
A fix for this issue is planned for SP12, please note that this is subject to change
Regards,
Vivek

I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

Software Prerequisites in managed system configuration are not fulfilled

Hello dear Forum,
I'm facing a problem when I configure a PI system in managed system configuration. I register the Netweaver PI AS ABAP technical system to solman's SLD directly(run RZ70), and collect the information of the Netweaver PI AS JAVA from the PI's sld. I don't know whether it matters.
The following error occurs when I Check Prerequisites:
J2EE-FRMW does not fulfill the prerequisites (installed: 7.11 SP0, expected: 7.11 SP001)
But I don't know how to find J2EE-FRMW 7.11 SP001 and do some update, please give me some advice.
Best regards and thanks for your help,
Pany

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Managed System Configuration - Software version and OS is not accepting

Dear
When i try to setup the PI system in solman 7.1 - Managed system configuration, below the error msg.
Please help to sort it the problem
Regards
Jay

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Managed system Configuration Diagnostics Prerequisites check fail

Dear All,
My solman_setup initial configuration part and basic configuration part all passed without error. And when I do the managed system configuration part , first I choose the solution manager itself and the client 001 to config , and then the maintain connection passed OK , but in the next step , check Prerequisites, it fails. The Navigation Button just open a link to the SAP Service Market Place, and the IMG documentation just let me to see the note 1010428. The deatl part of the execuation result of the Prerequisites open a page but with error statement as below :
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any comment will be appreciated.
Enddy.

Hello Enddy,
This sounds as if you have yet to configure the HTTP services in SPRO or have misconfigured them. Please review your configuration for the HTTP Services as it should resolve your issue.
Please review the diagnostics URL to see if it helps you out:
http://service.sap.com/diagnostics
Also, please review the following SAP Notes which will also guide you through diagnostics and solution manager setup/installation:
1010428 End-to-End Diagnostics
1145779 SAP Solution Manager 7.0 Installation
1163836 Solution Manager Diagnostics required for troubleshooting
Also pay attention to the relevant notes listed on the bottom of these. If you follow these documents, I'm sure you will have your issue resolved.
Hope this helps you out!
Thanks,
Mark

Managed System configuration in Solman 7.1 sp11??

Hi All,
I have done new installation of solman 7.1 and upgraded to sp11.
I did system preparation and basis configuration in solman_setup.
I have one query how to add ERP production system to SLD and how to do managed system configuration for that.
I want to add ERP Production system and Managed configuration for that and MOPZ,EWA configuration ERP Production system.
Please help me in this...
Here i attached screen shot for your reference.
Presently in managed system Only Solman system is visible.
Thank in Advance
Chandra

Hi,
Please chekc th ebelow guide
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://websmp104.sap-ag.de/~iron/fm/011000358700000209862011E/012002523100005267752014WRK2?TMP=1407918324257#bkm_show1_…
go to Configuration of SAP Solution Manager
Normally y this demo and guide will be available http://service.sap.com/rkt-solman
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Normally after addition in SLD ,system will adding the system in LMDB ,then added in smsy automatically. check the Job LMDB*
Update the CR content in SLD , check th below note fpor the smae.
Note 669669 - Updating the SAP Component Repository in the SLD
LMDB FQA:
Landscape Management Database (LMDB) – FAQ
Product system Editor in LMDB:
New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki
Rg,
Karthik

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Similar Messages

Maybe you are looking for