Solman Setup system Monitoring alert threshold value for Filesystem issue
Hi,
Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
The same works fine for filessytems if target system OS is unix.
I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.
Hi Sonal
when you want to save the thresholds for only the one MTE you set
you need to click on
EDIT
-> PROPERTIES
-> USE FOR INDIVIDUAL MTE
Kind Regards
Marius
Similar Messages
-
How to setup system monitoring of EP 7 to Solution Manger 7.0
Hi Experts,
I need help for configuring EP 7 (only JAVA engine) for system to Solution Manger 7.0. IF anyone of you have steps or config guide pls help me ???Hi Vikas,
In general, system monitoring in SAP Solution Manager use CCMS as the data supplier, which means that, you need to configure CCMS alert infrastructure for your EP system.
General steps:
1. Configure solution manager or other ABAP system as the CEN (central) system as the CCMS infrastructure.
2. Install SAPCCMSR agent (which is part of CCMS Agent), and connect the agent to CEN system
3. Setup system monitoring in Solution Manager
For more information, you can access the help portal of SAP.
Hope that helps.
Thanks, Jett -
Solution Manager Setup System Monitoring DB Administrating Alerts
Greetings experts
Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
Satellite system (FSD) database MTE's are all active (RZ20).
Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
Service: Setup System Monitoring
Tree:
Setup System Monitoring
+--> SAP System FSD 1320011126
+--> Database FSD-DATABASE
|
+--> Administrating DB FSD-DATABASE (DB2 6000)
Issue: DB Administrating Alerts do not display.
*Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
Regards
Peter BabbingtonHI
1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to MTE class of satellite systems.
2. How do i configure this out of solution manager, and bypassing the satellite system?
You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
Also go through the links
http://service.sap.com/moniotring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
Thanks
Prince Jose -
Setup and configuration for system monitoring and IT Reporting for Java sys
Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
NeniHI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help -
Setup Central System Administratin and Setup System Monitoring grayed out
When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai -
'Setup System Monitoring' option is disabled in solution manager
Hello,
I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
Thank you in advance.
Sameer
Edited by: Sameer Pant on Mar 19, 2011 1:07 AMHi Lakshmi,
But when i right click on the qualifier
No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
Right Click on Compound field & choose option Set Qualified Update.
New Links: Create
Existing Links: Update (All Mapped Qualifiers)
Thanks,
Maheshwari -
Setup system monitoring wrong text
Dear all,
After implementing Basis patch SAPKB70011 togather with SAPKITL420, Solution Manager system displays wrong text for Alerts in SOLUTION_MANAGER transaction -> Solution Monitoring-> System monitoring -> Operation setup in Setup system monitoring.
expl: for Setup Monitoring for SAP System... all rows shows the same Spool wait time
for Errors / Administrating of ... all rows shows the same Abap error in update
and every time this text is changed when I execute Setup system monitoring.
Should I implement SAPKITL421, SAPKITL422, and SAPKITL423 and are these patches connected with SAPKB70012, SAPKB70013, .. ? Is it necesary when implementing SAPKITL421 to be togather with SAPKB70012 and equivalent, because when I tried to implement SAPKB70011 alone it shows that there is a conflict with the add-on SAPKITL420 and muste be also implemented.
Thank you in advance.
Best regards,
RuzicaHello,
Does anyone knows sometinhg about the connection between SAPKITL- and basis patches SAPKB700?
If I need to implement SAPKITL--- patches should I also implement Basis patches?
Regards,
Ruzica -
Hello,
I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
Thank you in advance.Hello,
If your System Monitoring seems disabled, have you performed the IMG activities in transaction SPRO for system monitoring?
SPRO > SAP Solution Manager > Scenario-Specific Settings > System Monitoring
If you have not performed these activities, you will need to....and there is Requirements and Prerequisite documentation once you navigate there.
If this is done, System Monitoring should not be disabled. If you have not defined the systems in SMSY or added them to a solution you will not be able to setup monitoring, but it should nto be disabled, just have nothing to do.
So I would start with the SPRO activities and check the Requirements and Prerequisite have been met and the listed notes applied (949293 and 420213). If this has been done, then make sure you have systems in your solution and if they are not production systems, then you must manually set the status to "Put in Solution" in the solution to be able to use them in system monitoring.
It sounds like your IMG activities in SPRO have not been done.
REgards,
Paul -
Setup system monitoring in dswp
Hi,
One of my ecc qa system in not coming in setup system monitoring of dswp. I have included this ecc qa satelite system in smsy and MOPz is working fine for that system. But it is not coming in setup system monitioring. Actually I want to administer the systems centrally from solman.
I am able to get the ecc dev system in set system monitoring.
Regards,
SudipHi,
we should create one logical comp for one product systems of Dev,qua,prd ( For ERP dev,qua,prd 1 logical comp, for PI dev,qua,prd 1 logical comp)
regarding your solution monitoring thing, have you assigned the logical component to your solution?chk the below
[https://websmp101.sap-ag.de/sapidb/011000358700001873212008E|https://websmp101.sap-ag.de/sapidb/011000358700001873212008E]
For your auto fill of created by,have you created BP for curresponding users in solman? and define the "Partner Determination Procedure" for the reporter as "User".(remove the old one as 'SAP Service : Determination via IBase/Ind. Object for Ref. Object Set' and set to user)
Please check and update
Thanks,
Jansi -
How to set threshold value for single tablespace in grid control 11g
Hi,
I want to set the threshold value for a single tablespace in grid control 11g,
please provide me a navigation path.Sandy wrote:
Can you please provide me the full navigation path?go to Targets --> Databases
Select the Database you like to set this alert for
Select link Metrics and Policy Settings -
Setup System Monitoring -- How to transfer Information J2EE
Hi Experts,
I got an issue trying to transfer information of satellite system (J2EE) to Solution Manager ->Operation Setup->Setup System Monitoring
I installed the ccmsr agent and tx RZ20 shows the information of the alerts, but I can see it in Setup System Monitoring.
On the other hand I added the systems in SMSY.
Regards.In tx rz20 we have to copy the information of each MTE and select properties, then paste that in the third row (agent name) of the alert and save.
-
Setup System Monitoring link disappear in DSWP
Hi All!
Could anybody help me?
I try to setup System Monitoring. But when I selected System Monitoring tab I saw Setup System Monitoring link disappear.
Thanks for your advance,
Alexander GaniiishevHi,
Since this involves some screen steps, I highly recommend you to have a look at this blog link
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0904017550DB01570500522935060780End?blog=/pub/wlg/3544
Hope this helps.
Cheers
SH -
Threshold value for price changes
hello,
We are trying to change the price for material and getting error Threshold value for price changes was exceeded
msg no is CKPRCH 032
Being Sd guy I'm not able to understand where we need to check and what changes to be done
Please guide
Regards
Vishal JajooDear friend
For that u check the following path
spro>> material management>> logistics invoice verification>>invoice block>>> stochastic block
please check here for your plant your activated, if you activated then this error will appear
regards
Pramod -
Is there a threshold value for a tablespace
Hi All,
Is there a threshold value for a tablespace
like Free space must be % Free
Bz i have only 9MB of free Space
Please clarify me.
Thanks
ArjunHi arjun, once your data reaches the threshold value of tablespace free space automatically it will throw error. so there is no specific value for that. but you need to keep an eye on free space so as to avoid any interruption for the transactions. even the transaction will resume if you enable resumable management and adding a datafile or resizing a datafile when transaction halts.then your transaction will continue as normal.
-
Solman 7.0 : setup system monitoring
hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regardshi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance
Maybe you are looking for
-
HDMI output not working after 1.0.8.6067 update on sharp LCD TV's
Have three TV's two of which are Sharps Aquos and the other is a Samsung. After updating to 1.0.8.6067 the Playbook cannot detect the two Sharps(each different model #'s) . I have three different cables that worked fine before the update and all thre
-
Every time I paste bullets into a text field, they revert to a strange character like a "Y", although they look fine in the edit field. Ideas?
-
I facing one situtation in mapping Custmosied IDOC a new segment is add t
HI Gurus I facing one situtation in mapping Custmosied IDOC a new segment is add to that IDOC.... i want to display values in queues in mapping test.. but queue is empty it showing ,,, already i have checked IDX2 .. in that it is updated about the
-
Error when trying to deploy ADF application in Java Cloud Service - SaaS Extension
Hello guys, I'm trying to deploy a simple ADF application in "Oracle Java Cloud Service - SaaS Extension" and i'm still having the error below The job turns to Failed at "Deploy Application" step: Did someone already got this error ? Thanks at advanc
-
Poor customer service in Manchester N.H store
I always go into this store. I have spent upwards of $20,000 in this store in the past 5 years. I went in today to purchase an iPad mini and received zero help. Everyone would just walk by and avoid eye contact. Over 30 minutes waiting for help and n